EBIKE-FreeRTOS/Common/ethernet/lwip-1.4.0/ports/win32/sys_arch.c

542 lines
18 KiB
C
Raw Normal View History

2024-04-14 18:38:39 +08:00
/*
* Copyright (c) 2001-2003 Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*
* This file is part of the lwIP TCP/IP stack.
*
* Author: Adam Dunkels <adam@sics.se>
*
*/
//*****************************************************************************
//
// Include OS functionality.
//
//*****************************************************************************
/* ------------------------ System architecture includes ----------------------------- */
#include "arch/sys_arch.h"
/* ------------------------ lwIP includes --------------------------------- */
#include "lwip/opt.h"
#include "lwip/debug.h"
#include "lwip/def.h"
#include "lwip/sys.h"
#include "lwip/mem.h"
#include "lwip/stats.h"
/*---------------------------------------------------------------------------*
* Routine: sys_mbox_new
*---------------------------------------------------------------------------*
* Description:
* Creates a new mailbox
* Inputs:
* int size -- Size of elements in the mailbox
* Outputs:
* sys_mbox_t -- Handle to new mailbox
*---------------------------------------------------------------------------*/
err_t sys_mbox_new( sys_mbox_t *pxMailBox, int iSize )
{
err_t xReturn = ERR_MEM;
*pxMailBox = xQueueCreate( iSize, sizeof( void * ) );
if( *pxMailBox != NULL )
{
xReturn = ERR_OK;
SYS_STATS_INC_USED( mbox );
}
return xReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_mbox_free
*---------------------------------------------------------------------------*
* Description:
* Deallocates a mailbox. If there are messages still present in the
* mailbox when the mailbox is deallocated, it is an indication of a
* programming error in lwIP and the developer should be notified.
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* Outputs:
* sys_mbox_t -- Handle to new mailbox
*---------------------------------------------------------------------------*/
void sys_mbox_free( sys_mbox_t *pxMailBox )
{
unsigned long ulMessagesWaiting;
ulMessagesWaiting = uxQueueMessagesWaiting( *pxMailBox );
configASSERT( ( ulMessagesWaiting == 0 ) );
#if SYS_STATS
{
if( ulMessagesWaiting != 0UL )
{
SYS_STATS_INC( mbox.err );
}
SYS_STATS_DEC( mbox.used );
}
#endif /* SYS_STATS */
vQueueDelete( *pxMailBox );
}
/*---------------------------------------------------------------------------*
* Routine: sys_mbox_post
*---------------------------------------------------------------------------*
* Description:
* Post the "msg" to the mailbox.
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* void *data -- Pointer to data to post
*---------------------------------------------------------------------------*/
void sys_mbox_post( sys_mbox_t *pxMailBox, void *pxMessageToPost )
{
while( xQueueSendToBack( *pxMailBox, &pxMessageToPost, portMAX_DELAY ) != pdTRUE );
}
/*---------------------------------------------------------------------------*
* Routine: sys_mbox_trypost
*---------------------------------------------------------------------------*
* Description:
* Try to post the "msg" to the mailbox. Returns immediately with
* error if cannot.
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* void *msg -- Pointer to data to post
* Outputs:
* err_t -- ERR_OK if message posted, else ERR_MEM
* if not.
*---------------------------------------------------------------------------*/
err_t sys_mbox_trypost( sys_mbox_t *pxMailBox, void *pxMessageToPost )
{
err_t xReturn;
if( xQueueSend( *pxMailBox, &pxMessageToPost, 0UL ) == pdPASS )
{
xReturn = ERR_OK;
}
else
{
/* The queue was already full. */
xReturn = ERR_MEM;
SYS_STATS_INC( mbox.err );
}
return xReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_mbox_fetch
*---------------------------------------------------------------------------*
* Description:
* Blocks the thread until a message arrives in the mailbox, but does
* not block the thread longer than "timeout" milliseconds (similar to
* the sys_arch_sem_wait() function). The "msg" argument is a result
* parameter that is set by the function (i.e., by doing "*msg =
* ptr"). The "msg" parameter maybe NULL to indicate that the message
* should be dropped.
*
* The return values are the same as for the sys_arch_sem_wait() function:
* Number of milliseconds spent waiting or SYS_ARCH_TIMEOUT if there was a
* timeout.
*
* Note that a function with a similar name, sys_mbox_fetch(), is
* implemented by lwIP.
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* void **msg -- Pointer to pointer to msg received
* u32_t timeout -- Number of milliseconds until timeout
* Outputs:
* u32_t -- SYS_ARCH_TIMEOUT if timeout, else number
* of milliseconds until received.
