890 lines
17 KiB
Plaintext
890 lines
17 KiB
Plaintext
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||
|
// Copyright (c) 2022 AmadeusGhost <amadeus@jmu.edu.cn>
|
||
|
// Copyright (c) 2023 amazingfate <liujianfeng1994@gmail.com>
|
||
|
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/leds/common.h>
|
||
|
#include <dt-bindings/input/input.h>
|
||
|
#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
||
|
#include "rk3568.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "HINLINK H68K";
|
||
|
compatible = "hinlink,h68k", "rockchip,rk3568";
|
||
|
|
||
|
aliases {
|
||
|
ethernet0 = &gmac0;
|
||
|
ethernet1 = &gmac1;
|
||
|
mmc0 = &sdhci;
|
||
|
mmc1 = &sdmmc0;
|
||
|
|
||
|
led-boot = &led_work;
|
||
|
led-failsafe = &led_work;
|
||
|
led-running = &led_work;
|
||
|
led-upgrade = &led_work;
|
||
|
};
|
||
|
|
||
|
chosen: chosen {
|
||
|
stdout-path = "serial2:1500000n8";
|
||
|
};
|
||
|
|
||
|
hdmi-con {
|
||
|
compatible = "hdmi-connector";
|
||
|
type = "a";
|
||
|
|
||
|
port {
|
||
|
hdmi_con_in: endpoint {
|
||
|
remote-endpoint = <&hdmi_out_con>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
keys {
|
||
|
compatible = "gpio-keys";
|
||
|
pinctrl-0 = <&reset_button_pin>;
|
||
|
pinctrl-names = "default";
|
||
|
|
||
|
reset {
|
||
|
label = "reset";
|
||
|
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||
|
linux,code = <KEY_RESTART>;
|
||
|
debounce-interval = <50>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
compatible = "gpio-leds";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&led_net_en>, <&led_sata_en>, <&led_work_en>;
|
||
|
|
||
|
led_net: net {
|
||
|
label = "blue:net";
|
||
|
gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
led_sata: sata {
|
||
|
label = "amber:sata";
|
||
|
gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
led_work: work {
|
||
|
label = "green:work";
|
||
|
gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
dc_12v: dc-12v-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "dc_12v";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <12000000>;
|
||
|
regulator-max-microvolt = <12000000>;
|
||
|
};
|
||
|
|
||
|
vcc5v0_sys: vcc5v0-sys-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vcc5v0_sys";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
vin-supply = <&dc_12v>;
|
||
|
};
|
||
|
|
||
|
vcc3v3_sys: vcc3v3-sys-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vcc3v3_sys";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
|
||
|
enable-active-high;
|
||
|
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&vcc3v3_sys_en>;
|
||
|
|
||
|
vin-supply = <&vcc5v0_sys>;
|
||
|
};
|
||
|
|
||
|
/* wifi power
|
||
|
for H68K-MAX & H69K-MAX
|
||
|
*/
|
||
|
vcc3v3_pcie2: vcc3v3-pcie2-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc3v3_pcie2";
|
||
|
regulator-boot-on;
|
||
|
|
||
|
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&vcc3v3_pcie2_en>;
|
||
|
vin-supply = <&vcc3v3_sys>;
|
||
|
};
|
||
|
|
||
|
/* eth 2.5g power
|
||
|
for H66K H69K
|
||
|
*/
|
||
|
vcc3v3_pcie3: vcc3v3-pcie3-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-name = "vcc3v3_pcie3";
|
||
|
regulator-boot-on;
|
||
|
|
||
|
enable-active-high;
|
||
|
gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&vcc3v3_pcie3_en>;
|
||
|
vin-supply = <&vcc3v3_sys>;
|
||
|
};
|
||
|
|
||
|
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
|
||
|
regulator-name = "vcc5v0_usb_otg";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
|
||
|
enable-active-high;
|
||
|
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||
|
|
||
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
||
|
};
|
||
|
|
||
|
vcc3v3_sd_pwren: vcc3v3-sd-pwren-regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
|
||
|
