1225 lines
54 KiB
Plaintext
1225 lines
54 KiB
Plaintext
|
#!/bin/bash
|
||
|
|
#
|
||
|
|
# armbianmonitor
|
||
|
|
#
|
||
|
|
# This script serves different purposes based on how it is called:
|
||
|
|
#
|
||
|
|
# - toggle boot verbosity (works)
|
||
|
|
# - monitoring mode: continually print monitoring info (WiP)
|
||
|
|
# - uploading /var/log/armbian-hardware-monitor.log to online pastebin service
|
||
|
|
#
|
||
|
|
# Without arguments called it should present a simple user
|
||
|
|
# interface that guides through:
|
||
|
|
#
|
||
|
|
# - installation of RPi-Monitor if not already installed by user
|
||
|
|
# - active basic or more verbose monitoring mode
|
||
|
|
# - provides monitoring parameters for connected disks
|
||
|
|
#
|
||
|
|
# The second part is WiP and all the user interaction part
|
||
|
|
# still completely missing.
|
||
|
|
#
|
||
|
|
# This script is used to configure armbianmonitor behaviour.
|
||
|
|
# It will ask the user whether to activate monitoring or not,
|
||
|
|
# whether to enable debug monitoring and also how to deal with
|
||
|
|
# connected disks. In fact it walks through the list of available
|
||
|
|
# disks, checks them, tries to patch hddtemp.db if necessary
|
||
|
|
# and provides a proposal for /etc/armbianmonitor/disks.conf
|
||
|
|
# when a new disk is found.
|
||
|
|
#
|
||
|
|
# In case monitoring should be activated the following file
|
||
|
|
# will be created: /etc/armbianmonitor/start-monitoring. If
|
||
|
|
# debug output has been chosen, then DEBUG will be written to
|
||
|
|
# the file.
|
||
|
|
#
|
||
|
|
# The script will install smartmontools/gdisk if not already
|
||
|
|
# installed and patches smartmontools' update-smart-drivedb
|
||
|
|
# script if necessary. For disks the 'device model' will be
|
||
|
|
# shown but internally we rely always on the GUID. This is the
|
||
|
|
# key for entry in /etc/armbianmonitor/disks.conf
|
||
|
|
#
|
||
|
|
# When the script exits and the user activated monitoring it
|
||
|
|
# recommends doing a restart since on the next reboot the
|
||
|
|
# setup-armbian-monitoring-environment script will configure
|
||
|
|
# monitoring sources and decides based on the existence and
|
||
|
|
# contents of /etc/armbianmonitor/start-monitoring whether
|
||
|
|
# rpimonitord should be started or not.
|
||
|
|
#
|
||
|
|
# The format of /etc/armbianmonitor/disks.conf is as follows:
|
||
|
|
#
|
||
|
|
# ${GUID}:${Name}:${smartctl prefix}:${temp call}:${CRC}:${LCC}
|
||
|
|
#
|
||
|
|
# Two examples:
|
||
|
|
#
|
||
|
|
# A57BF307-7D82-4783-BD1D-B346CA8C195B:WD Green::199:193 # WD HDD on SATA
|
||
|
|
# F8D372DC-63DB-494B-B802-87DC47FAD4E1:Samsung EVO:sat::199: # SSD in USB enclosure
|
||
|
|
#
|
||
|
|
# - GUID is the GUID as determined by gdisk
|
||
|
|
# - 'Name': The name as it will later be shown in RPi-Monitor, defaults to
|
||
|
|
# the 'device model' read out through smartctl but can be changed to
|
||
|
|
# be more significant (beware that this string must contain colons!)
|
||
|
|
# - "smartctl prefix" can be empty or should be the the necessary prefix for
|
||
|
|
# USB disks, eg. '-d sat' or '-d usbjmicron' and so on -- please have a
|
||
|
|
# look at https://www.smartmontools.org/wiki/Supported_USB-Devices
|
||
|
|
# - "temp call" when being omitted indicates that hddtemp should be used.
|
||
|
|
# Otherwise it should contain the complete command line ('DISK' will be
|
||
|
|
# dynamically replaced by the device node when the actual monitoring
|
||
|
|
# happens), for example:
|
||
|
|
# /sbin/hdparm -C DISK | grep -Eq "standby|sleeping" || \
|
||
|
|
# /usr/sbin/smartctl -d sat -a DISK | awk -F" " '/Temperature_Cel/ {printf $10}'
|
||
|
|
# - 'CRC attribute': The decimal value of the S.M.A.R.T. attribute that
|
||
|
|
# is used to store the count of checksum errors between disk and host
|
||
|
|
# controller (might be omitted if the drive doesn't support it)
|
||
|
|
# - 'LCC attribute': The decimal value of the S.M.A.R.T. attribute that
|
||
|
|
# should contain the load cycle counter value (might be omitted
|
||
|
|
# if the drive doesn't support it)
|
||
|
|
#
|
||
|
|
# TODO:
|
||
|
|
#
|
||
|
|
# - develop main functionality ;) asking the user regarding monitoring
|
||
|
|
# - deal with 'SMART overall-health self-assessment test result:'
|
||
|
|
# - write documentation
|
||
|
|
#
|
||
|
|
############################################################################
|
||
|
|
|
||
|
|
Main() {
|
||
|
|
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
|
||
|
|
|
||
|
|
# check if stdout is a terminal...
|
||
|
|
if test -t 1; then
|
||
|
|
# see if it supports colors...
|
||
|
|
ncolors=$(tput colors)
|
||
|
|
if test -n "$ncolors" && test $ncolors -ge 8; then
|
||
|
|
BOLD="$(tput bold)"
|
||
|
|
NC='\033[0m' # No Color
|
||
|
|
LGREEN='\033[1;32m'
|
||
|
|
LRED='\e[0;91m'
|
||
|
|
fi
|
||
|
|
fi
|
||
|
|
|
||
|
|
[ $# -eq 0 ] && (DisplayUsage ; exit 0)
|
||
|
|
|
||
|
|
ParseOptions "$@"
|
||
|
|
|
||
|
|
exit 0
|
||
|
|
PreRequisits
|
||
|
|
|
||
|
|
# check whether user runs rpimonitord on his own or we activated it
|
||
|
|
if [ -f /etc/armbianmonitor/start-monitoring ]; then
|
||
|
|
# we should already provide monitoring, check whether DEBUG
|
||
|
|
# is also set
|
||
|
|
ArmbianMonitoring=TRUE
|
||
|
|
read -r DebugMode </etc/armbianmonitor/start-monitoring 2>/dev/null
|
||
|
|
fi
|
||
|
|
|
||
|
|
# check whether rpimonitord is running and compare with ${ArmbianMonitoring}
|
||
|
|
# In case the user chose to run rpimonitord on his own, we skip the config
|
||
|
|
# part and only output disk info
|
||
|
|
:
|
||
|
|
|
||
|
|
# check available disk devices
|
||
|
|
CheckDisks
|
||
|
|
} # Main
|
||
|
|
|
||
|
|
ParseOptions() {
|
||
|
|
while getopts 'hHbBuUrRmMsnNd:Dc:C:pPvz' c ; do
|
||
|
|
case ${c} in
|
||
|
|
H)
|
||
|
|
# display full help test
|
||
|
|
# export FullUsage=TRUE
|
||
|
|
DisplayUsage
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
h)
|
||
|
|
# display short help
|
||
|
|
DisplayUsage
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
m|M|s)
|
||
|
|
# monitoring mode, -s is for internal usage (debug log upload)
|
||
|
|
interval=$2
|
||
|
|
MonitorMode ${OPTARG}
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
n|N)
|
||
|
|
# network monitoring mode
|
||
|
|
rf1=$2
|
||
|
|
NetworkMonitorMode ${OPTARG}
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
u)
|
||
|
|
# Upload /var/log/armbian-hardware-monitor.log with additional support info
|
||
|
|
which curl >/dev/null 2>&1 || apt-get -f -qq -y install curl
|
||
|
|
echo -e "System diagnosis information will now be uploaded to \c"
|
||
|
|
fping paste.armbian.com 2>/dev/null | grep -q alive
|
||
|
|
if [ $? != 0 ]; then
|
||
|
|
echo -e "\nNetwork/firewall problem detected.\nTrying fallback..." >&2
|
||
|
|
fping ix.io 2>/dev/null | grep -q alive
|
||
|
|
if [ $? != 0 ]; then
|
||
|
|
echo -e "\nNetwork/firewall problem detected. Not able to upload debug info.\nPlease fix this or use \"-U\" instead and upload ${BOLD}whole output${NC} manually to an online pasteboard service\nand provide the URL in the forum where you have been asked for this.\n"
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
# we obfuscate IPv4 addresses somehow but not too much, MAC addresses have to remain
|
||
|
|
# in clear since otherwise the log becomes worthless due to randomly generated
|
||
|
|
# addresses here and there that might conflict
|
||
|
|
CollectSupportInfo \
|
||
|
|
| sed -E 's/([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3})/XXX.XXX.\3\4/g' \
|
||
|
|
| curl -F 'f:1=<-' ix.io
|
||
|
|
echo -e "Please post the URL in the forum where you've been asked for.\n"
|
||
|
|
exit 0
|
||
|
|
fi
|
||
|
|
|
||
|
|
# we obfuscate IPv4 addresses somehow but not too much, MAC addresses have to remain
|
||
|
|
# in clear since otherwise the log becomes worthless due to randomly generated
|
||
|
|
# addresses here and there that might conflict
|
||
|
|
CollectSupportInfo \
|
||
|
|
| sed -E 's/([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3})/XXX.XXX.\3\4/g' \
|
||
|
|
| curl -s --data-binary @- "https://paste.armbian.com/documents" \
|
||
|
|
| awk -F'"' '{ print "https://paste.armbian.com/" $4 }'
|
||
|
|
echo -e "Please post the URL in the forum where you've been asked for.\n"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
|
||
|
|
U)
|
||
|
|
# Send support info to stdout to be uploaded manually. Add line numbers to prevent
|
||
|
|
# users being creative and supressing everything that's important
|
||
|
|
CollectSupportInfo \
|
||
|
|
| sed -E 's/([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3}\.)([0-9]{1,3})/XXX.XXX.\3\4/g' \
|
||
|
|
| awk '!NF{$0=" "}1' | nl -
|
||
|
|
echo -e "\nPlease upload the ${BOLD}whole output${NC} above to an online pasteboard service\nand provide the URL in the forum where you have been asked for this.\n"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
r|R)
|
||
|
|
# Installs RPi-Monitor and patches templates (heavily on sun8i)
|
||
|
|
fping armbian.com 2>/dev/null | grep -q alive || \
|
||
|
|
(echo "Network/firewall problem detected. Please fix this prior to installing RPi-Monitor." >&2 ; exit 1)
|
||
|
|
InstallRPiMonitor
|
||
|
|
case $(awk '/Hardware/ {print $3$4}' </proc/cpuinfo) in
|
||
|
|
*sun8i*)
|
||
|
|
PatchRPiMonitor_for_sun8i
|
||
|
|
case $(uname -r) in
|
||
|
|
3.4.*)
|
||
|
|
sed -i 's|H3_Extended_Mainline.conf|H3_Extended.conf|' /etc/rpimonitor/template/OrangePi_H3.conf
|
||
|
|
systemctl restart rpimonitor >/dev/null 2>&1
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
;;
|
||
|
|
*)
|
||
|
|
# On other SoCs than H3 make minor adjustments to config to reflect Armbian reality:
|
||
|
|
. /etc/armbian-release
|
||
|
|
sed -e "s/^web.status.1.name=.*/web.status.1.name=$BOARD_NAME/" \
|
||
|
|
-e "s/^web.statistics.1.name=.*/web.statistics.1.name=$BOARD_NAME/" \
|
||
|
|
</etc/rpimonitor/template/raspbian.conf >/etc/rpimonitor/template/armbian.conf
|
||
|
|
cd /etc/rpimonitor/
|
||
|
|
ln -sf /etc/rpimonitor/template/armbian.conf data.conf
|
||
|
|
# fix temperature everywhere
|
||
|
|
sed -i -e 's|^dynamic.12.source=.*|dynamic.12.source=/etc/armbianmonitor/datasources/soctemp|' \
|
||
|
|
-e 's|^dynamic.12.postprocess=.*|dynamic.12.postprocess=sprintf("%.1f", $1/1000)|' \
|
||
|
|
/etc/rpimonitor/template/temperature.conf
|
||
|
|
# monitor big cores on big.LITTLE
|
||
|
|
if [ $(grep -c '^processor' /proc/cpuinfo) -ge 4 ]; then
|
||
|
|
sed -i 's|/sys/devices/system/cpu/cpu0/cpufreq/|/sys/devices/system/cpu/cpu4/cpufreq/|g' \
|
||
|
|
/etc/rpimonitor/template/cpu.conf
|
||
|
|
fi
|
||
|
|
# display processor architecture instead of undefined
|
||
|
|
sed -i -e "s_^static.4.source=.*_static.4.source=lscpu | awk -F' ' '/^Architecture/ {print \$2}'_" \
|
||
|
|
-e "s/^static.4.regexp=.*/static.4.regexp=/" /etc/rpimonitor/template/version.conf
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
echo -e "\nNow you're able to enjoy RPi-Monitor at http://$(ip a | awk -F" " '/inet / {print $2}' | grep -v '127.0.0.1' | cut -f1 -d/ | head -n1):8888"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
p|P)
|
||
|
|
# Installs cpuminer on 32-bit platforms
|
||
|
|
fping armbian.com 2>/dev/null | grep -q alive || \
|
||
|
|
(echo "Network/firewall problem detected. Please fix this prior to installing cpuminer." >&2 ; exit 1)
|
||
|
|
cd /usr/local/src/
|
||
|
|
wget http://downloads.sourceforge.net/project/cpuminer/pooler-cpuminer-2.5.1.tar.gz
|
||
|
|
tar xf pooler-cpuminer-2.5.1.tar.gz && rm pooler-cpuminer-2.5.1.tar.gz
|
||
|
|
cd cpuminer-2.5.1/
|
||
|
|
apt-get -f -qq -y install libcurl4-gnutls-dev
|
||
|
|
autoreconf --force --install --verbose
|
||
|
|
./configure CFLAGS="-O3"
|
||
|
|
make && make install
|
||
|
|
echo -e "\n\nNow you can use /usr/local/bin/minerd to do automated benchmarking.\nIn case you also installed RPi-Monitor you can do a"
|
||
|
|
echo -e "\n touch /root/.cpuminer\n\nto ensure minerd is running after reboot and results are recorded\nwith RPi-Monitor"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
d)
|
||
|
|
# monitors write activity to disk
|
||
|
|
MonitorIO "${OPTARG}"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
D)
|
||
|
|
fping ix.io 2>/dev/null | grep -q alive || \
|
||
|
|
(echo "Network/firewall problem detected. Please fix this prior to installing RPi-Monitor." >&2 ; exit 1)
|
||
|
|
DebugOutput="$(mktemp /tmp/${0##*/}.XXXXXX)"
|
||
|
|
trap "rm \"${DebugOutput}\" ; exit 0" 0 1 2 3 15
|
||
|
|
set -x
|
||
|
|
exec 2>"${DebugOutput}"
|
||
|
|
PreRequisits >/dev/null 2>&1
|
||
|
|
CheckDisks
|
||
|
|
which curl >/dev/null 2>&1 || apt-get -f -qq -y install curl
|
||
|
|
echo -e "\nDebug output has been collected at the following URL: \c"
|
||
|
|
(cat "${DebugOutput}"; echo -e "\n\n\ngdisk.txt contents:\n" ; cat "${MyTempDir}/gdisk.txt" ;\
|
||
|
|
echo -e "\n\n\nsmartctl.txt contents:\n" ; cat "${MyTempDir}/smartctl.txt") \
|
||
|
|
| curl -F 'f:1=<-' ix.io
|
||
|
|
echo -e "Please post the URL in the Armbian forum where you've been asked for."
