aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c97506efcc
build/patch/kernel/archive/rk322x-4.4/01-linux-0009-mmc.patch

268 lines
9.4 KiB
Diff
Raw Normal View History

添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
2023-09-19 11:24:52 +08:00
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f82b1eb..d2c59b5 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1574,7 +1574,34 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
return ocr;
}
-int mmc_host_set_uhs_voltage(struct mmc_host *host, int signal_voltage)
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
+{
+ int err = 0;
+ int old_signal_voltage = host->ios.signal_voltage;
+
+ host->ios.signal_voltage = signal_voltage;
+ if (host->ops->start_signal_voltage_switch)
+ err = host->ops->start_signal_voltage_switch(host, &host->ios);
+
+ if (err)
+ host->ios.signal_voltage = old_signal_voltage;
+
+ return err;
+
+}
+
+void mmc_set_initial_signal_voltage(struct mmc_host *host)
+{
+ /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
+ if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
+ else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
+ else if (!mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120))
+ dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
+}
+
+int mmc_host_set_uhs_voltage(struct mmc_host *host)
{
u32 clock;
@@ -1586,7 +1613,7 @@ int mmc_host_set_uhs_voltage(struct mmc_host *host, int signal_voltage)
host->ios.clock = 0;
mmc_set_ios(host);
- if (__mmc_set_signal_voltage(host, signal_voltage))
+ if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
return -EAGAIN;
/* Keep clock gated for at least 10 ms, though spec only says 5 ms */
@@ -1597,23 +1624,7 @@ int mmc_host_set_uhs_voltage(struct mmc_host *host, int signal_voltage)
return 0;
}
-int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
-{
- int err = 0;
- int old_signal_voltage = host->ios.signal_voltage;
-
- host->ios.signal_voltage = signal_voltage;
- if (host->ops->start_signal_voltage_switch)
- err = host->ops->start_signal_voltage_switch(host, &host->ios);
-
- if (err)
- host->ios.signal_voltage = old_signal_voltage;
-
- return err;
-
-}
-
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
+int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
{
struct mmc_command cmd = {0};
int err = 0;
@@ -1621,13 +1632,6 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
BUG_ON(!host);
/*
- * Send CMD11 only if the request is to switch the card to
- * 1.8V signalling.
- */
- if (signal_voltage == MMC_SIGNAL_VOLTAGE_330)
- return __mmc_set_signal_voltage(host, signal_voltage);
-
- /*
* If we cannot switch voltages, return failure so the caller
* can continue without UHS mode
*/
@@ -1658,7 +1662,7 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr)
goto power_cycle;
}
- if (mmc_host_set_uhs_voltage(host, signal_voltage)) {
+ if (mmc_host_set_uhs_voltage(host)) {
/*
* Voltages may not have been switched, but we've already
* sent CMD11, so a power cycle is required anyway
@@ -1761,13 +1765,7 @@ void mmc_power_up(struct mmc_host *host, u32 ocr)
/* Set initial state and call mmc_set_ios */
mmc_set_initial_state(host);
- /* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
- if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
- dev_dbg(mmc_dev(host), "Initial signal voltage of 3.3v\n");
- else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180) == 0)
- dev_dbg(mmc_dev(host), "Initial signal voltage of 1.8v\n");
- else if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120) == 0)
- dev_dbg(mmc_dev(host), "Initial signal voltage of 1.2v\n");
+ mmc_set_initial_signal_voltage(host);
/*
* This delay should be sufficient to allow the power supply
@@ -1794,6 +1792,14 @@ void mmc_power_off(struct mmc_host *host)
if (host->ios.power_mode == MMC_POWER_OFF)
return;
+ mmc_set_initial_signal_voltage(host);
+
+ /*
+ * This delay should be sufficient to allow the power supply
+ * to reach the minimum voltage.
