build/patch/kernel/archive/rockchip-5.16/1013-ARM-DTS-rk3288-tinker-Enabling-SDIO-and-Wifi.patch

99 lines
2.5 KiB
Diff
Raw Normal View History

From d5d5c53173c484a13cda62a537cbf75a5df4b0e4 Mon Sep 17 00:00:00 2001
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
Date: Mon, 5 Nov 2018 21:58:56 +0100
Subject: [PATCH] ARM: DTS: rk3288-tinker: Enabling SDIO and Wifi
Adding the appropriate nodes in order to exploit the WiFi capabilities
of the board.
Since these capabilities are provided through SDIO, and the SDIO
nodes were not defined, these were added too.
These seems to depend on each other so they are added in one big
patch.
Split if necessary.
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
---
arch/arm/boot/dts/rk3288-tinker.dts | 62 +++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index 1e43527aa..d4df13bed 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -6,8 +6,70 @@
/dts-v1/;
#include "rk3288-tinker.dtsi"
+#include <dt-bindings/clock/rockchip,rk808.h>
/ {
model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+
+ /* This is essential to get SDIO devices working.
+ The Wifi depends on SDIO ! */
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 RK808_CLKOUT1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&chip_enable_h>, <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>, <&gpio4 27 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ sdio_vref = <1800>;
+ status = "okay";
+ wifi_chip_type = "8723bs";
+ WIFI,host_wake_irq = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&io_domains {
+ wifi-supply = <&vcc_18>;
+};
+
+&pinctrl {
+ sdio-pwrseq {
+ wifi_enable_h: wifienable-h {
+ rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ chip_enable_h: chip-enable-h {
+ rockchip,pins = <4 27 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ clock-frequency = <50000000>;
+ clock-freq-min-max = <200000 50000000>;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+ supports-sdio;
};
--
2.16.4