aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
build/patch/u-boot/u-boot-rockchip64-v2022.04/add-board-helios64.patch

2225 lines
49 KiB
Diff
Raw Permalink Normal View History

添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
2023-09-19 11:24:52 +08:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Aditya Prayoga <aditya@kobol.io>
Date: Tue, 15 Sep 2020 18:41:54 +0700
Subject: Patching something
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi | 136 ++
arch/arm/dts/rk3399-kobol-helios64.dts | 1149 ++++++++++
arch/arm/mach-rockchip/rk3399/Kconfig | 17 +
board/kobol/helios64/Kconfig | 24 +
board/kobol/helios64/MAINTAINERS | 6 +
board/kobol/helios64/Makefile | 5 +
board/kobol/helios64/helios64.c | 321 +++
board/kobol/helios64/sys_otp.c | 248 ++
board/kobol/helios64/sys_otp.h | 10 +
configs/helios64-rk3399_defconfig | 147 ++
include/configs/helios64.h | 47 +
12 files changed, 2111 insertions(+)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index aab5db79e5..67b3257902 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -139,6 +139,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
rk3399-firefly.dtb \
rk3399-gru-bob.dtb \
rk3399-gru-kevin.dtb \
+ rk3399-kobol-helios64.dtb \
rk3399-khadas-edge.dtb \
rk3399-khadas-edge-captain.dtb \
rk3399-khadas-edge-v.dtb \
diff --git a/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi
new file mode 100644
index 0000000000..411d9abc87
--- /dev/null
+++ b/arch/arm/dts/rk3399-kobol-helios64-u-boot.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2020 Aditya Prayoga (aditya@kobol.io)
+ */
+
+#include "rk3399-u-boot.dtsi"
+#include "rk3399-sdram-lpddr4-100.dtsi"
+/ {
+ aliases {
+ spi0 = &spi1;
+ spi1 = &spi2;
+ spi2 = &spi5;
+ ethernet0 = &gmac;
+ ethernet1 = &usb_lan;
+ };
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0xff1a0000 earlyprintk";
+ stdout-path = "serial2:1500000n8";
+ u-boot,spl-boot-order = "same-as-spl", &spiflash, &sdmmc, &sdhci;
+ };
+
+ config {
+ u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */
+ };
+};
+
+&gpio1 {
+ usb-mux-hs {
+ gpio-hog;
+ gpios = <RK_PA4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "USB_MUX_HS";
+ };
+
+ usb-mux-oe {
+ gpio-hog;
+ gpios = <RK_PB5 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "USB_MUX_OE#";
+ };
+
+ soc-flash-wp {
+ gpio-hog;
+ gpios = <RK_PC2 GPIO_ACTIVE_LOW>;
+ output-low;
+ line-name = "SOC_WP#";
+ };
+};
+
+&gpio2 {
+ sata-flash-wp {
+ gpio-hog;
+ gpios = <RK_PD0 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "SATA_WP#_LV";
+ };
+};
+
+&gpio4 {
+ auto-on-en-d {
+ gpio-hog;
+ gpios = <RK_PD1 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "AUTO_ON_EN_D";
+ };
+
+ auto-on-en-clk {
+ gpio-hog;
+ gpios = <RK_PD2 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "AUTO_ON_EN_CLK";
+ };
+
+ board-rev-id-0 {
+ gpio-hog;
+ gpios = <RK_PD5 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+
+ board-rev-id-1 {
+ gpio-hog;
+ gpios = <RK_PD6 GPIO_ACTIVE_HIGH>;
+ input;
+ };
+};
+
+&int_hub {
+ compatible = "usb-hub";
+ usb,device-class = <USB_CLASS_HUB>;
+};
+
+&pcie_prst {
+ rockchip,pins =
+ <2 RK_PD4 RK_FUNC_GPIO &pcfg_output_low>;
+};
+
+&pcie_pwr_en {
+ rockchip,pins =
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_output_low>;
+};
+
+&pinctrl {
+ usb {
+ usb_mux_hs: usb-mux-hs {
+ rockchip,pins =
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ usb_mux_oe: usb-mux-oe {
+ rockchip,pins =
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&spi1 {
+ spiflash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <25000000>;
+ status = "okay";
+ m25p,fast-read;
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&vdd_center {
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-init-microvolt = <950000>;
+};
+
+&vdd_log {
+ regulator-init-microvolt = <930000>;
+};
diff --git a/arch/arm/dts/rk3399-kobol-helios64.dts b/arch/arm/dts/rk3399-kobol-helios64.dts
new file mode 100644
index 0000000000..32061b84da
--- /dev/null
+++ b/arch/arm/dts/rk3399-kobol-helios64.dts
@@ -0,0 +1,1149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Aditya Prayoga (aditya@kobol.io)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Helios64";
+ compatible = "kobol,helios64", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ user2-button {
+ label = "User Button 2";
+ linux,code = <BTN_1>;
+ press-threshold-microvolt = <100000>;
+ };
+ };
+
+ beeper: beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc12v_dcin: vcc12v-dcin {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ vcc12v_dcin_bkup: vcc12v-dcin-bkup {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_dcin_bkup";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc12v_dcin>;
+ };
+
+ vcc12v_hdd: vcc12v-hdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_hdd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_sys_s0: vcc1v8-sys-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_sys_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc1v8_sys_s3>;
+ };
+
+ vcc0v9_s3: vcc0v9-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc0v9_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys_s3>;
+ };
+
+ avdd_0v9_s0: avdd-0v9-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_0v9_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc1v8_sys_s3>;
+ };
+
+ avdd_1v8_s0: avdd-1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "avdd_1v8_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc3v3_sys_s3>;
+ };
+
+ pcie_power: pcie-power {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "pcie_power";
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_perdev>;
+ };
+
+ vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc3v0_sd";
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-boot-on;
+ startup-delay-us = <20000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ vin-supply = <&vcc3v3_sys_s3>;
+ };
+
+ vcc5v0_usb: vcc5v0-usb {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_usb_en>;
