451 lines
9.5 KiB
Diff
451 lines
9.5 KiB
Diff
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
|
||
|
new file mode 100644
|
||
|
index 000000000..2ee07d15a
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
|
||
|
@@ -0,0 +1,444 @@
|
||
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+
|
||
|
+#include <dt-bindings/input/input.h>
|
||
|
+#include <dt-bindings/gpio/gpio.h>
|
||
|
+#include "rk3328-dram-default-timing.dtsi"
|
||
|
+#include "rk3328.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Xunlong Orange Pi R1 Plus";
|
||
|
+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
|
||
|
+
|
||
|
+ aliases {
|
||
|
+ ethernet1 = &rtl8153;
|
||
|
+ mmc0 = &sdmmc;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen {
|
||
|
+ stdout-path = "serial2:1500000n8";
|
||
|
+ };
|
||
|
+
|
||
|
+ gmac_clk: gmac-clock {
|
||
|
+ compatible = "fixed-clock";
|
||
|
+ clock-frequency = <125000000>;
|
||
|
+ clock-output-names = "gmac_clkin";
|
||
|
+ #clock-cells = <0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+
|
||
|
+ lan_led: led-0 {
|
||
|
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||
|
+ label = "orangepi-r1-plus:green:lan";
|
||
|
+ };
|
||
|
+
|
||
|
+ sys_led: led-1 {
|
||
|
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||
|
+ label = "orangepi-r1-plus:red:status";
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ };
|
||
|
+
|
||
|
+ wan_led: led-2 {
|
||
|
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||
|
+ label = "orangepi-r1-plus:green:wan";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_sd: sdmmc-regulator {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||
|
+ pinctrl-0 = <&sdmmc0m1_pin>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ regulator-name = "vcc_sd";
|
||
|
+ regulator-boot-on;
|
||
|
+ vin-supply = <&vcc_io_33>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_5v: vdd-5v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vdd_5v";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_5v_lan: vdd-5v-lan {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-0 = <&lan_vdd_pin>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ regulator-name = "vdd_5v_lan";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ vin-supply = <&vdd_5v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ dfi: dfi@ff790000 {
|
||
|
+ reg = <0x00 0xff790000 0x00 0x400>;
|
||
|
+ compatible = "rockchip,rk3328-dfi";
|
||
|
+ rockchip,grf = <&grf>;
|
||
|
+ };
|
||
|
+
|
||
|
+ dmc: dmc {
|
||
|
+ compatible = "rockchip,rk3328-dmc";
|
||
|
+ devfreq-events = <&dfi>;
|
||
|
+ center-supply = <&vdd_log>;
|
||
|
+ clocks = <&cru SCLK_DDRCLK>;
|
||
|
+ clock-names = "dmc_clk";
|
||
|
+ operating-points-v2 = <&dmc_opp_table>;
|
||
|
+ ddr_timing = <&ddr_timing>;
|
||
|
+ upthreshold = <40>;
|
||
|
+ downdifferential = <20>;
|
||
|
+ auto-min-freq = <786000>;
|
||
|
+ auto-freq-en = <0>;
|
||
|
+ #cooling-cells = <2>;
|
||
|
+
|
||
|
+ ddr_power_model: ddr_power_model {
|
||
|
+ compatible = "ddr_power_model";
|
||
|
+ dynamic-power-coefficient = <120>;
|
||
|
+ static-power-coefficient = <200>;
|
||
|
+ ts = <32000 4700 (-80) 2>;
|
||
|
+ thermal-zone = "soc-thermal";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ dmc_opp_table: dmc-opp-table {
|
||
|
+ compatible = "operating-points-v2";
|
||
|
+
|
||
|
+ rockchip,leakage-voltage-sel = <
|
||
|
+ 1 10 0
|
||
|
+ 11 254 1
|
||
|
+ >;
|
||
|