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
c|C)
|
||
|
|
# check card mode
|
||
|
|
CheckCard "${OPTARG}"
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
v)
|
||
|
|
# Verify installation integrity
|
||
|
|
VerifyRepairExcludes="/etc/|/boot/|cache|getty|/var/lib/smartmontools/"
|
||
|
|
VerifyInstallation
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
z)
|
||
|
|
# Do a quick 7-zip benchmark to estimate CPU performance
|
||
|
|
runs=$2
|
||
|
|
Run7ZipBenchmark 2>/dev/null
|
||
|
|
exit 0
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
done
|
||
|
|
} # ParseOptions
|
||
|
|
|
||
|
|
DisplayUsage() {
|
||
|
|
|
||
|
|
# Kept for referance.
|
||
|
|
# if [ ${FullUsage} ]; then
|
||
|
|
# echo -e "\nDetailed Description:"
|
||
|
|
# grep "^#" "$0" | grep -v "^#\!/bin/bash" | sed 's/^#//'
|
||
|
|
# fi
|
||
|
|
echo
|
||
|
|
echo "Usage: $(basename $0) [-h] [-b] [-c \$path] [-d \$device] [-D] [-m] [-p] [-r] [-u]"
|
||
|
|
echo
|
||
|
|
echo "Options:"
|
||
|
|
echo " -c /path/to/test Performs disk health/performance tests"
|
||
|
|
echo " -d Monitors writes to \$device"
|
||
|
|
echo " -D Tries to upload debug disk info to improve armbianmonitor"
|
||
|
|
echo " -m Provides simple CLI monitoring - scrolling output"
|
||
|
|
echo " -M Provides simple CLI monitoring - fixed-line output"
|
||
|
|
echo " -n Provides simple CLI network monitoring - scrolling output"
|
||
|
|
echo " -N Provides simple CLI network monitoring - fixed-line output"
|
||
|
|
echo " -p Tries to install cpuminer for performance measurements"
|
||
|
|
echo " -r Tries to install RPi-Monitor"
|
||
|
|
echo " -u Tries to upload armbian-hardware-monitor.log for support purposes"
|
||
|
|
echo " -v Tries to verify installed package integrity"
|
||
|
|
echo " -z Runs a quick 7-zip benchmark to estimate CPU performance"
|
||
|
|
echo
|
||
|
|
|
||
|
|
} # DisplayUsage
|
||
|
|
|
||
|
|
MonitorMode() {
|
||
|
|
# $1 is the time in seconds to pause between two prints, defaults to 5 seconds
|
||
|
|
# This functions prints out endlessly:
|
||
|
|
# - time/date
|
||
|
|
# - average 1m load
|
||
|
|
# - detailed CPU statistics
|
||
|
|
# - Soc temperature if available
|
||
|
|
# - PMIC temperature if available
|
||
|
|
# - DC-IN voltage if available
|
||
|
|
|
||
|
|
# Allow armbianmonitor to return back to armbian-config
|
||
|
|
trap "echo ; exit 0" 0 1 2 3 15
|
||
|
|
|
||
|
|
# Try to renice to 19 to not interfere with OS behaviour
|
||
|
|
renice 19 $BASHPID >/dev/null 2>&1
|
||
|
|
|
||
|
|
LastUserStat=0
|
||
|
|
LastNiceStat=0
|
||
|
|
LastSystemStat=0
|
||
|
|
LastIdleStat=0
|
||
|
|
LastIOWaitStat=0
|
||
|
|
LastIrqStat=0
|
||
|
|
LastSoftIrqStat=0
|
||
|
|
LastCpuStatCheck=0
|
||
|
|
LastTotal=0
|
||
|
|
|
||
|
|
SleepInterval=${interval:-5}
|
||
|
|
|
||
|
|
Sensors="/etc/armbianmonitor/datasources/"
|
||
|
|
if [ -f /sys/devices/system/cpu/cpu4/cpufreq/scaling_cur_freq ]; then
|
||
|
|
DisplayHeader="Time CPU_cl0/CPU_cl1 load %cpu %sys %usr %nice %io %irq"
|
||
|
|
CPUs=dual_cluster
|
||
|
|
echo "Two CPU clusters are available for monitoring"
|
||
|
|
elif [ -f /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq ]; then
|
||
|
|
DisplayHeader="Time CPU load %cpu %sys %usr %nice %io %irq"
|
||
|
|
CPUs=normal
|
||
|
|
else
|
||
|
|
DisplayHeader="Time CPU n/a load %cpu %sys %usr %nice %io %irq"
|
||
|
|
CPUs=notavailable
|
||
|
|
fi
|
||
|
|
|
||
|
|
[ -f "${Sensors}/soctemp" ] && DisplayHeader="${DisplayHeader} Tcpu" || SocTemp='n/a'
|
||
|
|
[ -f "${Sensors}/pmictemp" ] && DisplayHeader="${DisplayHeader} PMIC" || PMICTemp='n/a'
|
||
|
|
DCIN=$(CheckDCINVoltage)
|
||
|
|
[ -f "${DCIN}" ] && DisplayHeader="${DisplayHeader} DC-IN" || DCIN='n/a'
|
||
|
|
[ -f /sys/devices/virtual/thermal/cooling_device0/cur_state ] \
|
||
|
|
&& DisplayHeader="${DisplayHeader} C.St." || CoolingState='n/a'
|
||
|
|
echo -e "Stop monitoring using [ctrl]-[c]"
|
||
|
|
[ $(echo "${SleepInterval} * 10" | bc | cut -d. -f1) -le 15 ] \
|
||
|
|
&& echo "Warning: High update frequency (${SleepInterval} sec) might change system behaviour!"