+ regulator-name = "vcc5v0_usb";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc5v0_perdev>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_vbus_en>;
+ regulator-name = "vcc5v0_typec";
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ vcc5v0_perdev: vcc5v0-perdev {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_perdev";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
+ vcc5v0_hdd: vcc5v0-hdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_hdd";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
+ vcc5v0_sys: vcc5v0-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_dcin_bkup>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <830000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc5v0_sys>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ power_hdd_a: power-hdd-a {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd_a_power>;
+ regulator-name = "power_hdd_a";
+ };
+
+ power_hdd_b: power-hdd-b {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdd_b_power>;
+ regulator-name = "power_hdd_b";
+ };
+
+ usblan_power: usblan-power {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_lan_en>;
+ regulator-name = "usblan_power";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_usb>;
+ };
+
+ fan1: p7-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm0 0 40000 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 80 170 255>;
+ };
+
+ fan2: p6-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm1 0 40000 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 80 170 255>;
+ };
+
+ gpio-charger {
+ compatible = "gpio-charger";
+ charger-type = "mains";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ charge-status-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ac_present_ap>, <&charger_status>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>, <&user1btn>, <&wake_on_lan>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ user1-button {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
+ label = "User Button 1";
+ linux,code = <BTN_0>;
+ };
+ };
+
+ hdmi_dp_sound: hdmi-dp-sound {
+ status = "okay";
+ compatible = "rockchip,rk3399-hdmi-dp";
+ rockchip,cpu = <&i2s2>;
+ rockchip,codec = <&cdn_dp>;
+ };
+
+ io_leds: io-gpio-leds {
+ status = "okay";
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&network_act>, <&usb3_act>,
+ <&sata_act>, <&sata_err_led>;
+
+ network {
+ label = "helios64:blue:net";
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "netdev";
+ default-state = "off";
+ };
+
+ sata {
+ label = "helios64:blue:hdd-status";
+ gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ default-state = "off";
+ };
+
+ sata_err1 {
+ label = "helios64:red:ata1-err";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata_err2 {
+ label = "helios64:red:ata2-err";
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata_err3 {
+ label = "helios64:red:ata3-err";
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata_err4 {
+ label = "helios64:red:ata4-err";
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ sata_err5 {
+ label = "helios64:red:ata5-err";
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ usb3 {
+ label = "helios64:blue:usb3";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&int_hub_port1>,
+ <&int_hub_port2>,
+ <&int_hub_port3>;
+ linux,default-trigger = "usbport";
+ default-state = "off";
+ };
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+ status = "okay";
+
+ power-led {
+ label = "helios64:blue:power-status";
+ pwms = <&pwm3 0 2000000000 0>;
+ max-brightness = <255>;
+ };
+ };
+
+ system_leds: system-gpio-leds {
+ status = "okay";
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&system_led>;
+
+ status-led {
+ label = "helios64::status";
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "on";
+ mode = <0x23>;
+ };
+
+ fault-led {
+ label = "helios64:red:fault";
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "panic";
+ default-state = "keep";
+ mode = <0x23>;
+ };
+ };
+};
+
+&cdn_dp {
+ status = "okay";
+ extcon = <&fusb0>;
+ phys = <&tcphy0_dp>;
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_alert0 {
+ temperature = <80000>;
+};
+
+&cpu_alert1 {
+ temperature = <95000>;
+};
+
+&cpu_crit {
+ temperature = <100000>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins &rgmii_phy_reset>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x20>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ interrupt-parent = <&gpio0>;
+ interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc6-supply = <&vcc5v0_sys>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys_s3>;
+ vcc9-supply = <&vcc5v0_sys>;
+ vcc10-supply = <&vcc5v0_sys>;
+ vcc11-supply = <&vcc5v0_sys>;
+ vcc12-supply = <&vcc3v3_sys_s3>;
+ vddio-supply = <&vcc3v0_s3>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr_s3: DCDC_REG3 {
+ regulator-name = "vcc_ddr_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc1v8_sys_s3: DCDC_REG4 {
+ regulator-name = "vcc1v8_sys_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ /* not used */
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ };
+
+ /* not used */
+ vcc3v0_touch: LDO_REG2 {
+ regulator-name = "vcc3v0_touch";
+ };
+
+ vcc1v8_s3: LDO_REG3 {
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio_s0: LDO_REG4 {
+ regulator-name = "vcc_sdio_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-state-mem {
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ /* not used */
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ };
+
+ vcc1v5_s3: LDO_REG6 {
+ regulator-name = "vcc1v5_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ /* not used */
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ };
+
+ vcc3v0_s3: LDO_REG8 {
+ regulator-name = "vcc3v0_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_sys_s0: SWITCH_REG1 {
+ regulator-name = "vcc3v3_sys_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-compatible = "fan53555-reg";
