737 lines
14 KiB
Plaintext
737 lines
14 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
|
/*
|
||
|
|
* Copyright (c) 2020 Paolo Sabatino
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "dt-bindings/pwm/pwm.h"
|
||
|
|
#include "dt-bindings/input/input.h"
|
||
|
|
#include "rk3328.dtsi"
|
||
|
|
#include "rk3318-dram-default-timing.dtsi"
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "Rockchip RK3318 BOX";
|
||
|
|
compatible = "rockchip,rk3318-box", "rockchip,rk3328-box", "rockchip,rk3328";
|
||
|
|
|
||
|
|
aliases {
|
||
|
|
mmc0 = &sdmmc;
|
||
|
|
mmc1 = &sdio;
|
||
|
|
mmc2 = &emmc;
|
||
|
|
mmc3 = &sdmmc_ext;
|
||
|
|
mmc4 = &sdio_ext;
|
||
|
|
};
|
||
|
|
|
||
|
|
/delete-node/ opp-table-0;
|
||
|
|
/delete-node/ gpu-opp-table;
|
||
|
|
|
||
|
|
cpu0_opp_table: opp_table0 {
|
||
|
|
compatible = "operating-points-v2";
|
||
|
|
opp-shared;
|
||
|
|
|
||
|
|
opp-600000000 {
|
||
|
|
opp-hz = /bits/ 64 <600000000>;
|
||
|
|
opp-microvolt = <950000>;
|
||
|
|
clock-latency-ns = <40000>;
|
||
|
|
opp-suspend;
|
||
|
|
};
|
||
|
|
opp-816000000 {
|
||
|
|
opp-hz = /bits/ 64 <816000000>;
|
||
|
|
opp-microvolt = <1000000>;
|
||
|
|
clock-latency-ns = <40000>;
|
||
|
|
};
|
||
|
|
opp-1008000000 {
|
||
|
|
opp-hz = /bits/ 64 <1008000000>;
|
||
|
|
opp-microvolt = <1100000>;
|
||
|
|
clock-latency-ns = <40000>;
|
||
|
|
};
|
||
|
|
opp-1200000000 {
|
||
|
|
opp-hz = /bits/ 64 <1200000000>;
|
||
|
|
opp-microvolt = <1200000>;
|
||
|
|
clock-latency-ns = <40000>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
opp-1296000000 {
|
||
|
|
opp-hz = /bits/ 64 <1296000000>;
|
||
|
|
opp-microvolt = <1275000>;
|
||
|
|
clock-latency-ns = <40000>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpu_opp_table: gpu-opp-table {
|
||
|
|
compatible = "operating-points-v2";
|
||
|
|
|
||
|
|
opp-200000000 {
|
||
|
|
opp-hz = /bits/ 64 <200000000>;
|
||
|
|
opp-microvolt = <1000000 950000 1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
opp-300000000 {
|
||
|
|
opp-hz = /bits/ 64 <300000000>;
|
||
|
|
opp-microvolt = <1050000 950000 1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
opp-400000000 {
|
||
|
|
opp-hz = /bits/ 64 <400000000>;
|
||
|
|
opp-microvolt = <1050000 950000 1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
opp-500000000 {
|
||
|
|
opp-hz = /bits/ 64 <500000000>;
|
||
|
|
opp-microvolt = <1100000 950000 1200000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = "serial2:1500000n8";
|
||
|
|
};
|
||
|
|
|
||
|
|
adc_keys: adc-keys {
|
||
|
|
|
||
|
|
compatible = "adc-keys";
|
||
|
|
io-channels = <&saradc 0>;
|
||
|
|
io-channel-names = "buttons";
|
||
|
|
keyup-threshold-microvolt = <1800000>;
|
||
|
|
poll-interval = <100>;
|
||
|
|
|
||
|
|
recovery {
|
||
|
|
label = "recovery";
|
||
|
|
linux,code = <KEY_VENDOR>;
|
||
|
|
press-threshold-microvolt = <17000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
xin32k: xin32k {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <32768>;
|
||
|
|
clock-output-names = "xin32k";
|
||
|
|
#clock-cells = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gmac_clkin: gmac-clkin {
|
||
|
|
compatible = "fixed-clock";
|
||
|
|
clock-frequency = <125000000>;
|
||
|
|
clock-output-names = "gmac_clkin";
|
||
|
|
#clock-cells = <0x00>;
|
||
|
|
};
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
compatible = "simple-bus";
|
||
|
|
#address-cells = <0x01>;
|
||
|
|
#size-cells = <0x00>;
|
||
|
|
|
||
|
|
vcc_18: regulator@0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vccio_1v8";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_io: regulator@1 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vccio_3v3";
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_phy: vcc-phy-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc_phy";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_sys: vcc-sys {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vcc_sys";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vcc_sd: sdmmc-regulator {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sdmmc0m1_pin>;
|
||
|
|
regulator-name = "vcc_sd";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
vin-supply = <&vcc_io>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* USB3 vbus
|
||
|
