799 lines
17 KiB
Diff
799 lines
17 KiB
Diff
|
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
|
||
|
index 479906f3ad7b..bf2a58e3a871 100644
|
||
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||
|
@@ -58,3 +58,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
|
||
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3-a.dtb
|
||
|
|
||
|
subdir-y := $(dts-dirs) overlay
|
||
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
|
||
|
new file mode 100644
|
||
|
index 000000000000..1b898aff9df8
|
||
|
--- /dev/null
|
||
|
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
|
||
|
@@ -0,0 +1,781 @@
|
||
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
+/*
|
||
|
+ * Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||
|
+ *
|
||
|
+ */
|
||
|
+
|
||
|
+/dts-v1/;
|
||
|
+
|
||
|
+#include <dt-bindings/gpio/gpio.h>
|
||
|
+#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
+#include <dt-bindings/soc/rockchip,vop2.h>
|
||
|
+#include "rk3568.dtsi"
|
||
|
+
|
||
|
+/ {
|
||
|
+ model = "Radxa Rock3A";
|
||
|
+ compatible = "radxa,rk3568-rock-3a", "rockchip,rk3568";
|
||
|
+
|
||
|
+ aliases {
|
||
|
+ ethernet1 = &gmac1;
|
||
|
+ mmc0 = &sdmmc0;
|
||
|
+ mmc1 = &sdhci;
|
||
|
+ };
|
||
|
+
|
||
|
+ chosen: chosen {
|
||
|
+ stdout-path = "serial2:1500000n8";
|
||
|
+ };
|
||
|
+
|
||
|
+ gmac1_clkin: external-gmac1-clock {
|
||
|
+ compatible = "fixed-clock";
|
||
|
+ clock-frequency = <125000000>;
|
||
|
+ clock-output-names = "gmac1_clkin";
|
||
|
+ #clock-cells = <0>;
|
||
|
+ };
|
||
|
+
|
||
|
+ hdmi-con {
|
||
|
+ compatible = "hdmi-connector";
|
||
|
+ type = "c";
|
||
|
+
|
||
|
+ port {
|
||
|
+ hdmi_con_in: endpoint {
|
||
|
+ remote-endpoint = <&hdmi_out_con>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ leds {
|
||
|
+ compatible = "gpio-leds";
|
||
|
+
|
||
|
+ led-user {
|
||
|
+ label = "user-led";
|
||
|
+ default-state = "on";
|
||
|
+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||
|
+ linux,default-trigger = "heartbeat";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&user_led_enable_h>;
|
||
|
+ retain-state-suspended;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ rk809-sound {
|
||
|
+ compatible = "simple-audio-card";
|
||
|
+ simple-audio-card,format = "i2s";
|
||
|
+ simple-audio-card,name = "Analog RK809";
|
||
|
+ simple-audio-card,mclk-fs = <256>;
|
||
|
+
|
||
|
+ simple-audio-card,cpu {
|
||
|
+ sound-dai = <&i2s1_8ch>;
|
||
|
+ };
|
||
|
+ simple-audio-card,codec {
|
||
|
+ sound-dai = <&rk809>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ rk_headset: rk-headset {
|
||
|
+ compatible = "rockchip_headset";
|
||
|
+ headset_gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&hp_det>;
|
||
|
+ io-channels = <&saradc 2>; //HP_HOOK pin
|
||
|
+ };
|
||
|
+
|
||
|
+ sdio_pwrseq: sdio-pwrseq {
|
||
|
+ status = "okay";
|
||
|
+ compatible = "mmc-pwrseq-simple";
|
||
|
+ clocks = <&rk809 1>;
|
||
|
+ clock-names = "ext_clock";
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&wifi_enable_h>;
|
||
|
+ reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
|
||
|
+ };
|
||
|
+
|
||
|
+ dc_12v: dc-12v {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "dc_12v";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <12000000>;
|
||
|
+ regulator-max-microvolt = <12000000>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_sys: vcc3v3-sys {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc3v3_sys";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ vin-supply = <&dc_12v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_sys: vcc5v0-sys {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_sys";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <5000000>;
|
||
|
+ regulator-max-microvolt = <5000000>;
|
||
|
+ vin-supply = <&dc_12v>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_host: vcc5v0-host {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_host";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&vcc5v0_host_en>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_otg: vcc5v0-otg {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_otg";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&vcc5v0_otg_en>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc5v0_hub: vcc5v0-hub {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc5v0_hub";
|
||
|
+ enable-active-high;
|
||
|
+ gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&vcc5v0_hub_en>;