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ gpio-expander@20 {
+ compatible = "nxp,pca9555";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pca0_pins>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ vcc-supply = <&vcc3v3_sys_s3>;
+ };
+
+ temp@4c {
+ compatible = "onnn,lm75";
+ reg = <0x4c>;
+ vcc-supply = <&vcc3v3_sys_s0>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <160>;
+ i2c-scl-falling-time-ns = <30>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ /* For use with typec-fusb302 */
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "dual";
+ data-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 1200, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ op-sink-microwatt = <5000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usb_con_hs: endpoint {
+ remote-endpoint = <&u2phy0_typec_hs>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&tcphy0_typec_ss>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ usb_con_sbu: endpoint {
+ remote-endpoint = <&tcphy0_typec_dp>;
+ };
+ };
+ };
+ };
+ };
+};
+
+/* I2C on UEXT */
+&i2c7 {
+ status = "okay";
+};
+
+/* External I2C */
+&i2c8 {
+ status = "okay";
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcc1v8_sys_s0>;
+ audio-supply = <&vcc1v8_sys_s0>;
+ sdmmc-supply = <&vcc_sdio_s0>;
+ gpio1830-supply = <&vcc3v0_s3>;
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
+ num-lanes = <2>;
+ max-link-speed = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_prst &pcie_clkreqn_cpm>;
+ vpcie12v-supply = <&vcc12v_dcin>;
+ vpcie3v3-supply = <&pcie_power>;
+ vpcie1v8-supply = <&avdd_1v8_s0>;
+ vpcie0v9-supply = <&avdd_0v9_s0>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ user1btn: usr1btn {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ charger {
+ ac_present_ap: ac-present-ap {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ charger_status: charger-status {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fan {
+ fan1_sense: fan1-sense {
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ fan2_sense: fan2-sense {
+ rockchip,pins = <4 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins =
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ fusb0_vbus_en: fusb0-vbus-en {
+ rockchip,pins =
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ gmac {
+ rgmii_phy_reset: rgmii-phy-reset {
+ rockchip,pins =
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+ };
+
+ leds {
+ network_act: network-act {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ usb3_act: usb3-act {
+ rockchip,pins =
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ sata_act: sata-act {
+ rockchip,pins =
+ <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ system_led: sys-led {
+ rockchip,pins =
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>,
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ sata_err_led: sata-err-led {
+ rockchip,pins =
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>,
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_down>,
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>,
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>,
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ misc {
+ pca0_pins: pca0-pins {
+ rockchip,pins =
+ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wake_on_lan: wake-on-lan {
+ rockchip,pins =
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_prst: pcie-prst {
+ rockchip,pins =
+ <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins =
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ power {
+ hdd_a_power: hdd-a-power {
+ rockchip,pins =
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hdd_b_power: hdd-b-power {
+ rockchip,pins =
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_usb_en: vcc5v0-usb-en {
+ rockchip,pins =
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+
+ usb_lan_en: usb-lan-en {
+ rockchip,pins =
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc3v0_s3>;
+ status = "okay";
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc1v8_s3>;
+ status = "okay";
+};
+
+&sdhci {
+ assigned-clock-rates = <150000000>;
+ bus-width = <8>;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ supports-emmc;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio_s0>;
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+};
+
+/* UEXT connector */
+&spi2 {
+ status = "okay";
+};
+
+&spi5 {
+ status = "okay";
+};
+
+&tcphy0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&tcphy0_dp {
+ port {
+ tcphy0_typec_dp: endpoint {
+ remote-endpoint = <&usb_con_sbu>;
+ };
+ };
+};
+
+&tcphy0_usb3 {
+ port {
+ tcphy0_typec_ss: endpoint {
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+ extcon = <&fusb0>;
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+
+ port {
+ u2phy0_typec_hs: endpoint {
+ remote-endpoint = <&usb_con_hs>;
+ };
+ };
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ extcon = <&fusb0>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ int_hub: hub@1 {
+ compatible = "usb2109,0815";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ int_hub_port1: port@1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+
+ int_hub_port2: port@2 {
+ reg = <2>;
+ #trigger-source-cells = <0>;
+ };
+
+ int_hub_port3: port@3 {
+ reg = <3>;
+ #trigger-source-cells = <0>;
+ };
+
+ usb_lan: device@4 {
+ compatible = "usbbda,8156";
+ reg = <4>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interface@0 { /* interface 0 of configuration 1 */
+ compatible = "usbbda,8156.config1.0";
+ reg = <0 1>;
+ };
+ };
+ };
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig b/arch/arm/mach-rockchip/rk3399/Kconfig
index 0833e083d9..80e0d1c182 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -39,6 +39,22 @@ config TARGET_PINEBOOK_PRO_RK3399
with 4Gb RAM, onboard eMMC, USB-C, a USB3 and USB2 port,
1920*1080 screen and all the usual laptop features.