|
*/
|
||
|
|
vcc_host_vbus: vcc-host-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&usb30_host_drv>;
|
||
|
|
regulator-name = "vcc_host_vbus";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
vin-supply = <&vcc_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* USB2 OTG vbus
|
||
|
|
*/
|
||
|
|
vcc_otg_vbus: vcc-otg-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
enable-active-high;
|
||
|
|
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&usb20_host_drv>;
|
||
|
|
regulator-name = "vcc_otg_vbus";
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
vin-supply = <&vcc_sys>;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_arm: vdd-arm {
|
||
|
|
compatible = "pwm-regulator";
|
||
|
|
pwms = <&pwm0 0 5000 PWM_POLARITY_INVERTED>;
|
||
|
|
pwm-supply = <&vcc_sys>;
|
||
|
|
regulator-name = "vdd_arm";
|
||
|
|
regulator-min-microvolt = <950000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-settling-time-up-us = <250>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_logic: vdd-log {
|
||
|
|
compatible = "pwm-regulator";
|
||
|
|
pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
|
||
|
|
pwm-supply = <&vcc_sys>;
|
||
|
|
regulator-name = "vdd_log";
|
||
|
|
regulator-min-microvolt = <900000>;
|
||
|
|
regulator-max-microvolt = <1300000>;
|
||
|
|
regulator-ramp-delay = <12500>;
|
||
|
|
regulator-settling-time-up-us = <250>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_led: gpio-leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&working_led>;
|
||
|
|
|
||
|
|
working {
|
||
|
|
gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "timer";
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
ir-receiver {
|
||
|
|
compatible = "gpio-ir-receiver";
|
||
|
|
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-0 = <&ir_int>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
};
|
||
|
|
|
||
|
|
sdio_pwrseq: sdio-pwrseq {
|
||
|
|
compatible = "mmc-pwrseq-simple";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&wifi_enable_h>;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* On the module itself this is one of these (depending
|
||
|
|
* on the actual card populated):
|
||
|
|
* - SDIO_RESET_L_WL_REG_ON
|
||
|
|
* - PDN (power down when low)
|
||
|
|
*/
|
||
|
|
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
wireless-bluetooth {
|
||
|
|
compatible = "bluetooth-platdata";
|
||
|
|
uart_rts_gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
|
||
|
|
pinctrl-names = "default", "rts_gpio";
|
||
|
|
pinctrl-0 = <&uart0_rts>;
|
||
|
|
pinctrl-1 = <&uart0_rts_gpio>;
|
||
|
|
BT,power_gpio = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||
|
|
BT,wake_host_irq = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
wireless-wlan {
|
||
|
|
compatible = "wlan-platdata";
|
||
|
|
rockchip,grf = <&grf>;
|
||
|
|
wifi_chip_type = "ap6330";
|
||
|
|
sdio_vref = <1800>;
|
||
|
|
WIFI,host_wake_irq = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
*/
|
||
|
|
|
||
|
|
fd628_dev {
|
||
|
|
compatible = "fd628_dev";
|
||
|
|
fd628_gpio_clk = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||
|
|
fd628_gpio_dat = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
analog-sound {
|
||
|
|
compatible = "simple-audio-card";
|
||
|
|
simple-audio-card,format = "i2s";
|
||
|
|
simple-audio-card,mclk-fs = <256>;
|
||
|
|
simple-audio-card,name = "ANALOG";
|
||
|
|
|
||
|
|
simple-audio-card,cpu {
|
||
|
|
sound-dai = <&i2s1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
simple-audio-card,codec {
|
||
|
|
sound-dai = <&codec>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi-sound {
|
||
|
|
compatible = "simple-audio-card";
|
||
|
|
simple-audio-card,format = "i2s";
|
||
|
|
simple-audio-card,mclk-fs = <128>;
|
||
|
|
simple-audio-card,name = "HDMI";
|
||
|
|
|
||
|
|
simple-audio-card,cpu {
|
||
|
|
sound-dai = <&i2s0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
simple-audio-card,codec {
|
||
|
|
sound-dai = <&hdmi>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* This node is a duplicate of sdmmc_ext: most common board do not use sdmmc_ext
|
||
|
|
* controller, so it is left unused. Some other boards use it as sdio controller
|
||
|
|
* for wifi and some others use it as sdcard controller.