*---------------------------------------------------------------------------*/
u32_t sys_arch_mbox_fetch( sys_mbox_t *pxMailBox, void **ppvBuffer, u32_t ulTimeOut )
{
void *pvDummy;
TickType_t xStartTime, xEndTime, xElapsed;
unsigned long ulReturn;
xStartTime = xTaskGetTickCount();
if( NULL == ppvBuffer )
{
ppvBuffer = &pvDummy;
}
if( ulTimeOut != 0UL )
{
if( pdTRUE == xQueueReceive( *pxMailBox, &( *ppvBuffer ), ulTimeOut/ portTICK_PERIOD_MS ) )
{
xEndTime = xTaskGetTickCount();
xElapsed = ( xEndTime - xStartTime ) * portTICK_PERIOD_MS;
ulReturn = xElapsed;
}
else
{
/* Timed out. */
*ppvBuffer = NULL;
ulReturn = SYS_ARCH_TIMEOUT;
}
}
else
{
while( pdTRUE != xQueueReceive( *pxMailBox, &( *ppvBuffer ), portMAX_DELAY ) );
xEndTime = xTaskGetTickCount();
xElapsed = ( xEndTime - xStartTime ) * portTICK_PERIOD_MS;
if( xElapsed == 0UL )
{
xElapsed = 1UL;
}
ulReturn = xElapsed;
}
return ulReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_mbox_tryfetch
*---------------------------------------------------------------------------*
* Description:
* Similar to sys_arch_mbox_fetch, but if message is not ready
* immediately, we'll return with SYS_MBOX_EMPTY. On success, 0 is
* returned.
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* void **msg -- Pointer to pointer to msg received
* Outputs:
* u32_t -- SYS_MBOX_EMPTY if no messages. Otherwise,
* return ERR_OK.
*---------------------------------------------------------------------------*/
u32_t sys_arch_mbox_tryfetch( sys_mbox_t *pxMailBox, void **ppvBuffer )
{
void *pvDummy;
unsigned long ulReturn;
if( ppvBuffer== NULL )
{
ppvBuffer = &pvDummy;
}
if( pdTRUE == xQueueReceive( *pxMailBox, &( *ppvBuffer ), 0UL ) )
{
ulReturn = ERR_OK;
}
else
{
ulReturn = SYS_MBOX_EMPTY;
}
return ulReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_sem_new
*---------------------------------------------------------------------------*
* Description:
* Creates and returns a new semaphore. The "ucCount" argument specifies
* the initial state of the semaphore.
* NOTE: Currently this routine only creates counts of 1 or 0
* Inputs:
* sys_mbox_t mbox -- Handle of mailbox
* u8_t ucCount -- Initial ucCount of semaphore (1 or 0)
* Outputs:
* sys_sem_t -- Created semaphore or 0 if could not create.
*---------------------------------------------------------------------------*/
err_t sys_sem_new( sys_sem_t *pxSemaphore, u8_t ucCount )
{
err_t xReturn = ERR_MEM;
vSemaphoreCreateBinary( ( *pxSemaphore ) );
if( *pxSemaphore != NULL )
{
if( ucCount == 0U )
{
xSemaphoreTake( *pxSemaphore, 1UL );
}
xReturn = ERR_OK;
SYS_STATS_INC_USED( sem );
}
else
{
SYS_STATS_INC( sem.err );
}
return xReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_sem_wait
*---------------------------------------------------------------------------*
* Description:
* Blocks the thread while waiting for the semaphore to be
* signaled. If the "timeout" argument is non-zero, the thread should
* only be blocked for the specified time (measured in
* milliseconds).
*
* If the timeout argument is non-zero, the return value is the number of
* milliseconds spent waiting for the semaphore to be signaled. If the
* semaphore wasn't signaled within the specified time, the return value is
* SYS_ARCH_TIMEOUT. If the thread didn't have to wait for the semaphore
* (i.e., it was already signaled), the function may return zero.
*
* Notice that lwIP implements a function with a similar name,
* sys_sem_wait(), that uses the sys_arch_sem_wait() function.
* Inputs:
* sys_sem_t sem -- Semaphore to wait on
* u32_t timeout -- Number of milliseconds until timeout
* Outputs:
* u32_t -- Time elapsed or SYS_ARCH_TIMEOUT.
