Danger-alarm/SOFTWARE-FreeRTOS/Common/drivers/LuminaryMicro/hw_ints.h
2024-06-03 16:27:41 +08:00

135 lines
6.6 KiB
C

//*****************************************************************************
//
// hw_ints.h - Macros that define the interrupt assignment on Stellaris.
//
// Copyright (c) 2005-2008 Luminary Micro, Inc. All rights reserved.
//
// Software License Agreement
//
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
// exclusively on LMI's microcontroller products.
//
// The software is owned by LMI and/or its suppliers, and is protected under
// applicable copyright laws. All rights are reserved. You may not combine
// this software with "viral" open-source software in order to form a larger
// program. Any use in violation of the foregoing restrictions may subject
// the user to criminal sanctions under applicable laws, as well as to civil
// liability for the breach of the terms and conditions of this license.
//
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 2523 of the Stellaris Peripheral Driver Library.
//
//*****************************************************************************
#ifndef __HW_INTS_H__
#define __HW_INTS_H__
//*****************************************************************************
//
// The following are defines for the fault assignments.
//
//*****************************************************************************
#define FAULT_NMI 2 // NMI fault
#define FAULT_HARD 3 // Hard fault
#define FAULT_MPU 4 // MPU fault
#define FAULT_BUS 5 // Bus fault
#define FAULT_USAGE 6 // Usage fault
#define FAULT_SVCALL 11 // SVCall
#define FAULT_DEBUG 12 // Debug monitor
#define FAULT_PENDSV 14 // PendSV
#define FAULT_SYSTICK 15 // System Tick
//*****************************************************************************
//
// The following are defines for the interrupt assignments.
//
//*****************************************************************************
#define INT_GPIOA 16 // GPIO Port A
#define INT_GPIOB 17 // GPIO Port B
#define INT_GPIOC 18 // GPIO Port C
#define INT_GPIOD 19 // GPIO Port D
#define INT_GPIOE 20 // GPIO Port E
#define INT_UART0 21 // UART0 Rx and Tx
#define INT_UART1 22 // UART1 Rx and Tx
#define INT_SSI0 23 // SSI0 Rx and Tx
#define INT_I2C0 24 // I2C0 Master and Slave
#define INT_PWM_FAULT 25 // PWM Fault
#define INT_PWM0 26 // PWM Generator 0
#define INT_PWM1 27 // PWM Generator 1
#define INT_PWM2 28 // PWM Generator 2
#define INT_QEI0 29 // Quadrature Encoder 0
#define INT_ADC0 30 // ADC Sequence 0
#define INT_ADC1 31 // ADC Sequence 1
#define INT_ADC2 32 // ADC Sequence 2
#define INT_ADC3 33 // ADC Sequence 3
#define INT_WATCHDOG 34 // Watchdog timer
#define INT_TIMER0A 35 // Timer 0 subtimer A
#define INT_TIMER0B 36 // Timer 0 subtimer B
#define INT_TIMER1A 37 // Timer 1 subtimer A
#define INT_TIMER1B 38 // Timer 1 subtimer B
#define INT_TIMER2A 39 // Timer 2 subtimer A
#define INT_TIMER2B 40 // Timer 2 subtimer B
#define INT_COMP0 41 // Analog Comparator 0
#define INT_COMP1 42 // Analog Comparator 1
#define INT_COMP2 43 // Analog Comparator 2
#define INT_SYSCTL 44 // System Control (PLL, OSC, BO)
#define INT_FLASH 45 // FLASH Control
#define INT_GPIOF 46 // GPIO Port F
#define INT_GPIOG 47 // GPIO Port G
#define INT_GPIOH 48 // GPIO Port H
#define INT_UART2 49 // UART2 Rx and Tx
#define INT_SSI1 50 // SSI1 Rx and Tx
#define INT_TIMER3A 51 // Timer 3 subtimer A
#define INT_TIMER3B 52 // Timer 3 subtimer B
#define INT_I2C1 53 // I2C1 Master and Slave
#define INT_QEI1 54 // Quadrature Encoder 1
#define INT_CAN0 55 // CAN0
#define INT_CAN1 56 // CAN1
#define INT_CAN2 57 // CAN2
#define INT_ETH 58 // Ethernet
#define INT_HIBERNATE 59 // Hibernation module
#define INT_USB0 60 // USB 0 Controller
#define INT_PWM3 61 // PWM Generator 3
#define INT_UDMA 62 // uDMA controller
#define INT_UDMAERR 63 // uDMA Error
//*****************************************************************************
//
// The following are defines for the total number of interrupts.
//
//*****************************************************************************
#define NUM_INTERRUPTS 64
//*****************************************************************************
//
// The following are defines for the total number of priority levels.
//
//*****************************************************************************
#define NUM_PRIORITY 8
#define NUM_PRIORITY_BITS 3
//*****************************************************************************
//
// The following definitions are deprecated.
//
//*****************************************************************************
#ifndef DEPRECATED
//*****************************************************************************
//
// The following are deprecated defines for the interrupt assignments.
//
//*****************************************************************************
#define INT_SSI 23 // SSI Rx and Tx
#define INT_I2C 24 // I2C Master and Slave
#define INT_QEI 29 // Quadrature Encoder
#endif
#endif // __HW_INTS_H__