build/patch/kernel/archive/rockchip64-6.1/board-rockpis-0001-arm64-dts.patch

378 lines
8.1 KiB
Diff
Raw Permalink Normal View History

--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts 2022-12-19 16:47:52.770160260 -0800
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts 2022-12-19 17:53:42.503756590 -0800
@@ -2,6 +2,7 @@
/*
* Copyright (c) 2019 Akash Gajjar <akash@openedev.com>
* Copyright (c) 2019 Jagan Teki <jagan@openedev.com>
+ * Revised: 2022 Brent Roman <brent@mbari.org>
*/
/dts-v1/;
@@ -11,12 +12,6 @@
model = "Radxa ROCK Pi S";
compatible = "radxa,rockpis", "rockchip,rk3308";
- aliases {
- ethernet0 = &gmac;
- mmc0 = &emmc;
- mmc1 = &sdmmc;
- };
-
chosen {
stdout-path = "serial0:1500000n8";
};
@@ -27,44 +22,102 @@
pinctrl-0 = <&green_led_gio>, <&heartbeat_led_gpio>;
green-led {
- default-state = "on";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
label = "rockpis:green:power";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
+ default-state = "on";
};
blue-led {
- default-state = "on";
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
label = "rockpis:blue:user";
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
+ default-state = "on";
};
};
+ codec: acodec-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,rk3308-acodec";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,codec-hp-det;
+ simple-audio-card,widgets =
+ "Headphone", "Headphones";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s_8ch_2>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&acodec>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "i2s_8ch_0";
+
+ simple-audio-card,dai-link@1 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&i2s_8ch_0>;
+ };
+
+ codec {
+ sound-dai = <&pcm5102a>;
+ };
+ };
+ };
+
+ pcm5102a: pcm5102a {
+ #sound-dai-cells = <0>;
+ compatible = "ti,pcm5102a";
+ pcm510x,format = "i2s";
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-0 = <&wifi_enable_h>;
pinctrl-names = "default";
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
};
- vcc_1v8: vcc-1v8 {
+ vcc5v0_sys: vcc5v0-sys {
compatible = "regulator-fixed";
- regulator-name = "vcc_1v8";
+ regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_io>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
- vcc_io: vcc-io {
+ vdd_core: vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-init-microvolt = <1015000>;
+ regulator-settling-time-up-us = <250>;
+ regulator-always-on;
+ regulator-boot-on;
+ pwm-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_log: vdd-log {
compatible = "regulator-fixed";
- regulator-name = "vcc_io";
+ regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
vin-supply = <&vcc5v0_sys>;
};
@@ -78,50 +131,50 @@
vin-supply = <&vcc5v0_sys>;
};
- vcc5v0_otg: vcc5v0-otg {
+ vcc_1v8: vcc-1v8 {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc5v0_otg";
+ regulator-name = "vcc_1v8";
regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc_io: vcc-io {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ regulator-name = "vcc_io";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
};
- vdd_core: vdd-core {
- compatible = "pwm-regulator";
- pwms = <&pwm0 0 5000 1>;
- pwm-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_core";
- regulator-min-microvolt = <827000>;
- regulator-max-microvolt = <1340000>;
- regulator-init-microvolt = <1015000>;
- regulator-settling-time-up-us = <250>;
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
regulator-always-on;
regulator-boot-on;
};
- vdd_log: vdd-log {
+ vcc5v0_otg: vcc5v0-otg {
compatible = "regulator-fixed";
- regulator-name = "vdd_log";
+ regulator-name = "vcc5v0_otg";
regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
vin-supply = <&vcc5v0_sys>;
};
};
+&acodec {
+ status = "okay";
+ #sound-dai-cells = <0>;
+};
+
&cpu0 {
cpu-supply = <&vdd_core>;
};
@@ -129,23 +182,60 @@
&emmc {
bus-width = <4>;
cap-mmc-highspeed;
- mmc-hs200-1_8v;
non-removable;
- vmmc-supply = <&vcc_io>;
status = "okay";
};
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ card-detect-delay = <800>;
+ status = "okay";
+};
+
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ no-mmc;
+ status = "okay";
+
+ rtl8723ds: wifi@1 {
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake>;
+ };
+};
+
&gmac {
+ phy-supply = <&vcc_phy>;
clock_in_out = "output";
- phy-supply = <&vcc_io>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&cru SCLK_MAC_SRC>;
snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <0 50000 50000>;
status = "okay";
};
-&i2c1 {
+&i2s_8ch_0 {
+ assigned-clocks = <&cru SCLK_I2S0_8CH_RX>;
+ assigned-clock-parents = <&cru SCLK_I2S0_8CH_TX_MUX>;
+ rockchip,clk-trcm = <1>;
+ #sound-dai-cells = <0>;
+};
+
+&i2s_8ch_2 {
status = "okay";
+ #sound-dai-cells = <0>;
};
&pinctrl {
@@ -172,7 +262,9 @@
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ };
+ wifi {
wifi_host_wake: wifi-host-wake {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
};
@@ -189,42 +281,29 @@
status = "okay";
};
-&sdio {
- #address-cells = <1>;
- #size-cells = <0>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- max-frequency = <1000000>;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- sd-uhs-sdr104;
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* 0:CRU */
+ rockchip,hw-tshut-polarity = <1>; /* 1:HIGH */
status = "okay";
};
-&sdmmc {
- cap-sd-highspeed;
+&i2c1 {
status = "okay";
};
-&u2phy {
- status = "okay";
-
- u2phy_host: host-port {
- phy-supply = <&vcc5v0_otg>;
- status = "okay";
- };
-
- u2phy_otg: otg-port {
- phy-supply = <&vcc5v0_otg>;
- status = "okay";
- };
+&spi2 {
+// status = "okay"; //conflicts with UART2
+ max-freq = <10000000>;
};
&uart0 {
status = "okay";
};
+&uart2 {
+ status = "okay";
+};
+
&uart4 {
status = "okay";
@@ -235,19 +314,27 @@
};
};
-&usb_host_ehci {
+&u2phy {
status = "okay";
+
+ u2phy_host: host-port {
+ phy-supply = <&vcc5v0_otg>;
+ status = "okay";
+ };
+
+ u2phy_otg: otg-port {
+ status = "okay";
+ };
};
-&usb_host_ohci {
+&usb20_otg {
status = "okay";
};
-&usb20_otg {
- dr_mode = "peripheral";
+&usb_host_ehci {
status = "okay";
};
-&wdt {
+&usb_host_ohci{
status = "okay";
};