build/patch/kernel/archive/sunxi-6.1/patches.megous/regulator-tp65185x-Add-tp65185x-eInk-panel-regulator-driver.patch

From 7da09897a8eb4b19a429d7d05feeb719eba43bdc Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
Date: Sat, 5 Oct 2019 15:12:51 +0200
Subject: [PATCH 076/389] regulator: tp65185x: Add tp65185x eInk panel
 regulator driver

This is a very simple driver that doesn't try to expose individual
regulators, and implements the specific power sequencing necessary
for the eInk panel power up directly.

All the 6 regulators are thus represented as one logical supply.
VCOM output is the only voltage that needs setting, and it can
be changed by setting the voltage of the regulator exported by
the driver.

Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
 drivers/regulator/Kconfig    |   8 +
 drivers/regulator/Makefile   |   1 +
 drivers/regulator/tp65185x.c | 428 +++++++++++++++++++++++++++++++++++
 3 files changed, 437 insertions(+)
 create mode 100644 drivers/regulator/tp65185x.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 8d441b193f4b..023089c03931 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1533,4 +1533,12 @@ config REGULATOR_QCOM_LABIBB
 	  boost regulator and IBB can be used as a negative boost regulator
 	  for LCD display panel.
 
+config REGULATOR_TP65185X
+	tristate "eInk display regulator tp65185x"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver provides support for the voltage regulators for
+	  eInk displays on various e-book readers.
+
 endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 0ef88e8c8cf5..f1723b36abf4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -183,5 +183,6 @@ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
+obj-$(CONFIG_REGULATOR_TP65185X) += tp65185x.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/tp65185x.c b/drivers/regulator/tp65185x.c
new file mode 100644
index 000000000000..8b57a11ff2f9
--- /dev/null
+++ b/drivers/regulator/tp65185x.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Regulator device driver for tp65185x (eInk panel regulator)
+//
+// Copyright (C) 2019 Ondřej Jirman <megi@xff.cz>
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+
+#define REG_TMST_VALUE    0x00
+#define REG_ENABLE        0x01
+#define REG_VADJ          0x02
+#define REG_VCOM1         0x03
+#define REG_VCOM2         0x04
+#define REG_INT_EN1       0x05
+#define REG_INT_EN2       0x06
+#define REG_INT1          0x07
+#define REG_INT2          0x08
+#define REG_UPSEQ0        0x09
+#define REG_UPSEQ1        0x0A
+#define REG_DWNSEQ0       0x0B
+#define REG_DWNSEQ1       0x0C
+#define REG_TMST1         0x0D
+#define REG_TMST2         0x0E
+#define REG_PG            0x0F
+#define REG_REVID         0x10
+
+struct tp65185x {
+	struct device* dev;
+	struct gpio_desc* wakeup_gpio;
+	struct gpio_desc* vcom_gpio;
+	struct gpio_desc* powerup_gpio;
+	struct gpio_desc* powergood_gpio;
+	struct regmap *regmap;
+	bool is_enabled;
+	int vcom;
+};
+
+static const struct regmap_config tp65185x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x10,
+	.cache_type = REGCACHE_NONE,
+};
+
+struct voltage_rail {
+	const char* name;
+	int bit;
+	int bit_en;
+};
+
+static const struct voltage_rail rails[] = {
+	{ "VB",    7, -1 },
+	{ "VDDH",  6, 3 },
+	{ "VN",    5, -1 },
+	{ "VPOS",  4, 2 },
+	{ "VEE",   3, 1 },
+	{ "VNEG",  1, 0 },
+	{ "VCOM",  -1, 4 },
+	{ "V3P3",  -1, 5 },
+};
+
+static int apply_voltage(struct tp65185x *tp, int vcom)
+{
+	int ret;
+
+	ret = regmap_write(tp->regmap, REG_VCOM1, vcom & 0xff);
