1344 lines
30 KiB
Diff
1344 lines
30 KiB
Diff
|
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
||
|
|
From: Aditya Prayoga <aditya@kobol.io>
|
||
|
|
Date: Tue, 15 Sep 2020 20:04:22 +0700
|
||
|
|
Subject: Add board Helios64
|
||
|
|
|
||
|
|
note: rpardini: this patch was rebased on top of 6.3.1, finally admitting
|
||
|
|
that it used to blindly overwrite the mainline dts (it was added when helios64
|
||
|
|
was not in the tree, and thus a "file addition"). the resulting patch
|
||
|
|
is the complete set of changes actually done.
|
||
|
|
|
||
|
|
Signed-off-by: Aditya Prayoga <aditya@kobol.io>
|
||
|
|
---
|
||
|
|
arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts | 996 +++++++---
|
||
|
|
1 file changed, 764 insertions(+), 232 deletions(-)
|
||
|
|
|
||
|
|
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
|
||
|
|
index 1eb287a3f8c0..ac0da7b7f43c 100644
|
||
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
|
||
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
|
||
|
|
@@ -1,53 +1,37 @@
|
||
|
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
- * Copyright (c) 2020 Aditya Prayoga <aditya@kobol.io>
|
||
|
|
- */
|
||
|
|
-
|
||
|
|
-/*
|
||
|
|
- * The Kobol Helios64 is a board designed to operate as a NAS and optionally
|
||
|
|
- * ships with an enclosing that can host five 2.5" hard disks.
|
||
|
|
- *
|
||
|
|
- * See https://wiki.kobol.io/helios64/intro/ for further details.
|
||
|
|
+ * Copyright (c) 2020 Aditya Prayoga (aditya@kobol.io)
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
+#include <dt-bindings/input/linux-event-codes.h>
|
||
|
|
+#include <dt-bindings/pwm/pwm.h>
|
||
|
|
+#include <dt-bindings/input/input.h>
|
||
|
|
+#include <dt-bindings/usb/pd.h>
|
||
|
|
#include "rk3399.dtsi"
|
||
|
|
#include "rk3399-opp.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
- model = "Kobol Helios64";
|
||
|
|
+ model = "Helios64";
|
||
|
|
compatible = "kobol,helios64", "rockchip,rk3399";
|
||
|
|
|
||
|
|
- aliases {
|
||
|
|
- mmc0 = &sdmmc;
|
||
|
|
- mmc1 = &sdhci;
|
||
|
|
- spi1 = &spi1;
|
||
|
|
- spi2 = &spi2;
|
||
|
|
- spi5 = &spi5;
|
||
|
|
- };
|
||
|
|
-
|
||
|
|
- avdd_0v9_s0: avdd-0v9-s0 {
|
||
|
|
- compatible = "regulator-fixed";
|
||
|
|
- regulator-name = "avdd_0v9_s0";
|
||
|
|
- regulator-always-on;
|
||
|
|
- regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <900000>;
|
||
|
|
- regulator-max-microvolt = <900000>;
|
||
|
|
- vin-supply = <&vcc1v8_sys_s3>;
|
||
|
|
- };
|
||
|
|
-
|
||
|
|
- avdd_1v8_s0: avdd-1v8-s0 {
|
||
|
|
- compatible = "regulator-fixed";
|
||
|
|
- regulator-name = "avdd_1v8_s0";
|
||
|
|
- regulator-always-on;
|
||
|
|
- regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <1800000>;
|
||
|
|
- regulator-max-microvolt = <1800000>;
|
||
|
|
- vin-supply = <&vcc3v3_sys_s3>;
|
||
|
|
+ adc-keys {
|
||
|
|
+ compatible = "adc-keys";
|
||
|
|
+ io-channels = <&saradc 1>;
|
||
|
|
+ io-channel-names = "buttons";
|
||
|
|
+ keyup-threshold-microvolt = <1800000>;
|
||
|
|
+ poll-interval = <100>;
|
||
|
|
+
|
||
|
|
+ user2-button {
|
||
|
|
+ label = "User Button 2";
|
||
|
|
+ linux,code = <BTN_1>;
|
||
|
|
+ press-threshold-microvolt = <100000>;
|
||
|
|
+ };
|
||
|
|
};
|
||
|
|
|
||
|
|
- chosen {
|
||
|
|
- stdout-path = "serial2:1500000n8";
|
||
|
|
+ beeper: beeper {
|
||
|
|
+ compatible = "gpio-beeper";
|
||
|
|
+ gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
clkin_gmac: external-gmac-clock {
|
||
|
|
@@ -57,107 +41,86 @@ clkin_gmac: external-gmac-clock {
|
||
|
|
#clock-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- fan1 {
|
||
|
|
- /* fan connected to P7 */
|
||
|
|
- compatible = "pwm-fan";
|
||
|
|
- pwms = <&pwm0 0 40000 0>;
|
||
|
|
- cooling-levels = <0 80 170 255>;
|
||
|
|
- };
|
||
|
|
-
|
||
|
|
- fan2 {
|
||
|
|
- /* fan connected to P6 */
|
||
|
|
- compatible = "pwm-fan";
|
||
|
|
- pwms = <&pwm1 0 40000 0>;
|
||
|
|
- cooling-levels = <0 80 170 255>;
|
||
|
|
+ vcc12v_dcin: vcc12v-dcin {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ regulator-name = "vcc12v_dcin";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <12000000>;
|
||
|
|
+ regulator-max-microvolt = <12000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- leds {
|
||
|
|
- compatible = "gpio-leds";
|
||
|
|
- pinctrl-names = "default";
|
||
|
|
