aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
build/patch/u-boot/u-boot-rockchip64-v2022.04/add-board-orangepi-r1-plus-0.patch

627 lines
18 KiB
Diff
Raw Permalink Normal View History

添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
2023-09-19 11:24:52 +08:00
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
Date: Sat, 20 Jun 2020 22:39:57 +0200
Subject: [ARCHEOLOGY] Initial ROCK Pi E support (as WIP) (#2042)
> X-Git-Archeology: > recovered message: > * WIP: Adding RockpiE config
> X-Git-Archeology: > recovered message: > Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
> X-Git-Archeology: > recovered message: > * Mainline u-boot for ROCK Pi E
> X-Git-Archeology: > recovered message: > * Initial ROCK Pi E device tree in kernel
> X-Git-Archeology: > recovered message: > * Fixed supplies for ROCK Pi E device tree
> X-Git-Archeology: > recovered message: > * Adjusted u-boot load address for rockchip64 boards with 256MB eg. ROCK Pi E
> X-Git-Archeology: > recovered message: > * Blacklisted lima on ROCK Pi E
> X-Git-Archeology: > recovered message: > * Fixed ROCK Pi E patch after merge from master
> X-Git-Archeology: > recovered message: > * Removed mode settings from rk805 regulators
> X-Git-Archeology: > recovered message: > * Fixed issues with offloading for gigabit interface of RockPi E
> X-Git-Archeology: > recovered message: > * Adjusted ROCK Pi E board config
> X-Git-Archeology: > recovered message: > * Added dev branch for ROCK Pi E
> X-Git-Archeology: > recovered message: > * Add build targets
> X-Git-Archeology: > recovered message: > Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
> X-Git-Archeology: > recovered message: > * Exchange legacy to current in ROCK Pi E build targets
> X-Git-Archeology: > recovered message: > Co-authored-by: Piotr Szczepanik <piter75@gmail.com>
> X-Git-Archeology: - Revision e1ecb098330dc372740371dc2386f911833a0529: https://github.com/armbian/build/commit/e1ecb098330dc372740371dc2386f911833a0529
> X-Git-Archeology: Date: Sat, 20 Jun 2020 22:39:57 +0200
> X-Git-Archeology: From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
> X-Git-Archeology: Subject: Initial ROCK Pi E support (as WIP) (#2042)
> X-Git-Archeology:
> X-Git-Archeology: - Revision 72257bd0648c28fca32962126bb885a4a2c188cc: https://github.com/armbian/build/commit/72257bd0648c28fca32962126bb885a4a2c188cc
> X-Git-Archeology: Date: Tue, 23 Jun 2020 16:37:54 +0200
> X-Git-Archeology: From: Piotr Szczepanik <piter75@gmail.com>
> X-Git-Archeology: Subject: Make USB3 support of ROCK Pi E on par with other rk3328 boards (#2050)
> X-Git-Archeology:
> X-Git-Archeology: - Revision e36ce875b025e112127cf8cc2d34825ebfe36569: https://github.com/armbian/build/commit/e36ce875b025e112127cf8cc2d34825ebfe36569
> X-Git-Archeology: Date: Tue, 10 Nov 2020 21:43:13 +0100
> X-Git-Archeology: From: Piotr Szczepanik <piter75@gmail.com>
> X-Git-Archeology: Subject: Switched rockchip64-current to linux 5.9.y (#2309)
> X-Git-Archeology:
> X-Git-Archeology: - Revision ccbc888b3f5731790128684959b55b6552e26190: https://github.com/armbian/build/commit/ccbc888b3f5731790128684959b55b6552e26190
> X-Git-Archeology: Date: Sat, 28 Nov 2020 16:52:34 +0100
> X-Git-Archeology: From: Oleg <balbes-150@yandex.ru>
> X-Git-Archeology: Subject: add dts rk3328-roc-pc, fix WIFI and USB 3.0 rk3328 (#2390)
> X-Git-Archeology:
> X-Git-Archeology: - Revision 25bd76527e1276c4c00829f68c0ca0742ecc94c1: https://github.com/armbian/build/commit/25bd76527e1276c4c00829f68c0ca0742ecc94c1
> X-Git-Archeology: Date: Sat, 28 Nov 2020 18:10:53 +0100
> X-Git-Archeology: From: Piotr Szczepanik <piter75@gmail.com>
> X-Git-Archeology: Subject: Fix roc-rk3328-pc device tree reference to missing RK_FUNC_1
> X-Git-Archeology:
> X-Git-Archeology: - Revision dfd5cf9692e97774f7f0bfd72227144e36f58070: https://github.com/armbian/build/commit/dfd5cf9692e97774f7f0bfd72227144e36f58070