+config TARGET_HELIOS64
+ bool "Kobol Innovations Helios64"
+ select BOARD_LATE_INIT
+ help
+ Helios64 is a Network Attached Storage board based on Rockchip RK3399.
+
+ Key features of the Helios64 include:
+ * on-board PCIe to 5 Ports SATA Controller JMB585
+ * on-board USB 3.0 hub (3x USB 3.0 host)
+ * USB Type-C (Support DisplayPort Alt Mode)
+ * on-board 1 Gigabit Ethernet
+ * on-board 2.5 Gigabit Ethernet (Realtek RTL8156)
+ * on-board eMMC
+ * on-board LPDDR4
+ * SPI, I2C, UART, GPIO
+
config TARGET_PUMA_RK3399
bool "Theobroma Systems RK3399-Q7 (Puma)"
help
@@ -164,6 +180,7 @@ endif # BOOTCOUNT_LIMIT
source "board/firefly/roc-pc-rk3399/Kconfig"
source "board/google/gru/Kconfig"
+source "board/kobol/helios64/Kconfig"
source "board/pine64/pinebook-pro-rk3399/Kconfig"
source "board/pine64/rockpro64_rk3399/Kconfig"
source "board/rockchip/evb_rk3399/Kconfig"
diff --git a/board/kobol/helios64/Kconfig b/board/kobol/helios64/Kconfig
new file mode 100644
index 0000000000..644cdbd8f3
--- /dev/null
+++ b/board/kobol/helios64/Kconfig
@@ -0,0 +1,24 @@
+if TARGET_HELIOS64
+
+config SYS_BOARD
+ default "helios64"
+
+config SYS_VENDOR
+ default "kobol"
+
+config SYS_CONFIG_NAME
+ default "helios64"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+
+config ENV_SECT_SIZE
+ default 0x1000 if ENV_IS_IN_SPI_FLASH
+
+config ENV_SIZE
+ default 0x8000
+
+config ENV_OFFSET
+ default 0x460000 if ENV_IS_IN_SPI_FLASH
+
+endif
diff --git a/board/kobol/helios64/MAINTAINERS b/board/kobol/helios64/MAINTAINERS
new file mode 100644
index 0000000000..a9c88c79e3
--- /dev/null
+++ b/board/kobol/helios64/MAINTAINERS
@@ -0,0 +1,6 @@
+HELIOS64 BOARD
+M: Aditya Prayoga <aditya@kobol.io>
+S: Maintained
+F: board/kobol/helios64/
+F: include/configs/helios64.h
+F: configs/helios64_defconfig
diff --git a/board/kobol/helios64/Makefile b/board/kobol/helios64/Makefile
new file mode 100644
index 0000000000..ab34245a6d
--- /dev/null
+++ b/board/kobol/helios64/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2020 Aditya Prayoga <aditya@kobol.io>
+
+obj-y := helios64.o sys_otp.o
diff --git a/board/kobol/helios64/helios64.c b/board/kobol/helios64/helios64.c
new file mode 100644
index 0000000000..8e97693c1f
--- /dev/null
+++ b/board/kobol/helios64/helios64.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Aditya Prayoga (aditya@kobol.io)
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <log.h>
+#include <led.h>
+#include <pci.h>
+#include <power/regulator.h>
+#include <scsi.h>
+#include <spl_gpio.h>
+#include <syscon.h>
+#include <usb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/gpio.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/arch-rockchip/misc.h>
+#include <asm/arch-rockchip/periph.h>
+
+#include "sys_otp.h"
+
+#ifndef CONFIG_TPL_BUILD
+int board_early_init_f(void)
+{
+#ifdef CONFIG_SPL_BUILD
+#define GPIO0_BASE 0xff720000
+#define GRF_BASE 0xff770000
+ struct rk3399_grf_regs * const grf = (void *)GRF_BASE;
+ struct rockchip_gpio_regs * const gpio = (void *)GPIO0_BASE;
+
+ /* Turn ON status LED. At this stage, FDT & DM is not initialized yet */
+ spl_gpio_output(gpio, GPIO(BANK_B, 4), 1);
+#endif
+ return 0;
+}
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+int board_early_init_r(void)