- pinctrl-0 = <&sys_grn_led_on &sys_red_led_on>;
|
||
|
|
-
|
||
|
|
- led-0 {
|
||
|
|
- label = "helios64:green:status";
|
||
|
|
- gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||
|
|
- default-state = "on";
|
||
|
|
- };
|
||
|
|
-
|
||
|
|
- led-1 {
|
||
|
|
- label = "helios64:red:fault";
|
||
|
|
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||
|
|
- default-state = "keep";
|
||
|
|
- };
|
||
|
|
+ vcc12v_dcin_bkup: vcc12v-dcin-bkup {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ regulator-name = "vcc12v_dcin_bkup";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <12000000>;
|
||
|
|
+ regulator-max-microvolt = <12000000>;
|
||
|
|
+ vin-supply = <&vcc12v_dcin>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- hdd_a_power: hdd-a-power {
|
||
|
|
+ vcc12v_hdd: vcc12v-hdd {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- enable-active-high;
|
||
|
|
- gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||
|
|
- pinctrl-0 = <&hdd_a_power_en>;
|
||
|
|
- pinctrl-names = "default";
|
||
|
|
+ regulator-name = "vcc12v_hdd";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-name = "hdd_a_power";
|
||
|
|
- startup-delay-us = <2000000>;
|
||
|
|
+ regulator-min-microvolt = <12000000>;
|
||
|
|
+ regulator-max-microvolt = <12000000>;
|
||
|
|
+ vin-supply = <&vcc12v_dcin_bkup>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- hdd_b_power: hdd-b-power {
|
||
|
|
+ /* switched by pmic_sleep */
|
||
|
|
+ vcc1v8_sys_s0: vcc1v8-sys-s0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- enable-active-high;
|
||
|
|
- gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||
|
|
- pinctrl-0 = <&hdd_b_power_en>;
|
||
|
|
- pinctrl-names = "default";
|
||
|
|
+ regulator-name = "vcc1v8_sys_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-name = "hdd_b_power";
|
||
|
|
- startup-delay-us = <2000000>;
|
||
|
|
+ regulator-min-microvolt = <1800000>;
|
||
|
|
+ regulator-max-microvolt = <1800000>;
|
||
|
|
+ vin-supply = <&vcc1v8_sys_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- pcie_power: pcie-power {
|
||
|
|
+ vcc0v9_s3: vcc0v9-s3 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- enable-active-high;
|
||
|
|
- gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||
|
|
- pinctrl-0 = <&pcie_pwr>;
|
||
|
|
- pinctrl-names = "default";
|
||
|
|
+ regulator-name = "vcc0v9_s3";
|
||
|
|
+ regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-name = "pcie_power";
|
||
|
|
- startup-delay-us = <10000>;
|
||
|
|
- vin-supply = <&vcc5v0_perdev>;
|
||
|
|
+ regulator-min-microvolt = <900000>;
|
||
|
|
+ regulator-max-microvolt = <900000>;
|
||
|
|
+ vin-supply = <&vcc3v3_sys_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- usblan_power: usblan-power {
|
||
|
|
+ avdd_0v9_s0: avdd-0v9-s0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- enable-active-high;
|
||
|
|
- gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||
|
|
- pinctrl-names = "default";
|
||
|
|
- pinctrl-0 = <&usb_lan_en>;
|
||
|
|
- regulator-name = "usblan_power";
|
||
|
|
+ regulator-name = "avdd_0v9_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- vin-supply = <&vcc5v0_usb>;
|
||
|
|
+ regulator-min-microvolt = <900000>;
|
||
|
|
+ regulator-max-microvolt = <900000>;
|
||
|
|
+ vin-supply = <&vcc1v8_sys_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- vcc1v8_sys_s0: vcc1v8-sys-s0 {
|
||
|
|
+ avdd_1v8_s0: avdd-1v8-s0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- regulator-name = "vcc1v8_sys_s0";
|
||
|
|
+ regulator-name = "avdd_1v8_s0";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
- vin-supply = <&vcc1v8_sys_s3>;
|
||
|
|
+ vin-supply = <&vcc3v3_sys_s3>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- vcc3v0_sd: vcc3v0-sd {
|
||
|
|
+ pcie_power: pcie-power {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
enable-active-high;
|
||
|
|
- gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||
|
|
- regulator-name = "vcc3v0_sd";
|
||
|
|
- regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <3000000>;
|
||
|
|
- regulator-max-microvolt = <3000000>;
|
||
|
|
+ gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
- pinctrl-0 = <&sdmmc0_pwr_h>;
|
||
|
|
- vin-supply = <&vcc3v3_sys_s3>;
|
||
|
|
+ pinctrl-0 = <&pcie_pwr_en>;
|
||
|
|
+ regulator-name = "pcie_power";
