429 lines
17 KiB
C
429 lines
17 KiB
C
/* ----------------------------------------------------------------------------
|
|
* ATMEL Microcontroller Software Support
|
|
* ----------------------------------------------------------------------------
|
|
* Copyright (c) 2008, Atmel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the disclaimer below.
|
|
*
|
|
* Atmel's name may not be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \dir
|
|
/// !Purpose
|
|
///
|
|
/// Definition and functions for using AT91SAM9XE-related features, such
|
|
/// has PIO pins, memories, etc.
|
|
///
|
|
/// !Usage
|
|
/// -# The code for booting the board is provided by board_cstartup.S and
|
|
/// board_lowlevel.c.
|
|
/// -# For using board PIOs, board characteristics (clock, etc.) and external
|
|
/// components, see board.h.
|
|
/// -# For manipulating memories (remapping, SDRAM, etc.), see board_memories.h.
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \unit
|
|
/// !Purpose
|
|
///
|
|
/// Definition of AT91SAM9XE-EK characteristics, AT91SAM9XE-dependant PIOs and
|
|
/// external components interfacing.
|
|
///
|
|
/// !Usage
|
|
/// -# For operating frequency information, see "SAM9XE-EK - Operating frequencies".
|
|
/// -# For using portable PIO definitions, see "SAM9XE-EK - PIO definitions".
|
|
/// -# Several USB definitions are included here (see "SAM9XE-EK - USB device").
|
|
/// -# For external components definitions, see "SAM79260-EK - External components".
|
|
/// -# For memory-related definitions, see "SAM79260-EK - Memories".
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef BOARD_H
|
|
#define BOARD_H
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Headers
|
|
//------------------------------------------------------------------------------
|
|
|
|
#if defined(at91sam9xe128)
|
|
#include "at91sam9xe128/AT91SAM9XE128.h"
|
|
#elif defined(at91sam9xe256)
|
|
#include "at91sam9xe256/AT91SAM9XE256.h"
|
|
#elif defined(at91sam9xe512)
|
|
#include "at91sam9xe512/AT91SAM9XE512.h"
|
|
#else
|
|
#error Board does not support the specified chip.
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Definitions
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - Board Description"
|
|
/// This page lists several definition related to the board description.
|
|
///
|
|
/// !Definitions
|
|
/// - BOARD_NAME
|
|
|
|
/// Name of the board.
|
|
#define BOARD_NAME "AT91SAM9XE-EK"
|
|
/// Board definition.
|
|
#define at91sam9xeek
|
|
/// Family definition.
|
|
#define at91sam9xe
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - Operating frequencies"
|
|
/// This page lists several definition related to the board operating frequency
|
|
/// (when using the initialization done by board_lowlevel.c).
|
|
///
|
|
/// !Definitions
|
|
/// - BOARD_MAINOSC
|
|
/// - BOARD_MCK
|
|
|
|
/// Frequency of the board main oscillator.
|
|
#define BOARD_MAINOSC 18432000
|
|
|
|
/// Master clock frequency (when using board_lowlevel.c).
|
|
#define BOARD_MCK ((18432000 * 97 / 9) / 2)
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - USB device"
|
|
/// This page lists constants describing several characteristics (controller
|
|
/// type, D+ pull-up type, etc.) of the USB device controller of the chip/board.
|
|
///
|
|
/// !Constants
|
|
/// - BOARD_USB_UDP
|
|
/// - BOARD_USB_PULLUP_INTERNAL
|
|
/// - BOARD_USB_NUMENDPOINTS
|
|
/// - BOARD_USB_ENDPOINTS_MAXPACKETSIZE
|
|
/// - BOARD_USB_ENDPOINTS_BANKS
|
|
/// - BOARD_USB_BMATTRIBUTES
|
|
|
|
/// Chip has a UDP controller.
|
|
#define BOARD_USB_UDP
|
|
|
|
/// Indicates the D+ pull-up is internal to the USB controller.
