aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c97506efcc
build/patch/kernel/archive/sunxi-5.10/check/0000-sound-soc-ac100-codec-Initial-implementation.patch.disabled

347 lines
11 KiB
Plaintext
Raw Normal View History

添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
2023-09-19 11:24:52 +08:00
From 6eb4890e1b83490864f18d3926182069e54a4dfb Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Sun, 12 Nov 2017 23:09:14 +0100
Subject: [PATCH] sound: soc: ac100-codec: Initial implementation
This driver provides AC100 codec controls.
Note: This does not yet provide anything, it's just a skeleton
for a future driver.
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
sound/soc/sunxi/Kconfig | 11 ++
sound/soc/sunxi/Makefile | 1 +
sound/soc/sunxi/ac100-codec.c | 291 ++++++++++++++++++++++++++++++++++
3 files changed, 303 insertions(+)
create mode 100644 sound/soc/sunxi/ac100-codec.c
diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig
index 22408bc2d6ec6..e276cc94a8c5e 100644
--- a/sound/soc/sunxi/Kconfig
+++ b/sound/soc/sunxi/Kconfig
@@ -20,6 +20,17 @@ config SND_SUN8I_CODEC
Say Y or M if you want to add sun8i digital audio codec support.
+config SND_AC100_CODEC
+ tristate "Allwinner (X-Powers) AC100 audio codec"
+ depends on OF
+ depends on MACH_SUN8I || COMPILE_TEST
+ select REGMAP_MMIO
+ help
+ This option enables the audio codec support for Allwinner (X-Powers)
+ AC100 chip.
+
+ Say Y or M if you want to add AC100 audio codec support.
+
config SND_SUN8I_CODEC_ANALOG
tristate "Allwinner sun8i Codec Analog Controls Support"
depends on MACH_SUN8I || (ARM64 && ARCH_SUNXI) || COMPILE_TEST
diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile
index 4a9ef67386caf..83461fdbfaa2a 100644
--- a/sound/soc/sunxi/Makefile
+++ b/sound/soc/sunxi/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_SND_SUN4I_I2S) += sun4i-i2s.o
obj-$(CONFIG_SND_SUN4I_SPDIF) += sun4i-spdif.o
obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) += sun8i-codec-analog.o
obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
+obj-$(CONFIG_SND_AC100_CODEC) += ac100-codec.o
diff --git a/sound/soc/sunxi/ac100-codec.c b/sound/soc/sunxi/ac100-codec.c
new file mode 100644
index 0000000000000..d5438815be754
--- /dev/null
+++ b/sound/soc/sunxi/ac100-codec.c
@@ -0,0 +1,291 @@
+/*
+ * This driver supports the controls for X-Powers (Allwinner)
+ * AC100 audio codec. This codec is co-packaged with AXP81x PMICs.
+ *
+ * (C) Copyright 2017 Ondrej Jirman <megous@megous.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/mfd/ac100.h>
+
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/soc-dapm.h>
+
+/*
+ * Reasearch
+ * ---------
+ *
+ * Features:
+ * 2 A/D
+ * 2 D/A
+ * 2 I2S/PCM #1 and #2
+ * 1 PCM mono #3 muxable with I2S #2
+ * 3 mic inputs (mic #2 and #3 exclusively muxable at input)
+ * 1 line in (directly or through amp)
+ * 1 aux input
+ * all input signals mixable directly into output (bypass AD/DA)
+ *
+ * outputs:
+ * HPOUTL - headphone left
+ * HPOUTR - headphone right
+ * LINEOUT - line out differential
+ * EAROUT - earpeiece differential
+ * SPKOUT1 - SPOL left speaker differnetial
+ * SPKOUT2 - SPOR right speaker differnetial
+ *
+ * Power up:
+ * LDOIN - 1.5-3.3V external power
+ * AVCC - analog power 3V
+ * CPVDD - 1.8V
+ * VDD-IO1 - power for I2S #1 and #2 1.8/3V
+ * VDD-IO2 - power for I2S #3 1.8/3V
+ * VCC-RTC - power for RTC 1.8/3V
+ *
+ * Clocks: page 28