|
||
|
+ regulator-always-on;
|
||
|
+ };
|
||
|
+
|
||
|
+ pcie30_avdd0v9: pcie30-avdd0v9 {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "pcie30_avdd0v9";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+ vin-supply = <&vcc3v3_sys>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pcie30_avdd1v8: pcie30-avdd1v8 {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "pcie30_avdd1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+ vin-supply = <&vcc3v3_sys>;
|
||
|
+ };
|
||
|
+
|
||
|
+ pcie30_3v3: gpio-regulator {
|
||
|
+ compatible = "regulator-gpio";
|
||
|
+ regulator-name = "pcie30_3v3";
|
||
|
+ regulator-min-microvolt = <100000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||
|
+ gpios-states = <0x1>;
|
||
|
+ states = <100000 0x0
|
||
|
+ 3300000 0x1>;
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_lcd0_n: vcc3v3-lcd0-n {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc3v3_lcd0_n";
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_lcd1_n: vcc3v3-lcd1-n {
|
||
|
+ compatible = "regulator-fixed";
|
||
|
+ regulator-name = "vcc3v3_lcd1_n";
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&combphy0 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&combphy1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&combphy2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gmac1 {
|
||
|
+ phy-mode = "rgmii";
|
||
|
+ clock_in_out = "input";
|
||
|
+
|
||
|
+ snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
|
||
|
+ snps,reset-active-low;
|
||
|
+ /* Reset time is 20ms, 100ms for rtl8211f */
|
||
|
+ snps,reset-delays-us = <0 20000 100000>;
|
||
|
+
|
||
|
+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||
|
+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
|
||
|
+
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&gmac1m1_miim
|
||
|
+ &gmac1m1_tx_bus2
|
||
|
+ &gmac1m1_rx_bus2
|
||
|
+ &gmac1m1_rgmii_clk
|
||
|
+ &gmac1m1_rgmii_bus
|
||
|
+ &gmac1m1_clkinout>;
|
||
|
+
|
||
|
+ tx_delay = <0x4f>;
|
||
|
+ rx_delay = <0x26>;
|
||
|
+
|
||
|
+ phy-handle = <&rgmii_phy1>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi {
|
||
|
+ avdd-0v9-supply = <&vdda0v9_image>;
|
||
|
+ avdd-1v8-supply = <&vcca1v8_image>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_in {
|
||
|
+ hdmi_in_vp0: endpoint@0 {
|
||
|
+ reg = <0>;
|
||
|
+ remote-endpoint = <&vp0_out_hdmi>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_out {
|
||
|
+ hdmi_out_con: endpoint {
|
||
|
+ remote-endpoint = <&hdmi_con_in>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2c0 {
|
||
|
+ status = "okay";
|
||
|
+
|
||
|
+ vdd_cpu: regulator@1c {
|
||
|
+ compatible = "tcs,tcs4525";
|
||
|
+ reg = <0x1c>;
|
||
|
+ fcs,suspend-voltage-selector = <1>;
|
||
|
+ regulator-compatible = "fan53555-reg";
|
||
|
+ regulator-name = "vdd_cpu";
|
||
|
+ regulator-min-microvolt = <800000>;
|
||
|
+ regulator-max-microvolt = <1150000>;
|
||
|
+ regulator-ramp-delay = <2300>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ vin-supply = <&vcc5v0_sys>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ rk809: pmic@20 {
|
||
|
+ compatible = "rockchip,rk809";
|
||
|
+ reg = <0x20>;
|
||
|
+ interrupt-parent = <&gpio0>;
|
||
|
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
+ assigned-clocks = <&cru I2S1_MCLKOUT>, <&cru I2S1_MCLK_TX_IOE>;
|
||
|
+ assigned-clock-rates = <12288000>;
|
||
|
+ assigned-clock-parents = <&cru I2S1_MCLKOUT_TX>, <&cru I2S1_MCLKOUT_TX>;
|
||
|
+ #clock-cells = <1>;
|
||
|
+ clock-names = "mclk";
|
||
|
+ clocks = <&cru I2S1_MCLKOUT>;
|
||
|
+ pinctrl-names = "default", "pmic-sleep",
|
||
|
+ "pmic-power-off", "pmic-reset";
|
||
|
+ pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||
|
+ pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
|
||
|
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
|
||
|
+ pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
|
||
|
+
|
||
|
+ rockchip,system-power-controller;
|
||
|
+ #sound-dai-cells = <0>;
|
||
|
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||
|
+ //fb-inner-reg-idxs = <2>;
|
||
|
+ /* 1: rst regs (default in codes), 0: rst the pmic */
|
||
|
+ pmic-reset-func = <0>;
|
||
|
+ /* not save the PMIC_POWER_EN register in uboot */
|
||
|
+ not-save-power-en = <1>;
|
||
|
+
|
||
|
+ vcc1-supply = <&vcc3v3_sys>;
|
||
|
+ vcc2-supply = <&vcc3v3_sys>;
|
||
|
+ vcc3-supply = <&vcc3v3_sys>;
|
