Danger-alarm/SOFTWARE-FreeRTOS/Common/drivers/Atmel/at91lib/peripherals/dbgu/dbgu.c
2024-06-03 16:27:41 +08:00

157 lines
5.8 KiB
C

/* ----------------------------------------------------------------------------
* ATMEL Microcontroller Software Support
* ----------------------------------------------------------------------------
* Copyright (c) 2008, Atmel Corporation
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the disclaimer below.
*
* Atmel's name may not be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
* ----------------------------------------------------------------------------
*/
//------------------------------------------------------------------------------
// Headers
//------------------------------------------------------------------------------
#include "dbgu.h"
#include <stdarg.h>
#include <board.h>
//------------------------------------------------------------------------------
// Exported functions
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
/// Initializes the DBGU with the given parameters, and enables both the
/// transmitter and the receiver.
/// \param mode Operating mode to configure (see <Modes>).
/// \param baudrate Desired baudrate.
/// \param mck Frequency of the system master clock.
//------------------------------------------------------------------------------
void DBGU_Configure(unsigned int mode,
unsigned int baudrate,
unsigned int mck)
{
// Reset & disable receiver and transmitter, disable interrupts
AT91C_BASE_DBGU->DBGU_CR = AT91C_US_RSTRX | AT91C_US_RSTTX;
AT91C_BASE_DBGU->DBGU_IDR = 0xFFFFFFFF;
// Configure baud rate
AT91C_BASE_DBGU->DBGU_BRGR = mck / (baudrate * 16);
// Configure mode register
AT91C_BASE_DBGU->DBGU_MR = mode;
// Disable DMA channel
AT91C_BASE_DBGU->DBGU_PTCR = AT91C_PDC_RXTDIS | AT91C_PDC_TXTDIS;
// Enable receiver and transmitter
AT91C_BASE_DBGU->DBGU_CR = AT91C_US_RXEN | AT91C_US_TXEN;
}
//------------------------------------------------------------------------------
/// Outputs a character on the DBGU line.
/// \param c Character to send.
//------------------------------------------------------------------------------
static void DBGU_PutChar(unsigned char c)
{
// Wait for the transmitter to be ready
while ((AT91C_BASE_DBGU->DBGU_CSR & AT91C_US_TXEMPTY) == 0);
// Send character
AT91C_BASE_DBGU->DBGU_THR = c;
// Wait for the transfer to complete
while ((AT91C_BASE_DBGU->DBGU_CSR & AT91C_US_TXEMPTY) == 0);
}
//------------------------------------------------------------------------------
/// Reads and returns a character from the DBGU.
//------------------------------------------------------------------------------
unsigned char DBGU_GetChar()
{
while ((AT91C_BASE_DBGU->DBGU_CSR & AT91C_US_RXRDY) == 0);
return AT91C_BASE_DBGU->DBGU_RHR;
}
#ifndef NOFPUT
#include <stdio.h>
//------------------------------------------------------------------------------
/// Implementation of fputc using the DBGU as the standard output. Required
/// for printf().
/// Returns the character written if successful, or -1 if the output stream is
/// not stdout or stderr.
/// \param c Character to write.
/// \param pStream Output stream.
//------------------------------------------------------------------------------
signed int fputc(signed int c, FILE *pStream)
{
if ((pStream == stdout) || (pStream == stderr)) {
DBGU_PutChar(c);
return c;
}
else {
return EOF;
}
}
//------------------------------------------------------------------------------
/// Implementation of fputs using the DBGU as the standard output. Required
/// for printf(). Does NOT currently use the PDC.
/// Returns the number of characters written if successful, or -1 if the output
/// stream is not stdout or stderr.
/// \param pStr String to write.
/// \param pStream Output stream.
//------------------------------------------------------------------------------
signed int fputs(const char *pStr, FILE *pStream)
{
signed int num = 0;
while (*pStr != 0) {
if (fputc(*pStr, pStream) == -1) {
return -1;
}
num++;
pStr++;
}
return num;
}
#undef putchar
//------------------------------------------------------------------------------
/// Outputs a character on the DBGU. Returns the character itself.
/// \param c Character to output.
//------------------------------------------------------------------------------
signed int putchar(signed int c)
{
return fputc(c, stdout);
}
#endif //#ifndef NOFPUT