+ nvmem-cells = <&logic_leakage>;
|
||
|
+ nvmem-cell-names = "ddr_leakage";
|
||
|
+
|
||
|
+ opp-786000000 {
|
||
|
+ opp-hz = /bits/ 64 <786000000>;
|
||
|
+ opp-microvolt = <1075000>;
|
||
|
+ opp-microvolt-L0 = <1075000>;
|
||
|
+ opp-microvolt-L1 = <1050000>;
|
||
|
+ };
|
||
|
+ opp-798000000 {
|
||
|
+ opp-hz = /bits/ 64 <798000000>;
|
||
|
+ opp-microvolt = <1075000>;
|
||
|
+ opp-microvolt-L0 = <1075000>;
|
||
|
+ opp-microvolt-L1 = <1050000>;
|
||
|
+ };
|
||
|
+ opp-840000000 {
|
||
|
+ opp-hz = /bits/ 64 <840000000>;
|
||
|
+ opp-microvolt = <1075000>;
|
||
|
+ opp-microvolt-L0 = <1075000>;
|
||
|
+ opp-microvolt-L1 = <1050000>;
|
||
|
+ };
|
||
|
+ opp-924000000 {
|
||
|
+ opp-hz = /bits/ 64 <924000000>;
|
||
|
+ opp-microvolt = <1100000>;
|
||
|
+ opp-microvolt-L0 = <1100000>;
|
||
|
+ opp-microvolt-L1 = <1075000>;
|
||
|
+ };
|
||
|
+ opp-1056000000 {
|
||
|
+ opp-hz = /bits/ 64 <1056000000>;
|
||
|
+ opp-microvolt = <1175000>;
|
||
|
+ opp-microvolt-L0 = <1175000>;
|
||
|
+ opp-microvolt-L1 = <1150000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&cpu0 {
|
||
|
+ cpu-supply = <&vdd_arm>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu1 {
|
||
|
+ cpu-supply = <&vdd_arm>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu2 {
|
||
|
+ cpu-supply = <&vdd_arm>;
|
||
|
+};
|
||
|
+
|
||
|
+&cpu3 {
|
||
|
+ cpu-supply = <&vdd_arm>;
|
||
|
+};
|
||
|
+
|
||
|
+&display_subsystem {
|
||
|
+ status = "disabled";
|
||
|
+};
|
||
|
+
|
||
|
+&gmac2io {
|
||
|
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
||
|
+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
|
||
|
+ clock_in_out = "input";
|
||
|
+ phy-handle = <&rtl8211e>;
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ phy-supply = <&vcc_io_33>;
|
||
|
+ pinctrl-0 = <&rgmiim1_pins>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ snps,aal;
|
||
|
+ rx_delay = <0x18>;
|
||
|
+ tx_delay = <0x24>;
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ mdio {
|
||
|
+ compatible = "snps,dwmac-mdio";
|
||
|
+ #address-cells = <1>;
|
||
|
+ #size-cells = <0>;
|
||
|
+
|
||
|
+ rtl8211e: ethernet-phy@1 {
|
||
|
+ reg = <1>;
|
||
|
+ pinctrl-0 = <ð_phy_reset_pin>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ reset-assert-us = <10000>;
|
||
|
+ reset-deassert-us = <50000>;
|
||
|
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c0 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2c1 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ rk805: pmic@18 {
|
||
|
+ compatible = "rockchip,rk805";
|
||
|
+ reg = <0x18>;
|
||
|
+ interrupt-parent = <&gpio1>;
|
||
|
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
||
|
+ #clock-cells = <1>;
|
||
|
+ clock-output-names = "xin32k", "rk805-clkout2";
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+ pinctrl-0 = <&pmic_int_l>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ rockchip,system-power-controller;
|
||
|
+ wakeup-source;
|
||
|
+
|
||
|
+ vcc1-supply = <&vdd_5v>;
|
||
|
+ vcc2-supply = <&vdd_5v>;
|
||
|
+ vcc3-supply = <&vdd_5v>;
|
||
|
+ vcc4-supply = <&vdd_5v>;
|
||
|
+ vcc5-supply = <&vcc_io_33>;
|
||
|
+ vcc6-supply = <&vdd_5v>;
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ vdd_log: DCDC_REG1 {
|
||
|
+ regulator-name = "vdd_log";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-init-microvolt = <1075000>;
|
||
|
+ regulator-min-microvolt = <712500>;
|
||
|
+ regulator-max-microvolt = <1450000>;
|
||
|