|
||
|
|
echo -e "${DisplayHeader}"
|
||
|
|
Counter=0
|
||
|
|
while true ; do
|
||
|
|
if [ "$c" == "m" ]; then
|
||
|
|
let Counter++
|
||
|
|
if [ ${Counter} -eq 15 ]; then
|
||
|
|
printf "\n\n%s" "$DisplayHeader"
|
||
|
|
Counter=0
|
||
|
|
fi
|
||
|
|
elif [ "$c" == "s" ]; then
|
||
|
|
# internal mode for debug log upload
|
||
|
|
let Counter++
|
||
|
|
if [ ${Counter} -eq 6 ]; then
|
||
|
|
exit 0
|
||
|
|
fi
|
||
|
|
else
|
||
|
|
printf "\x1b[1A"
|
||
|
|
fi
|
||
|
|
LoadAvg=$(cut -f1 -d" " </proc/loadavg)
|
||
|
|
case ${CPUs} in
|
||
|
|
dual_cluster)
|
||
|
|
Cluster1=$(awk '{printf ("%0.0f",$1/1000); }' </sys/devices/system/cpu/cpu4/cpufreq/scaling_cur_freq) 2>/dev/null
|
||
|
|
Cluster0=$(awk '{printf ("%0.0f",$1/1000); }' </sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq) 2>/dev/null
|
||
|
|
ProcessStats
|
||
|
|
printf "\n%s %4s/%4s MHz %5s %s" "$(date "+%H:%M:%S")" "$Cluster0" "$Cluster1" "$LoadAvg" "$procStats"
|
||
|
|
;;
|
||
|
|
normal)
|
||
|
|
CpuFreq=$(awk '{printf ("%0.0f",$1/1000); }' </sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq) 2>/dev/null
|
||
|
|
ProcessStats
|
||
|
|
printf "\n%s %4s MHz %5s %s" "$(date "+%H:%M:%S")" "$CpuFreq" "$LoadAvg" "$procStats"
|
||
|
|
;;
|
||
|
|
notavailable)
|
||
|
|
ProcessStats
|
||
|
|
printf "\n%s --- %5s %s" "$(date "+%H:%M:%S")" "$LoadAvg" "$procStats"
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
if [ "X${SocTemp}" != "Xn/a" ]; then
|
||
|
|
read -r SocTemp <"${Sensors}/soctemp"
|
||
|
|
if [ ${SocTemp} -ge 1000 ]; then
|
||
|
|
SocTemp=$(awk '{printf ("%0.1f",$1/1000); }' <<<${SocTemp})
|
||
|
|
fi
|
||
|
|
printf " %4s °C" "$SocTemp"
|
||
|
|
fi
|
||
|
|
if [ "X${PMICTemp}" != "Xn/a" ]; then
|
||
|
|
read -r PMICTemp <"${Sensors}/pmictemp"
|
||
|
|
if [ ${PMICTemp} -ge 1000 ]; then
|
||
|
|
PMICTemp=$(awk '{printf ("%0.1f",$1/1000); }' <<<${PMICTemp})
|
||
|
|
fi
|
||
|
|
printf " %4s °C" "$PMICTemp"
|
||
|
|
fi
|
||
|
|
if [ "X${DCIN}" != "Xn/a" ]; then
|
||
|
|
case "${DCIN##*/}" in
|
||
|
|
in_voltage2_raw)
|
||
|
|
# Tinkerboard S
|
||
|
|
read -r RAWvoltage <"${DCIN}"
|
||
|
|
DCINvoltage=$(echo "(${RAWvoltage} / ((82.0/302.0) * 1023.0 / 1.8)) + 0.1" | bc -l)
|
||
|
|
;;
|
||
|
|
*)
|
||
|
|
DCINvoltage=$(awk '{printf ("%0.2f",$1/1000000); }' <"${DCIN}")
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
printf " %5sV" "$DCINvoltage"
|
||
|
|
fi
|
||
|
|
[ "X${CoolingState}" != "Xn/a" ] && \
|
||
|
|
printf " %d/%d" "$(cat /sys/devices/virtual/thermal/cooling_device0/cur_state)" "$(cat /sys/devices/virtual/thermal/cooling_device0/max_state)"
|
||
|
|
[ "$c" == "s" ] && sleep 0.3 || sleep ${SleepInterval}
|
||
|
|
done
|
||
|
|
} # MonitorMode
|
||
|
|
|
||
|
|
CheckDCINVoltage() {
|
||
|
|
for i in /sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/power_supply/usb/voltage_now \
|
||
|
|
/sys/power/axp_pmu/vbus/voltage \
|
||
|
|
/sys/devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/power_supply/ac/voltage_now \
|
||
|
|
/sys/power/axp_pmu/ac/voltage '/sys/bus/iio/devices/iio:device0/in_voltage2_raw' ; do
|
||
|
|
if [ -f $i ]; then
|
||
|
|
read -r DCINvoltage <$i 2>/dev/null
|
||
|
|
if [ ${DCINvoltage} -gt 4080000 ]; then
|
||
|
|
echo $i
|
||
|
|
break
|
||
|
|
fi
|
||
|
|
fi
|
||
|
|
done
|
||
|
|
} # CheckDCINVoltage
|
||
|
|
|
||
|
|
ProcessStats() {
|
||
|
|
if [ -f /tmp/cpustat ]; then
|
||
|
|
# RPi-Monitor/Armbianmonitor already running and providing processed values
|
||
|
|
set $(awk -F" " '{print $1"\t"$2"\t"$3"\t"$4"\t"$5"\t"$6}' </tmp/cpustat)
|
||
|
|
CPULoad=$1
|
||
|
|
SystemLoad=$2
|
||
|
|
UserLoad=$3
|
||
|
|
NiceLoad=$4
|
||
|
|
IOWaitLoad=$5
|
||
|
|
IrqCombinedLoad=$6
|
||
|
|
else
|
||
|
|
procStatLine=(`sed -n 's/^cpu\s//p' /proc/stat`)
|
||
|
|
UserStat=${procStatLine[0]}
|
||
|
|
NiceStat=${procStatLine[1]}
|
||
|
|
SystemStat=${procStatLine[2]}
|
||
|
|
IdleStat=${procStatLine[3]}
|
||
|
|
IOWaitStat=${procStatLine[4]}
|
||
|
|
IrqStat=${procStatLine[5]}
|
||
|
|
SoftIrqStat=${procStatLine[6]}
|
||
|
|
|
||
|
|
Total=0
|
||
|
|
for eachstat in "${procStatLine[@]}"; do
|
||
|
|
Total=$(( Total + eachstat ))
|
||
|
|
done
|
||
|
|
|
||
|
|
UserDiff=$(( UserStat - LastUserStat ))
|
||
|
|
NiceDiff=$(( NiceStat - LastNiceStat ))
|
||
|
|
SystemDiff=$(( SystemStat - LastSystemStat ))
|
||
|
|
IOWaitDiff=$(( IOWaitStat - LastIOWaitStat ))
|
||
|
|
IrqDiff=$(( IrqStat - LastIrqStat ))
|
||
|
|
SoftIrqDiff=$(( SoftIrqStat - LastSoftIrqStat ))
|
||
|
|
|
||
|
|
diffIdle=$(( IdleStat - LastIdleStat ))
|
||
|
|
diffTotal=$(( Total - LastTotal ))
|
||
|
|
diffX=$(( diffTotal - diffIdle ))
|
||
|
|
CPULoad=$(( diffX * 100 / diffTotal ))
|
||
|
|
UserLoad=$(( UserDiff * 100 / diffTotal ))
|
||
|
|
SystemLoad=$(( SystemDiff * 100 / diffTotal ))
|
||
|
|
NiceLoad=$(( NiceDiff * 100 / diffTotal ))
|
||
|
|
IOWaitLoad=$(( IOWaitDiff * 100 / diffTotal ))
|
||
|
|
IrqCombined=$(( IrqDiff + SoftIrqDiff ))
|
||
|
|
IrqCombinedLoad=$(( IrqCombined * 100 / diffTotal ))
|
||
|
|
|
||
|
|
LastUserStat=${UserStat}
|
||
|
|
LastNiceStat=${NiceStat}
|
||
|
|
LastSystemStat=${SystemStat}
|
||
|
|
LastIdleStat=${IdleStat}
|
||
|
|
LastIOWaitStat=${IOWaitStat}
|
||
|
|
LastIrqStat=${IrqStat}
|
||
|
|
LastSoftIrqStat=${SoftIrqStat}
|
||
|
|
LastTotal=${Total}
|
||
|
|
fi
|
||
|
|
procStats=$(printf "%3s%%%4s%%%4s%%%4s%%%4s%%%4s%%\n" "$CPULoad" "$SystemLoad" "$UserLoad" "$NiceLoad" "$IOWaitLoad" "$IrqCombinedLoad")
|
||
|
|
} # ProcessStats
|
||
|
|
|
||
|
|
MonitorIO() {
|
||
|
|
LastPagesOut=$(awk '/pgpgout/ {print $2}' </proc/vmstat)
|
||
|
|
if grep -q "$1" /proc/diskstats; then
|
||
|
|
LastWrite=$(awk -v d="$1" '{if($3 == d) print $8}' </proc/diskstats)
|
||
|
|
else
|
||
|
|
echo "Bud argument: [$1]"
|
||
|
|
echo "Disks valid for monitoring: $(
|
||
|
|
awk '{if($8 != 0) printf "%s ", $3}' /proc/diskstats
|
||
|
|
)"
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
LastTimeChecked=$(date "+%s")
|
||
|
|
while true ; do
|
||
|
|
CurrentWrite=$(awk -v d="$1" '{if($3 == d) print $8}' </proc/diskstats)
|
||
|
|
if [ ${CurrentWrite} -gt ${LastWrite} ]; then
|
||
|
|
PagesOut=$(awk '/pgpgout/ {print $2}' </proc/vmstat)
|
||
|
|
TimeNow=$(date "+%s")
|
||
|
|
PagesWritten=$((CurrentWrite - LastWrite))
|
||
|
|
PageOuts=$((PagesOut - LastPagesOut))
|
||
|
|
echo -e "$(LANG=C date)$(printf "%8s" ${PagesWritten})/${PageOuts} pages written after $((TimeNow - LastTimeChecked)) sec"
|
||
|
|
LastTimeChecked=${TimeNow}
|
||
|
|
LastPagesOut=${PagesOut}
|
||
|
|
LastWrite=${CurrentWrite}
|
||
|
|
fi
|
||
|
|
sleep 1
|
||
|
|
done
|
||
|
|
} # MonitorIO
|
||
|
|
|
||
|
|
CheckDisks() {
|
||
|
|
# This function walks through all block devices whose name starts with sd* and
|
||
|
|
# then gets the name hddtemp expects, the model name from smartctl, looks whether
|
||
|
|
# the drive only lists one temperature value and patches hddtemp.db if necessary
|
||
|
|
# and also tries to get CRC and LCC S.M.A.R.T. attributes to provide the user
|
||
|
|
# with the necessary config file contents for /etc/armbianmonitor/disks.conf:
|
||
|
|
|
||
|
|
ls /sys/block/sd* >/dev/null 2>&1 || exit 0
|
||
|
|
|
||
|
|
for i in /sys/block/sd* ; do
|
||
|
|
DeviceNode=/dev/${i##*/}
|
||
|
|
# get GUID/UUID for disk and check whether a partition table is existent. If
|
||
|
|
# not GUID will always be random
|
||
|
|
gdisk -l ${DeviceNode} >"${MyTempDir}/gdisk.txt"
|
||
|
|
GUID=$(awk -F" " '/^Disk identifier/ {print $4}' <"${MyTempDir}/gdisk.txt")
|
||
|
|
CountOfUnavailablePartitionTables=$(grep ': not present' "${MyTempDir}/gdisk.txt" | wc -l)
|
||
|
|
if [ ${CountOfUnavailablePartitionTables} -eq 4 ]; then
|
||
|
|
echo -e "\nSkipping ${DeviceNode} due to missing partition table. Use parted to create one."
|
||
|
|
break
|
||
|
|
else
|
||
|
|
printf "\nExamining %s with GUID %s" "$DeviceNode" "$GUID"
|
||
|
|
fi
|
||
|
|
|
||
|
|
# get name hddtemp needs
|
||
|
|
HddtempName="$(hddtemp --debug ${DeviceNode} | awk -F": " '/^Model: / {print $2}' | \
|
||
|
|
cut -c-40 | sed 's/^[ \t]*//;s/[ \t]*$//')"
|
||
|
|
# store smartctl output in temporary file
|
||
|
|
smartctl -q noserial -s on -a ${DeviceNode} >"${MyTempDir}/smartctl.txt" 2>&1
|
||
|
|
DeviceModel="$(awk -F": " '/^Device Model/ {print $2}' <"${MyTempDir}/smartctl.txt" | \
|
||
|
|
sed 's/^[ \t]*//;s/[ \t]*$//')"
|
||
|
|
if [ "X${DeviceModel}" = "X" ]; then
|
||
|
|
# Reading S.M.A.R.T. failed, we try autodetect mode iterating through all
|
||
|
|
# known smartctl modes (-d auto|sat|usbcypress|usbjmicron|usbprolific|usbsunplus)
|
||
|
|
SMARTPrefix="$(CheckSMARTModes ${DeviceNode} 2>/dev/null)"
|
||
|
|
if [ "X${SMARTPrefix}" = "X" ]; then
|
||
|
|
# we can't query the disk. Time to give up
|
||
|
|
echo -e "\nUnable to query the disk through S.M.A.R.T.\nPlease investigate manually using smartctl\n"
|
||
|
|
break
|
||
|
|
fi
|
||
|
|
fi
|
||
|
|
|
||
|
|
# user feedback
|
||
|
|
if [ "X${SMARTPrefix}" = "X" ]; then
|
||
|
|
echo -e " \n(accessible through S.M.A.R.T.)"
|
||
|
|
else
|
||
|
|
echo -e " \n(can be queried with \"-d ${SMARTPrefix}\" through S.M.A.R.T.)"