+{
+ read_otp_data();
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_MISC_INIT_R
+#define GRF_IO_VSEL_BT565_SHIFT 0
+#define GRF_IO_VSEL_AUDIO_SHIFT 1
+#define GRF_IO_VSEL_SDMMC_SHIFT 2
+#define GRF_IO_VSEL_GPIO1830_SHIFT 3
+
+#define PMUGRF_CON0_VSEL_SHIFT 8
+#define PMUGRF_CON0_PMU1830_VOL_SHIFT 9
+static void setup_iodomain(void)
+{
+ struct rk3399_grf_regs *grf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+ struct rk3399_pmugrf_regs *pmugrf =
+ syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
+
+ /* BT565 is in 1.8v domain */
+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_BT565_SHIFT);
+
+ /* AUDIO is in 1.8v domain */
+ rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_AUDIO_SHIFT);
+
+ /* SDMMC is in 3.0v domain */
+ rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_SDMMC_SHIFT);
+
+ /* GPIO1830 is in 3.0v domain */
+ rk_setreg(&grf->io_vsel, 0 << GRF_IO_VSEL_GPIO1830_SHIFT);
+
+ /* Set GPIO1 1.8v/3.0v source select to PMU1830_VOL */
+ rk_setreg(&pmugrf->soc_con0, 1 << PMUGRF_CON0_VSEL_SHIFT);
+ rk_setreg(&pmugrf->soc_con0, 0 << PMUGRF_CON0_PMU1830_VOL_SHIFT);
+}
+
+static void init_vdd_center(void)
+{
+ struct udevice *regulator;
+ struct dm_regulator_uclass_plat *uc_pdata;
+ int ret;
+
+ ret = regulator_get_by_platname("vdd_center", &regulator);
+ if (ret)
+ return;
+
+ uc_pdata = dev_get_uclass_plat(regulator);
+ ret = regulator_set_value(regulator, uc_pdata->init_uV);
+ if (ret)
+ debug("%s vdd_center init fail! ret %d\n", __func__, ret);
+}
+
+/*
+ * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
+ *
+ * If bootsource is uSD-card we can assume that we want to use the
+ * SD-Card instead of the eMMC as first boot_target for distroboot.
+ * We only want to swap the defaults and not any custom environment a
+ * user has set. We exit early if a changed boot_targets environment
+ * is detected.
+ */
+static int setup_boottargets(void)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+ char *env_default, *env;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return -1;
+ }
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ env_default = env_get_default("boot_targets");
+ env = env_get("boot_targets");
+ if (!env) {
+ debug("%s: boot_targets does not exist\n", __func__);
+ return -1;
+ }
+ debug("%s: boot_targets current: %s - default: %s\n",
+ __func__, env, env_default);
+
+ if (strcmp(env_default, env) != 0) {
+ debug("%s: boot_targets not default, don't change it\n",
+ __func__);
+ return 0;
+ }
+
+ /*
+ * Only run, if booting from mmc1 (i.e. /mmc@fe320000) and
+ * only consider cases where the default boot-order first
+ * tries to boot from mmc0 (eMMC) and then from mmc1
+ * (i.e. external SD).
+ *
+ * In other words: the SD card will be moved to earlier in the
+ * order, if U-Boot was also loaded from the SD-card.
+ */
+ if (!strcmp(boot_device, "/mmc@fe320000")) {
+ char *mmc0, *mmc1;
+
+ debug("%s: booted from SD-Card\n", __func__);
+ mmc0 = strstr(env, "mmc0");
+ mmc1 = strstr(env, "mmc1");
+
+ if (!mmc0 || !mmc1) {
+ debug("%s: only one mmc boot_target found\n", __func__);
+ return -1;
+ }
+
+ /*
+ * If mmc0 comes first in the boot order, we need to change
+ * the strings to make mmc1 first.