+ regulator-ramp-delay = <12500>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1000000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_arm: DCDC_REG2 {
|
||
|
+ regulator-name = "vdd_arm";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-init-microvolt = <1225000>;
|
||
|
+ regulator-min-microvolt = <712500>;
|
||
|
+ regulator-max-microvolt = <1450000>;
|
||
|
+ regulator-ramp-delay = <12500>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <950000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_ddr: DCDC_REG3 {
|
||
|
+ regulator-name = "vcc_ddr";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_io_33: DCDC_REG4 {
|
||
|
+ regulator-name = "vcc_io_33";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_18: LDO_REG1 {
|
||
|
+ regulator-name = "vcc_18";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc18_emmc: LDO_REG2 {
|
||
|
+ regulator-name = "vcc18_emmc";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_10: LDO_REG3 {
|
||
|
+ regulator-name = "vdd_10";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1000000>;
|
||
|
+ regulator-max-microvolt = <1000000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1000000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&io_domains {
|
||
|
+ pmuio-supply = <&vcc_io_33>;
|
||
|
+ vccio1-supply = <&vcc_io_33>;
|
||
|
+ vccio2-supply = <&vcc18_emmc>;
|
||
|
+ vccio3-supply = <&vcc_io_33>;
|
||
|
+ vccio4-supply = <&vcc_io_33>;
|
||
|
+ vccio5-supply = <&vcc_io_33>;
|
||
|
+ vccio6-supply = <&vcc_io_33>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pinctrl {
|
||
|
+ gmac2io {
|
||
|
+ eth_phy_reset_pin: eth-phy-reset-pin {
|
||
|
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ lan_led_pin: lan-led-pin {
|
||
|
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ sys_led_pin: sys-led-pin {
|
||
|
+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ wan_led_pin: wan-led-pin {
|
||
|
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ lan {
|
||
|
+ lan_vdd_pin: lan-vdd-pin {
|
||
|
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pmic {
|
||
|
+ pmic_int_l: pmic-int-l {
|
||
|
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pwm2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&sdmmc {
|
||
|
+ bus-width = <4>;
|
||
|
+ cap-sd-highspeed;
|
||
|
+ disable-wp;
|
||
|
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ vmmc-supply = <&vcc_sd>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&spi0 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ flash@0 {
|
||
|
+ compatible = "jedec,spi-nor";
|
||
|
+ reg = <0>;
|
||
|
+ spi-max-frequency = <50000000>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&tsadc {
|
||
|
+ rockchip,hw-tshut-mode = <0>;
|
||
|
+ rockchip,hw-tshut-polarity = <0>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy_host {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy_otg {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb20_otg {
|
||
|
+ status = "okay";
|
||
|
+ dr_mode = "host";
|
||
|
+};
|
||
|
+
|
||
|
+&usbdrd3 {
|
||
|
+ dr_mode = "host";
|
||
|
+ status = "okay";
|
||
|
+ #address-cells = <1>;
|
||
|
+ #size-cells = <0>;
|
||
|
+
|
||
|
+ rtl8153: device@2 {
|
||
|
+ compatible = "usbbda,8153";
|
||
|
+ reg = <2>;
|
||
|
+ realtek,led-data = <0x87>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ehci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ohci {
|
||
|
+ status = "okay";
|
||
|
+};
|