|
||
|
|
* To handle the most critical situation, the controller will be configured as
|
||
|
|
* sdcard controller by default. An overlay can be set to disable the sdmmc_ext
|
||
|
|
* node and enable this sdio_ext in case wifi chips are attached to this.
|
||
|
|
*/
|
||
|
|
sdio_ext: mmc@ff5f0000 {
|
||
|
|
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
||
|
|
reg = <0x0 0xff5f0000 0x0 0x4000>;
|
||
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
|
||
|
|
<&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
|
||
|
|
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||
|
|
fifo-depth = <0x100>;
|
||
|
|
max-frequency = <150000000>;
|
||
|
|
resets = <&cru SRST_SDMMCEXT>;
|
||
|
|
reset-names = "reset";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
cap-sdio-irq;
|
||
|
|
disable-wp;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
mmc-pwrseq = <>;
|
||
|
|
non-removable;
|
||
|
|
num-slots = <1>;
|
||
|
|
pinctrl-0 = <&sdmmc0ext_cmd &sdmmc0ext_clk &sdmmc0ext_bus4>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
supports-sdio;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
&dfi {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&dmc {
|
||
|
|
center-supply = <&vdd_logic>;
|
||
|
|
ddr_timing = <&ddr_timing>;
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&codec {
|
||
|
|
status = "okay";
|
||
|
|
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu0 {
|
||
|
|
cpu-supply = <&vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu1 {
|
||
|
|
cpu-supply = <&vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu2 {
|
||
|
|
cpu-supply = <&vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpu3 {
|
||
|
|
cpu-supply = <&vdd_arm>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&display_subsystem {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&emmc {
|
||
|
|
|
||
|
|
supports-emmc;
|
||
|
|
no-sdio;
|
||
|
|
no-sd;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
disable-wp;
|
||
|
|
non-removable;
|
||
|
|
bus-width = <8>;
|
||
|
|
num-slots = <0x01>;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||
|
|
|
||
|
|
vmmc-supply = <&vcc_io>;
|
||
|
|
vqmmc-supply = <&vcc_18>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdmmc {
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
card-detect-delay = <500>;
|
||
|
|
cd-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
|
||
|
|
disable-wp;
|
||
|
|
no-sdio;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
||
|
|
supports-sd;
|
||
|
|
status = "okay";
|
||
|
|
vmmc-supply = <&vcc_sd>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sdio {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
cap-sdio-irq;
|
||
|
|
disable-wp;
|
||
|
|
keep-power-in-suspend;
|
||
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
||
|
|
non-removable;
|
||
|
|
num-slots = <1>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||
|
|
supports-sdio;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* sdmmc_ext is configured as sdcard controller and enabled by default.
|
||
|
|
* In this way boards which have the sdcard attached to sdmmc_ext will work
|
||
|
|
* by default. In case the controller is not attached to anything, the
|
||
|
|
* kernel will just autodetect and give up.