+	if (ret)
+		return ret;
+
+	return regmap_write(tp->regmap, REG_VCOM2, (vcom >> 8) & 1);
+}
+
+static int set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
+		       unsigned *selector)
+{
+	struct tp65185x* tp = rdev_get_drvdata(rdev);
+	unsigned int vcom = min_uV / 10000;
+
+	if (vcom > 511 || min_uV < 0)
+		return -EINVAL;
+
+	tp->vcom = vcom;
+
+	// setup VCOM
+
+	if (!tp->is_enabled)
+		return 0;
+
+	return apply_voltage(tp, vcom);
+}
+
+static int get_voltage(struct regulator_dev *rdev)
+{
+	struct tp65185x* tp = rdev_get_drvdata(rdev);
+	unsigned int lsb, msb;
+	int ret;
+
+	if (tp->is_enabled) {
+		ret = regmap_read(rdev->regmap, REG_VCOM1, &lsb);
+		if (ret)
+			return ret;
+
+		ret = regmap_read(rdev->regmap, REG_VCOM2, &msb);
+		if (ret)
+			return ret;
+
+		return (lsb | ((msb & 1) << 8)) * 10000;
+	}
+
+	return tp->vcom * 10000;
+}
+
+#ifdef DEBUG
+static int show_power_status(struct tp65185x* tp, const char* state)
+{
+	unsigned int reg;
+	int i, ret;
+
+	ret = regmap_read(tp->regmap, REG_PG, &reg);
+	if (ret)
+		return ret;
+
+	dev_warn(tp->dev, "%s:\n", state);
+
+	dev_warn(tp->dev, "  voltage rail power good:\n");
+	for (i = 0; i < ARRAY_SIZE(rails); i++)
+		if (rails[i].bit >= 0)
+			dev_warn(tp->dev, "    %s %s\n", rails[i].name,
+				 reg & BIT(rails[i].bit) ? "good" : "fail");
+
+	ret = regmap_read(tp->regmap, REG_ENABLE, &reg);
+	if (ret)
+		return ret;
+
+	dev_warn(tp->dev, "  voltage rail enable status:\n");
+	for (i = 0; i < ARRAY_SIZE(rails); i++)
+		if (rails[i].bit_en >= 0)
+			dev_warn(tp->dev, "    %s %s\n", rails[i].name,
+				 reg & BIT(rails[i].bit_en)
+					? "enabled" : "disabled");
+
+	return 0;
+}
+#else
+static int show_power_status(struct tp65185x* tp, const char* state)
+{
+	return 0;
+}
+#endif
+
+static int show_power_bad(struct tp65185x* tp)
+{
+	unsigned int reg;
+	int i, ret;
+
+	ret = regmap_read(tp->regmap, REG_PG, &reg);
+	if (ret)
+		return ret;
+
+	dev_warn(tp->dev, "Voltage rail failures:\n");
+	for (i = 0; i < ARRAY_SIZE(rails); i++)
+		if (rails[i].bit >= 0 && !(reg & BIT(rails[i].bit)))
+			dev_warn(tp->dev, "  %s failed\n", rails[i].name);
+
+	return 0;
+}
+
+static int wait_for_power_good(struct tp65185x *tp)
+{
+	int ret, loops = 10;
+
+	// wait for power good
+	while (loops-- > 0) {
+		ret = gpiod_get_value(tp->powergood_gpio);
+		if (ret < 0)
+			return ret;
+
+		if (ret)
+			return 0;
+
+		msleep(5);
+	}
+
+	show_power_bad(tp);
+	return -ETIMEDOUT;
+}
+
+static int enable_supply(struct regulator_dev *rdev)
+{
+	struct tp65185x* tp = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (tp->is_enabled)
+		return 0;
+
+	// wake up the regulator
+	gpiod_set_value(tp->wakeup_gpio, 1);
+	usleep_range(3000, 4000);
+
+	ret = apply_voltage(tp, tp->vcom);
+	if (ret) {
+		dev_err(tp->dev, "vcom restore failed (%d)\n", ret);
+		goto err;
+	}
+
+	show_power_status(tp, "pre-powerup");
+
+	// enable the VDD on the panel (V3P3) first
+	ret = regmap_write(tp->regmap, REG_ENABLE, 0x20);
+	if (ret) {
+		dev_err(tp->dev, "vdd enable failed (%d)\n", ret);
+		goto err;
+	}
+
+	usleep_range(2000, 2200);
+
+	show_power_status(tp, "V3P3 en");
+
+	// powerup by default takes about 20ms
+	gpiod_set_value(tp->powerup_gpio, 1);
+	usleep_range(22000, 24000);
+
+	ret = wait_for_power_good(tp);
+	if (ret)
+		goto err;
+
+	show_power_status(tp, "powerup done");
+
+	// enable VCOM last
+	gpiod_set_value(tp->vcom_gpio, 1);
+	usleep_range(4000, 5000);
+
+	show_power_status(tp, "powerup vcom");
+
+        tp->is_enabled = true;
