build/patch/kernel/archive/rockchip64-5.13/board-rockpis-0007-arm64-dts-rockchip-add-cpu-s-thermal-config-for-rk33.patch

89 lines
2.3 KiB
Diff
Raw Normal View History

From a00542ec9867d2594171e041e51bc8fb5badc88c Mon Sep 17 00:00:00 2001
From: Igor Pecovnik <igor.pecovnik@gmail.com>
Date: Sun, 16 May 2021 23:11:05 +0200
Subject: [PATCH] add cpu's thermal config for
Signed-off-by: Igor Pecovnik <igor.pecovnik@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 64 ++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index fa0506726..2baf26485 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -526,6 +526,70 @@ saradc: saradc@ff1e0000 {
status = "disabled";
};
+ thermal_zones: thermal-zones {
+
+ soc_thermal: soc-thermal {
+ polling-delay-passive = <20>;
+ polling-delay = <1000>;
+ sustainable-power = <300>;
+
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ threshold: trip-point-0 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ target: trip-point-1 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ soc_crit: soc-crit {
+ temperature = <115000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
+ };
+
+ };
+
+ logic_thermal: logic-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 0>;
+ };
+ };
+
+ tsadc: tsadc@ff1f0000 {
+ compatible = "rockchip,rk3308-tsadc";
+ reg = <0x0 0xff1f0000 0x0 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ assigned-clocks = <&cru SCLK_TSADC>;
+ assigned-clock-rates = <50000>;
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "gpio", "otpout";
+ pinctrl-0 = <&tsadc_otp_pin>;
+ pinctrl-1 = <&tsadc_otp_out>;
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <120000>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@ff2c0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x0 0xff2c0000 0x0 0x4000>;
--
Created with Armbian build tools https://github.com/armbian/build