|
||
|
|
*/
|
||
|
|
&sdmmc_ext {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
bus-width = <4>;
|
||
|
|
cap-mmc-highspeed;
|
||
|
|
cap-sd-highspeed;
|
||
|
|
card-detect-delay = <500>;
|
||
|
|
cd-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||
|
|
disable-wp;
|
||
|
|
no-sdio;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_dectn &sdmmc0ext_bus4>;
|
||
|
|
supports-sd;
|
||
|
|
status = "okay";
|
||
|
|
vmmc-supply = <&vcc_sd>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&gmac2phy {
|
||
|
|
phy-supply = <&vcc_phy>;
|
||
|
|
|
||
|
|
phy-mode = "rmii";
|
||
|
|
|
||
|
|
clock_in_out = "output";
|
||
|
|
assigned-clocks = <&cru SCLK_MAC2PHY>;
|
||
|
|
assigned-clock-rate = <50000000>;
|
||
|
|
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
|
||
|
|
tx_delay = <0x30>;
|
||
|
|
rx_delay = <0x10>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpu {
|
||
|
|
status = "okay";
|
||
|
|
mali-supply = <&vdd_logic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
&h265e {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
*/
|
||
|
|
|
||
|
|
&h265e_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spdif {
|
||
|
|
pinctrl-0 = <&spdifm0_tx>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spdif_out {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&spdif_sound {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmiphy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2s0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2s1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&io_domains {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vccio1-supply = <&vcc_io>;
|
||
|
|
vccio2-supply = <&vcc_18>;
|
||
|
|
vccio3-supply = <&vcc_io>;
|
||
|
|
vccio4-supply = <&vcc_18>;
|
||
|
|
vccio5-supply = <&vcc_io>;
|
||
|
|
vccio6-supply = <&vcc_io>;
|
||
|
|
pmuio-supply = <&vcc_io>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&pinctrl {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&clk_32k_out>;
|
||
|
|
|
||
|
|
clk_32k {
|
||
|
|
clk_32k_out: clk-32k-out {
|
||
|
|
rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
working_led: working-led {
|
||
|
|
rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none_2ma>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
ir {
|
||
|
|
ir_int: ir-int {
|
||
|
|
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pmic {
|
||
|
|
pmic_int_l: pmic-int-l {
|
||
|
|
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sdio-pwrseq {
|
||
|
|
wifi_enable_h: wifi-enable-h {
|
||
|
|
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none_4ma>;/*,
|
||
|
|
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none_4ma>;*/
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usb2 {
|
||
|
|
usb20_host_drv: usb20-host-drv {
|
||
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usb3 {
|
||
|
|
usb30_host_drv: usb30-host-drv {
|
||
|
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
wireless-wlan {
|
||
|
|
|
||
|
|
/*
|
||
|
|
* SDIO host wake interrupt on YX_RK3328 board (sdio is attached to
|
||
|
|
* regular mmc controller mmc@ff510000)
|
||
|
|
*/
|
||
|
|
sdio_host_wake: sdio-host-wake {
|
||
|
|
rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* SDIO host wake interrupt on X88_PRO_B board (sdio is attached to
|
||
|
|
* alternative mmc controller mmc@ff5f0000)
|
||
|
|
*/
|
||
|
|
sdio_host_wake_ext: sdio-host-wake-ext {
|
||
|
|
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
&vdec {
|
||
|
|
status = "okay";
|
||
|
|
vcodec-supply = <&vdd_logic>;
|
||
|
|
};
|
||
|
|
*/
|
||
|
|
|
||
|
|
&vdec_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&threshold {
|
||
|
|
temperature = <80000>; /* millicelsius */
|
||
|
|
};
|
||
|
|
|
||
|
|
&target {
|
||
|
|
temperature = <95000>; /* millicelsius */
|
||
|
|
};
|
||
|
|
|
||
|
|
&soc_crit {
|
||
|
|
temperature = <100000>; /* millicelsius */
|
||
|
|
};
|
||
|
|
|
||
|
|
&tsadc {
|
||
|
|
rockchip,hw-tshut-mode = <0>;
|
||
|
|
rockchip,hw-tshut-polarity = <0>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart0 {
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
/delete-property/ dmas;
|
||
|
|
/delete-property/ dma-names;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&u2phy {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
u2phy_host: host-port {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
u2phy_otg: otg-port {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb20_otg {
|
||
|
|
dr_mode = "host";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_ehci {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_host0_ohci {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbdrd3 {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
dr_mode = "host";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&vop {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&vop_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&vpu {
|
||
|
|
status = "okay";
|
||
|
|
vcodec-supply = <&vdd_logic>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&vpu_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
&vepu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
*/
|
||
|
|
|
||
|
|
&vepu_mmu {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&saradc {
|
||
|
|
vref-supply = <&vcc_18>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
&rga {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
*/
|
||
|
|
|
||
|
|
&pwm0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi_sound {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&analog_sound {
|
||
|
|
status = "okay";
|
||
|
|
};
|