|
||
|
|
fi
|
||
|
|
|
||
|
|
# check for CRC and LCC attributes
|
||
|
|
CRCAttribute=$(awk -F" " '/CRC_Error_Count/ {print $1}' <"${MyTempDir}/smartctl.txt")
|
||
|
|
LCCAttribute=$(grep -i "load.cycle" "${MyTempDir}/smartctl.txt" | awk -F" " '{print $1}')
|
||
|
|
|
||
|
|
# check whether /etc/hddtemp.db should be patched
|
||
|
|
grep -q "${HddtempName}" /etc/hddtemp.db
|
||
|
|
if [ $? -ne 0 ]; then
|
||
|
|
# No entry into hddtemp database, we've a look whether there's a 'temperature'
|
||
|
|
# attribute available (we take the 1st we find) and if that's the case we use this
|
||
|
|
DiskTemp=$(awk -F" " '/Temperature/ {print $1}' <"${MyTempDir}/smartctl.txt" | head -n1)
|
||
|
|
if [[ ${DiskTemp} -gt 0 ]]; then
|
||
|
|
echo -e "\"${HddtempName}\" ${DiskTemp} C \"${DeviceModel}\"" >>/etc/hddtemp.db
|
||
|
|
echo -e "\nAdded disk \"${DeviceModel}\"/\"${HddtempName}\" to /etc/hddtemp.db using S.M.A.R.T. attribute ${DiskTemp}\nbased on the following available thermal values:"
|
||
|
|
grep "Temperature" "${MyTempDir}/smartctl.txt"
|
||
|
|
# check hddtemp result
|
||
|
|
HddtempResult=$(hddtemp -n ${DeviceNode} | grep -v 'not available' | awk -F" " '{print $1}')
|
||
|
|
if [ "X${HddtempResult}" != "X${DeviceNode}:" ]; then
|
||
|
|
# hddtemp isn't able to query the disk
|
||
|
|
HddtempStatus="does not work. Please check with smartctl and adjust config accordingly"
|
||
|
|
echo -e "\nhddtemp output: $(hddtemp ${DeviceNode})"
|
||
|
|
echo -e "\nIt seems we can not rely on hddtemp to query this disk. Please try smartctl instead\n"
|
||
|
|
else
|
||
|
|
HddtempStatus="will work"
|
||
|
|
echo -e "\nhddtemp output: ${HddtempResult})"
|
||
|
|
echo -e "\nIn case this seems not to be correct please adjust /etc/hddtemp.db manually\n"
|
||
|
|
fi
|
||
|
|
else
|
||
|
|
HddtempStatus="does not work. Please check with smartctl and adjust config accordingly"
|
||
|
|
fi
|
||
|
|
else
|
||
|
|
HddtempStatus="will work"
|
||
|
|
fi
|
||
|
|
|
||
|
|
# check for firmware updates
|
||
|
|
FirmwareUpdate="$(grep "^http" "${MyTempDir}/smartctl.txt")"
|
||
|
|
|
||
|
|
# Check whether the disk (based on GUID) is already configured in our config file
|
||
|
|
# /etc/armbianmonitor/disks.conf or not
|
||
|
|
|
||
|
|
grep -q "^${GUID}:" /etc/armbianmonitor/disks.conf >/dev/null 2>/dev/null
|
||
|
|
case $? in
|
||
|
|
0)
|
||
|
|
# already listed, we provide just infos:
|
||
|
|
echo -e "Disk is already configured by the following monitoring config:\n$(grep "^${GUID}:" /etc/armbianmonitor/disks.conf)\n"
|
||
|
|
;;
|
||
|
|
*)
|
||
|
|
# new disk, we recommend an entry for /etc/armbianmonitor/disks.conf
|
||
|
|
echo -e "Disk not configured for monitoring. We were able to extract the following \ninformation:\n GUID: ${GUID}"
|
||
|
|
if [ "X${SMARTPrefix}" != "X" ]; then
|
||
|
|
echo -e " QueryMode: -d ${SMARTPrefix}"
|
||
|
|
fi
|
||
|
|
echo -e " hddtemp: ${HddtempStatus}\n CRC attribute: ${CRCAttribute}\n LCC Attribute: ${LCCAttribute}"
|
||
|
|
case ${HddtempStatus} in
|
||
|
|
"will work")
|
||
|
|
echo -e "If you want to monitor the disk please add to /etc/armbianmonitor/disks.conf:\n${GUID}:${DeviceModel}:${SMARTPrefix}::${CRCAttribute}:${LCCAttribute}"
|
||
|
|
;;
|
||
|
|
*)
|
||
|
|
echo -e "Proposal for /etc/armbianmonitor/disks.conf:\n${GUID}:${DeviceModel}:${SMARTPrefix}:FIXME:${CRCAttribute}:${LCCAttribute}"
|
||
|
|
echo -e "You have to figure out how to query the disk for its thermal sensor."
|
||
|
|
echo -e "Please check the output of \"hddtemp --debug ${DeviceNode}\" and smartctl\n"
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
if [ "X${FirmwareUpdate}" != "X" ]; then
|
||
|
|
echo -e "\nWARNING: A firmware update seems to be available:\n${FirmwareUpdate}\n"
|
||
|
|
fi
|
||
|
|
done
|
||
|
|
} # CheckDisks
|
||
|
|
|
||
|
|
CheckSMARTModes() {
|
||
|
|
# This function tries to access USB disks through S.M.A.R.T. and returns the necessary
|
||
|
|
# '-d' call as well as fills in ${MyTempDir}/smartctl.txt
|
||
|
|
|
||
|
|
for i in auto sat usbcypress usbjmicron usbprolific usbsunplus ; do
|
||
|
|
# user feedback
|
||
|
|
# echo -n "." >/dev/tty
|
||
|
|
# query disk using the specific protocol
|
||
|
|
echo -n "" >"${MyTempDir}/smartctl.txt"
|
||
|
|
smartctl -q noserial -s on -d ${i} -a ${1} >"${MyTempDir}/smartctl.txt" 2>/dev/null
|
||
|
|
DeviceModel="$(awk -F": " '/^Device Model/ {print $2}' <"${MyTempDir}/smartctl.txt" | \
|
||
|
|
sed 's/^[ \t]*//;s/[ \t]*$//')"
|
||
|
|
if [ "X${DeviceModel}" != "X" ]; then
|
||
|
|
echo ${i}
|
||
|
|
break
|
||
|
|
fi
|
||
|
|
done
|
||
|
|
} # CheckSMARTModes
|
||
|
|
|
||
|
|
PreRequisits() {
|
||
|
|
# Ensure that we're running as root since otherwise querying SATA/USB disks won't work
|
||
|
|
if [ "$(id -u)" != "0" ]; then
|
||
|
|
echo "This script must be run as root" >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
export PATH=/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin
|
||
|
|
unset LANG
|
||
|
|
DISTROCODE=$(lsb_release -s -c)
|
||
|
|
|
||
|
|
# check whether gdisk/smartctl are available and up to date
|
||
|
|
echo -e "Check whether necessary software is available\c"
|
||
|
|
which gdisk >/dev/null 2>&1 || (echo -e " Installing gdisk\c" ; apt-get -f -qq -y install gdisk)
|
||
|
|
which smartctl >/dev/null 2>&1 || (echo -e " Installing smartmontools\c" ; apt-get -f -qq -y install smartmontools)
|
||
|
|
echo -e " [done]\nUpdating smartmontools' drivedb\c"
|
||
|
|
/usr/sbin/update-smart-drivedb >/dev/null 2>&1
|
||
|
|
if [ $? -ne 0 -a "X${DISTROCODE}" = "Xwheezy" ]; then
|
||
|
|
sed -i "/^SRCEXPR/{s#=.*#='http://sourceforge.net/p/smartmontools/code/HEAD/tree/\$location/smartmontools/drivedb.h?format=raw'#}" /usr/sbin/update-smart-drivedb
|
||
|
|
/usr/sbin/update-smart-drivedb
|
||
|
|
fi
|
||
|
|
echo -e " [done]"
|
||
|
|
CreateTempDir
|
||
|
|
} # PreRequisits
|
||
|
|
|
||
|
|
CreateTempDir() {
|
||
|
|
# create a safe temporary dir
|
||
|
|
MyTempDir=$(mktemp -d /tmp/${0##*/}.XXXXXX)
|
||
|
|
if [ ! -d "${MyTempDir}" ]; then
|
||
|
|
MyTempDir=/tmp/${0##*/}.$RANDOM.$RANDOM.$RANDOM.$$
|
||
|
|
(umask 066 && mkdir ${MyTempDir}) || (echo "Failed to create temp dir. Aborting" >&2 ; exit 1)
|
||
|
|
fi
|
||
|
|
chmod 711 "${MyTempDir}"
|
||
|
|
trap "rm -rf \"${MyTempDir}\" ; exit 0" 0 1 2 3 15
|
||
|
|
for file in smartctl.txt gdisk.txt ; do
|
||
|
|
touch "${MyTempDir}/${file}"
|
||
|
|
chmod 644 "${MyTempDir}/${file}"
|
||
|
|
done
|
||
|
|
} #CreateTempFiles
|
||
|
|
|
||
|
|
InstallRPiMonitor() {
|
||
|
|
# Installs rpimonitord loosely based on the official instructions from
|
||
|
|
# http://rpi-experiences.blogspot.fr/p/rpi-monitor-installation.html
|
||
|
|
# but using the package from our own repository
|
||
|
|
if [ "$(id -u)" != "0" ]; then
|
||
|
|
echo "Installing RPi-Monitor requires root privileges, try sudo please. Exiting" >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
echo -e "Installing RPi-Monitor. This can take up to 5 minutes. Be patient please\c"
|
||
|
|
apt-get -qq -y update
|
||
|
|
apt-get -f -qq -y install rpimonitor
|
||
|
|
/usr/share/rpimonitor/scripts/updatePackagesStatus.pl &
|
||
|
|
} # InstallRPiMonitor
|
||
|
|
|
||
|
|
PatchRPiMonitor_for_sun8i() {
|
||
|
|
echo -e "\nNow patching RPi-Monitor to deal correctly with H3"
|
||
|
|
cd / && echo "H4sIAOYyv1cAA+xc/XbayJLPv/AUPZg7NrkGIfyVk4yzS5xk4jNO4mOTZOaM7+QK1BhdhETUwoSJ
|
||
|
|
ead9hn2y/VV1S2ph7CTztbtnlzMxSOqqru+qrm7NTCVOGA+80FH9IHKSaTCJoyCNk+ZIhlOZtNTo
|
||
|
|
3u/9tPE52Nvjb3z0937HXO/s7Oy799zOwd7B/o6703Hvtd39vYO9e6L9u2f+gs9MpV4ixL0kjtO7