+ */
+ mmc_delay(10);
+
mmc_pwrseq_power_off(host);
host->ios.clock = 0;
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index 2cd32dc..2634722 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -43,9 +43,10 @@ void mmc_set_clock(struct mmc_host *host, unsigned int hz);
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
-int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage, u32 ocr);
-int mmc_host_set_uhs_voltage(struct mmc_host *host, int signal_voltage);
-int __mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr);
+int mmc_host_set_uhs_voltage(struct mmc_host *host);
+int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
+void mmc_set_initial_signal_voltage(struct mmc_host *host);
void mmc_set_timing(struct mmc_host *host, unsigned int timing);
void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);
int mmc_select_drive_strength(struct mmc_card *card, unsigned int max_dtr,
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index a814eb6..dd0040a 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1088,14 +1088,14 @@ static int mmc_select_hs_ddr(struct mmc_card *card)
*/
err = -EINVAL;
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
if (err && (card->mmc_avail_type & EXT_CSD_CARD_TYPE_DDR_1_8V))
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
/* make sure vccq is 3.3v after switching disaster */
if (err)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330);
if (!err)
mmc_set_timing(host, MMC_TIMING_MMC_DDR52);
@@ -1251,7 +1251,7 @@ out_err:
static int mmc_select_hs400es(struct mmc_card *card)
{
struct mmc_host *host = card->host;
- int err = 0;
+ int err = -EINVAL;
u8 val;
if (!(host->caps & MMC_CAP_8_BIT_DATA)) {
@@ -1259,11 +1259,11 @@ static int mmc_select_hs400es(struct mmc_card *card)
goto out_err;
}
- if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+ if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V)
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
- if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+ if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_8V)
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
/* If fails try again during next card power cycle */
if (err)
@@ -1362,10 +1362,10 @@ static int mmc_select_hs200(struct mmc_card *card)
old_signal_voltage = host->ios.signal_voltage;
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_2V)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
if (err && card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200_1_8V)
- err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
+ err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
/* If fails try again during next card power cycle */
if (err)
@@ -1393,7 +1393,7 @@ static int mmc_select_hs200(struct mmc_card *card)
err:
if (err) {
/* fall back to the old signal voltage, if fails report error */
- if (__mmc_set_signal_voltage(host, old_signal_voltage))
+ if (mmc_set_signal_voltage(host, old_signal_voltage))
err = -EIO;
pr_err("%s: %s failed, error %d\n", mmc_hostname(card->host),
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 78638ee..17919cb 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -742,8 +742,7 @@ try_again:
*/
if (!mmc_host_is_spi(host) && rocr &&
((*rocr & 0x41000000) == 0x41000000)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
- pocr);
+ err = mmc_set_uhs_voltage(host, pocr);
if (err == -EAGAIN) {
retries--;
goto try_again;
@@ -928,7 +927,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
BUG_ON(!host);
WARN_ON(!host->claimed);
-
retry:
err = mmc_sd_get_cid(host, ocr, cid, &rocr);
if (err)
@@ -1013,7 +1011,7 @@ retry:
goto free_card;
}
if (mmc_sd_card_using_v18(card)) {
- if (mmc_host_set_uhs_voltage(host, MMC_SIGNAL_VOLTAGE_180) ||
+ if (mmc_host_set_uhs_voltage(host) ||
mmc_sd_init_uhs_card(card)) {
v18_fixup_failed = true;
mmc_power_cycle(host, ocr);
@@ -1057,7 +1055,6 @@ retry:
mmc_set_bus_width(host, MMC_BUS_WIDTH_4);
}
}
-
done:
host->card = card;
return 0;
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c586b11..f221418 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -648,8 +648,7 @@ try_again:
* to make sure which speed mode should work.
*/
if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) {
- err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
- ocr_card);
+ err = mmc_set_uhs_voltage(host, ocr_card);
if (err == -EAGAIN) {
mmc_sdio_resend_if_cond(host, card);
retries--;
Reference in New Issue Copy Permalink