|
|
#define BOARD_USB_PULLUP_INTERNAL
|
|
|
|
/// Number of endpoints in the USB controller.
|
|
#define BOARD_USB_NUMENDPOINTS 6
|
|
|
|
/// Returns the maximum packet size of the given endpoint.
|
|
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE(i) ((i >= 4) ? 512 : 64)
|
|
#define BOARD_USB_ENDPOINTS_MAXPACKETSIZE_FS 64
|
|
|
|
/// Returns the number of FIFO banks for the given endpoint.
|
|
#define BOARD_USB_ENDPOINTS_BANKS(i) (((i == 0) || (i == 3)) ? 1 : 2)
|
|
|
|
/// USB attributes configuration descriptor (bus or self powered, remote wakeup)
|
|
#define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - PIO definitions"
|
|
/// This pages lists all the pio definitions contained in board.h. The constants
|
|
/// are named using the following convention: PIN_* for a constant which defines
|
|
/// a single Pin instance (but may include several PIOs sharing the same
|
|
/// controller), and PINS_* for a list of Pin instances.
|
|
///
|
|
/// !DBGU
|
|
/// - PINS_DBGU
|
|
///
|
|
/// !LEDs
|
|
/// - PIN_LED_0
|
|
/// - PIN_LED_1
|
|
/// - PINS_LEDS
|
|
/// - LED_POWER
|
|
/// - LED_DS1
|
|
///
|
|
/// !Push buttons
|
|
/// - PIN_PUSHBUTTON_1
|
|
/// - PIN_PUSHBUTTON_2
|
|
/// - PINS_PUSHBUTTONS
|
|
/// - PUSHBUTTON_BP1
|
|
/// - PUSHBUTTON_BP2
|
|
///
|
|
/// !USART0
|
|
/// - PIN_USART0_RXD
|
|
/// - PIN_USART0_TXD
|
|
/// - PIN_USART0_SCK
|
|
///
|
|
/// !SPI0
|
|
/// - PIN_SPI0_MISO
|
|
/// - PIN_SPI0_MOSI
|
|
/// - PIN_SPI0_SPCK
|
|
/// - PINS_SPI0
|
|
/// - PIN_SPI0_NPCS0
|
|
/// - PIN_SPI0_NPCS1
|
|
///
|
|
/// !SSC
|
|
/// - PINS_SSC_TX
|
|
///
|
|
/// !USB
|
|
/// - PIN_USB_VBUS
|
|
///
|
|
/// !MCI
|
|
/// - PINS_MCI
|
|
///
|
|
/// !TWI0
|
|
/// - PINS_TWI0
|
|
|
|
/// List of all DBGU pin definitions.
|
|
#define PINS_DBGU {(1<<14) | (1<<15), AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
/// LED #0 pin definition.
|
|
#define PIN_LED_0 {1 << 9, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/// LED #1 pin definition.
|
|
#define PIN_LED_1 {1 << 6, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/// List of all LED definitions.
|
|
#define PINS_LEDS PIN_LED_0, PIN_LED_1
|
|
/// Power LED index.
|
|
#define LED_POWER 0
|
|
/// DS1 LED index.
|
|
#define LED_DS1 1
|
|
|
|
/// Push button #1 pin definition.
|
|
#define PIN_PUSHBUTTON_1 {1 << 30, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_PULLUP}
|
|
/// Pusb button #2 pin definition.
|
|
#define PIN_PUSHBUTTON_2 {1UL << 31, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_INPUT, PIO_PULLUP}
|
|
/// List of all pushbutton pin definitions.
|
|
#define PINS_PUSHBUTTONS PIN_PUSHBUTTON_1, PIN_PUSHBUTTON_2
|
|
/// Push button #1 index.
|
|
#define PUSHBUTTON_BP1 0
|
|
/// Push button #2 index.