|
||
|
|
xmHYcPhXEPTXfja+cUjvfU+NqhvVDTGYzkQYe77wIl/4V0MlfE/CJMQwTsSLHR7z7GOaeINU6edB
|
||
|
|
hEcTLw1oUBJPhBokwTRtAS0jCWUqvAxL6KUyoWni6EomKU03TOQHIElj8XYQJ7IluqGKxaWMZILB
|
||
|
|
ioYwQVBAGqg0GCieBkicaRIPHLovVBANpLlBo72rSxEoEcWpmCZyECgpZBTPLjWTR/F0kQSXo1R0
|
||
|
|
2u5eE3/2RVP0RvHEU+IHD6MTXI/SdPrQccZ83ZT+VcuXDsP3RsCNuS4Tb0LTgAUpVDxM514iH4pF
|
||
|
|
PBMDLxKJ9EFwEvRnqRRBStJwIMVJ7AfDBdDg1izyMVc6kgJymSgRD/ni+1dvxPcsgVCczvphMBAn
|
||
|
|
wUBGYAMUTumOGklf9AkNATwnCs4NBeJ5DLyskW0hAzxPBKStSEM72RQG37aISR9bkCHITkQ8JbAG
|
||
|
|
aF1oZWWQrbWcFwz60CEjHsVTcDMCQvA3D8JQ9KWYKTmchdvAgLHi3XHvxes3PdF99ZN41z07677q
|
||
|
|
/fQIY9NRjKfySmpMwWQaBkAMnhIvShcgHQhePjs7egGI7pPjk+PeT6BfPD/uvXp2fi6evz4TXXHa
|
||
|
|
PesdH7056Z6J0zdnp6/Pn7WEOJdElAT8HbIdsnYgQF+mXhAqzfNPUKcCZaEvRt6VhFoHMrgCXR7M
|
||
|
|
eLr4vM6Awwvj6JI5xNhChCDseEhWui0UCPzOmNx8Pm9dRrNWnFw6ocahnMetavVoJAfj4whqufLC
|
||
|
|
w4PWntAfGEEwkaQBJeFavoLM07kkOc5jMSAoVX0aqHEZwX77bmBod5xBM2Q3DAmLOnzePTl/ZqYO
|
||
|
|
hgBMBRwYRgPuwKgMFdtAJPRAmNYmJEdD/H8h4lbFLZ8NbYUwXhJuGMoBxxXgT4FXPRT9GCKMPNBL
|
||
|
|
sSWRl/LjFCEj8u9ACTamobdwIPHpKMeV6dSjcIP4NRixGgfwnZR0ejfCsTIxh2AgyxkiFZmPB3sf
|
||
|
|
kvuZQZkDzJMgTWV0B1I19QZkeWEwCcidICwdFyZTMQxCBMZ3ZD67BjEFmQnFsDtQwutuf3oXfwtI
|
||
|
|
OBi03E6LRH048n0iw902PzrZj53sx+6XYVNQ7kAeOulk6hAbBPplkFrTh79sXZz/vXGh1nz9Jk5h
|
||
|
|
OGIaSg/mOpZySk4wCXCP4xebv4xmE8pEZIYsb3LXOzBC11OKmAraRsgfJLFSsNM+yguYTIzngxjW
|
||
|
|
OwRjYYDKg2LCXSr05ZVIZqFU20A2kEoZ/fcX4s2b46cU/qBm4WAci9TpL5qB79yBcrMfjgN/kx1o
|
||
|
|
k/B7/oSzuGg2P8xksjhEdAIPCLjNJuufkSvf27wDK+Ud9t1hEkgKIoSeaki21JQyeqqjui89CmXT
|
||
|
|
2TkydzkguW3SuhwGEcej+SiAVwbmqTg6fWNXAcZ/IXCiGomiWu3BnlYwPmgzeccRUrJiEpFPIg5X
|
||
|
|
zKyQHzE0Avq59DhV8hRxpMRV4IkXvd7pXRaqaUWgy6kECh2cdKjTuUGmz8w0PfbnWcSBrUpVQEHZ
|
||
|
|
JqWemAIom14iKQPDGKVKtTxJyDwR7uiMm1U3RPkEs09gy7NETmB8StcGEYoMmBzdYVoiMCxCUI3H
|
||
|
|
N1OCW62+9IJoqyE+VSsbhH7qaetX1Qo8MEbRdtrtvTh0ZqWVw0PrOr8sHvAPfYk/1QpPepqAkQ+z
|
||
|
|
QAVgr1b/91q1WkgWSQ98QCkkFIqeJBYojUIhFZ0QAIpCxGm1mIAbZKgM9iiBIiXJ+WmQVIkLTmGw
|
||
|
|
Jsn6ncvMdKj05xoUPo8HFL9h91zOUmjvy2gwmnjJGFNXK0hzP4vmUDi0UnBaOdQ/HrGUq5XKOaGD
|
||
|
|
kb7k+99WK8PA5giChKK4Zk69fqiNZMDEkoG8PaLKA5bBhpGBnRLQ07fPz3sEkt/WgVToQAqMTcbI
|
||
|
|
zGqm2NMiGCdyCQr6eEqyMxmV02u1Au8CEWkyk+IRzA4MbLCTMiG4SkjAYOc5FejfOWqhKA6gHFH0
|
||
|
|
G6HbgQzoX9sxZbyjoH4I6/1glrynG8CSc1b/ZHAtxWOmW8/D02oFsdFTSqB4C+VvqQaSHir3j3JA
|
||
|
|
JTRXTnEULqhEhOfWP92w36XJyow1SDfhNqKPOnQQqxRwW+etl61u66zVa5mgQVNgcA8V0Kt4fljf
|
||
|
|
2hL1LZ9UUvv731StIZz10zQagCKT+BnPDfRSNC9TXJ54Ks1BluIfhYVUTK3FlYJVXrWoDISA7Bpr
|
||
|
|
SfW1Lp/IULIYDGkEFA7mUuNjeehIxvLRKhIxmfqcIgNVJN4Vylm2uS2dwxA0oziSxIT2RZ5SY5xN
|
||
|
|
mX+tEyIXFoU0jWclxg4LvvGMTJ2AszBn61EvC1fDKw+/W+43wrmRO9ect0k+B1qVPNszQqa0Scxr
|
||
|
|
NyKxA5UMhwhKCJVz2TdeZsRiB3DQuxLSG3oQEbAy8NyDDwa/yrc0EWi0Hy8NzeV716DM+HZGa1qe
|
||
|
|
IuexrIQNREd8aZeaUmcj/axtr8vDnzdvG6os51MswVGl0FOV2Yw9er3ZZNHUzHp3nK3Q4kw0owda
|
||
|
|
RvmIa+HNx6L5vCZqYtPpxSlykfg0TZAxRX13uUmC1ZCuCUHjEfU9KhVarxBiORihCopEe+W5JlOF
|
||
|
|
VCIaN81lVa348KTqEhGeMqdZpNm5zUqm+T26pqwmxSmKOMTmaeBTatvOEh8WApIzgRZIfUM0EYZd
|
||
|
|
SwxMbL0uHtfqn9xlDXdSLHBELZmIC751UUNgR7hIRbsGllzY945w93RequQpFgm5M5QftwWn0W1h
|
||
|
|
SnqOOgrpL53EURrHoRKm/oBdIY/4nEFQnzEYBEYBKpoh2nQef+uKa2hjmjYpoUCZzQ8fRHORwWqQ
|
||
|
|
DN7M/3UY1Cz6GDSZrAxPRvdX4TFAGQ7md5CGX0mMLSWI9hSRrnPObbAnQXToUPFv9PgNgUM75SFL
|
||
|
|
p2ia1SwVryCqwX2HK2b+ywVReuFMJgPU9e2pW5j8/nKzUcs86qsmNlWGsbHaEepbaqUNaWlUALTE
|
||
|
|
M2NBMfXZIIOAl0nIQhNaRUu/Jh5/2yHHCuPLS3jo78CUEyUqbNKudkv+N4uoAXHSffV9dSVHtfWN
|
||
|
|
Il6aG2+UTCgkZdevkDPt63MucOw7x35YGnH8+p0XpKU7yYcSini4eqsUB9scMm4Ei2q1VEbq2MFq
|
||
|
|
2H1A7XJY5tdUYhPvo6nEGIdd3n4dossYNVcUI0KXK32HY6+PpWJeLpvgmcdldiAqh1H1BJSB9zu7
|
||
|
|
xMkDd5++3Hb7AX93eD8gK0Z1tHXzQBf8Zs7z+FySbLVarq2zKC11d1s8Peu+LLrgeddotcUNnkzJ
|
||
|
|
lSYSSYTXcvWtGfeomklD0HKnstu6b9L3BDmCVl9iDHHKcJuWI9xWpBzAK4SnPdRIs+GQxj953T17
|
||
|
|
isxtPP6QPV7fLPy8g9T2nSPTgeMlk37gRU2sHKmnwVNqgj4x0FJTU6lEXhRPg/vXceJFl3IKX5P5
|
||
|
|
7xBZiSErlae9Jzp6OX7adxBzHwTN0U4zG9kEWAtP9OBHj/j7/hfCTgeroFJ5A/p+zYUjpH2KtXCq
|
||
|
|
wL6fDkTzWGC8aL7Gl6KivPdkacXCQ46GcQbanDJsWUjXUCMsVYpN5XznOJvm5+NH+N3I839tA9hX
|
||
|
|
aFjWjFFbi628XgCSiyhb55AZbYrH60Zre+uxta2ZopoJYqeVmUuWGr/7TODuWOnqWlywUOUl1u6i
|
||
|
|
9svJ29b7a/x9f02WLSfXpJP3Azjw+Jod5PoXP/Em72srkM0rUYNP6SE8gn7RKL1w5HLa+KotubNn
|
||
|
|
pyc/cTnCjrdObl8tOu062j1WnmatJfZSFO60pqPhhnvUy+BfU74KCXOgdkYzuYUnSioZP3zDLGAP
|
||
|
|
67t8qZch9sKWSrS2XalWNnJGazz4ou6ijKYIsWUDOhQF2yi7M+CL6CLNqtH6JxbP8gLx4mJQW29c
|
||
|
|
mKkP8seGsqyixc8KQ8OLtFq7Loul3lknkLw+LhUZVg3dyJD+VWzdEDFMqiziP4G/ddyFfwZ3vF7T
|
||
|
|
CYrFupaVk7furRb8ZQzl7Ci5nsZhcBEtbyGSYhKHZkqhK/2oqh3TdAYNDusbWXPpZ0rbucbYrTIO
|
||
|
|
SZLfBJYQ8WxrK2g2+Vfuafm4lQG3KKhQzm9TidbEbxdXIaKeEVCpG5nVGKbr5wnlDfUWD9JishB+
|
||
|
|
kGSbhNTuok1d3e+kzok0G+pZw5MiH89frbxcmAkgsAnvqoimrx8WJzpaP/KnUaxEfFoQ5LBLe+VR
|
||
|
|
YFzFUj/rvnr6+uXN7zopaDbx1Fi0Dw7Et9+KyZgYsqdo0EJqSyeL5zBdvc9lxMF0A6Ilun0EZmRG
|
||
|
|
Xj9ki1i3oat9KiNJKlRJ6tai6XUIu1sisv0lYflLXpLywj6L9Jl+a1gmPy6LxKl/oqk4naG4jX2x
|
||
|
|
v7t7+5Aw4tWhEusGaH2Yi8zUNNID111RBVlSYTrPyQhMZ4E7dZkhvcv6dGabP+8Smq3IovHXp4Rv
|
||
|
|
SlWFap03nL0+qnruRrJVYgVL+wYOfiisR1DPSz6SUC81Jo391H5cbVhyEfYjtyxroumJ5ongip2n
|
||
|
|
ZqoK+yKIopOWXeX0k4tnK7lb+mjZo6yHVlxb/bPMCIDPZMQcY40URqzTGFPCw6JKFN/Pi4Gc5WI0
|
||
|
|
+P3mUGz+WIbYLOWmM29+F6c2uo2N+85Sp5+CRovNmxKwkMOxuOLifGLSSU5yPkgrSNh+Xjb+8sbs
|
||
|
|
Sl+sVsJ0Y6xZjOeLWm0rVYvnzGi5XLN7/XQ+hLZ3sg7Olh9LFW2mYu6N8WwqeC2Y7YvprbBxFM+V
|
||
|
|
GMVzCiC+9ELuqFHsLHq4erQ/0ycPaI9uEM58xBzaAOnTuogBCJU57ABnBM+NVrVC6CBgo7l8O8vJ
|
||
|
|
aOR84C7t0hvKsyDMaBStE9E80oOvhamtPyC3pGCjv7jOeKtRaCzmyTtRiNIKsQ3+ZFCUmpxFl/39
|
||
|
|
kczbnUOxVftbu9Ue1rbrbrvxSHAdkBuEodLYg20OG8JPAoSEQOUy5xVqIjFFJNpZtGzn/qQX5zlK
|
||
|
|
Q9/mGjruU6JnWnQcJwn3+MQFb05Kv+i+DTw+NRFCu9QCkrRh65HeBQV3hPiUiOQdUerne5NpqMPY
|
||
|
|
m/MnHMq05u1mP4JZGFOPSenNfWplZusHL1JzBM+bm0PFGY8FbUMS5vNuD+RNCfQhrunWn6c0M4F1
|
||
|
|
AqkPqvmMFzNBrTS9F5azJ9RsSru0GZvZYQZFpw4gnmYaN8FDl5npJ4F/Kel8wodZQE3n3HVo13ci
|
||
|
|
ITuFdH3ZEpvgaKb6/5oEgySONimBcNfCEzQvbzGOBW03bPC5OWVOMZU6o3yeaR6MA+dc0yj990TR
|
||
|
|
U5OUmFapUu2VuSzTOAsa+nxOktAeJu/bZGevspteak6jkQevio4P+pTl55mds/6imM4L595CcehR
|
||
|
|
N2NPS5zHLLrg1gMFnmV1ZI8cWHibDg7Ie5KRydYmBECNST4N4SZBZPiJvUK58AbLAGnHLxpTFp/x
|
||
|
|
Ocdh8JF3yQFSdiUWKG8Owwr0Ea0wGBcG/EfFqlYrk7t93iKlvclMOpNZmAbkrivHmMCkT+LWui+R
|
||
|
|
aVCaRparm1gb3AvO6wVxe4QGUYLWMCWIfuMWt4WRT5M4DIbBIHfftRgGjT9ObiZcFPPk6y0rfWKx
|
||
|
|
Ze2t6WTKLYqt0n4AneC12l61i7RW3+G/u/x3j//u898D/vuA+4f5YVpkirw9Xnerlbw3Xu9UK1Zj
|
||
|
|
vL5TreRdcWqJWC3x+h4uTfO7vg8wqxleP6DYT1M8RbgxS7xsRizwTT1X3KEFHxFhDc9oKoYXd2i4
|
||
|
|
JtMCKOguQOx7BETMWCAZbwVAcYeHM7s2QM6/BWLdY6Dkgw2hRWINz24wE1poNheFGC027JsEV63w
|
||
|
|
3qclWUKxFH83giuuCjHp60wC5ipn0FxrWgxoQZyeFSvvk9jzeVaal2nQVBZoG+I+rff17r4e0DD2
|
||
|
|
lgPbJN9fM1gTbQ23uVgHQDxbwwsRrBusmbaG21JYC5B8OIoncGfpl/i/Q1pr8VTzKttIcpmzll1l
|
||
|
|
YloaLrLfBc1LPbFNUF6rZycCVnbALN9b2Quz3OzGrljJo1Z2yCzXubFXVvKS8r5Z4Q43N9DKpq/b
|
||
|
|
LPZBg+rKcYxsqZEdtNPpnhvIVE+mMm5NRwsVjFuzKGhOaKmLArjl66JyglDtzaXv4QZhsc+yWGd9
|
||
|
|
XwJ2MNLHuOIJkOtGzaQl3tGxOzOSig3kZ8KDaqVPZ4OVPpfHNQEl61gf0eeKJjswrCtuFMXFSR4a
|
||
|
|
ipor8S5Blc2tm61QKKno3lCTqrDWEEVMc0avLwAG6WDzZfwr8HvOXqsttl56A3rvQo0eCTrNEArc
|
||
|
|
EK/PxY9w0ff4b7chulOk6ney/0OQOvvtduug5XbE1g8vei9Ptjk3I0ENxnFDvNVvCTgPWhgkzr2h
|
||
|
|
lwQ5BMpFf4aMXLPOt9+lBMePxzMuFOkHBk3/LfAP5zIFyw9hw376cALVzzihlkrrk9kwLbS1rrLe
|
||
|
|
LZYhjbIUO/8bpWhZqqMFRAd8ImdVMN2ZGs4ejpIQFivXyaVTkou1WCyJaM2ScUWEpfHuktaJa1G5
|
||
|
|
n0HlHq5OzYcf+eiKXnOaOFtGytG2DCfooFOHYqwpqOzH1Wqpq5LFDT4Mnp2pNY5s3m/h/Uty5fZ/
|
||
|
|
/sdRE0LDl1knctlKB+bstwLI/yeeUlixwt2pUjehQCPSCzREAz48za8oYNk5o3WY3mumU318PtAz
|
||
|
|