> X-Git-Archeology: Date: Sun, 13 Dec 2020 22:13:03 -0500
> X-Git-Archeology: From: tonymac32 <tonymckahan@gmail.com>
> X-Git-Archeology: Subject: [ rockchip64 ] Clean up patchset
> X-Git-Archeology:
> X-Git-Archeology: - Revision 25e0f1633467c020f6ae68d09964a522fbfbe613: https://github.com/armbian/build/commit/25e0f1633467c020f6ae68d09964a522fbfbe613
> X-Git-Archeology: Date: Mon, 18 Jan 2021 23:21:40 +0100
> X-Git-Archeology: From: Piotr Szczepanik <piter75@gmail.com>
> X-Git-Archeology: Subject: Adjusted power and pmic configuration for Station M1 in current/dev
> X-Git-Archeology:
> X-Git-Archeology: - Revision 0cdffb29b07305209efb12cf3b5ac6032d3a1153: https://github.com/armbian/build/commit/0cdffb29b07305209efb12cf3b5ac6032d3a1153
> X-Git-Archeology: Date: Wed, 24 Mar 2021 19:01:53 +0100
> X-Git-Archeology: From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
> X-Git-Archeology: Subject: Renaming DEV branch to EDGE (#2704)
> X-Git-Archeology:
> X-Git-Archeology: - Revision d8dbefd61838e5b0cfc2b93d2d168f3fb2666dfb: https://github.com/armbian/build/commit/d8dbefd61838e5b0cfc2b93d2d168f3fb2666dfb
> X-Git-Archeology: Date: Tue, 27 Jul 2021 00:05:09 -0400
> X-Git-Archeology: From: tonymac32 <tonymckahan@gmail.com>
> X-Git-Archeology: Subject: [ rockchip64 ] rk3328 change to mainline USB3
> X-Git-Archeology:
> X-Git-Archeology: - Revision a16699260fb786a4d89a1c335722e9fed49d19d2: https://github.com/armbian/build/commit/a16699260fb786a4d89a1c335722e9fed49d19d2
> X-Git-Archeology: Date: Fri, 08 Jul 2022 22:35:59 +1200
> X-Git-Archeology: From: schwar3kat <61094841+schwar3kat@users.noreply.github.com>
> X-Git-Archeology: Subject: Refactored orangepi-r1plus-lts dts in kernel add board patch
> X-Git-Archeology:
> X-Git-Archeology: - Revision 8648dde23ff090b5fb704adab036ed14cd944ba3: https://github.com/armbian/build/commit/8648dde23ff090b5fb704adab036ed14cd944ba3
> X-Git-Archeology: Date: Thu, 22 Sep 2022 10:25:28 +0200
> X-Git-Archeology: From: aiamadeus <42570690+aiamadeus@users.noreply.github.com>
> X-Git-Archeology: Subject: rockchip: fixes support for orangepi-r1plus (#4215)
> X-Git-Archeology:
> X-Git-Archeology: - Revision 2813365dd25e3ad110936cbf014b95b38d7090ec: https://github.com/armbian/build/commit/2813365dd25e3ad110936cbf014b95b38d7090ec
> X-Git-Archeology: Date: Mon, 07 Nov 2022 21:29:00 +0100
> X-Git-Archeology: From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
> X-Git-Archeology: Subject: Move known non working rockhip64 boards to previous boot loader (#4392)
> X-Git-Archeology:
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi | 38 +
arch/arm/dts/rk3328-orangepi-r1-plus.dts | 366 ++++++++++
configs/orangepi_r1_plus_rk3328_defconfig | 101 +++
4 files changed, 506 insertions(+)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 8d6b9b462b..261aa8fb58 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -122,6 +122,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
dtb-$(CONFIG_ROCKCHIP_RK3328) += \
rk3328-evb.dtb \
rk3328-nanopi-r2s.dtb \
+ rk3328-orangepi-r1-plus.dtb \
rk3328-roc-cc.dtb \
rk3328-rock64.dtb \
rk3328-rock-pi-e.dtb
diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
new file mode 100644
index 0000000000..477cd37e1e
--- /dev/null
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus-u-boot.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr4-666.dtsi"
+/ {
+ chosen {
+ u-boot,spl-boot-order = "same-as-spl", &sdmmc, &emmc;
+ };
+};
+
+&gpio0 {
+ u-boot,dm-spl;
+};
+
+&pinctrl {
+ u-boot,dm-spl;
+};
+
+&sdmmc0m1_pin {
+ u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+ u-boot,dm-spl;
+};
+
+&vcc_sd {
+ u-boot,dm-spl;
+};
+
+&gmac2io {
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+};
diff --git a/arch/arm/dts/rk3328-orangepi-r1-plus.dts b/arch/arm/dts/rk3328-orangepi-r1-plus.dts
new file mode 100644
index 0000000000..5a323ae3b3
--- /dev/null