regulator-name = "vcc3v3_sd_pwren";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
|
||
|
enable-active-high;
|
||
|
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; /* SD_PWREN */
|
||
|
vin-supply = <&vcc3v3_sys>;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&vcc3v3_sd_en>;
|
||
|
};
|
||
|
|
||
|
rk809-sound {
|
||
|
compatible = "simple-audio-card";
|
||
|
simple-audio-card,format = "i2s";
|
||
|
simple-audio-card,name = "Analog RK809";
|
||
|
simple-audio-card,mclk-fs = <256>;
|
||
|
|
||
|
simple-audio-card,cpu {
|
||
|
sound-dai = <&i2s1_8ch>;
|
||
|
};
|
||
|
simple-audio-card,codec {
|
||
|
sound-dai = <&rk809>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
fan: pwm-fan {
|
||
|
compatible = "pwm-fan";
|
||
|
cooling-levels = <0 127 163 255>;
|
||
|
#cooling-cells = <2>;
|
||
|
fan-supply = <&vcc5v0_sys>;
|
||
|
pwms = <&pwm0 0 50000 0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&combphy0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&combphy1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&combphy2 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&cpu0 {
|
||
|
cpu-supply = <&vdd_cpu>;
|
||
|
};
|
||
|
|
||
|
&cpu1 {
|
||
|
cpu-supply = <&vdd_cpu>;
|
||
|
};
|
||
|
|
||
|
&cpu2 {
|
||
|
cpu-supply = <&vdd_cpu>;
|
||
|
};
|
||
|
|
||
|
&cpu3 {
|
||
|
cpu-supply = <&vdd_cpu>;
|
||
|
};
|
||
|
|
||
|
&cpu_thermal {
|
||
|
trips {
|
||
|
cpu_cool: cpu_cool {
|
||
|
temperature = <45000>;
|
||
|
hysteresis = <2000>;
|
||
|
type = "active";
|
||
|
};
|
||
|
|
||
|
cpu_warm: cpu_warm {
|
||
|
temperature = <55000>;
|
||
|
hysteresis = <2000>;
|
||
|
type = "active";
|
||
|
};
|
||
|
|
||
|
cpu_hot: cpu_hot {
|
||
|
temperature = <65000>;
|
||
|
hysteresis = <2000>;
|
||
|
type = "active";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
cooling-maps {
|
||
|
map1 {
|
||
|
trip = <&cpu_cool>;
|
||
|
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||
|
};
|
||
|
|
||
|
map2 {
|
||
|
trip = <&cpu_warm>;
|
||
|
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||
|
};
|
||
|
|
||
|
map3 {
|
||
|
trip = <&cpu_hot>;
|
||
|
cooling-device = <&fan 3 THERMAL_NO_LIMIT>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&gmac0 {
|
||
|
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||
|
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||
|
assigned-clock-rates = <0>, <125000000>;
|
||
|
clock_in_out = "input";
|
||
|
phy-mode = "rgmii-id";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&gmac0_miim
|
||
|
&gmac0_tx_bus2
|
||
|
&gmac0_rx_bus2
|
||
|
&gmac0_rgmii_clk
|
||
|
&gmac0_rgmii_bus>;
|
||
|
snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
|
||
|
snps,reset-active-low;
|
||
|
snps,reset-delays-us = <0 50000 200000>;
|
||
|
tx_delay = <0x3c>;
|
||
|
rx_delay = <0x2f>;
|
||
|
phy-handle = <&rgmii_phy0>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&gmac1 {
|
||
|
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||
|
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||
|
assigned-clock-rates = <0>, <125000000>;
|
||
|
clock_in_out = "input";
|
||
|
phy-mode = "rgmii-id";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&gmac1m1_miim
|
||
|
&gmac1m1_tx_bus2
|
||
|
&gmac1m1_rx_bus2
|
||
|
&gmac1m1_rgmii_clk
|
||
|
&gmac1m1_rgmii_bus>;
|
||
|
snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
|
||
|
snps,reset-active-low;
|
||
|
snps,reset-delays-us = <0 50000 200000>;
|
||
|
tx_delay = <0x3c>;
|
||
|
rx_delay = <0x2f>;
|
||
|
phy-handle = <&rgmii_phy1>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&gpu {
|
||
|
mali-supply = <&vdd_gpu>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&hdmi {
|
||
|
avdd-0v9-supply = <&vdda0v9_image>;
|
||
|
avdd-1v8-supply = <&vcca1v8_image>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&hdmi_in {
|
||
|