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ startup-delay-us = <10000>;
|
||
|
|
+ vin-supply = <&vcc5v0_perdev>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc3v3_sys_s3: vcc_lan: vcc3v3-sys-s3 {
|
||
|
|
@@ -174,6 +137,39 @@ regulator-state-mem {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+ vcc3v0_sd: vcc3v0-sd {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ regulator-name = "vcc3v0_sd";
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <3000000>;
|
||
|
|
+ regulator-max-microvolt = <3000000>;
|
||
|
|
+ vin-supply = <&vcc3v3_sys_s3>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vcc5v0_usb: vcc5v0-usb {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ enable-active-high;
|
||
|
|
+ gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&vcc5v0_usb_en>;
|
||
|
|
+ regulator-name = "vcc5v0_usb";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <5000000>;
|
||
|
|
+ regulator-max-microvolt = <5000000>;
|
||
|
|
+ vin-supply = <&vcc5v0_perdev>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vcc5v0_typec: vcc5v0-typec-regulator {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ enable-active-high;
|
||
|
|
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&fusb0_vbus_en>;
|
||
|
|
+ regulator-name = "vcc5v0_typec";
|
||
|
|
+ vin-supply = <&vcc5v0_usb>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
vcc5v0_perdev: vcc5v0-perdev {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc5v0_perdev";
|
||
|
|
@@ -184,6 +180,16 @@ vcc5v0_perdev: vcc5v0-perdev {
|
||
|
|
vin-supply = <&vcc12v_dcin_bkup>;
|
||
|
|
};
|
||
|
|
|
||
|
|
+ vcc5v0_hdd: vcc5v0-hdd {
|
||
|
|
+ compatible = "regulator-fixed";
|
||
|
|
+ regulator-name = "vcc5v0_hdd";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <5000000>;
|
||
|
|
+ regulator-max-microvolt = <5000000>;
|
||
|
|
+ vin-supply = <&vcc12v_dcin_bkup>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
vcc5v0_sys: vcc5v0-sys {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc5v0_sys";
|
||
|
|
@@ -198,68 +204,213 @@ regulator-state-mem {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
- vcc5v0_usb: vcc5v0-usb {
|
||
|
|
+ vdd_log: vdd-log {
|
||
|
|
+ compatible = "pwm-regulator";
|
||
|
|
+ pwms = <&pwm2 0 25000 1>;
|
||
|
|
+ pwm-supply = <&vcc5v0_sys>;
|
||
|
|
+ regulator-name = "vdd_log";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <830000>;
|
||
|
|
+ regulator-max-microvolt = <1400000>;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-on-in-suspend;
|
||
|
|
+ regulator-suspend-microvolt = <900000>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ power_hdd_a: power-hdd-a {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
enable-active-high;
|
||
|
|
- gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
- pinctrl-0 = <&vcc5v0_usb_en>;
|
||
|
|
- regulator-name = "vcc5v0_usb";
|
||
|
|
+ pinctrl-0 = <&hdd_a_power>;
|
||
|
|
+ regulator-name = "power_hdd_a";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <5000000>;
|
||
|
|
- regulator-max-microvolt = <5000000>;
|
||
|
|
- vin-supply = <&vcc5v0_perdev>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- vcc12v_dcin: vcc12v-dcin {
|
||
|
|
+ power_hdd_b: power-hdd-b {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- regulator-name = "vcc12v_dcin";
|
||
|
|
+ enable-active-high;
|
||
|
|
+ gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&hdd_b_power>;
|
||
|
|
+ regulator-name = "power_hdd_b";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <12000000>;
|
||
|
|
- regulator-max-microvolt = <12000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- vcc12v_dcin_bkup: vcc12v-dcin-bkup {
|
||
|
|
+ usblan_power: usblan-power {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
- regulator-name = "vcc12v_dcin_bkup";
|
||
|
|
+ enable-active-high;
|
||
|
|
+ gpio = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&usb_lan_en>;
|
||
|
|
+ regulator-name = "usblan_power";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
- regulator-min-microvolt = <12000000>;
|
||
|
|
- regulator-max-microvolt = <12000000>;
|
||
|
|
- vin-supply = <&vcc12v_dcin>;
|
||
|
|
+ vin-supply = <&vcc5v0_usb>;
|
||
|
|
};
|
||
|
|
-};
|
||
|
|
|
||
|
|
-/*
|
||
|
|
- * The system doesn't run stable with cpu freq enabled, so disallow the lower
|
||
|
|
- * frequencies until this problem is properly understood and resolved.