|
|
#define PUSHBUTTON_BP2 1
|
|
|
|
/// USART0 TXD pin definition.
|
|
#define PIN_USART0_TXD {1 << 4, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// USART0 RXD pin definition.
|
|
#define PIN_USART0_RXD {1 << 5, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// USART0 RTS pin definition.
|
|
#define PIN_USART0_RTS {1 << 26, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// USART0 CTS pin definition.
|
|
#define PIN_USART0_CTS {1 << 27, AT91C_BASE_PIOB, AT91C_ID_PIOB, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// USART0 SCK pin definition.
|
|
#define PIN_USART0_SCK {1UL << 31, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
/// SPI0 MISO pin definition.
|
|
#define PIN_SPI0_MISO {1 << 0, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_PULLUP}
|
|
/// SPI0 MOSI pin definition.
|
|
#define PIN_SPI0_MOSI {1 << 1, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// SPI0 SPCK pin definition.
|
|
#define PIN_SPI0_SPCK {1 << 2, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// List of SPI0 pin definitions (MISO, MOSI & SPCK).
|
|
#define PINS_SPI0 PIN_SPI0_MISO, PIN_SPI0_MOSI, PIN_SPI0_SPCK
|
|
/// SPI0 chip select 0 pin definition.
|
|
#define PIN_SPI0_NPCS0 {AT91C_PA3_SPI0_NPCS0, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
/// SPI0 chip select 1 pin definition.
|
|
#define PIN_SPI0_NPCS1 {AT91C_PC11_SPI0_NPCS1, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_PERIPH_B, PIO_DEFAULT}
|
|
|
|
/// SSC transmitter pins definition.
|
|
#define PINS_SSC_TX {0x00038000, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
/// USB VBus monitoring pin definition.
|
|
#define PIN_USB_VBUS {1 << 5, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_INPUT, PIO_DEFAULT}
|
|
|
|
/// List of MCI pins definitions.
|
|
#define PINS_MCI {0x0000003B, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}, \
|
|
{1 << 8, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
/// TWI0 pins definition.
|
|
#define PINS_TWI0 {0x01800000, AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT}
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - External components"
|
|
/// This page lists the definitions related to external on-board components
|
|
/// located in the board.h file for the AT91SAM9XE-EK.
|
|
///
|
|
/// !AT45 Dataflash Card (A)
|
|
/// - BOARD_AT45_A_SPI_BASE
|
|
/// - BOARD_AT45_A_SPI_ID
|
|
/// - BOARD_AT45_A_SPI_PINS
|
|
/// - BOARD_AT45_A_SPI
|
|
/// - BOARD_AT45_A_NPCS
|
|
/// - BOARD_AT45_A_NPCS_PIN
|
|
///
|
|
/// !AT45 Dataflash (B)
|
|
/// - BOARD_AT45_B_SPI_BASE
|
|
/// - BOARD_AT45_B_SPI_ID
|
|
/// - BOARD_AT45_B_SPI_PINS
|
|
/// - BOARD_AT45_B_SPI
|
|
/// - BOARD_AT45_B_NPCS
|
|
/// - BOARD_AT45_B_NPCS_PIN
|
|
///
|
|
/// !SD Card
|
|
/// - BOARD_SD_MCI_BASE
|
|
/// - BOARD_SD_MCI_ID
|
|
/// - BOARD_SD_PINS
|
|
/// - BOARD_SD_SLOT
|
|
///
|
|
///
|
|
/// !EMAC
|
|
/// - AT91C_BASE_EMAC
|
|
/// - BOARD_EMAC_POWER_ALWAYS_ON
|
|
/// - BOARD_EMAC_MODE_RMII
|
|
/// - BOARD_EMAC_PINS
|
|
/// - BOARD_EMAC_PIN_TEST
|
|
/// - BOARD_EMAC_PIN_RPTR
|
|
/// - BOARD_EMAC_RST_PINS
|
|
/// - BOARD_EMAC_RUN_PINS
|
|
|
|
|
|
/// Base address of SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_A_SPI_BASE AT91C_BASE_SPI0
|
|
/// Identifier of SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_A_SPI_ID AT91C_ID_SPI0
|
|
/// Pins of the SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_A_SPI_PINS PINS_SPI0
|
|
/// Dataflahs SPI number.