+ */
+ if (mmc0 < mmc1) {
+ mmc0[3] = '1';
+ mmc1[3] = '0';
+ debug("%s: set boot_targets to: %s\n", __func__, env);
+ env_set("boot_targets", env);
+ }
+ }
+
+ return 0;
+}
+
+static void setup_leds(void)
+{
+ struct udevice *dev;
+
+ led_get_by_label("helios64::status", &dev);
+ led_set_state(dev, LEDST_OFF);
+ mdelay(250);
+ led_set_state(dev, LEDST_ON);
+}
+
+int misc_init_r(void)
+{
+ const u32 cpuid_offset = 0x7;
+ const u32 cpuid_length = 0x10;
+ u8 cpuid[cpuid_length];
+ int ret;
+
+ setup_iodomain();
+ init_vdd_center();
+ set_board_info();
+
+ ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+ if (ret)
+ return ret;
+
+ ret = rockchip_cpuid_set(cpuid, cpuid_length);
+ if (ret)
+ return ret;
+
+ if (mac_read_from_otp())
+ ret = rockchip_setup_macaddr();
+
+ setup_boottargets();
+ setup_leds();
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_ROCKCHIP_ADVANCED_RECOVERY
+void rockchip_prepare_download_mode(void)
+{
+ struct gpio_desc *enable, *mux;
+
+ if (gpio_hog_lookup_name("USB_MUX_OE#", &enable)) {
+ debug("Fail to get USB_MUX_OE\n");
+ return;
+ }
+
+ if (gpio_hog_lookup_name("USB_MUX_HS", &mux)) {
+ debug("Fail to get USB_MUX_HS\n");
+ return;
+ }
+
+ dm_gpio_set_value(enable, 0);
+ mdelay(100);
+ dm_gpio_set_value(mux, 1);
+ mdelay(100);
+ dm_gpio_set_value(enable, 1);
+}
+#endif
+
+#ifdef CONFIG_LAST_STAGE_INIT
+static void auto_power_enable(void)
+{
+ struct gpio_desc *enable, *clock;
+
+ if (gpio_hog_lookup_name("AUTO_ON_EN_D", &enable)) {
+ debug("Fail to get AUTO_ON_EN_D\n");
+ return;
+ }
+
+ if (gpio_hog_lookup_name("AUTO_ON_EN_CLK", &clock)) {
+ debug("Fail to get AUTO_ON_EN_CLK\n");
+ return;
+ }
+
+ dm_gpio_set_value(enable, 1);
+ dm_gpio_set_value(clock, 1);
+ mdelay(10);
+ dm_gpio_set_value(clock, 0);
+}
+
+static void sata_power_enable(void)
+{
+ struct udevice *rail_a, *rail_b;
+ int ret;
+
+ ret = regulator_get_by_platname("power_hdd_a", &rail_a);
+ if (!ret) {
+ ret = regulator_set_enable(rail_a, true);
+ if (!ret)
+ mdelay(10000);
+ }
+
+ ret = regulator_get_by_platname("power_hdd_b", &rail_b);
+ if (!ret)
+ ret = regulator_set_enable(rail_b, true);
+
+}
+
+int last_stage_init(void)
+{
+ auto_power_enable();
+ sata_power_enable();
+
+#ifdef CONFIG_PCI
+ scsi_scan(true);
+#endif
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_BOARDINFO_LATE)
+int checkboard(void)
+{
+ int major, minor;
+
+ printf("Revision: ");
+
+ if (!get_revision(&major, &minor))
+ printf("%i.%i - %s\n", major, minor, get_variant());
+ else
+ printf("UNKNOWN\n");
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ char *env;
+
+ env = env_get("board_rev");
+ if (env)
+ fdt_setprop_string(blob, fdt_path_offset(blob, "/"),
+ "kobol,board-rev", env);
+
+ env = env_get("cpuid#");
+ if (env)
+ fdt_setprop_string(blob, fdt_path_offset(blob, "/"),
+ "kobol,cpu-id", env);
+
+ return 0;
+}
+#endif
diff --git a/board/kobol/helios64/sys_otp.c b/board/kobol/helios64/sys_otp.c
new file mode 100644
index 0000000000..3a27834641
--- /dev/null
+++ b/board/kobol/helios64/sys_otp.c
@@ -0,0 +1,248 @@
+#include <linux/types.h>
+#include <dm.h>
+#include <spi.h>
+#include <log.h>
+#include <net.h>
+#include <u-boot/crc.h>
+
+#include "sys_otp.h"
+
+#define OTP_DEVICE_BUS 0
+#define OTP_DEVICE_CS 0
+#define MAX_NUM_PORTS 2
+
+enum board_variant {
+ BOARD_VARIANT_INVALID = 0,
+ BOARD_VARIANT_ENG_SAMPLE,
+ BOARD_VARIANT_4G_PROD_NO_ECC,
+ BOARD_VARIANT_MAX
+};
+
+struct __attribute__ ((__packed__)) otp_data_t {
+ u8 magic[8];
+ u8 part_num[16];
+ u8 variant;
+ u8 revision;
+ u8 serial_num[6];
+ u8 mfg_year[2];
+ u8 mfg_month;
+ u8 mfg_day;
+ u8 mac_addr[MAX_NUM_PORTS][6];
+ u8 reserved[204];
+ u32 checksum;
+} otp;
+
+static struct spi_slave *slave;
+static int has_been_read = 0;
+static int data_valid = 0;
+
+static inline int is_data_valid(void)
+{
+ return data_valid;
+}
+
+static inline int is_valid_header(void)
+{
+ if ((otp.magic[0] == 'H') || (otp.magic[1] == '6') ||
+ (otp.magic[2] == '4') || (otp.magic[3] == 'N') ||
+ (otp.magic[4] == 'P') || (otp.magic[5] == 'V') ||
+ (otp.magic[6] == '1') || (otp.magic[7] == 0))
+
+ return 1;
+
+ return 0;
+}
+
+static int init_system_otp(int bus, int cs)
+{