|
||
|
|
- */
|
||
|
|
-&cluster0_opp {
|
||
|
|
- /delete-node/ opp00;
|
||
|
|
- /delete-node/ opp01;
|
||
|
|
- /delete-node/ opp02;
|
||
|
|
- /delete-node/ opp03;
|
||
|
|
- /delete-node/ opp04;
|
||
|
|
-};
|
||
|
|
+ fan1: p7-fan {
|
||
|
|
+ compatible = "pwm-fan";
|
||
|
|
+ pwms = <&pwm0 0 40000 0>;
|
||
|
|
+ cooling-min-state = <0>;
|
||
|
|
+ cooling-max-state = <3>;
|
||
|
|
+ #cooling-cells = <2>;
|
||
|
|
+ cooling-levels = <0 80 170 255>;
|
||
|
|
+ };
|
||
|
|
|
||
|
|
-&cluster1_opp {
|
||
|
|
- /delete-node/ opp00;
|
||
|
|
- /delete-node/ opp01;
|
||
|
|
- /delete-node/ opp02;
|
||
|
|
- /delete-node/ opp03;
|
||
|
|
- /delete-node/ opp04;
|
||
|
|
- /delete-node/ opp05;
|
||
|
|
- /delete-node/ opp06;
|
||
|
|
-};
|
||
|
|
+ fan2: p6-fan {
|
||
|
|
+ compatible = "pwm-fan";
|
||
|
|
+ pwms = <&pwm1 0 40000 0>;
|
||
|
|
+ cooling-min-state = <0>;
|
||
|
|
+ cooling-max-state = <3>;
|
||
|
|
+ #cooling-cells = <2>;
|
||
|
|
+ cooling-levels = <0 80 170 255>;
|
||
|
|
+ };
|
||
|
|
|
||
|
|
-&cpu_b0 {
|
||
|
|
- cpu-supply = <&vdd_cpu_b>;
|
||
|
|
+ gpio-charger {
|
||
|
|
+ compatible = "gpio-charger";
|
||
|
|
+ charger-type = "mains";
|
||
|
|
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ charge-status-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&ac_present_ap>, <&charger_status>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ gpio-keys {
|
||
|
|
+ compatible = "gpio-keys";
|
||
|
|
+ autorepeat;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&pwrbtn>, <&user1btn>, <&wake_on_lan>;
|
||
|
|
+
|
||
|
|
+ power {
|
||
|
|
+ debounce-interval = <100>;
|
||
|
|
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||
|
|
+ label = "Power";
|
||
|
|
+ linux,code = <KEY_POWER>;
|
||
|
|
+ wakeup-source;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ user1-button {
|
||
|
|
+ debounce-interval = <100>;
|
||
|
|
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
|
||
|
|
+ label = "User Button 1";
|
||
|
|
+ linux,code = <BTN_0>;
|
||
|
|
+ wakeup-source;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ hdmi_dp_sound: hdmi-dp-sound {
|
||
|
|
+ status = "okay";
|
||
|
|
+ compatible = "rockchip,rk3399-hdmi-dp";
|
||
|
|
+ rockchip,cpu = <&i2s2>;
|
||
|
|
+ rockchip,codec = <&cdn_dp>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ io_leds: io-gpio-leds {
|
||
|
|
+ status = "okay";
|
||
|
|
+ compatible = "gpio-leds";
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&network_act>, <&usb3_act>,
|
||
|
|
+ <&sata_act>, <&sata_err_led>;
|
||
|
|
+
|
||
|
|
+ network {
|
||
|
|
+ label = "helios64:blue:net";
|
||
|
|
+ gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ linux,default-trigger = "netdev";
|
||
|
|
+ default-state = "off";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata {
|
||
|
|
+ label = "helios64:blue:hdd-status";
|
||
|
|
+ gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ linux,default-trigger = "disk-activity";
|
||
|
|
+ default-state = "off";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err1 {
|
||
|
|
+ label = "helios64:red:ata1-err";
|
||
|
|
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err2 {
|
||
|
|
+ label = "helios64:red:ata2-err";
|
||
|
|
+ gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err3 {
|
||
|
|
+ label = "helios64:red:ata3-err";
|
||
|
|
+ gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err4 {
|
||
|
|
+ label = "helios64:red:ata4-err";
|
||
|
|
+ gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err5 {
|
||
|
|
+ label = "helios64:red:ata5-err";
|
||
|
|
+ gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ usb3 {
|
||
|
|
+ label = "helios64:blue:usb3";
|
||
|
|
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ trigger-sources = <&int_hub_port1>,
|
||
|
|
+ <&int_hub_port2>,
|
||
|
|
+ <&int_hub_port3>;
|
||
|
|
+ linux,default-trigger = "usbport";
|
||
|
|
+ default-state = "off";
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ pwmleds {
|
||
|
|
+ compatible = "pwm-leds";
|
||
|
|
+ status = "okay";
|
||
|
|
+
|
||
|
|
+ power-led {
|
||
|
|
+ label = "helios64:blue:power-status";
|
||
|
|
+ pwms = <&pwm3 0 2000000000 0>;
|
||
|
|
+ max-brightness = <255>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ system_leds: system-gpio-leds {
|
||
|
|
+ status = "okay";
|
||
|
|
+ compatible = "gpio-leds";
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&system_led>;
|
||
|
|
+
|
||
|
|
+ status-led {
|
||
|
|
+ label = "helios64::status";
|
||
|
|
+ gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ linux,default-trigger = "none";
|
||
|
|
+ default-state = "on";
|
||
|
|
+ mode = <0x23>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ fault-led {
|
||
|
|
+ label = "helios64:red:fault";
|
||
|
|
+ gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||
|
|
+ linux,default-trigger = "panic";
|
||
|
|
+ default-state = "keep";
|
||
|
|
+ mode = <0x23>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