+ * SYSCLK must be 24576000 Hz (48kHz) or 22579200 Hz (44.1kHz)
+ * - Source I2S1CLK/MCLK1
+ * - If SRC# module is used SYSCLK must be generated by PLL
+ *
+ * A/D:
+ * ADC_APC_CTRL B15 B11 enable/disable A/D to save power
+ * ADC_APC_CTRL B14-12 B10-8 volume control for A/D
+ * ADC_DIG_CTRL B15 enable/disable digital A/D to save power
+ * ADDA_FS_I2S1 ADDA_FS_I2S2 - select sample rate
+ *
+ * D/A:
+ * OMIXER_DACA_CTRL B15-14 enable/disable D/A channels
+ * DAC_DIG_CTRL B15 enable/disable digital D/A
+ *
+ * Mixer:
+ * - 2 channels DAC Output mixers
+ * - inputs:
+ * - LINEINL/R
+ * - AXIL/R
+ * - MIC1P/N,MIC2P/N
+ * - Stereo DAC output
+ * - 2 channels ADC Record mixers
+ * - inputs:
+ * - LINEINL/R
+ * - AXIL/R
+ * - MIC1P/N,MIC2P/N
+ * - Stereo DAC output
+ * - Digital mixers
+ * - avaliable on:
+ * - before stereo DAC - DAC_MXR_SRC
+ * - I2S1 output - I2S1_MXR_SRC
+ * - I2S2 output - I2S2_MXR_SRC
+ * - Analogue inputs
+ * - LINEINL/R - 1 ch. mono
+ * - can be mixed into ADC record mixer or DAC output mixer
+ * - -9dB to 12dB in 1.5dB step by LINEIN_DIFF_PREG
+ * - AXIL/R - 2 ch. stereo
+ * - can be mixed into ADC record mixer or DAC output mixer
+ * - programmable volume level adj. and mute
+ * - -9dB to 12dB in 1.5dB steps by AXI_PREG
+ * - MIC1P/N - has preamp
+ * - MIC2P/N - has preamp
+ * - MIC3P/N - has preamp muxed with MIC2 (sel by ADC_SRCBST_CTRL B7)
+ * - can be mixed into ADC record mixer or DAC output mixer
+ * - preamps enable at ADC_SRCBST_CTRL B15 and B11
+ * - preamp gain at MIC1BOOST MIC2BOOST
+ * - Analogue outputs:
+ * - HPOUTL/R, HPOUTFB - 2ch. headphones
+ * - sources output mixer or directly from DAC
+ * - sel HPOUT_CTRL B15 B14
+ * - mute HPOUT_CTRL B13 B12
+ * - power amp
+ * - powerdown/up HPOUT_CTRL B11
+ * - volume HP_VOL[5:0] - 64dB range in 1dB step from 0dB to -62dB
+ * - mute by using 0 for HP_VOL[5:0]
+ * - DC offset cancellation (POP noise) HP_DCRM_EN
+ * - This bit must be set 0xf before headphone PA enabled, and this bit
+ * must be set 0x0 before headphone PA disabled.
+ * - zero cross to prevent noise/clicsk on volume change ZCROSS_EN
+ * - SPOLP/N, SPORP/N 2 ch. speakers (mono/stereo)
+ * - source for SPOLP
+ * - left output mixer or (left+right) output mixer
+ * - source for SPORP
+ * - right output mixer or (left+right) output mixer
+ * - volume 43.5dB rang in 1.5dB step from -43.5dB to 0dB
+ * - amp enable SPKOUT_CTRL B11 B7
+ * - EAROUTP/N - 1 ch earpeice
+ * - source left DAC, right DAC, left output mixer or right output mixer
+ * - volume ERPOUT_CTRL[4:0] 43.5dB range in 1.5dB step from -43.5dB to 0dB
+ * - power amp enable ERPOUT_CTRL B5
+ * - LINEOUTP/N - 1ch line out
+ * - source MIC1 preamp, MIC2 preamp, left output mix or right output mix
+ * - volume 10.5dB range in 1.5dB step from -4.5dB to 6dB
+ * - out buffer power up/down LOUT_CTRL B4
+ *
+ * Jack insert detection:
+ * - HBIAS current detection
+ * - 5bit ADC sample rate 16/32/64/128Hz
+ * - HMIC_STATUS[12:8] - ADC value
+ * - 2 thresholds TH1 for plug connection, TH2 for key press
+ * - can periodically trigger interrupts during key press (HBIAS above TH2)
+ *
+ * Interrupts:
+ * - FALLING_EDGE
+ * - for:
+ * - KEYDOWN
+ * - KEYUP
+ * - PLUG_IN
+ * - PLUG_OUT
+ * - HMIC_DATA
+ *
+ * High Pass Filter:
+ * - remove DC offset, can be disabled
+ *
+ * AGC:
+ * - automatic gain control before ADC input channels
+ * - params:
+ * - attack, decay time - 32/fs to 2^15*32/fs