72cA4+WMj/PSKh0rKX5JhnHoRqpeQmShwsQVFOBqEtPbE2aOLf1ODkey05dvmJDz+Mj0CX7WxWwz
|
||
|
|
TKl3v3LoqBnpBoA9EBO5ev9+zWgakncMNBTsoZNbwJp+lAa5cTLLaN0lPXdQTOyxdvf19oDVgipp
|
||
|
|
VZ9p1keM/7tfuPsf9qFTA0Vz36HGWAtG9oe+6cjvfx4c3PL+p77ndvY7e/udnYMD3O/sdjr790TH
|
||
|
|
WaGOIjsdiXdes++cBu9f7Pxeav+Pv/95m4S7YTgPokgmEPF7CpiRL/3fKGtW9+7uLfp39w529/X7
|
||
|
|
v3sHO51d2EnH3XPb///+71/x2fiDPsVrweLFTumd4GaT22FkP9m7pBgsTpGaHgqXfh5bo8sfKu5n
|
||
|
|
Kv+pX/whkCa/qEyb4lQ1LiyQplhIZf3Uo+n8yrrh60dnmZPfO3a3xd62cPdux80vi4K7/N3pu3DT
|
||
|
|
IHNETWRn6m6MjuJ8sLL28D5D9q9xJF0HOby0YLmV7JW3Le7GXTo0b0GsJZtf5BZXcZiSFD9H9iCO
|
||
|
|
WRq0OL179B9lq/l7hfr1xuyUE9uG9TB7W/FLTh3im4y+ePOlQGNeXdyiM13F3Wms0qlewh4qXY2j
|
||
|
|
GG/toBZHeePoWqptQySJf/h99833z6r5TfN+Jhmdu01/9/ivu2eNyLiw3423Ht/xYqU1yqbWBr5J
|
||
|
|
0o4m6cax0eL514j1DjTrxLqzntAdJrSgcbfQO7/uaz3IiMvWgZgiEVRt/jO/ZZZVD3W71UwWJyvn
|
||
|
|
Mc3/jMDYhTBtX4LPjuz805p2HTO765nZXSf1Pc1RfkyvbMr/1d7R7rZtA/dbT0EobmIv/tBHFCdN
|
||
|
|
nKJN0ixD87F2HQZ0hWHHbmLUtjxLTpq1fac9wH5tLzbekZQoi7Ist2tXgAe0kcXj6Xg88kgddecp
|
||
|
|
ZQ6GHibeBjtL3+tNUeS0mIk+cTel156SZ6+wXnuq5mxzJfKv0Lkc3xbtkA67yktX/sFOI11RZnYt
|
||
|
|
vp3BrS1xWzHU6DLxdAuarAXyiRSpTP4OOgNFJd1mMX6bKsZ2uKYIx318X/lxdlysYminGEM7KoZ2
|
||
|
|
GUO3YDO4yZDKZKbYB4NxmYqj3SyOHCVHuyqObCueH8AoVdnsxK7hPRC7GtNRxK4G/l1nEPLr6e94
|
||
|
|
IVOTGyHewkrF+d+2Z8zLtK5SI4GmolnC3DF7i+ZWLlTNEbeDaTjrDBv8VUiD122zcgunhRQhpcGz
|
||
|
|
M1hV2jUReCD6LCwjhgD7PisdJiD56AzzZSfs112/Ww9wuUlNLT8JJRYIh5cvs8oH9BLYrE/G11k4
|
||
|
|
cNy/brd+pB1/QrX7SWdaNuHNPFVI06bto3+tKp5JqTNLTtwqvEypkh2rsmkSc1NZ1UtX9Zasaivq
|
||
|
|
2snKCxvjtEz4GD8E78VDst89MKmFZO8O+Jihv80H+43uASm/uA/AVnIEaSwhTpWA+0FCiAYYLz5t
|
||
|
|
XBAYXhKKNN44EjgqJIRoaGJxxVzYGJc1JjKb6QbFGwdK7uSHP7Bd6+NuMNnDr0QyqiatsVR3MT9b
|
||
|
|
LfOEL3eS9OYXQ0BRYuXxFZ6KgbbAXBqk28FimyRr4Vo9iSpPxQLbzBghfLknHWnJwhMjpQ12BYfL
|
||
|
|
WgamarzQXQ0o7t9/0j9Ca7mVJ0xp4d+OVaVsXFEyh/7QnwZVz6o2VQMBfOopetGJ0QUEtyxKU0Hw
|
||
|
|
7J+/0HuRIpo4k7qAsGtVXS9j1H2bIjnk+zrYufeBckxWNkEE9tdKwnbVqcRqxzb/6ckZ5jTSIIdw
|
||
|
|
ADOY9Pu9gP5S6aOCAL4Kp3LF+S8f0UFELx/RbfFtWC7m1tzuM7eCN7/Iz62xLW10cpGb0aI7F3Un
|
||
|
|
uWbLxd+NF535XWJFq68lkO3kmia/ghOvLBYg94I24rdZULSAmcn6sNPtD5na2eAqLkzCk0l4K5Gw
|
||
|
|
EzTs4kQSWsdpgeXAYURwHJEyNVeVT6B633k3CFpOIQpJ5eaMoZH9NM7m6K7CWjSKOFexvQ1WpLMK
|
||
|
|
F3x4ch7Eyz5SptN24b7CEcAp4VK6UbgljMRKPc0nA9HH4nXkCk2R5yFOjr2CLP/yCYRW0hFpHhKj
|
||
|
|
SjaDqxNbVWMBVxrfuGQn5QcL5ZKkcm/jo98TuovCz/LpQnvYfxNSk057/yFx6cZh1Hn3kDQ98rEA
|
||
|
|
WSdNFoNympRKNhm+MzwSL92hUewM0IIqws7n2xQnMvXSRiUf3W1F25Z85K1WtD/JR/Za0m4nH327
|
||
|
|
Fb2AWID7mTRFQUiSmpii8E5hQpE8ORnYJRYmEsmZE4FtYmEikvw5GbElLU6K942g8/ynBoSNpbfz
|
||
|
|
SBUbkhYfkXDMkA6mBYceCvl/22c8eEExR3Ce/3e76cX+X3ptOa4L/n/t//3v4bP51LT/V/t/tf9X
|
||
|
|
+3+1/1f7f//n/t+V3b/az6v9vNrPq/282s+r/bzdg3M/jNfm2q2r3braravdutqtq9262q2r3bra
|
||
|
|
ravdutqtq9262q2r3bpfwa27NHyBL6xz/L+WbbsOz//r2N6W+51lN7dsR/t/vwSAbk7ALOI+fmMw
|
||
|
|
um4M/WsfNvIbRlQ46o9n4SAc9lsbF5eD2hnTFkL2g1n3oLyxibu/Gz8IYRLf3KjsN6BAIgD/KQgo
|
||
|
|
qm7MvZFAs8C0kVwO0mNprtzgMT5bmbEDRD5b0Op87NkEAnow5LVcbPnUxJIPWOKgRT6RUX/kT++X
|
||
|
|
5TK460yWJBz0rjrT3pLI435450/fMmwdaOObAOhLSBJY76Vzv3+uZyzO/265rgPnf7Zda9trYrnt
|
||
|
|
OZ6r5/8vATz/O2R/X1sjT45PTs/J6fnpz/S/pxcGRlm7HfTgrXMEKT2haM9ZANle7QWk2EHk0pRO
|
||
|
|
SmG//SYgJbp8pFYliedPGE0l3lH/TWc2DCVymLxsi3iJQkEDs5tt06Jfa5iXrYN7eFYGCS5pyYsb
|
||
|
|
fxrWjvosbQqurZ5LlojnE4ONatSoBDIDuQrDE5ntMXkoCgt2hdz7F1T5WZgOTwgtH59BiR+fH0ny
|
||
|
|
Bj5ZZs8ocN1w0IXUAHWjThr0ujEMujhgawIjMIyjx8dnF+ctcy4na3pE14Mb07g8PXp6+uyYot92
|
||
|
|
po3pTIU3GfRMw3hFau9IiVEnryF2KcsmZxgYdB6GTLny3iAsD4pZKg96pDarYFx0iCcuwjqB5Fhw
|
||
|
|
Q8wfz6RKRpAdFyLdzcYQ3BmomQyV5ffCYF90mQsDNMTAXLQz/dnVDSnxJkB2VZT7AOPllspXnTAq
|
||
|
|
rGDoduw1yl6ZvIXAejWLlAD7gMzld6tIrApmFZ1Nue8MIUvMPbA9pl1dN/d4JbZkEb9ExOw9EbaM
|
||
|
|
EIjLvgc8Ux1vM7Vpj4JrYqKWg9qkn2jS3fN874CUYAsE8bDs3aiDRMPJuiGYaZUe8cfRZQU+q8QK
|
||
|
|
mFz9iVqsKg79yaQYh0t0DOsS21P3CZfYEo2h0h7F3NOmQX7kWGmgofAHE4o5jN405KpF6zMdjgLh
|
||
|
|
K7qd4dHdmNB1zKYXCTyt5+Ab5Aoi6bRlcE1YWjZZ6rq+HvP7ivxGbegre891Rv5bvLZG5DXGGo6R
|
||
|
|
8L5rj54+Pn3GcV6j6jKtZIyDTKKhbWDAZbNkmxBwmUuNpVlnAiQQrJiJV9xGQfO7ILIInXUTlvDO
|
||
|
|
YUX8hyj7viIJ8WWAZ0RLFnmPSB+A/gde4wMj+tFkVTFgssGl/LWNqgYNGjRo0KBBgwYNGjRo0KBB
|
||
|
|
gwYNGjRo0KBBw1eEfwH4UoBHAKAAAA==" | base64 --decode | tar xzf -
|
||
|
|
which systemctl >/dev/null 2>&1
|
||
|
|
case $? in
|
||
|
|
0)
|
||
|
|
# Jessie|Stretch|Xenial|Bionic
|
||
|
|
systemctl enable rpimonitor-helper >/dev/null 2>&1
|
||
|
|
systemctl start rpimonitor-helper >/dev/null 2>&1
|
||
|
|
systemctl restart rpimonitor >/dev/null 2>&1
|
||
|
|
;;
|
||
|
|
*)
|
||
|
|
# Wheezy|Trusty
|
||
|
|
insserv rpimonitor-helper >/dev/null 2>&1 || update-rc.d rpimonitor-helper defaults 90 10 >/dev/null 2>&1
|
||
|
|
cd /tmp && nohup /usr/local/sbin/rpimonitor-helper.sh & >/dev/null 2>&1
|
||
|
|
/etc/init.d/rpimonitor stop >/dev/null 2>&1
|
||
|
|
/etc/init.d/rpimonitor start >/dev/null 2>&1
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
} # PatchRPiMonitor_for_sun8i
|
||
|
|
|
||
|
|
CollectSupportInfo() {
|
||
|
|
[[ -s /var/log/armbian-hardware-monitor.log ]] && cat /var/log/armbian-hardware-monitor.log || zcat /var/log/armbian-hardware-monitor.log.1.gz 2>/dev/null
|
||
|
|
[[ -f /boot/armbianEnv.txt ]] && LOGLEVEL=$(awk -F'=' '/^verbosity/ {print $2}' /boot/armbianEnv.txt)
|
||
|
|
LOGLEVEL=${LOGLEVEL:-1}
|
||
|
|
if [ ${LOGLEVEL} -gt 4 ]; then
|
||
|
|
VERBOSE='-v'
|
||
|
|
which lshw >/dev/null 2>&1 && (echo -e "\n### lshw:" ; lshw -quiet -sanitize -numeric)
|
||
|
|
fi
|
||
|
|
lsusb >/dev/null 2>&1 && (echo -e "\n### lsusb:\n" ; lsusb ${VERBOSE} 2>/dev/null ; echo "" ; lsusb -t 2>/dev/null)
|
||
|
|
lspci >/dev/null 2>&1 && (echo -e "\n### lspci:\n" ; lspci ${VERBOSE} 2>/dev/null)
|
||
|
|
nvme >/dev/null 2>&1 && (echo -e "\n### nvme:\n" ; nvme list 2>/dev/null)
|
||
|
|
[ -z $SUDO_USER ] || echo -e "\n### Group membership of $(groups $SUDO_USER)"
|
||
|
|
echo -e "\n### Userland:\n\n$(grep PRETTY_NAME /etc/os-release)"
|
||
|
|
echo -e "\n### Installed packages:\n\n$(dpkg -l | grep -E "openmediavault|armbian| linux-")"
|
||
|
|
KernelVersion=$(awk -F" " '{print $3}' < /proc/version)
|
||
|
|
case ${KernelVersion} in
|
||
|
|
3.*)
|
||
|
|
[[ -e /boot/script.bin ]] && echo -e "\n### fex settings: $(ls -la /boot/script.bin)\n\n$(bin2fex /boot/script.bin 2>/dev/null)"
|
||
|
|
;;
|
||
|
|
esac
|
||
|
|
echo -e "\n### Loaded modules:\n\n$(lsmod)"
|
||
|
|
[[ -f /var/log/nand-sata-install.log ]] && echo -e "\n### nand-sata-install.log:\n\n$(cat /var/log/nand-sata-install.log)"
|
||
|
|
echo -e "\n### Current system health:\n\n$("$0" -s | grep -E "^Time|^[0-9]")"
|
||
|
|
stress -t 3 -c $(grep -c processor /proc/cpuinfo) --backoff 250 >/dev/null 2>&1 &
|
||
|
|
"$0" -s | grep "^[0-9]"
|
||
|
|
# Include name resolving information only if upload is not possible
|
||
|
|
fping ix.io 2>/dev/null | grep -q alive || \
|
||
|
|
[ -f /etc/resolv.conf ] && echo -e "\n### resolv.conf\n\n$(ls -la /etc/resolv.conf ; cat /etc/resolv.conf)" || \
|
||
|
|
echo -e "\n### resolv.conf does not exist or readable"
|
||
|
|
echo -e "\n### Current sysinfo:\n\n$(iostat -p ALL | grep -v "^loop")\n\n$(vmstat -w)\n\n$(free -h)\n\n$(zramctl 2>/dev/null)\n\n$(uptime)\n\n$(dmesg | tail -n 250)"
|
||
|
|
echo -e "\n"
|
||
|
|
[[ "$(id -u)" -eq "0" ]] && for sysfsnode in /proc/sys/vm/* ; do sysctl $(echo ${sysfsnode} | sed 's|/proc/sys/vm/|vm.|'); done
|
||
|
|
echo -e "\n### interrupts:\n$(cat /proc/interrupts)"
|
||
|
|
ls /tmp/armbianmonitor_checks_* >/dev/null 2>&1 || return
|
||
|
|
for file in /tmp/armbianmonitor_checks_* ; do
|
||
|
|
echo -e "\n### \c"
|
||
|
|
ls "${file}" | cut -f1 -d.