};
|
||
|
|
|
||
|
|
-&cpu_b1 {
|
||
|
|
- cpu-supply = <&vdd_cpu_b>;
|
||
|
|
+&cdn_dp {
|
||
|
|
+ status = "okay";
|
||
|
|
+ extcon = <&fusb0>;
|
||
|
|
+ phys = <&tcphy0_dp>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu_l0 {
|
||
|
|
@@ -278,23 +429,36 @@ &cpu_l3 {
|
||
|
|
cpu-supply = <&vdd_cpu_l>;
|
||
|
|
};
|
||
|
|
|
||
|
|
+&cpu_b0 {
|
||
|
|
+ cpu-supply = <&vdd_cpu_b>;
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&cpu_b1 {
|
||
|
|
+ cpu-supply = <&vdd_cpu_b>;
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&emmc_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gmac {
|
||
|
|
- assigned-clock-parents = <&clkin_gmac>;
|
||
|
|
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||
|
|
+ assigned-clock-parents = <&clkin_gmac>;
|
||
|
|
clock_in_out = "input";
|
||
|
|
- phy-mode = "rgmii";
|
||
|
|
phy-supply = <&vcc_lan>;
|
||
|
|
+ phy-mode = "rgmii";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
- pinctrl-0 = <&rgmii_pins &gphy_reset>;
|
||
|
|
- rx_delay = <0x20>;
|
||
|
|
- tx_delay = <0x28>;
|
||
|
|
+ pinctrl-0 = <&rgmii_pins &rgmii_phy_reset>;
|
||
|
|
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||
|
|
snps,reset-active-low;
|
||
|
|
snps,reset-delays-us = <0 10000 50000>;
|
||
|
|
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||
|
|
+ tx_delay = <0x28>;
|
||
|
|
+ rx_delay = <0x20>;
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&gpu {
|
||
|
|
+ mali-supply = <&vdd_gpu>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
@@ -307,12 +471,15 @@ &i2c0 {
|
||
|
|
rk808: pmic@1b {
|
||
|
|
compatible = "rockchip,rk808";
|
||
|
|
reg = <0x1b>;
|
||
|
|
+ #clock-cells = <1>;
|
||
|
|
+ clock-output-names = "xin32k", "rk808-clkout2";
|
||
|
|
interrupt-parent = <&gpio0>;
|
||
|
|
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
- clock-output-names = "xin32k", "rk808-clkout2";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pmic_int_l>;
|
||
|
|
rockchip,system-power-controller;
|
||
|
|
+ wakeup-source;
|
||
|
|
+
|
||
|
|
vcc1-supply = <&vcc5v0_sys>;
|
||
|
|
vcc2-supply = <&vcc5v0_sys>;
|
||
|
|
vcc3-supply = <&vcc5v0_sys>;
|
||
|
|
@@ -325,10 +492,21 @@ rk808: pmic@1b {
|
||
|
|
vcc11-supply = <&vcc5v0_sys>;
|
||
|
|
vcc12-supply = <&vcc3v3_sys_s3>;
|
||
|
|
vddio-supply = <&vcc3v0_s3>;
|
||
|
|
- wakeup-source;
|
||
|
|
- #clock-cells = <1>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
+ vdd_center: DCDC_REG1 {
|
||
|
|
+ regulator-name = "vdd_center";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <800000>;
|
||
|
|
+ regulator-max-microvolt = <1000000>;
|
||
|
|
+ regulator-ramp-delay = <6001>;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-on-in-suspend;
|
||
|
|
+ regulator-suspend-microvolt = <950000>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
vdd_cpu_l: DCDC_REG2 {
|
||
|
|
regulator-name = "vdd_cpu_l";
|
||
|
|
regulator-always-on;
|
||
|
|
@@ -336,19 +514,48 @@ vdd_cpu_l: DCDC_REG2 {
|
||
|
|
regulator-min-microvolt = <750000>;
|
||
|
|
regulator-max-microvolt = <1350000>;
|
||
|
|
regulator-ramp-delay = <6001>;
|
||
|
|
-
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-off-in-suspend;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+ vcc_ddr_s3: DCDC_REG3 {
|
||
|
|
+ regulator-name = "vcc_ddr_s3";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-on-in-suspend;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
vcc1v8_sys_s3: DCDC_REG4 {
|
||
|
|
regulator-name = "vcc1v8_sys_s3";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-on-in-suspend;
|
||
|
|
+ regulator-suspend-microvolt = <1800000>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ /* not used */
|
||
|
|
+ vcc1v8_dvp: LDO_REG1 {
|
||
|
|
+ regulator-name = "vcc1v8_dvp";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ /* not used */
|
||
|
|
+ vcc3v0_touch: LDO_REG2 {
|
||
|
|
+ regulator-name = "vcc3v0_touch";
|
||
|
|
+ };
|
||
|
|
|
||
|
|
+ vcc1v8_s3: LDO_REG3 {
|
||
|
|
+ regulator-name = "vcc1v8_s3";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <1800000>;
|
||
|
|
+ regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <1800000>;
|
||
|
|
@@ -361,25 +568,61 @@ vcc_sdio_s0: LDO_REG4 {
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
-
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+ /* not used */
|
||
|
|
+ vcca3v0_codec: LDO_REG5 {
|
||
|
|
+ regulator-name = "vcca3v0_codec";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vcc1v5_s3: LDO_REG6 {
|
||
|
|
+ regulator-name = "vcc1v5_s3";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <1500000>;
|
||
|
|
+ regulator-max-microvolt = <1500000>;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-on-in-suspend;
|
||
|
|
+ regulator-suspend-microvolt = <1500000>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ /* not used */
|
||
|
|
+ vcca1v8_codec: LDO_REG7 {
|
||
|
|
+ regulator-name = "vcca1v8_codec";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
