/*
 * FreeRTOS V202212.00
 * Copyright (C) 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */


/**
 * This is a very simple queue test.  See the BlockQ. c documentation for a more
 * comprehensive version.
 *
 * Creates two tasks that communicate over a single queue.  One task acts as a
 * producer, the other a consumer.
 *
 * The producer loops for three iteration, posting an incrementing number onto the
 * queue each cycle.  It then delays for a fixed period before doing exactly the
 * same again.
 *
 * The consumer loops emptying the queue.  Each item removed from the queue is
 * checked to ensure it contains the expected value.  When the queue is empty it
 * blocks for a fixed period, then does the same again.
 *
 * All queue access is performed without blocking.  The consumer completely empties
 * the queue each time it runs so the producer should never find the queue full.
 *
 * An error is flagged if the consumer obtains an unexpected value or the producer
 * find the queue is full.
 *
 * \page PollQC pollQ.c
 * \ingroup DemoFiles
 * <HR>
 */

/*
 * Changes from V2.0.0
 *
 + Delay periods are now specified using variables and constants of
 +    TickType_t rather than unsigned long.
 */

#include <stdlib.h>

/* Scheduler include files. */
#include "FreeRTOS.h"
#include "task.h"
#include "queue.h"
#include "print.h"

/* Demo program include files. */
#include "PollQ.h"

#define pollqSTACK_SIZE    ( ( unsigned short ) configMINIMAL_STACK_SIZE )

/* The task that posts the incrementing number onto the queue. */
static void vPolledQueueProducer( void * pvParameters );

/* The task that empties the queue. */
static void vPolledQueueConsumer( void * pvParameters );

/* Variables that are used to check that the tasks are still running with no errors. */
static volatile short sPollingConsumerCount = 0, sPollingProducerCount = 0;
/*-----------------------------------------------------------*/

void vStartPolledQueueTasks( unsigned portBASE_TYPE uxPriority )
{
    static QueueHandle_t xPolledQueue;
    const unsigned portBASE_TYPE uxQueueSize = 10;

    /* Create the queue used by the producer and consumer. */
    xPolledQueue = xQueueCreate( uxQueueSize, ( unsigned portBASE_TYPE ) sizeof( unsigned short ) );

    /* Spawn the producer and consumer. */
    xTaskCreate( vPolledQueueConsumer, "QConsNB", pollqSTACK_SIZE, ( void * ) &xPolledQueue, uxPriority, NULL );
    xTaskCreate( vPolledQueueProducer, "QProdNB", pollqSTACK_SIZE, ( void * ) &xPolledQueue, uxPriority, NULL );
}
/*-----------------------------------------------------------*/

static void vPolledQueueProducer( void * pvParameters )
{
    unsigned short usValue = 0, usLoop;
    QueueHandle_t * pxQueue;
    const TickType_t xDelay = ( TickType_t ) 200 / portTICK_PERIOD_MS;
    const unsigned short usNumToProduce = 3;
    const char * const pcTaskStartMsg = "Polled queue producer started.\r\n";
    const char * const pcTaskErrorMsg = "Could not post on polled queue.\r\n";
    short sError = pdFALSE;

    /* Queue a message for printing to say the task has started. */
    vPrintDisplayMessage( &pcTaskStartMsg );

    /* The queue being used is passed in as the parameter. */
    pxQueue = ( QueueHandle_t * ) pvParameters;

    for( ; ; )
    {
        for( usLoop = 0; usLoop < usNumToProduce; ++usLoop )
        {
            /* Send an incrementing number on the queue without blocking. */
            if( xQueueSendToBack( *pxQueue, ( void * ) &usValue, ( TickType_t ) 0 ) != pdPASS )
            {
                /* We should never find the queue full - this is an error. */
                vPrintDisplayMessage( &pcTaskErrorMsg );
                sError = pdTRUE;
            }
            else
            {
                if( sError == pdFALSE )
                {
                    /* If an error has ever been recorded we stop incrementing the
                     * check variable. */
                    ++sPollingProducerCount;
                }

                /* Update the value we are going to post next time around. */
                ++usValue;
            }
        }

        /* Wait before we start posting again to ensure the consumer runs and
         * empties the queue. */
        vTaskDelay( xDelay );
    }
}
/*-----------------------------------------------------------*/

static void vPolledQueueConsumer( void * pvParameters )
{
    unsigned short usData, usExpectedValue = 0;
    QueueHandle_t * pxQueue;
    const TickType_t xDelay = ( TickType_t ) 200 / portTICK_PERIOD_MS;
    const char * const pcTaskStartMsg = "Polled queue consumer started.\r\n";
    const char * const pcTaskErrorMsg = "Incorrect value received on polled queue.\r\n";
    short sError = pdFALSE;

    /* Queue a message for printing to say the task has started. */
    vPrintDisplayMessage( &pcTaskStartMsg );

    /* The queue being used is passed in as the parameter. */
    pxQueue = ( QueueHandle_t * ) pvParameters;

    for( ; ; )
    {
        /* Loop until the queue is empty. */
        while( uxQueueMessagesWaiting( *pxQueue ) )
        {
            if( xQueueReceive( *pxQueue, &usData, ( TickType_t ) 0 ) == pdPASS )
            {
                if( usData != usExpectedValue )
                {
                    /* This is not what we expected to receive so an error has
                     * occurred. */
                    vPrintDisplayMessage( &pcTaskErrorMsg );
                    sError = pdTRUE;

                    /* Catch-up to the value we received so our next expected value
                     * should again be correct. */
                    usExpectedValue = usData;
                }
                else
                {
                    if( sError == pdFALSE )
                    {
                        /* Only increment the check variable if no errors have
                         * occurred. */
                        ++sPollingConsumerCount;
                    }
                }

                ++usExpectedValue;
            }
        }

        /* Now the queue is empty we block, allowing the producer to place more
         * items in the queue. */
        vTaskDelay( xDelay );
    }
}
/*-----------------------------------------------------------*/

/* This is called to check that all the created tasks are still running with no errors. */
portBASE_TYPE xArePollingQueuesStillRunning( void )
{
    static short sLastPollingConsumerCount = 0, sLastPollingProducerCount = 0;
    portBASE_TYPE xReturn;

    if( ( sLastPollingConsumerCount == sPollingConsumerCount ) ||
        ( sLastPollingProducerCount == sPollingProducerCount )
        )
    {
        xReturn = pdFALSE;
    }
    else
    {
        xReturn = pdTRUE;
    }

    sLastPollingConsumerCount = sPollingConsumerCount;
    sLastPollingProducerCount = sPollingProducerCount;

    return xReturn;
}