+ int ret;
+ char name[30], *str;
+ struct udevice *dev;
+
+ snprintf(name, sizeof(name), "generic_%d:%d", bus, cs);
+ str = strdup(name);
+ if (!str)
+ return -ENOMEM;
+ ret = spi_get_bus_and_cs(bus, cs, 25000000, CONFIG_DEFAULT_SPI_MODE, "spi_generic_drv",
+ str, &dev, &slave);
+ return ret;
+}
+
+#ifdef DEBUG
+/**
+ * show_otp_data - display the contents of the OTP register
+ */
+static void show_otp_data(void)
+{
+ u32 i;
+ u32 crc;
+
+ const char* var_str[BOARD_VARIANT_MAX] = {
+ "Invalid variant",
+ "Engineering Sample",
+ "Production - 4GB non ECC"
+ };
+
+ printf("\n");
+ printf("Register dump: (%lu bytes)\n", sizeof(otp));
+ for (i = 0; i < sizeof(otp); i++) {
+ if ((i % 16) == 0)
+ printf("%02X: ", i);
+ printf("%02X ", ((u8 *)&otp)[i]);
+ if (((i % 16) == 15) || (i == sizeof(otp) - 1))
+ printf("\n");
+ }
+
+ if (!is_valid_header())
+ return;
+
+ printf("Part Number: %s\n", otp.part_num);
+ printf("Variant: %s\n", var_str[otp.variant]);
+ printf("Revision: %x.%x\n", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f);
+ printf("Serial Number: %012llx\n", *((uint64_t*) otp.serial_num) &
+ 0xFFFFFFFFFFFF);
+ printf("Manufacturing Date: %02X-%02X-%04X (DD-MM-YYYY)\n", otp.mfg_day,
+ otp.mfg_month, *(u16*) otp.mfg_year);
+
+ printf("1GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ otp.mac_addr[0][0], otp.mac_addr[0][1], otp.mac_addr[0][2],
+ otp.mac_addr[0][3], otp.mac_addr[0][4], otp.mac_addr[0][5]);
+
+ printf("2.5GbE MAC Address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+ otp.mac_addr[1][0], otp.mac_addr[1][1], otp.mac_addr[1][2],
+ otp.mac_addr[1][3], otp.mac_addr[1][4], otp.mac_addr[1][5]);
+
+ crc = crc32(0, (void *)&otp, sizeof(otp) - 4);
+
+ if (crc == le32_to_cpu(otp.checksum))
+ printf("CRC: %08x\n\n", le32_to_cpu(otp.checksum));
+ else
+ printf("CRC: %08x (should be %08x)\n\n",
+ le32_to_cpu(otp.checksum), crc);
+
+}
+#endif
+
+int read_otp_data(void)
+{
+ int ret;
+ u8 dout[5];
+
+ if (has_been_read) {
+ if (is_data_valid())
+ return 0;
+ else
+ goto data_invalid;
+ }
+
+ ret = init_system_otp(OTP_DEVICE_BUS, OTP_DEVICE_CS);
+ if (ret)
+ return ret;
+
+ ret = spi_claim_bus(slave);
+ if (ret) {
+ debug("SPI: Failed to claim SPI bus: %d\n", ret);
+ return ret;
+ }
+
+ dout[0] = 0x48;
+ dout[1] = 0x00;
+ dout[2] = 0x10; /* Security Register #1 */
+ dout[3] = 0x00;
+ dout[4] = 0x00; /* Dummy Byte */
+
+ ret = spi_write_then_read(slave, dout, sizeof(dout), NULL, (u8 *)&otp,
+ sizeof(otp));
+
+ spi_release_bus(slave);
+#ifdef DEBUG
+ show_otp_data();
+#endif
+
+ has_been_read = (ret == 0) ? 1 : 0;
+ if (!is_valid_header())
+ goto data_invalid;
+
+ if (crc32(0, (void *)&otp, sizeof(otp) - 4) ==
+ le32_to_cpu(otp.checksum))
+ data_valid = 1;
+
+ if (!is_data_valid())
+ goto data_invalid;
+
+ return 0;
+
+data_invalid:
+ printf("Invalid board ID data!\n");
+ return -1;
+}
+
+int get_revision(int *major, int *minor)
+{
+ if (!is_data_valid())
+ return -1;
+
+ *major = (otp.revision & 0xf0) >> 4;
+ *minor = otp.revision & 0x0f;
+
+ return 0;
+}
+
+const char *get_variant(void)
+{
+ const char* var_str[BOARD_VARIANT_MAX] = {
+ "Unknown",
+ "Engineering Sample",
+ "4GB non ECC"
+ };
+
+ if ((otp.variant < BOARD_VARIANT_ENG_SAMPLE) ||
+ (otp.variant >= BOARD_VARIANT_MAX))
+ return var_str[0];
+
+ return var_str[otp.variant];
+}
+
+void set_board_info(void)
+{
+ char env_str[13];
+
+ if (!is_data_valid())
+ return;
+
+ snprintf(env_str, sizeof(env_str), "%i.%i", (otp.revision & 0xf0) >> 4, otp.revision & 0x0f);
+ env_set("board_rev", env_str);
+
+ sprintf(env_str, "%012llx", *((uint64_t*) otp.serial_num) &
+ 0xFFFFFFFFFFFF);
+
+ env_set("serial#", env_str);
+}
+
+int mac_read_from_otp(void)
+{
+ unsigned int i;
+ int ret;
+
+ if (!is_data_valid())
+ return -1;
+
+ for (i = 0; i < MAX_NUM_PORTS; i++) {
+ char enetvar[9];
+
+ sprintf(enetvar, i ? "eth%daddr" : "ethaddr", i);
+
+ if (!is_valid_ethaddr(otp.mac_addr[i])) {
+ debug("Not valid %s!\n", enetvar);
+ continue;
+ }
+
+ /* Only initialize environment variables that are blank
+ * (i.e. have not yet been set)
+ */
+ if (!env_get(enetvar))
+ eth_env_set_enetaddr(enetvar, otp.mac_addr[i]);
+ }
+
+ return ret;
+}