vcc3v0_s3: LDO_REG8 {
|
||
|
|
regulator-name = "vcc3v0_s3";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3000000>;
|
||
|
|
regulator-max-microvolt = <3000000>;
|
||
|
|
-
|
||
|
|
regulator-state-mem {
|
||
|
|
regulator-on-in-suspend;
|
||
|
|
regulator-suspend-microvolt = <3000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
+
|
||
|
|
+ vcc3v3_sys_s0: SWITCH_REG1 {
|
||
|
|
+ regulator-name = "vcc3v3_sys_s0";
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-min-microvolt = <3300000>;
|
||
|
|
+ regulator-max-microvolt = <3300000>;
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-off-in-suspend;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ /* not used */
|
||
|
|
+ vcc3v3_s0: SWITCH_REG2 {
|
||
|
|
+ regulator-name = "vcc3v3_s0";
|
||
|
|
+ };
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
@@ -387,12 +630,33 @@ vdd_cpu_b: regulator@40 {
|
||
|
|
compatible = "silergy,syr827";
|
||
|
|
reg = <0x40>;
|
||
|
|
fcs,suspend-voltage-selector = <1>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&vsel1_gpio>;
|
||
|
|
regulator-name = "vdd_cpu_b";
|
||
|
|
+ regulator-min-microvolt = <712500>;
|
||
|
|
+ regulator-max-microvolt = <1500000>;
|
||
|
|
+ regulator-ramp-delay = <40000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
+ vin-supply = <&vcc5v0_sys>;
|
||
|
|
+
|
||
|
|
+ regulator-state-mem {
|
||
|
|
+ regulator-off-in-suspend;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vdd_gpu: regulator@41 {
|
||
|
|
+ compatible = "silergy,syr828";
|
||
|
|
+ reg = <0x41>;
|
||
|
|
+ fcs,suspend-voltage-selector = <1>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&vsel2_gpio>;
|
||
|
|
+ regulator-name = "vdd_gpu";
|
||
|
|
regulator-min-microvolt = <712500>;
|
||
|
|
regulator-max-microvolt = <1500000>;
|
||
|
|
regulator-ramp-delay = <1000>;
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
|
||
|
|
regulator-state-mem {
|
||
|
|
@@ -407,56 +671,222 @@ &i2c2 {
|
||
|
|
i2c-scl-falling-time-ns = <30>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
+ gpio-expander@20 {
|
||
|
|
+ compatible = "nxp,pca9555";
|
||
|
|
+ reg = <0x20>;
|
||
|
|
+ gpio-controller;
|
||
|
|
+ #gpio-cells = <2>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&pca0_pins>;
|
||
|
|
+ interrupt-parent = <&gpio0>;
|
||
|
|
+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
+ interrupt-controller;
|
||
|
|
+ #interrupt-cells = <2>;
|
||
|
|
+ vcc-supply = <&vcc3v3_sys_s3>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
temp@4c {
|
||
|
|
- compatible = "national,lm75";
|
||
|
|
+ compatible = "onnn,lm75";
|
||
|
|
reg = <0x4c>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
-&io_domains {
|
||
|
|
- audio-supply = <&vcc1v8_sys_s0>;
|
||
|
|
- bt656-supply = <&vcc1v8_sys_s0>;
|
||
|
|
- gpio1830-supply = <&vcc3v0_s3>;
|
||
|
|
- sdmmc-supply = <&vcc_sdio_s0>;
|
||
|
|
+&i2c4 {
|
||
|
|
+ clock-frequency = <400000>;
|
||
|
|
+ i2c-scl-rising-time-ns = <160>;
|
||
|
|
+ i2c-scl-falling-time-ns = <30>;
|
||
|
|
+ status = "okay";
|
||
|
|
+
|
||
|
|
+ fusb0: typec-portc@22 {
|
||
|
|
+ compatible = "fcs,fusb302";
|
||
|
|
+ reg = <0x22>;
|
||
|
|
+ interrupt-parent = <&gpio1>;
|
||
|
|
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&fusb0_int>;
|
||
|
|
+ vbus-supply = <&vcc5v0_typec>;
|
||
|
|
+
|
||
|
|
+ connector {
|
||
|
|
+ compatible = "usb-c-connector";
|
||
|
|
+ label = "USB-C";
|
||
|
|
+ power-role = "dual";
|
||
|
|
+ data-role = "dual";
|
||
|
|
+ try-power-role = "sink";
|
||
|
|
+ source-pdos = <PDO_FIXED(5000, 1200, PDO_FIXED_USB_COMM)>;
|
||
|
|
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
|
||
|
|
+ op-sink-microwatt = <5000000>;
|
||
|
|
+
|
||
|
|
+ extcon-cables = <1 2 5 6 9 10 12 44>;
|
||
|
|
+ typec-altmodes = <0xff01 1 0x001c0000 1>;
|
||
|
|
+
|
||
|
|
+ ports {
|
||
|
|
+ #address-cells = <1>;
|
||
|
|
+ #size-cells = <0>;
|
||
|
|
+
|
||
|
|
+ port@0 {
|
||
|
|
+ reg = <0>;
|
||
|
|
+ usb_con_hs: endpoint {
|
||
|
|
+ remote-endpoint = <&u2phy0_typec_hs>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+ port@1 {
|
||
|
|
+ reg = <1>;
|
||
|
|
+ usb_con_ss: endpoint {
|
||
|
|
+ remote-endpoint = <&tcphy0_typec_ss>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+ port@2 {
|
||
|
|
+ reg = <2>;
|
||
|
|
+ usb_con_sbu: endpoint {
|
||
|
|
+ remote-endpoint = <&tcphy0_typec_dp>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+/* I2C on UEXT */
|
||
|
|
+&i2c7 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
-&pcie_phy {
|
||
|
|
+/* External I2C */
|
||
|
|
+&i2c8 {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&i2s2 {
|
||
|
|
+ #sound-dai-cells = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
+&io_domains {
|
||
|
|
+ status = "okay";
|
||
|
|
+ bt656-supply = <&vcc1v8_sys_s0>;
|
||
|
|
+ audio-supply = <&vcc1v8_sys_s0>;
|
||
|
|
+ sdmmc-supply = <&vcc_sdio_s0>;
|
||
|
|
+ gpio1830-supply = <&vcc3v0_s3>;
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&pcie0 {