||
|
+ vcc4-supply = <&vcc3v3_sys>;
|
||
|
+ vcc5-supply = <&vcc3v3_sys>;
|
||
|
+ vcc6-supply = <&vcc3v3_sys>;
|
||
|
+ vcc7-supply = <&vcc3v3_sys>;
|
||
|
+ vcc8-supply = <&vcc3v3_sys>;
|
||
|
+ vcc9-supply = <&vcc3v3_sys>;
|
||
|
+ wakeup-source;
|
||
|
+
|
||
|
+ pwrkey {
|
||
|
+ status = "okay";
|
||
|
+ };
|
||
|
+
|
||
|
+ pinctrl_rk8xx: pinctrl_rk8xx {
|
||
|
+ gpio-controller;
|
||
|
+ #gpio-cells = <2>;
|
||
|
+
|
||
|
+ rk817_slppin_null: rk817_slppin_null {
|
||
|
+ pins = "gpio_slp";
|
||
|
+ function = "pin_fun0";
|
||
|
+ };
|
||
|
+
|
||
|
+ rk817_slppin_slp: rk817_slppin_slp {
|
||
|
+ pins = "gpio_slp";
|
||
|
+ function = "pin_fun1";
|
||
|
+ };
|
||
|
+
|
||
|
+ rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||
|
+ pins = "gpio_slp";
|
||
|
+ function = "pin_fun2";
|
||
|
+ };
|
||
|
+
|
||
|
+ rk817_slppin_rst: rk817_slppin_rst {
|
||
|
+ pins = "gpio_slp";
|
||
|
+ function = "pin_fun3";
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ regulators {
|
||
|
+ vdd_logic: DCDC_REG1 {
|
||
|
+ regulator-name = "vdd_logic";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_gpu: DCDC_REG2 {
|
||
|
+ regulator-name = "vdd_gpu";
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_ddr: DCDC_REG3 {
|
||
|
+ regulator-name = "vcc_ddr";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdd_npu: DCDC_REG4 {
|
||
|
+ regulator-name = "vdd_npu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-init-microvolt = <900000>;
|
||
|
+ regulator-initial-mode = <0x2>;
|
||
|
+ regulator-min-microvolt = <500000>;
|
||
|
+ regulator-max-microvolt = <1350000>;
|
||
|
+ regulator-ramp-delay = <6001>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_1v8: DCDC_REG5 {
|
||
|
+ regulator-name = "vcc_1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda0v9_image: LDO_REG1 {
|
||
|
+ regulator-name = "vdda0v9_image";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda_0v9: LDO_REG2 {
|
||
|
+ regulator-name = "vdda_0v9";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vdda0v9_pmu: LDO_REG3 {
|
||
|
+ regulator-name = "vdda0v9_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <900000>;
|
||
|
+ regulator-max-microvolt = <900000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <900000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vccio_acodec: LDO_REG4 {
|
||
|
+ regulator-name = "vccio_acodec";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vccio_sd: LDO_REG5 {
|
||
|
+ regulator-name = "vccio_sd";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_pmu: LDO_REG6 {
|
||
|
+ regulator-name = "vcc3v3_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <3300000>;
|
||
|
+ regulator-max-microvolt = <3300000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <3300000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca_1v8: LDO_REG7 {
|
||
|
+ regulator-name = "vcca_1v8";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca1v8_pmu: LDO_REG8 {
|
||
|
+ regulator-name = "vcca1v8_pmu";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-on-in-suspend;
|
||
|
+ regulator-suspend-microvolt = <1800000>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcca1v8_image: LDO_REG9 {
|
||
|
+ regulator-name = "vcca1v8_image";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+ regulator-min-microvolt = <1800000>;
|
||
|
+ regulator-max-microvolt = <1800000>;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc_3v3: SWITCH_REG1 {
|
||
|
+ regulator-name = "vcc_3v3";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ vcc3v3_sd: SWITCH_REG2 {
|
||
|
+ regulator-name = "vcc3v3_sd";
|
||
|
+ regulator-always-on;
|
||
|
+ regulator-boot-on;
|
||
|
+
|
||
|
+ regulator-state-mem {
|
||
|
+ regulator-off-in-suspend;
|
||
|
+ };
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ codec {
|
||
|
+ mic-in-differential;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&mdio1 {
|
||
|
+ rgmii_phy1: phy@0 {
|
||
|
+ compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
+ reg = <0x0>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&pinctrl {
|
||
|
+ leds {
|
||
|
+ user_led_enable_h: user-led-enable-h {
|
||
|
+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ sdio-pwrseq {
|
||
|
+ wifi_enable_h: wifi-enable-h {
|
||
|
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ usb {
|
||
|
+ vcc5v0_host_en: vcc5v0-host-en {
|
||
|
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ vcc5v0_otg_en: vcc5v0-otg-en {