diff --git a/board/kobol/helios64/sys_otp.h b/board/kobol/helios64/sys_otp.h
new file mode 100644
index 0000000000..61f6f3b380
--- /dev/null
+++ b/board/kobol/helios64/sys_otp.h
@@ -0,0 +1,10 @@
+#ifndef __HELIOS64_SYS_OTP_H
+#define __HELIOS64_SYS_OTP_H
+
+int read_otp_data(void);
+void set_board_info(void);
+int get_revision(int *major, int *minor);
+const char *get_variant(void);
+int mac_read_from_otp(void);
+
+#endif
diff --git a/configs/helios64-rk3399_defconfig b/configs/helios64-rk3399_defconfig
new file mode 100644
index 0000000000..12f2dc0c40
--- /dev/null
+++ b/configs/helios64-rk3399_defconfig
@@ -0,0 +1,147 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-kobol-helios64"
+CONFIG_ROCKCHIP_RK3399=y
+CONFIG_ROCKCHIP_ADVANCED_RECOVERY=y
+CONFIG_ROCKCHIP_ADVANCED_RECOVERY_LED="helios64::status"
+# CONFIG_ROCKCHIP_ADVANCED_RECOVERY_ROCKUSB is not set
+CONFIG_TARGET_HELIOS64=y
+CONFIG_DEBUG_UART_BASE=0xFF1A0000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI=y
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x800800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-kobol-helios64.dtb"
+CONFIG_CONSOLE_MUX=y
+CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
+CONFIG_BOARD_TYPES=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_LAST_STAGE_INIT=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_TPL=y
+CONFIG_CMD_CONFIG=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+CONFIG_CMD_BOOTEFI_HELLO=y
+CONFIG_CMD_BOOTMENU=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_MD5SUM_VERIFY=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MX_CYCLIC=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_SHA1SUM_VERIFY=y
+CONFIG_CMD_STRINGS=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_EXCEPTION=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_FS_UUID=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_IP_DEFRAG=y
+# CONFIG_DM_DEVICE_REMOVE is not set
+CONFIG_SCSI_AHCI=y
+CONFIG_AHCI_PCI=y
+CONFIG_SPL_FIRMWARE=y
+CONFIG_GPIO_HOG=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_I2C_DEFAULT_BUS_NUMBER=0x8
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MISC=y
+CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_ROCKCHIP_OTP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_PHY_GIGE=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_RGMII=y
+CONFIG_MII=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PCI=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_DM_PMIC_FAN53555=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR_GPIO=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SPI=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_SYSCON=y
+CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+# CONFIG_SPL_DM_USB is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_RTL8152=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
+CONFIG_HEXDUMP=y
diff --git a/include/configs/helios64.h b/include/configs/helios64.h
new file mode 100644
index 0000000000..6fca9a6be0
--- /dev/null
+++ b/include/configs/helios64.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2020 Aditya Prayoga <aditya@kobol.io>
+ */
+
+#ifndef __HELIOS64_H
+#define __HELIOS64_H
+
+#include <configs/rk3399_common.h>
+
+#define SDRAM_BANK_SIZE (2UL << 30)
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+ #define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+ #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+ #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+ #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+ #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#endif
+
+
+#ifndef CONFIG_SPL_BUILD
+#if CONFIG_IS_ENABLED(SCSI)
+
+ #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
+ #define CONFIG_SYS_SCSI_MAX_LUN 1
+ #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+ #define BOOT_TARGET_SCSI(func) \
+ func(SCSI, scsi, 0)
+#else
+ #define BOOT_TARGET_SCSI(func)
+#endif
+
+#undef BOOT_TARGET_DEVICES
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_MMC(func) \
+ BOOT_TARGET_USB(func) \
+ BOOT_TARGET_SCSI(func) \
+ BOOT_TARGET_PXE(func) \
+ BOOT_TARGET_DHCP(func)
+
+#endif
+
+#endif
--
Armbian
Reference in New Issue Copy Permalink