|
||
|
|
echo
|
||
|
|
cat "${file}"
|
||
|
|
done
|
||
|
|
} # CollectSupportInfo
|
||
|
|
|
||
|
|
CheckCard() {
|
||
|
|
if [ "$(id -u)" = "0" ]; then
|
||
|
|
echo "Checking disks is not permitted as root or through sudo. Exiting" >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
if [ ! -d "$1" ]; then
|
||
|
|
echo "\"$1\" does not exist or is no directory. Exiting" >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
TargetDir="$1"
|
||
|
|
|
||
|
|
# check requirements
|
||
|
|
which f3write >/dev/null 2>&1 || MissingTools=" f3"
|
||
|
|
which iozone >/dev/null 2>&1 || MissingTools="${MissingTools} iozone3"
|
||
|
|
if [ "X${MissingTools}" != "X" ]; then
|
||
|
|
echo "Some tools are missing, please do an \"sudo apt-get -f -y install${MissingTools}\" before and try again" >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
# check provided path
|
||
|
|
Device="$(GetDevice "$1")"
|
||
|
|
set ${Device}
|
||
|
|
DeviceName=$1
|
||
|
|
FileSystem=$2
|
||
|
|
echo "${DeviceName}" | grep -q "mmcblk0" || echo -e "\n${BOLD}WARNING:${NC} It seems you're not testing the SD card but instead ${DeviceName} (${FileSystem})\n"
|
||
|
|
|
||
|
|
TestDir="$(mktemp -d "${TargetDir}/cardtest.XXXXXX" || exit 1)"
|
||
|
|
date "+%s" >"${TestDir}/.starttime" || exit 1
|
||
|
|
trap "rm -rf \"${TestDir}\" ; exit 0" 0 1 2 3 15
|
||
|
|
LogFile="$(mktemp /tmp/armbianmonitor_checks_${DeviceName##*/}_${FileSystem}.XXXXXX)"
|
||
|
|
|
||
|
|
# start actual test, create a small file for some space reserve
|
||
|
|
fallocate -l 32M "${TestDir}/empty.32m" 2>/dev/null || dd if=/dev/zero of="${TestDir}/empty.32m" bs=1M count=32 status=noxfer >/dev/null 2>&1
|
||
|
|
ShowWarning=false
|
||
|
|
# Start writing
|
||
|
|
echo -e "Starting to fill ${DeviceName} with test patterns, please be patient this might take a very long time"
|
||
|
|
f3write "${TestDir}" | tee "${LogFile}"
|
||
|
|
touch "${TestDir}/.starttime" || ShowDeviceWarning
|
||
|
|
rm "${TestDir}/empty.32m"
|
||
|
|
# Start verify
|
||
|
|
echo -e "\nNow verifying the written data:"
|
||
|
|
echo "" >>"${LogFile}"
|
||
|
|
f3read "${TestDir}" | tee -a "${LogFile}"
|
||
|
|
touch "${TestDir}/.starttime" || ShowDeviceWarning
|
||
|
|
rm "${TestDir}/"*.h2w
|
||
|
|
echo -e "\nStarting iozone tests. Be patient, this can take a very long time to complete:"
|
||
|
|
echo "" >>"${LogFile}"
|
||
|
|
cd "${TestDir}"
|
||
|
|
iozone -e -I -a -s 100M -r 4k -r 512k -r 16M -i 0 -i 1 -i 2 | tee -a "${LogFile}"
|
||
|
|
touch "${TestDir}/.starttime" || ShowDeviceWarning
|
||
|
|
echo -e "\n${BOLD}The results from testing ${DeviceName} (${FileSystem}):${NC}"
|
||
|
|
grep -E "Average|Data" "${LogFile}" | sort -r
|
||
|
|
echo " random random"
|
||
|
|
echo -e "reclen write rewrite read reread read write\c"
|
||
|
|
awk -F"102400 " '/102400/ {print $2}' <"${LogFile}"
|
||
|
|
|
||
|
|
# check health
|
||
|
|
echo -e "\n${BOLD}Health summary: \c"
|
||
|
|
grep -Eq "Read-only|Input/output error" "${LogFile}" && (echo -e "${LRED}${BOLD}${DeviceName} failed${NC}" ; exit 0)
|
||
|
|
grep -q "Data LOST: 0.00 Byte" "${LogFile}" && echo -e "${LGREEN}OK" || \
|
||
|
|
(echo -e "${LRED}${BOLD}${DeviceName} failed. Replace it as soon as possible!" ; \
|
||
|
|
grep -A3 "^Data LOST" "${LogFile}")
|
||
|
|
|
||
|
|
# check performance
|
||
|
|
RandomSpeed=$(awk -F" " '/102400 4/ {print $7"\t"$8}' <"${LogFile}")
|
||
|
|
if [ "X${RandomSpeed}" != "X" ]; then
|
||
|
|
# Only continue when we're able to read out iozone results
|
||
|
|
set ${RandomSpeed}
|
||
|
|
RandomReadSpead=$1
|
||
|
|
RandomWriteSpead=$2
|
||
|
|
ReadSpeed=$(awk -F" " '/Average reading speed/ {print $4"\t"$5}' <"${LogFile}")
|
||
|
|
set ${ReadSpeed}
|
||
|
|
if [ "X$2" = "XMB/s" ]; then
|
||
|
|
RawReadSpead=$(echo "$1 * 1000" | bc -s | cut -f1 -d.)
|
||
|
|
else
|
||
|
|
RawReadSpead$(echo "$1" | cut -f1 -d.)
|
||
|
|
fi
|
||
|
|
echo -e "\n${NC}${BOLD}Performance summary:${NC}\nSequential reading speed:$(printf "%6s" $1) $2 \c"
|
||
|
|
[ ${RawReadSpead} -le 2500 ] && Exclamation="${LRED}${BOLD}way " || Exclamation=""
|
||
|
|
[ ${RawReadSpead} -le 5000 ] && Exclamation="${Exclamation}${BOLD}too "
|
||
|
|
[ ${RawReadSpead} -le 7500 ] && echo -e "(${Exclamation}low${NC})\c"
|
||
|
|
echo "${Exclamation}" | grep -q "too" && ShowWarning=true
|
||
|
|
printf "\n 4K random reading speed: %6s KB/s " "$RandomReadSpead"
|
||
|
|
[ ${RandomReadSpead} -le 700 ] && Exclamation="${LRED}${BOLD}way " || Exclamation=""
|
||
|
|
[ ${RandomReadSpead} -le 1400 ] && Exclamation="${Exclamation}${BOLD}too "
|
||
|
|
[ ${RandomReadSpead} -le 2500 ] && echo -e "(${Exclamation}low${NC})\c"
|
||
|
|
echo "${Exclamation}" | grep -q "too" && ShowWarning=true
|
||
|
|
WriteSpeed=$(awk -F" " '/Average writing speed/ {print $4"\t"$5}' <"${LogFile}")
|
||
|
|
set ${WriteSpeed}
|
||
|
|
if [ "X$2" = "XMB/s" ]; then
|
||
|
|
RawWriteSpeed=$(echo "$1 * 1000" | bc -s | cut -f1 -d.)
|
||
|
|
else
|
||
|
|
RawWriteSpeed=$(echo "$1" | cut -f1 -d.)
|
||
|
|
fi
|
||
|
|
printf "\nSequential writing speed: %6s %s " "$1" "$2"
|
||
|
|
[ ${RawWriteSpeed} -le 2500 ] && Exclamation="${LRED}${BOLD}way " || Exclamation=""
|
||
|
|
[ ${RawWriteSpeed} -le 4000 ] && Exclamation="${Exclamation}${BOLD}too "
|
||
|
|
[ ${RawWriteSpeed} -le 6000 ] && echo -e "(${Exclamation}low${NC})\c"
|
||
|
|
echo "${Exclamation}" | grep -q "too" && ShowWarning=true
|
||
|
|
printf "\n 4K random writing speed: %6s KB/s " "$RandomWriteSpead"
|
||
|
|
[ ${RandomWriteSpead} -le 400 ] && Exclamation="${LRED}${BOLD}way " || Exclamation=""
|
||
|
|
[ ${RandomWriteSpead} -le 750 ] && Exclamation="${Exclamation}${BOLD}too "
|
||
|
|
[ ${RandomWriteSpead} -lt 1000 ] && echo -e "(${Exclamation}low${NC})\c"
|
||
|
|
echo "${Exclamation}" | grep -q "too" && ShowWarning=true
|
||
|
|
if [ "X${ShowWarning}" = "Xtrue" ]; then
|
||
|
|
echo -e "\n\n${BOLD}The device you tested seems to perform too slow to be used with Armbian."