hdmi_in_vp0: endpoint {
|
||
|
remote-endpoint = <&vp0_out_hdmi>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&hdmi_out {
|
||
|
hdmi_out_con: endpoint {
|
||
|
remote-endpoint = <&hdmi_con_in>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&hdmi_sound {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c0 {
|
||
|
status = "okay";
|
||
|
|
||
|
vdd_cpu: regulator@1c {
|
||
|
compatible = "tcs,tcs4525";
|
||
|
reg = <0x1c>;
|
||
|
fcs,suspend-voltage-selector = <1>;
|
||
|
regulator-name = "vdd_cpu";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <800000>;
|
||
|
regulator-max-microvolt = <1150000>;
|
||
|
regulator-ramp-delay = <2300>;
|
||
|
vin-supply = <&vcc5v0_sys>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
rk809: pmic@20 {
|
||
|
compatible = "rockchip,rk809";
|
||
|
reg = <0x20>;
|
||
|
|
||
|
interrupt-parent = <&gpio0>;
|
||
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
||
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||
|
#sound-dai-cells = <0>;
|
||
|
|
||
|
#clock-cells = <1>;
|
||
|
clock-names = "mclk";
|
||
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
|
||
|
|
||
|
rockchip,system-power-controller;
|
||
|
wakeup-source;
|
||
|
|
||
|
vcc1-supply = <&vcc3v3_sys>;
|
||
|
vcc2-supply = <&vcc3v3_sys>;
|
||
|
vcc3-supply = <&vcc3v3_sys>;
|
||
|
vcc4-supply = <&vcc3v3_sys>;
|
||
|
vcc5-supply = <&vcc3v3_sys>;
|
||
|
vcc6-supply = <&vcc3v3_sys>;
|
||
|
vcc7-supply = <&vcc3v3_sys>;
|
||
|
vcc8-supply = <&vcc3v3_sys>;
|
||
|
vcc9-supply = <&vcc3v3_sys>;
|
||
|
|
||
|
pwrkey {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
pinctrl_rk8xx: pinctrl_rk8xx {
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
|
||
|
rk817_slppin_null: rk817_slppin_null {
|
||
|
pins = "gpio_slp";
|
||
|
function = "pin_fun0";
|
||
|
};
|
||
|
|
||
|
rk817_slppin_slp: rk817_slppin_slp {
|
||
|
pins = "gpio_slp";
|
||
|
function = "pin_fun1";
|
||
|
};
|
||
|
|
||
|
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
|
||
|
pins = "gpio_slp";
|
||
|
function = "pin_fun2";
|
||
|
};
|
||
|
|
||
|
rk817_slppin_rst: rk817_slppin_rst {
|
||
|
pins = "gpio_slp";
|
||
|
function = "pin_fun3";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
regulators {
|
||
|
vdd_logic: DCDC_REG1 {
|
||
|
regulator-name = "vdd_logic";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-init-microvolt = <900000>;
|
||
|
regulator-initial-mode = <0x2>;
|
||
|
regulator-min-microvolt = <500000>;
|
||
|
regulator-max-microvolt = <1350000>;
|
||
|
regulator-ramp-delay = <6001>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vdd_gpu: DCDC_REG2 {
|
||
|
regulator-name = "vdd_gpu";
|
||
|
regulator-always-on;
|
||
|
regulator-init-microvolt = <900000>;
|
||
|
regulator-initial-mode = <0x2>;
|
||
|
regulator-min-microvolt = <500000>;
|
||
|
regulator-max-microvolt = <1350000>;
|
||
|
regulator-ramp-delay = <6001>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc_ddr: DCDC_REG3 {
|
||
|
regulator-name = "vcc_ddr";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-initial-mode = <0x2>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-on-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vdd_npu: DCDC_REG4 {
|
||
|
regulator-name = "vdd_npu";
|
||
|
regulator-init-microvolt = <900000>;
|
||
|
regulator-initial-mode = <0x2>;
|
||
|
regulator-min-microvolt = <500000>;
|
||
|
regulator-max-microvolt = <1350000>;
|
||
|
regulator-ramp-delay = <6001>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc_1v8: DCDC_REG5 {
|
||
|
regulator-name = "vcc_1v8";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vdda0v9_image: LDO_REG1 {
|
||
|
regulator-name = "vdda0v9_image";
|
||
|
regulator-min-microvolt = <900000>;
|
||
|
regulator-max-microvolt = <900000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vdda_0v9: LDO_REG2 {