*---------------------------------------------------------------------------*/
u32_t sys_arch_sem_wait( sys_sem_t *pxSemaphore, u32_t ulTimeout )
{
TickType_t xStartTime, xEndTime, xElapsed;
unsigned long ulReturn;
xStartTime = xTaskGetTickCount();
if( ulTimeout != 0UL )
{
if( xSemaphoreTake( *pxSemaphore, ulTimeout / portTICK_PERIOD_MS ) == pdTRUE )
{
xEndTime = xTaskGetTickCount();
xElapsed = (xEndTime - xStartTime) * portTICK_PERIOD_MS;
ulReturn = xElapsed;
}
else
{
ulReturn = SYS_ARCH_TIMEOUT;
}
}
else
{
while( xSemaphoreTake( *pxSemaphore, portMAX_DELAY ) != pdTRUE );
xEndTime = xTaskGetTickCount();
xElapsed = ( xEndTime - xStartTime ) * portTICK_PERIOD_MS;
if( xElapsed == 0UL )
{
xElapsed = 1UL;
}
ulReturn = xElapsed;
}
return ulReturn;
}
/** Create a new mutex
* @param mutex pointer to the mutex to create
* @return a new mutex */
err_t sys_mutex_new( sys_mutex_t *pxMutex )
{
err_t xReturn = ERR_MEM;
*pxMutex = xSemaphoreCreateMutex();
if( *pxMutex != NULL )
{
xReturn = ERR_OK;
SYS_STATS_INC_USED( mutex );
}
else
{
SYS_STATS_INC( mutex.err );
}
return xReturn;
}
/** Lock a mutex
* @param mutex the mutex to lock */
void sys_mutex_lock( sys_mutex_t *pxMutex )
{
while( xSemaphoreTake( *pxMutex, portMAX_DELAY ) != pdPASS );
}
/** Unlock a mutex
* @param mutex the mutex to unlock */
void sys_mutex_unlock(sys_mutex_t *pxMutex )
{
xSemaphoreGive( *pxMutex );
}
/** Delete a semaphore
* @param mutex the mutex to delete */
void sys_mutex_free( sys_mutex_t *pxMutex )
{
SYS_STATS_DEC( mutex.used );
vQueueDelete( *pxMutex );
}
/*---------------------------------------------------------------------------*
* Routine: sys_sem_signal
*---------------------------------------------------------------------------*
* Description:
* Signals (releases) a semaphore
* Inputs:
* sys_sem_t sem -- Semaphore to signal
*---------------------------------------------------------------------------*/
void sys_sem_signal( sys_sem_t *pxSemaphore )
{
xSemaphoreGive( *pxSemaphore );
}
/*---------------------------------------------------------------------------*
* Routine: sys_sem_free
*---------------------------------------------------------------------------*
* Description:
* Deallocates a semaphore
* Inputs:
* sys_sem_t sem -- Semaphore to free
*---------------------------------------------------------------------------*/
void sys_sem_free( sys_sem_t *pxSemaphore )
{
SYS_STATS_DEC(sem.used);
vQueueDelete( *pxSemaphore );
}
/*---------------------------------------------------------------------------*
* Routine: sys_init
*---------------------------------------------------------------------------*
* Description:
* Initialize sys arch
*---------------------------------------------------------------------------*/
void sys_init(void)
{
}
u32_t sys_now(void)
{
return xTaskGetTickCount();
}
/*---------------------------------------------------------------------------*
* Routine: sys_thread_new
*---------------------------------------------------------------------------*
* Description:
* Starts a new thread with priority "prio" that will begin its
* execution in the function "thread()". The "arg" argument will be
* passed as an argument to the thread() function. The id of the new
* thread is returned. Both the id and the priority are system
* dependent.
* Inputs:
* char *name -- Name of thread
* void (* thread)(void *arg) -- Pointer to function to run.
* void *arg -- Argument passed into function
* int stacksize -- Required stack amount in bytes
* int prio -- Thread priority
* Outputs:
* sys_thread_t -- Pointer to per-thread timeouts.
*---------------------------------------------------------------------------*/
sys_thread_t sys_thread_new( const char *pcName, void( *pxThread )( void *pvParameters ), void *pvArg, int iStackSize, int iPriority )
{
TaskHandle_t xCreatedTask;
portBASE_TYPE xResult;
sys_thread_t xReturn;
xResult = xTaskCreate( pxThread, pcName, iStackSize, pvArg, iPriority, &xCreatedTask );
if( xResult == pdPASS )
{
xReturn = xCreatedTask;
}
else
{
xReturn = NULL;
}
return xReturn;
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_protect
*---------------------------------------------------------------------------*
* Description:
* This optional function does a "fast" critical region protection and
* returns the previous protection level. This function is only called
* during very short critical regions. An embedded system which supports
* ISR-based drivers might want to implement this function by disabling
* interrupts. Task-based systems might want to implement this by using
* a mutex or disabling tasking. This function should support recursive
* calls from the same task or interrupt. In other words,
* sys_arch_protect() could be called while already protected. In
* that case the return value indicates that it is already protected.
*
* sys_arch_protect() is only required if your port is supporting an
* operating system.
* Outputs:
* sys_prot_t -- Previous protection level (not used here)
*---------------------------------------------------------------------------*/
sys_prot_t sys_arch_protect( void )
{
vPortEnterCritical();
return ( sys_prot_t ) 1;
}
/*---------------------------------------------------------------------------*
* Routine: sys_arch_unprotect
*---------------------------------------------------------------------------*
* Description:
* This optional function does a "fast" set of critical region
* protection to the value specified by pval. See the documentation for
* sys_arch_protect() for more information. This function is only
* required if your port is supporting an operating system.
* Inputs:
* sys_prot_t -- Previous protection level (not used here)
*---------------------------------------------------------------------------*/
void sys_arch_unprotect( sys_prot_t xValue )
{
(void) xValue;
taskEXIT_CRITICAL();
}
/*
* Prints an assertion messages and aborts execution.
*/
void sys_assert( const char *pcMessage )
{
(void) pcMessage;
for (;;)
{
}
}
/*-------------------------------------------------------------------------*
* End of File: sys_arch.c
*-------------------------------------------------------------------------*/