|
||
|
|
echo -e "This applies especially to desktop images where slow storage is responsible"
|
||
|
|
echo -e "for sluggish behaviour. If you want to have fun with your device do NOT use"
|
||
|
|
echo -e "this media to put the OS image or the user homedirs on.${NC}\c"
|
||
|
|
fi
|
||
|
|
echo -e "\n\nTo interpret the results above correctly or search for better storage
|
||
|
|
alternatives please refer to http://oss.digirati.com.br/f3/ and also
|
||
|
|
http://www.jeffgeerling.com/blogs/jeff-geerling/raspberry-pi-microsd-card
|
||
|
|
and http://thewirecutter.com/reviews/best-microsd-card/"
|
||
|
|
fi
|
||
|
|
} # CheckCard
|
||
|
|
|
||
|
|
ShowDeviceWarning() {
|
||
|
|
echo -e "\n${LRED}${BOLD}Test stopped, read-only filesystem\n\n${NC}${LRED}$(dmesg | grep 'I/O error')"
|
||
|
|
echo -e "\n${BOLD}Please be careful using this media since it seems it's already broken. Exiting test.\n${NC}"
|
||
|
|
exit 0
|
||
|
|
} # ShowDeviceWarning
|
||
|
|
|
||
|
|
GetDevice() {
|
||
|
|
if TestPath=$(findmnt --noheadings --output SOURCE,FSTYPE --target "$1" --uniq); then
|
||
|
|
echo "${TestPath}"
|
||
|
|
else
|
||
|
|
echo "Bud Path: $1" >&2; exit 1
|
||
|
|
fi
|
||
|
|
} # GetDevice
|
||
|
|
|
||
|
|
VerifyInstallation() {
|
||
|
|
# Ensure that we're running as root since otherwise querying SATA/USB disks won't work
|
||
|
|
if [ "$(id -u)" != "0" ]; then
|
||
|
|
echo "This check must be run as root. Aborting." >&2
|
||
|
|
exit 1
|
||
|
|
fi
|
||
|
|
|
||
|
|
echo -e "Starting package integrity check. This might take some time. Be patient please..."
|
||
|
|
OUTPUT=$(dpkg --verify | grep -Evi "${VerifyRepairExcludes}" | awk -F" /" '{print "/"$2}')
|
||
|
|
if [[ -z $OUTPUT ]]; then
|
||
|
|
echo -e "\n${LGREEN}${BOLD}It appears you don't have any corrupt files or packages!${NC}"
|
||
|
|
else
|
||
|
|
echo -e "\n${LRED}${BOLD}It appears you may have corrupt packages.${NC}\n"
|
||
|
|
echo -e "This is usually a symptom of filesystem corruption caused by SD cards or eMMC"
|
||
|
|
echo -e "dying or burning the OS image to the installation media went wrong.\n"
|
||
|
|
echo -e "The following changes from packaged state files were detected:\n"
|
||
|
|
echo -e "${OUTPUT}\n"
|
||
|
|
fi
|
||
|
|
} # VerifyInstallation
|
||
|
|
|
||
|
|
NetworkMonitorMode() {
|
||
|
|
|
||
|
|
# Allow armbianmonitor to return back to armbian-config
|
||
|
|
trap "echo ; exit 0" 0 1 2 3 15
|
||
|
|
|
||
|
|
# Count interfaces - multiple routes causing interfaces to show up more than once, filtering...
|
||
|
|
ifacecount=$(route -n | grep -E UG | grep -Eo '[^ ]*$' | sort | uniq)
|
||
|
|
# If there are two ore more interfaces detected open a dynamic dialog box to select which to monitor
|
||
|
|
if [ "$(echo -e $ifacecount | tr ' ' '\n' | wc -l)" -gt 1 ]; then
|
||
|
|
ifacemenu=$(route -n | grep -E UG | grep -Eo '[^ ]*$' | sort | uniq | awk '{a[$1]=$1}END{for(i in a)printf i" "a[i]" "}')
|
||
|
|
ifacefunc() {
|
||
|
|
dialog --backtitle "Interface selector" \
|
||
|
|
--title "Multiple network interfaces detected" \
|
||
|
|
--menu "Choose which interface to monitor:" \
|
||
|
|
15 50 $(route -n | grep -E UG | grep -Eo '[^ ]*$' | sort | uniq | wc -l) \
|
||
|
|
$(echo $ifacemenu) 2>&1 >$(tty)
|
||
|
|
}
|
||
|
|
iface=$(ifacefunc)
|
||
|
|
else
|
||
|
|
# Use default behavior if one interface is found only
|
||
|
|
iface=$(route -n | grep -E UG | grep -Eo '[^ ]*$')
|
||
|
|
fi
|
||
|
|
timerStart
|
||
|
|
kickAllStatsDown
|
||
|
|
|
||
|
|
printf "\nruntime network statistics: %s\m" "$(uname -n)"
|
||
|
|
printf "network interface: %s\n" "$iface"
|
||
|
|
printf "[tap 'd' to display column headings]\n"
|
||
|
|
printf "[tap 'z' to reset counters]\n"
|
||
|
|
printf "[use <ctrl-c> to exit]\n"
|
||
|
|
printf "[bps: bits/s, Mbps: megabits/s, pps: packets/s, MB: megabytes]\n\n"
|
||
|
|
printf "%-11s %-66s %-66s\n" "$iface" "rx.stats____________________________________________________________" "tx.stats____________________________________________________________"
|
||
|
|
printf "%-11s %-11s %-11s \u01B0.%-11s %-11s \u01B0.%-11s \u01A9.%-11s %-11s %-11s \u01B0.%-11s %-11s \u01B0.%-11s \u01A9.%-11s\n\n" "count" "bps" "Mbps" "Mbps" "pps" "pps" "MB" "bps" "Mbps" "Mbps" "pps" "pps" "MB"
|
||
|
|
|
||
|
|
while true; do
|
||
|
|
nss=(`sed -n 's/'$iface':\s//p' /proc/net/dev`)
|
||
|
|
rxB=${nss[0]}
|
||
|
|
rxP=${nss[1]}
|
||
|
|
txB=${nss[8]}
|
||
|
|
txP=${nss[9]}
|
||
|
|
drxB=$(( rxB - prxB ))
|
||
|
|
drxb=$(( drxB* 8 ))
|
||
|
|
drxmb=$(echo "scale=2;$drxb/1000000"|bc)
|
||
|
|
drxP=$(( rxP - prxP ))
|
||
|
|
dtxB=$(( txB - ptxB ))
|
||
|
|
dtxb=$(( dtxB * 8 ))
|
||
|
|
dtxmb=$(echo "scale=2;$dtxb/1000000"|bc)
|
||
|
|
dtxP=$(( txP - ptxP ))
|
||
|
|
if [ "$cnt" != "0" ]; then
|
||
|
|
if [ "$c" == "N" ]; then
|
||
|
|
printf "\x1b[1A"
|
||
|
|
fi
|
||
|
|
srxb=$(( srxb + drxb ))
|
||
|
|
stxb=$(( stxb + dtxb ))
|
||
|
|
srxB=$(( srxB + drxB ))
|
||
|
|
stxB=$(( stxB + dtxB ))
|
||
|
|
srxP=$(( srxP + drxP ))
|
||
|
|
stxP=$(( stxP + dtxP ))
|
||
|
|
srxMB=$(echo "scale=2;$srxB/1024^2"|bc)
|
||
|
|
stxMB=$(echo "scale=2;$stxB/1024^2"|bc)
|
||
|
|
arxb=$(echo "scale=2;$srxb/$cnt"|bc)
|
||
|
|
atxb=$(echo "scale=2;$stxb/$cnt"|bc)
|
||
|
|
arxmb=$(echo "scale=2;$arxb/1000000"|bc)
|
||
|
|
atxmb=$(echo "scale=2;$atxb/1000000"|bc)
|
||
|
|
arxP=$(echo "scale=0;$srxP/$cnt"|bc)
|
||
|
|
atxP=$(echo "scale=0;$stxP/$cnt"|bc)
|
||
|
|
printf "%-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s %-11s\n" "$cnt" "$drxb" "$drxmb" "$arxmb" "$drxP" "$arxP" "$srxMB" "$dtxb" "$dtxmb" "$atxmb" "$dtxP" "$atxP" "$stxMB"
|
||
|
|
fi
|
||
|
|
prxB="$rxB"
|
||
|
|
prxP="$rxP"
|
||
|
|
ptxB="$txB"
|
||
|
|
ptxP="$txP"
|
||
|
|
let cnt++
|
||
|
|
timerShut
|
||
|
|
read -r -n1 -s -t$procSecs zeroAll
|
||
|
|
timerStart
|
||
|
|
if [ "$zeroAll" == 'z' ]; then
|
||
|
|
kickAllStatsDown
|
||
|
|
fi
|
||
|
|
if [ "$zeroAll" == 'd' ]; then
|
||
|
|
scrollingHeader
|
||
|
|
fi
|
||
|
|
done
|
||
|
|
}
|
||
|
|
|
||
|
|
scrollingHeader() {
|
||
|
|
printf "%-11s %-66s %-66s\n" "$iface" "rx.stats____________________________________________________________" "tx.stats____________________________________________________________"
|
||
|
|
printf "%-11s %-11s %-11s \u01B0.%-11s %-11s \u01B0.%-11s \u01A9.%-11s %-11s %-11s \u01B0.%-11s %-11s \u01B0.%-11s \u01A9.%-11s\n\n" "count" "bps" "Mbps" "Mbps" "pps" "pps" "MB" "bps" "Mbps" "Mbps" "pps" "pps" "MB"
|
||
|
|
}
|
||
|
|
|
||
|
|
timerStart() {
|
||
|
|
read -r st0 st1 < <(date +'%s %N')
|
||
|
|
}
|
||
|
|
timerShut() {
|
||
|
|
read -r sh0 sh1 < <(date +'%s %N')
|
||
|
|
jusquaQuand=$(echo "scale=2;($sh0-$st0)*1000000000+($sh1-$st1)"|bc)
|
||
|
|
procSecs=$(echo "scale=2;(1000000000-$jusquaQuand)/1000000000"|bc)
|
||
|
|
if [ "$rf1" == "debug" ]; then
|
||
|
|
printf "time controller adjustment: %d\n" "$procSecs"
|
||
|
|
if [ "$c" == "N" ]; then
|
||
|
|
printf "\x1b[1A"
|
||
|
|
fi
|
||
|
|
fi
|
||
|
|
}
|
||
|
|
kickAllStatsDown() {
|
||
|
|
prxB=0
|
||
|
|
prxP=0
|
||
|
|
ptxB=0
|
||
|
|
ptxP=0
|
||
|
|
srxb=0
|
||
|
|
stxb=0
|
||
|
|
srxB=0
|
||
|
|
stxB=0
|
||
|
|
srxMB=0
|
||
|
|
stxMB=0
|
||
|
|
srxP=0
|
||
|
|
stxP=0
|
||
|
|
cnt=0
|
||
|
|
}
|
||
|
|
|
||
|
|
Run7ZipBenchmark() {
|
||
|
|
echo -e "Preparing benchmark. Be patient please..."
|
||
|
|
# Do a quick 7-zip benchmark, check whether binary is there. If not install it
|
||
|
|
MyTool=$(which 7za || which 7zr)
|
||
|
|
[ -z "${MyTool}" ] && apt-get -f -qq -y install p7zip && MyTool=/usr/bin/7zr
|
||
|
|
[ -z "${MyTool}" ] && (echo "No 7-zip binary found and could not be installed. Aborting" >&2 ; exit 1)
|
||
|
|
# Send CLI monitoring to the background to be able to spot throttling and other problems
|
||
|
|
MonitoringOutput="$(mktemp /tmp/${0##*/}.XXXXXX)"
|
||
|
|
trap "rm \"${MonitoringOutput}\" ; exit 0" 0 1 2 3 15
|
||
|
|
armbianmonitor -m >${MonitoringOutput} &
|
||
|
|
MonitoringPID=$!
|
||
|
|
# run 7-zip benchmarks after waiting 10 seconds to spot whether the system was idle before.
|
||
|
|
# We run the benchmark a single time by default unless otherwise specified on the command line
|
||
|
|
RunHowManyTimes=${runs:-1}
|
||
|
|
sleep 10
|
||
|
|
for ((i=1;i<=RunHowManyTimes;i++)); do
|
||
|
|
"${MyTool}" b
|
||
|
|
done
|
||
|
|
# report CLI monitoring results as well
|
||
|
|
kill ${MonitoringPID}
|
||
|
|
echo -e "\nMonitoring output recorded while running the benchmark:\n"
|
||
|
|
sed -e '/^\s*$/d' -e '/^Stop/d' <${MonitoringOutput}
|
||
|
|
echo -e "\n"
|
||
|
|
} # Run7ZipBenchmark
|
||
|
|
|
||
|
|
Main "$@"
|