|
||
|
regulator-name = "vdda_0v9";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <900000>;
|
||
|
regulator-max-microvolt = <900000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vdda0v9_pmu: LDO_REG3 {
|
||
|
regulator-name = "vdda0v9_pmu";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <900000>;
|
||
|
regulator-max-microvolt = <900000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-on-in-suspend;
|
||
|
regulator-suspend-microvolt = <900000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vccio_acodec: LDO_REG4 {
|
||
|
regulator-name = "vccio_acodec";
|
||
|
regulator-always-on;
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vccio_sd: LDO_REG5 {
|
||
|
regulator-name = "vccio_sd";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc3v3_pmu: LDO_REG6 {
|
||
|
regulator-name = "vcc3v3_pmu";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-on-in-suspend;
|
||
|
regulator-suspend-microvolt = <3300000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcca_1v8: LDO_REG7 {
|
||
|
regulator-name = "vcca_1v8";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcca1v8_pmu: LDO_REG8 {
|
||
|
regulator-name = "vcca1v8_pmu";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-on-in-suspend;
|
||
|
regulator-suspend-microvolt = <1800000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcca1v8_image: LDO_REG9 {
|
||
|
regulator-name = "vcca1v8_image";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc_3v3: SWITCH_REG1 {
|
||
|
regulator-name = "vcc_3v3";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc3v3_sd: SWITCH_REG2 {
|
||
|
regulator-name = "vcc3v3_sd";
|
||
|
|
||
|
regulator-state-mem {
|
||
|
regulator-off-in-suspend;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
rk809_codec: codec {
|
||
|
#sound-dai-cells = <0>;
|
||
|
compatible = "rockchip,rk809-codec", "rockchip,rk817-codec";
|
||
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||
|
clock-names = "mclk";
|
||
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2s1m0_mclk>;
|
||
|
hp-volume = <20>;
|
||
|
spk-volume = <3>;
|
||
|
mic-in-differential;
|
||
|
status = "okay";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c5 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2s0_8ch {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2s1_8ch {
|
||
|
rockchip,trcm-sync-tx-only;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&mdio0 {
|
||
|
rgmii_phy0: ethernet-phy@0 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
phy-supply = <&vcc3v3_sys>;
|
||
|
reg = <0x0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&mdio1 {
|
||
|
rgmii_phy1: ethernet-phy@0 {
|
||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||
|
phy-supply = <&vcc3v3_sys>;
|
||
|
reg = <0x0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pcie2x1 {
|
||
|
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||
|
vpcie3v3-supply = <&vcc3v3_pcie2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pcie30phy {
|
||
|
data-lanes = <1 2>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pcie3x1 {
|
||
|
num-lanes = <1>;
|
||
|
reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||
|
vpcie3v3-supply = <&vcc3v3_pcie3>;
|
||
|
status = "okay";
|
||
|
|
||
|
pcie@0,0 {
|
||
|
reg = <0x00100000 0 0 0 0>;
|
||
|
#address-cells = <3>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
rtl8125_1: pcie-eth@10,0 {
|
||
|
compatible = "pci10ec,8125";
|
||
|
reg = <0x000000 0 0 0 0>;
|
||
|
realtek,led-data = <0x0200>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pcie3x2 {
|
||
|
num-lanes = <1>;
|
||
|
rockchip,init-delay-ms = <100>;
|
||
|
reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||
|
vpcie3v3-supply = <&vcc3v3_pcie3>;
|
||
|
status = "okay";
|
||
|
|
||
|
pcie@0,0 {
|
||
|
reg = <0x00200000 0 0 0 0>;
