EBIKE-FreeRTOS/Common/Minimal/crflash.c

219 lines
7.9 KiB
C
Raw Normal View History

2024-04-14 18:38:39 +08:00
/*
* FreeRTOS V202212.00
* Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy of
* this software and associated documentation files (the "Software"), to deal in
* the Software without restriction, including without limitation the rights to
* use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
* the Software, and to permit persons to whom the Software is furnished to do so,
* subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
* COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
* IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* https://www.FreeRTOS.org
* https://github.com/FreeRTOS
*
*/
/*
* This demo application file demonstrates the use of queues to pass data
* between co-routines.
*
* N represents the number of 'fixed delay' co-routines that are created and
* is set during initialisation.
*
* N 'fixed delay' co-routines are created that just block for a fixed
* period then post the number of an LED onto a queue. Each such co-routine
* uses a different block period. A single 'flash' co-routine is also created
* that blocks on the same queue, waiting for the number of the next LED it
* should flash. Upon receiving a number it simply toggle the instructed LED
* then blocks on the queue once more. In this manner each LED from LED 0 to
* LED N-1 is caused to flash at a different rate.
*
* The 'fixed delay' co-routines are created with co-routine priority 0. The
* flash co-routine is created with co-routine priority 1. This means that
* the queue should never contain more than a single item. This is because
* posting to the queue will unblock the 'flash' co-routine, and as this has
* a priority greater than the tasks posting to the queue it is guaranteed to
* have emptied the queue and blocked once again before the queue can contain
* any more date. An error is indicated if an attempt to post data to the
* queue fails - indicating that the queue is already full.
*
*/
/* Scheduler includes. */
#include "FreeRTOS.h"
#include "croutine.h"
#include "queue.h"
/* Demo application includes. */
#include "partest.h"
#include "crflash.h"
/* The queue should only need to be of length 1. See the description at the
* top of the file. */
#define crfQUEUE_LENGTH 1
#define crfFIXED_DELAY_PRIORITY 0
#define crfFLASH_PRIORITY 1
/* Only one flash co-routine is created so the index is not significant. */
#define crfFLASH_INDEX 0
/* Don't allow more than crfMAX_FLASH_TASKS 'fixed delay' co-routines to be
* created. */
#define crfMAX_FLASH_TASKS 8
/* We don't want to block when posting to the queue. */
#define crfPOSTING_BLOCK_TIME 0
#if ( configUSE_CO_ROUTINES == 1 )
/*
* The 'fixed delay' co-routine as described at the top of the file.
*/
static void prvFixedDelayCoRoutine( CoRoutineHandle_t xHandle,
UBaseType_t uxIndex );
/*
* The 'flash' co-routine as described at the top of the file.
*/
static void prvFlashCoRoutine( CoRoutineHandle_t xHandle,
UBaseType_t uxIndex );
/* The queue used to pass data between the 'fixed delay' co-routines and the
* 'flash' co-routine. */
static QueueHandle_t xFlashQueue;
/* This will be set to pdFALSE if we detect an error. */
static BaseType_t xCoRoutineFlashStatus = pdPASS;
/*-----------------------------------------------------------*/
/*
* See the header file for details.
*/
void vStartFlashCoRoutines( UBaseType_t uxNumberToCreate )
{
UBaseType_t uxIndex;
if( uxNumberToCreate > crfMAX_FLASH_TASKS )
{
uxNumberToCreate = crfMAX_FLASH_TASKS;
}
/* Create the queue used to pass data between the co-routines. */
xFlashQueue = xQueueCreate( crfQUEUE_LENGTH, sizeof( UBaseType_t ) );
if( xFlashQueue )
{
/* Create uxNumberToCreate 'fixed delay' co-routines. */
for( uxIndex = 0; uxIndex < uxNumberToCreate; uxIndex++ )
{
xCoRoutineCreate( prvFixedDelayCoRoutine, crfFIXED_DELAY_PRIORITY, uxIndex );
}
/* Create the 'flash' co-routine. */
xCoRoutineCreate( prvFlashCoRoutine, crfFLASH_PRIORITY, crfFLASH_INDEX );
}
}
/*-----------------------------------------------------------*/
static void prvFixedDelayCoRoutine( CoRoutineHandle_t xHandle,
UBaseType_t uxIndex )
{
/* Even though this is a co-routine the xResult variable does not need to be
* static as we do not need it to maintain its state between blocks. */
BaseType_t xResult;
/* The uxIndex parameter of the co-routine function is used as an index into
* the xFlashRates array to obtain the delay period to use. */
static const TickType_t xFlashRates[ crfMAX_FLASH_TASKS ] =
{
150 / portTICK_PERIOD_MS,
200 / portTICK_PERIOD_MS,
250 / portTICK_PERIOD_MS,
300 / portTICK_PERIOD_MS,
350 / portTICK_PERIOD_MS,
400 / portTICK_PERIOD_MS,
450 / portTICK_PERIOD_MS,
500 / portTICK_PERIOD_MS
};
/* Co-routines MUST start with a call to crSTART. */
crSTART( xHandle );
for( ; ; )
{
/* Post our uxIndex value onto the queue. This is used as the LED to
* flash. */
crQUEUE_SEND( xHandle, xFlashQueue, ( void * ) &uxIndex, crfPOSTING_BLOCK_TIME, &xResult );
if( xResult != pdPASS )
{
/* For the reasons stated at the top of the file we should always
* find that we can post to the queue. If we could not then an error
* has occurred. */
xCoRoutineFlashStatus = pdFAIL;
}
crDELAY( xHandle, xFlashRates[ uxIndex ] );
}
/* Co-routines MUST end with a call to crEND. */
crEND();
}
/*-----------------------------------------------------------*/
static void prvFlashCoRoutine( CoRoutineHandle_t xHandle,
UBaseType_t uxIndex )
{
/* Even though this is a co-routine the variable do not need to be
* static as we do not need it to maintain their state between blocks. */
BaseType_t xResult;
UBaseType_t uxLEDToFlash;
/* Co-routines MUST start with a call to crSTART. */
crSTART( xHandle );
( void ) uxIndex;
for( ; ; )
{
/* Block to wait for the number of the LED to flash. */
crQUEUE_RECEIVE( xHandle, xFlashQueue, &uxLEDToFlash, portMAX_DELAY, &xResult );
if( xResult != pdPASS )
{
/* We would not expect to wake unless we received something. */
xCoRoutineFlashStatus = pdFAIL;
}
else
{
/* We received the number of an LED to flash - flash it! */
vParTestToggleLED( uxLEDToFlash );
}
}
/* Co-routines MUST end with a call to crEND. */
crEND();
}
/*-----------------------------------------------------------*/
BaseType_t xAreFlashCoRoutinesStillRunning( void )
{
/* Return pdPASS or pdFAIL depending on whether an error has been detected
* or not. */
return xCoRoutineFlashStatus;
}
#endif /* if ( configUSE_CO_ROUTINES == 1 ) */