|
|
#define BOARD_AT45_A_SPI 0
|
|
/// Chip select connected to the dataflash.
|
|
#define BOARD_AT45_A_NPCS 0
|
|
/// Chip select pin connected to the dataflash.
|
|
#define BOARD_AT45_A_NPCS_PIN PIN_SPI0_NPCS0
|
|
|
|
/// Base address of SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_B_SPI_BASE AT91C_BASE_SPI0
|
|
/// Identifier of SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_B_SPI_ID AT91C_ID_SPI0
|
|
/// Pins of the SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT45_B_SPI_PINS PINS_SPI0
|
|
/// Dataflahs SPI number.
|
|
#define BOARD_AT45_B_SPI 0
|
|
/// Chip select connected to the dataflash.
|
|
#define BOARD_AT45_B_NPCS 1
|
|
/// Chip select pin connected to the dataflash.
|
|
#define BOARD_AT45_B_NPCS_PIN PIN_SPI0_NPCS1
|
|
|
|
/// Base address of SPI peripheral connected to the serialflash.
|
|
#define BOARD_AT26_A_SPI_BASE AT91C_BASE_SPI0
|
|
/// Identifier of SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT26_A_SPI_ID AT91C_ID_SPI0
|
|
/// Pins of the SPI peripheral connected to the dataflash.
|
|
#define BOARD_AT26_A_SPI_PINS PINS_SPI0
|
|
/// Dataflahs SPI number.
|
|
#define BOARD_AT26_A_SPI 0
|
|
/// Chip select connected to the dataflash.
|
|
#define BOARD_AT26_A_NPCS 0
|
|
/// Chip select pin connected to the dataflash.
|
|
#define BOARD_AT26_A_NPCS_PIN PIN_SPI0_NPCS0
|
|
|
|
/// Base address of the MCI peripheral connected to the SD card.
|
|
#define BOARD_SD_MCI_BASE AT91C_BASE_MCI
|
|
/// Peripheral identifier of the MCI connected to the SD card.
|
|
#define BOARD_SD_MCI_ID AT91C_ID_MCI
|
|
/// MCI pins that shall be configured to access the SD card.
|
|
#define BOARD_SD_PINS PINS_MCI
|
|
/// MCI slot to which the SD card is connected to.
|
|
#define BOARD_SD_SLOT MCI_SD_SLOTB
|
|
|
|
/// Board EMAC base address
|
|
#if !defined(AT91C_BASE_EMAC) && defined(AT91C_BASE_EMACB)
|
|
#define AT91C_BASE_EMAC AT91C_BASE_EMACB
|
|
#endif
|
|
/// Board EMAC power control - ALWAYS ON
|
|
#define BOARD_EMAC_POWER_ALWAYS_ON
|
|
/// Board EMAC work mode - RMII/MII ( 1 / 0 )
|
|
#define BOARD_EMAC_MODE_RMII 1
|
|
/// The PIN list of PIO for EMAC
|
|
#define BOARD_EMAC_PINS { ((1<<19)|(1<<13)|(1<<12)|(1<<16)|(1<<15)|(1<<14)\
|
|
|(1<<17)|(1<<18)|(1<<20)|(1<<21)|(1<<7)),\
|
|
AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT},\
|
|
{ ((1<<11)|(1<<10)|(1<<26)|(1<<25)|(1<<27)|(1<<22)\
|
|
|(1<<29)|(1<<28)),\
|
|
AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT}
|
|
/// The power up reset latch PIO for PHY
|
|
#define BOARD_EMAC_PIN_TEST {(1<<17), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
//#define BOARD_EMAC_PIN_RMII : connected to 3v3 (RMII)
|
|