|
||
|
|
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||
|
|
- max-link-speed = <2>;
|
||
|
|
num-lanes = <2>;
|
||
|
|
+ max-link-speed = <2>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
- status = "okay";
|
||
|
|
-
|
||
|
|
+ pinctrl-0 = <&pcie_prst &pcie_clkreqn_cpm>;
|
||
|
|
vpcie12v-supply = <&vcc12v_dcin>;
|
||
|
|
vpcie3v3-supply = <&pcie_power>;
|
||
|
|
vpcie1v8-supply = <&avdd_1v8_s0>;
|
||
|
|
vpcie0v9-supply = <&avdd_0v9_s0>;
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&pcie_phy {
|
||
|
|
+ status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl {
|
||
|
|
+ buttons {
|
||
|
|
+ pwrbtn: pwrbtn {
|
||
|
|
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ user1btn: usr1btn {
|
||
|
|
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ charger {
|
||
|
|
+ ac_present_ap: ac-present-ap {
|
||
|
|
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ charger_status: charger-status {
|
||
|
|
+ rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ fan {
|
||
|
|
+ fan1_sense: fan1-sense {
|
||
|
|
+ rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ fan2_sense: fan2-sense {
|
||
|
|
+ rockchip,pins = <4 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ fusb30x {
|
||
|
|
+ fusb0_int: fusb0-int {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ fusb0_vbus_en: fusb0-vbus-en {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
gmac {
|
||
|
|
- gphy_reset: gphy-reset {
|
||
|
|
- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
|
||
|
|
+ rgmii_phy_reset: rgmii-phy-reset {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
- sys_grn_led_on: sys-grn-led-on {
|
||
|
|
- rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ network_act: network-act {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ usb3_act: usb3-act {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_act: sata-act {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ system_led: sys-led {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>,
|
||
|
|
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ sata_err_led: sata-err-led {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>,
|
||
|
|
+ <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_down>,
|
||
|
|
+ <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>,
|
||
|
|
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>,
|
||
|
|
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ misc {
|
||
|
|
+ pca0_pins: pca0-pins {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- sys_red_led_on: sys-red-led-on {
|
||
|
|
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ wake_on_lan: wake-on-lan {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pcie {
|
||
|
|
- pcie_pwr: pcie-pwr {
|
||
|
|
+ pcie_prst: pcie-prst {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ pcie_pwr_en: pcie-pwr-en {
|
||
|
|
rockchip,pins =
|
||
|
|
<1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
@@ -464,31 +894,45 @@ pcie_pwr: pcie-pwr {
|
||
|
|
|
||
|
|
pmic {
|
||
|
|
pmic_int_l: pmic-int-l {
|
||
|
|
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vsel1_gpio: vsel1-gpio {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ vsel2_gpio: vsel2-gpio {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
- power {
|
||
|
|
- hdd_a_power_en: hdd-a-power-en {
|
||
|
|
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ power {
|
||
|
|
+ hdd_a_power: hdd-a-power {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- hdd_b_power_en: hdd-b-power-en {
|
||
|
|
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ hdd_b_power: hdd-b-power {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc5v0_usb_en: vcc5v0-usb-en {
|
||
|
|
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
- usb_lan_en: usb-lan-en {
|
||
|
|
- rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>;
|
||
|
|
};
|
||
|
|
- };
|
||
|
|
|
||
|
|
- vcc3v0-sd {
|
||
|
|
- sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||
|
|
- rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
+ usb_lan_en: usb-lan-en {
|
||
|
|
+ rockchip,pins =
|
||
|
|
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
@@ -499,28 +943,46 @@ &pmu_io_domains {
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm0 {
|
||
|
|
- /* pwm-fan on P7 */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm1 {
|
||
|
|
- /* pwm-fan on P6 */
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&pwm2 {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&pwm3 {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&saradc {
|
||
|
|
+ vref-supply = <&vcc1v8_s3>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdhci {
|
||
|
|
+ assigned-clock-rates = <150000000>;
|
||
|
|
bus-width = <8>;
|
||
|
|
mmc-hs200-1_8v;
|
||
|
|
+ // hs400 is broken on Helios64 since 5.10.60
|
||
|
|
+ // mmc-hs400-1_8v;
|
||
|
|
+ // mmc-hs400-enhanced-strobe;
|
||
|
|
+ supports-emmc;
|
||
|
|
non-removable;
|
||
|