+ * - target gain - –1dB to –30dB relative to a full-scale signal
+ * - noise threshold - –30dB to –90dB of full-scale (mute if input below this level)
+ * - max gain 0dB to 40dB in steps of 0.5dB
+ * - hysteresis - for noise detection in terms of signal level
+ * - debounce time - hysteresis for noise det in terms of time
+ * - also provides some output flags:
+ * - noise threshold reached
+ * - current gain
+ * - agc saturated (gain could get higher for the given input, but limited by
+ * params)
+ * - adc saturated - clipping at ADC input stage
+ *
+ * DRC:
+ * - dynamic range control for digital playback path
+ * - energy filter
+ * - compressor
+ * - smooth filter
+ * - can be disabled
+ */
+
+#define AC100_HMIC_DATA_MASK GENMASK(12, 8)
+#define AC100_HMIC_DATA_OFF 8
+#define AC100_HMIC_PULLOUT_PENDING BIT(4)
+#define AC100_HMIC_PLUGIN_PENDING BIT(3)
+#define AC100_HMIC_KEYUP_PENDING BIT(2)
+#define AC100_HMIC_KEYDOWN_PENDING BIT(1)
+#define AC100_HMIC_DATA_PENDING BIT(0)
+
+struct ac100_codec {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+};
+
+static irqreturn_t ac100_codec_irq(int irq, void *data)
+{
+ struct ac100_codec *codec = data;
+ unsigned int val = 0;
+ int ret;
+
+ /* read status */
+ ret = regmap_read(codec->regmap, AC100_HMIC_STATUS, &val);
+ if (ret)
+ return IRQ_HANDLED;
+
+ if (val & AC100_HMIC_PULLOUT_PENDING) {
+ dev_info(codec->dev, "IRQ: Pull out");
+ }
+
+ if (val & AC100_HMIC_PLUGIN_PENDING) {
+ dev_info(codec->dev, "IRQ: Plug in");
+ }
+
+ if (val & AC100_HMIC_KEYUP_PENDING) {
+ dev_info(codec->dev, "IRQ: Key up");
+ }
+
+ if (val & AC100_HMIC_KEYDOWN_PENDING) {
+ dev_info(codec->dev, "IRQ: Key down");
+ }
+
+ if (val & AC100_HMIC_DATA_PENDING) {
+ dev_info(codec->dev, "IRQ: Data");
+ }
+
+ /* clear status */
+ ret = regmap_write(codec->regmap, AC100_HMIC_STATUS, 0);
+ if (ret)
+ return IRQ_HANDLED;
+
+ return IRQ_HANDLED;
+}
+
+static int ac100_codec_probe(struct platform_device *pdev)
+{
+ struct ac100_dev *ac100 = dev_get_drvdata(pdev->dev.parent);
+ struct ac100_codec *codec;
+ int ret;
+
+ codec = devm_kzalloc(&pdev->dev, sizeof(*codec), GFP_KERNEL);
+ if (!codec)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, codec);
+ codec->dev = &pdev->dev;
+ codec->regmap = ac100->regmap;
+
+ codec->irq = platform_get_irq(pdev, 0);
+ if (codec->irq < 0) {
+ dev_err(&pdev->dev, "No IRQ resource\n");
+ return codec->irq;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, codec->irq, NULL,
+ ac100_codec_irq,
+ IRQF_SHARED | IRQF_ONESHOT,
+ dev_name(&pdev->dev), codec);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not request IRQ\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ac100_codec_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+ struct ac100_codec *codec = snd_soc_card_get_drvdata(card);
+
+ return 0;
+}
+
+static const struct of_device_id ac100_codec_of_match[] = {
+ { .compatible = "x-powers,ac100-codec" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ac100_codec_of_match);
+
+static struct platform_driver ac100_codec_driver = {
+ .driver = {
+ .name = "ac100-codec",
+ .of_match_table = ac100_codec_of_match,
+ },
+ .probe = ac100_codec_probe,
+ .remove = ac100_codec_remove,
+};
+module_platform_driver(ac100_codec_driver);
+
+MODULE_DESCRIPTION("X-Powers AC100 codec driver");
+MODULE_AUTHOR("Ondrej Jirman <megous@megous.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ac100-codec");
Reference in New Issue Copy Permalink