|
||
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ vcc5v0_hub_en: vcc5v0-hub-en {
|
||
|
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ pmic {
|
||
|
+ pmic_int: pmic_int {
|
||
|
+ rockchip,pins =
|
||
|
+ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
+ };
|
||
|
+
|
||
|
+ soc_slppin_gpio: soc_slppin_gpio {
|
||
|
+ rockchip,pins =
|
||
|
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>;
|
||
|
+ };
|
||
|
+
|
||
|
+ soc_slppin_slp: soc_slppin_slp {
|
||
|
+ rockchip,pins =
|
||
|
+ <0 RK_PA2 1 &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+
|
||
|
+ soc_slppin_rst: soc_slppin_rst {
|
||
|
+ rockchip,pins =
|
||
|
+ <0 RK_PA2 2 &pcfg_pull_none>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+
|
||
|
+ headphone {
|
||
|
+ hp_det: hp-det {
|
||
|
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
+ };
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&i2s0_8ch {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&i2s1_8ch {
|
||
|
+ rockchip,trcm-sync-tx-only;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pmu_io_domains {
|
||
|
+ pmuio1-supply = <&vcc3v3_pmu>;
|
||
|
+ pmuio2-supply = <&vcc3v3_pmu>;
|
||
|
+ vccio1-supply = <&vccio_acodec>;
|
||
|
+ vccio3-supply = <&vccio_sd>;
|
||
|
+ vccio4-supply = <&vcc_1v8>;
|
||
|
+ vccio5-supply = <&vcc_3v3>;
|
||
|
+ vccio6-supply = <&vcc_1v8>;
|
||
|
+ vccio7-supply = <&vcc_3v3>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&saradc {
|
||
|
+ vref-supply = <&vcca_1v8>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&sdhci {
|
||
|
+ bus-width = <8>;
|
||
|
+ max-frequency = <200000000>;
|
||
|
+ non-removable;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&sdmmc0 {
|
||
|
+ bus-width = <4>;
|
||
|
+ cap-sd-highspeed;
|
||
|
+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||
|
+ disable-wp;
|
||
|
+ pinctrl-names = "default";
|
||
|
+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||
|
+ sd-uhs-sdr104;
|
||
|
+ vmmc-supply = <&vcc3v3_sd>;
|
||
|
+ vqmmc-supply = <&vccio_sd>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&tsadc {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&uart2 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&vop {
|
||
|
+ status = "okay";
|
||
|
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||
|
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||
|
+};
|
||
|
+
|
||
|
+&vop_mmu {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&vp0 {
|
||
|
+ vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI {
|
||
|
+ reg = <RK3568_VOP2_EP_HDMI>;
|
||
|
+ remote-endpoint = <&hdmi_in_vp0>;
|
||
|
+ };
|
||
|
+};
|
||
|
+
|
||
|
+&hdmi_sound {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&gpu {
|
||
|
+ mali-supply = <&vdd_gpu>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy0_host {
|
||
|
+ phy-supply = <&vcc5v0_host>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy0_otg {
|
||
|
+ vbus-supply = <&vcc5v0_otg>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy1_host {
|
||
|
+ phy-supply = <&vcc5v0_host>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy1_otg {
|
||
|
+ phy-supply = <&vcc5v0_host>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy0 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&u2phy1 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbdrd_dwc3 {
|
||
|
+ status = "okay";
|
||
|
+ extcon = <&u2phy0>;
|
||
|
+};
|
||
|
+
|
||
|
+&usbdrd30 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbhost_dwc3 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usbhost30 {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ehci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host0_ohci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host1_ehci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&usb_host1_ohci {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie30phy {
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie3x2 {
|
||
|
+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||
|
+ vpcie3v3-supply = <&pcie30_3v3>;
|
||
|
+ //num-lanes = <2>;
|
||
|
+ pinctrl-0 = <&pcie30x2m1_pins>;
|
||
|
+ bus-scan-delay-ms = <1000>;
|
||
|
+ status = "okay";
|
||
|
+};
|
||
|
+
|
||
|
+&pcie2x1 {
|
||
|
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||
|
+ vpcie3v3-supply = <&pcie30_3v3>;
|
||
|
+ pinctrl-0 = <&pcie20m1_pins>;
|
||
|
+ bus-scan-delay-ms = <1000>;
|
||
|
+ status = "okay";
|
||
|
+};
|