|
- vqmmc-supply = <&vcc1v8_sys_s0>;
|
||
|
|
+ disable-wp;
|
||
|
|
status = "okay";
|
||
|
|
+ vqmmc-supply = <&vcc1v8_sys_s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdmmc {
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||
|
|
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; // TODO: verify what needs to be done to use implicit CD definition
|
||
|
|
disable-wp;
|
||
|
|
+ sd-uhs-sdr104;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||
|
|
vmmc-supply = <&vcc3v0_sd>;
|
||
|
|
@@ -530,14 +992,6 @@ &sdmmc {
|
||
|
|
|
||
|
|
&spi1 {
|
||
|
|
status = "okay";
|
||
|
|
-
|
||
|
|
- spiflash: flash@0 {
|
||
|
|
- compatible = "jedec,spi-nor";
|
||
|
|
- reg = <0x0>;
|
||
|
|
- spi-max-frequency = <25000000>;
|
||
|
|
- status = "okay";
|
||
|
|
- m25p,fast-read;
|
||
|
|
- };
|
||
|
|
};
|
||
|
|
|
||
|
|
/* UEXT connector */
|
||
|
|
@@ -549,8 +1003,28 @@ &spi5 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
+&tcphy0 {
|
||
|
|
+ extcon = <&fusb0>;
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&tcphy0_dp {
|
||
|
|
+ port {
|
||
|
|
+ tcphy0_typec_dp: endpoint {
|
||
|
|
+ remote-endpoint = <&usb_con_sbu>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&tcphy0_usb3 {
|
||
|
|
+ port {
|
||
|
|
+ tcphy0_typec_ss: endpoint {
|
||
|
|
+ remote-endpoint = <&usb_con_ss>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&tcphy1 {
|
||
|
|
- /* phy for &usbdrd_dwc3_1 */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
@@ -562,61 +1036,119 @@ &tsadc {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
-&u2phy1 {
|
||
|
|
+&u2phy0 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
- otg-port {
|
||
|
|
- /* phy for &usbdrd_dwc3_1 */
|
||
|
|
+ u2phy0_otg: otg-port {
|
||
|
|
+ status = "okay";
|
||
|
|
+ };
|
||
|
|
+
|
||
|
|
+ u2phy0_host: host-port {
|
||
|
|
phy-supply = <&vcc5v0_usb>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
+
|
||
|
|
+ port {
|
||
|
|
+ u2phy0_typec_hs: endpoint {
|
||
|
|
+ remote-endpoint = <&usb_con_hs>;
|
||
|
|
+ };
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&u2phy1 {
|
||
|
|
+ status = "okay";
|
||
|
|
+
|
||
|
|
+ u2phy1_otg: otg-port {
|
||
|
|
+ status = "okay";
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&uart0 {
|
||
|
|
+ pinctrl-names = "default";
|
||
|
|
+ pinctrl-0 = <&uart0_xfer>;
|
||
|
|
+ status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
+&usb_host0_ehci {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&usb_host0_ohci {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&usbdrd3_0 {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&usbdrd_dwc3_0 {
|
||
|
|
+ status = "okay";
|
||
|
|
+ dr_mode = "otg";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&usbdrd3_1 {
|
||
|
|
status = "okay";
|
||
|
|
+};
|
||
|
|
|
||
|
|
- usb@fe900000 {
|
||
|
|
- dr_mode = "host";
|
||
|
|
- status = "okay";
|
||
|
|
+&usbdrd_dwc3_1 {
|
||
|
|
+ status = "okay";
|
||
|
|
+ dr_mode = "host";
|
||
|
|
+
|
||
|
|
+ #address-cells = <1>;
|
||
|
|
+ #size-cells = <0>;
|
||
|
|
+
|
||
|
|
+ int_hub: hub@1 {
|
||
|
|
+ compatible = "usb2109,0815";
|
||
|
|
+ reg = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
- hub@1 {
|
||
|
|
- compatible = "usb2109,0815";
|
||
|
|
+ int_hub_port1: port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
- #address-cells = <1>;
|
||
|
|
- #size-cells = <0>;
|
||
|
|
+ #trigger-source-cells = <0>;
|
||
|
|
+ };
|
||
|
|
|
||
|
|
- port@1 {
|
||
|
|
- reg = <1>;
|
||
|
|
- #trigger-source-cells = <0>;
|
||
|
|
- };
|
||
|
|
+ int_hub_port2: port@2 {
|
||
|
|
+ reg = <2>;
|
||
|
|
+ #trigger-source-cells = <0>;
|
||
|
|
+ };
|
||
|
|
|
||
|
|
- port@2 {
|
||
|
|
- reg = <2>;
|
||
|
|
- #trigger-source-cells = <0>;
|
||
|
|
- };
|
||
|
|
+ int_hub_port3: port@3 {
|
||
|
|
+ reg = <3>;
|
||
|
|
+ #trigger-source-cells = <0>;
|
||
|
|
+ };
|
||
|
|
|
||
|
|
- port@3 {
|
||
|
|
- reg = <3>;
|
||
|
|
- #trigger-source-cells = <0>;
|
||
|
|
- };
|
||
|
|
+ usb_lan: device@4 {
|
||
|
|
+ compatible = "usbbda,8156";
|
||
|
|
+ reg = <4>;
|
||
|
|
|
||
|
|
- device@4 {
|
||
|
|
- compatible = "usbbda,8156";
|
||
|
|
- reg = <4>;
|
||
|
|
- #address-cells = <2>;
|
||
|
|
- #size-cells = <0>;
|
||
|
|
+ #address-cells = <2>;
|
||
|
|
+ #size-cells = <0>;
|
||
|
|
|
||
|
|
- interface@0 { /* interface 0 of configuration 1 */
|
||
|
|
- compatible = "usbbda,8156.config1.0";
|
||
|
|
- reg = <0 1>;
|
||
|
|
- };
|
||
|
|
+ interface@0 { /* interface 0 of configuration 1 */
|
||
|
|
+ compatible = "usbbda,8156.config1.0";
|
||
|
|
+ reg = <0 1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
+
|
||
|
|
+&vopb {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&vopb_mmu {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&vopl {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+&vopl_mmu {
|
||
|
|
+ status = "okay";
|
||
|
|
+};
|
||
|
|
\ No newline at end of file
|
||
|
|
--
|
||
|
|
Armbian
|
||
|
|
|