// We force the address
|
|
// (1<<14) PHY address 0, (1<<15) PHY address 1 (PIO A, perih A)
|
|
// (1<<25) PHY address 2, (1<<26) PHY address 3 (PIO A, perih B)
|
|
#define BOARD_EMAC_PINS_PHYAD { ((1<<14)|(1<<15)),\
|
|
AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT},\
|
|
{ ((1<<25)|(1<<26)),\
|
|
AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
//#define BOARD_EMAC_PIN_10BT : not connected
|
|
#define BOARD_EMAC_PIN_RPTR {(1<<27), AT91C_BASE_PIOA, AT91C_ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT}
|
|
/// The PIN Configure list for EMAC on power up reset
|
|
#define BOARD_EMAC_RST_PINS BOARD_EMAC_PINS_PHYAD,\
|
|
BOARD_EMAC_PIN_TEST,\
|
|
BOARD_EMAC_PIN_RPTR
|
|
/// The runtime pin configure list for EMAC
|
|
#define BOARD_EMAC_RUN_PINS BOARD_EMAC_PINS
|
|
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
/// \page "SAM9XE-EK - Memories"
|
|
/// This page lists definitions related to external on-board memories.
|
|
///
|
|
/// !Embedded Flash
|
|
/// - BOARD_FLASH_EEFC
|
|
///
|
|
/// !SDRAM
|
|
/// - BOARD_SDRAM_SIZE
|
|
/// - PINS_SDRAM
|
|
///
|
|
/// !Nandflash
|
|
/// - PINS_NANDFLASH
|
|
/// - BOARD_NF_COMMAND_ADDR
|
|
/// - BOARD_NF_ADDRESS_ADDR
|
|
/// - BOARD_NF_DATA_ADDR
|
|
/// - BOARD_NF_CE_PIN
|
|
/// - BOARD_NF_RB_PIN
|
|
|
|
/// Indicates chip has an Enhanced EFC.
|
|
#define BOARD_FLASH_EEFC
|
|
/// Address of the IAP function in ROM.
|
|
#define BOARD_FLASH_IAP_ADDRESS 0x100008
|
|
|
|
/// Board SDRAM size
|
|
#define BOARD_SDRAM_SIZE 0x02000000
|
|
/// List of all SDRAM pins definitions.
|
|
#define PINS_SDRAM {0xFFFF0000, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_PERIPH_A, PIO_DEFAULT}
|
|
|
|
|
|
/// Nandflash controller peripheral pins definition.
|
|
#define PINS_NANDFLASH BOARD_NF_CE_PIN, BOARD_NF_RB_PIN
|
|
/// Nandflash chip enable pin definition.
|
|
#define BOARD_NF_CE_PIN {1 << 14, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_OUTPUT_1, PIO_DEFAULT}
|
|
/// Nandflash ready/busy pin definition.
|
|
#define BOARD_NF_RB_PIN {1 << 13, AT91C_BASE_PIOC, AT91C_ID_PIOC, PIO_INPUT, PIO_PULLUP}
|
|
/// Address for transferring command bytes to the nandflash.
|
|
#define BOARD_NF_COMMAND_ADDR 0x40400000
|
|
/// Address for transferring address bytes to the nandflash.
|
|
#define BOARD_NF_ADDRESS_ADDR 0x40200000
|
|
/// Address for transferring data bytes to the nandflash.
|
|
#define BOARD_NF_DATA_ADDR 0x40000000
|
|
|
|
/// Address for transferring command bytes to the norflash.
|
|
#define BOARD_NORFLASH_ADDR 0x10000000
|
|
//------------------------------------------------------------------------------
|
|
|
|
#endif //#ifndef BOARD_H
|
|
|