|
||
|
#address-cells = <3>;
|
||
|
#size-cells = <2>;
|
||
|
|
||
|
rtl8125_2: pcie-eth@20,0 {
|
||
|
compatible = "pci10ec,8125";
|
||
|
reg = <0x000000 0 0 0 0>;
|
||
|
realtek,led-data = <0x0200>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pinctrl {
|
||
|
button {
|
||
|
reset_button_pin: reset-button-pin {
|
||
|
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
led_work_en: led-work-en {
|
||
|
rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
|
||
|
led_sata_en: led-user-en {
|
||
|
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
|
||
|
led_net_en: led-net-en {
|
||
|
rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
vcc {
|
||
|
vcc3v3_sys_en: vcc3v3-sys-en {
|
||
|
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pmic {
|
||
|
pmic_int: pmic-int {
|
||
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
usb {
|
||
|
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
||
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
sd {
|
||
|
vcc3v3_sd_en: vcc3v3-sd_en {
|
||
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pcie {
|
||
|
vcc3v3_pcie2_en: vcc3v3_pcie2_en {
|
||
|
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
|
||
|
vcc3v3_pcie3_en: vcc3v3_pcie3_en {
|
||
|
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&pmu_io_domains {
|
||
|
pmuio1-supply = <&vcc3v3_pmu>;
|
||
|
pmuio2-supply = <&vcc3v3_pmu>;
|
||
|
vccio1-supply = <&vccio_acodec>;
|
||
|
vccio2-supply = <&vcc_1v8>;
|
||
|
vccio3-supply = <&vccio_sd>;
|
||
|
vccio4-supply = <&vcc_1v8>;
|
||
|
vccio5-supply = <&vcc_3v3>;
|
||
|
vccio6-supply = <&vcc_1v8>;
|
||
|
vccio7-supply = <&vcc_3v3>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&pwm0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&saradc {
|
||
|
vref-supply = <&vcca_1v8>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sata0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sdhci {
|
||
|
bus-width = <8>;
|
||
|
max-frequency = <200000000>;
|
||
|
non-removable;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sdmmc0 {
|
||
|
bus-width = <4>;
|
||
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||
|
|
||
|
cap-sd-highspeed;
|
||
|
max-frequency = <50000000>;
|
||
|
disable-wp;
|
||
|
|
||
|
vmmc-supply = <&vcc3v3_sd_pwren>;
|
||
|
vqmmc-supply = <&vccio_sd>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&tsadc {
|
||
|
rockchip,hw-tshut-mode = <1>;
|
||
|
rockchip,hw-tshut-polarity = <0>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&uart2 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_host0_ehci {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_host0_ohci {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_host0_xhci {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&usb_host1_ehci {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_host1_ohci {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb_host1_xhci {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy0 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy0_host {
|
||
|
phy-supply = <&vcc5v0_usb_otg>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy0_otg {
|
||
|
phy-supply = <&vcc5v0_usb_otg>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy1 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy1_host {
|
||
|
phy-supply = <&vcc5v0_usb_otg>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&usb2phy1_otg {
|
||
|
phy-supply = <&vcc5v0_usb_otg>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&vop {
|
||
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&vop_mmu {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&vp0 {
|
||
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
||
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
||
|
remote-endpoint = <&hdmi_in_vp0>;
|
||
|
};
|
||
|
};
|