+++ b/arch/arm/dts/rk3328-orangepi-r1-plus.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "rk3328.dtsi"
+
+/ {
+ model = "Xunlong Orange Pi R1 Plus";
+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
+
+ aliases {
+ ethernet1 = &rtl8153;
+ mmc0 = &sdmmc;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clk: gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+ pinctrl-names = "default";
+
+ lan_led: led-0 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "orangepi-r1-plus:green:lan";
+ };
+
+ sys_led: led-1 {
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+ label = "orangepi-r1-plus:red:status";
+ linux,default-trigger = "heartbeat";
+ };
+
+ wan_led: led-2 {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "orangepi-r1-plus:green:wan";
+ };
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vcc_sd";
+ regulator-boot-on;
+ vin-supply = <&vcc_io_33>;
+ };
+
+ vdd_5v: vdd-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_5v_lan: vdd-5v-lan {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&lan_vdd_pin>;
+ pinctrl-names = "default";
+ regulator-name = "vdd_5v_lan";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vdd_5v>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&display_subsystem {
+ status = "disabled";
+};
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+ clock_in_out = "input";
+ phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
+ phy-supply = <&vcc_io_33>;
+ pinctrl-0 = <&rgmiim1_pins>;
+ pinctrl-names = "default";
+ rx_delay = <0x18>;
+ snps,aal;
+ tx_delay = <0x24>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtl8211e: ethernet-phy@1 {
+ reg = <1>;
+ pinctrl-0 = <&eth_phy_reset_pin>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
+ pinctrl-0 = <&pmic_int_l>;
+ pinctrl-names = "default";
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vdd_5v>;
+ vcc2-supply = <&vdd_5v>;
+ vcc3-supply = <&vdd_5v>;
+ vcc4-supply = <&vdd_5v>;
+ vcc5-supply = <&vcc_io_33>;
+ vcc6-supply = <&vdd_5v>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io_33: DCDC_REG4 {
+ regulator-name = "vcc_io_33";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+ };
+ };
+};
+
+&io_domains {
+ pmuio-supply = <&vcc_io_33>;
+ vccio1-supply = <&vcc_io_33>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io_33>;
+ vccio4-supply = <&vcc_io_33>;
+ vccio5-supply = <&vcc_io_33>;
+ vccio6-supply = <&vcc_io_33>;
+ status = "okay";
+};
+
+&pinctrl {
+ gmac2io {
+ eth_phy_reset_pin: eth-phy-reset-pin {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ leds {
+ lan_led_pin: lan-led-pin {
+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led_pin: sys-led-pin {
+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_pin: wan-led-pin {
+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lan {
+ lan_vdd_pin: lan-vdd-pin {
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <0>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Second port is for USB 3.0 */
+ rtl8153: device@2 {
+ compatible = "usbbda,8153";
+ reg = <2>;
+ };
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
diff --git a/configs/orangepi_r1_plus_rk3328_defconfig b/configs/orangepi_r1_plus_rk3328_defconfig
new file mode 100644
index 0000000000..b5a5333e46
--- /dev/null
+++ b/configs/orangepi_r1_plus_rk3328_defconfig
@@ -0,0 +1,101 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-orangepi-r1-plus"
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK_R_ADDR=0x600000
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_MISC_INIT_R=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_TPL_OF_PLATDATA=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_TPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_TPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSINFO=y
+CONFIG_SYSRESET=y
+# CONFIG_TPL_SYSRESET is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
--
Armbian
Reference in New Issue Copy Permalink