+	return 0;
+
+err:
+	gpiod_set_value(tp->vcom_gpio, 0);
+	usleep_range(2000, 3000);
+	gpiod_set_value(tp->powerup_gpio, 0);
+	msleep(100);
+	gpiod_set_value(tp->wakeup_gpio, 0);
+	return ret;
+}
+
+static int disable_supply(struct regulator_dev *rdev)
+{
+	struct tp65185x* tp = rdev_get_drvdata(rdev);
+
+	if (!tp->is_enabled)
+		return 0;
+
+	show_power_status(tp, "pre-poweroff");
+
+	gpiod_set_value(tp->vcom_gpio, 0);
+	usleep_range(5000, 6000);
+
+	show_power_status(tp, "vcom down");
+
+	gpiod_set_value(tp->powerup_gpio, 0);
+
+	// it may take up to 100ms to power off all high voltage rails
+	msleep(100);
+
+	show_power_status(tp, "power down");
+
+	// this will power down the V3P3 switch too
+	gpiod_set_value(tp->wakeup_gpio, 0);
+
+	tp->is_enabled = false;
+
+	return 0;
+}
+
+static int is_supply_enabled(struct regulator_dev *rdev)
+{
+	struct tp65185x* tp = rdev_get_drvdata(rdev);
+	//int ret;
+
+	//ret = gpiod_get_value(tp->powergood_gpio);
+	//if (ret < 0)
+		//return ret;
+
+	return tp->is_enabled;
+}
+
+static const struct regulator_ops tp65185x_ops = {
+	.is_enabled		= is_supply_enabled,
+	.enable			= enable_supply,
+	.disable		= disable_supply,
+	.set_voltage		= set_voltage,
+	.get_voltage		= get_voltage,
+};
+
+static const struct regulator_desc tp65185x_reg = {
+	.name = "tp65185x",
+	.id = 0,
+	.continuous_voltage_range = 1,
+	.ops = &tp65185x_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+
+static int tp65185x_i2c_probe(struct i2c_client *i2c,
+			      const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c->dev;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	unsigned int reg;
+	struct tp65185x* tp;
+	const char* rev = NULL;
+	int ret;
+
+	tp = devm_kzalloc(dev, sizeof(*tp), GFP_KERNEL);
+	if (!tp)
+		return -ENOMEM;
+
+	tp->dev = dev;
+
+	tp->powergood_gpio = devm_gpiod_get(dev, "powergood", GPIOD_IN);
+	if (IS_ERR(tp->powergood_gpio)) {
+		ret = PTR_ERR(tp->powergood_gpio);
+		dev_err(dev, "Can't get wakeup gpio (%d)\n", ret);
+		return ret;
+	}
+
+	tp->powerup_gpio = devm_gpiod_get(dev, "powerup", GPIOD_OUT_LOW);
+	if (IS_ERR(tp->powerup_gpio)) {
+		ret = PTR_ERR(tp->powerup_gpio);
+		dev_err(dev, "Can't get wakeup gpio (%d)\n", ret);
+		return ret;
+	}
+
+	tp->vcom_gpio = devm_gpiod_get(dev, "vcom", GPIOD_OUT_LOW);
+	if (IS_ERR(tp->vcom_gpio)) {
+		ret = PTR_ERR(tp->vcom_gpio);
+		dev_err(dev, "Can't get wakeup gpio (%d)\n", ret);
+		return ret;
+	}
+
+	tp->wakeup_gpio = devm_gpiod_get(dev, "wakeup", GPIOD_OUT_HIGH);
+	if (IS_ERR(tp->wakeup_gpio)) {
+		ret = PTR_ERR(tp->wakeup_gpio);
+		dev_err(dev, "Can't get wakeup gpio (%d)\n", ret);
+		return ret;
+	}
+
+	// wait for wakeup
+	usleep_range(10000, 12000);
+
+	i2c_set_clientdata(i2c, tp);
+
+	tp->regmap = devm_regmap_init_i2c(i2c, &tp65185x_regmap_config);
+	if (IS_ERR(tp->regmap)) {
+		ret = PTR_ERR(tp->regmap);
+		dev_err(dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(tp->regmap, REG_REVID, &reg);
+	if (ret) {
+		dev_err(dev, "chip id read failed (%d)\n", ret);
+		return ret;
+	}
+
+	switch (reg) {
+		case 0x45: rev = "TPS65185 1p0"; break;
+		case 0x55: rev = "TPS65185 1p1"; break;
+		case 0x65: rev = "TPS65185 1p2"; break;
+		case 0x66: rev = "TPS651851 1p0"; break;
+		default:
+			dev_err(dev, "reading chip id\n");
+			break;
+
+	}
+
+	dev_info(dev, "detected chip id 0x%02x (%s)\n", (int)reg, rev);
+
+	// disable regulators, move to sleep
+	gpiod_set_value(tp->wakeup_gpio, 0);
+
+	config.driver_data = tp;
+	config.dev = &i2c->dev;
+	config.regmap = tp->regmap;
+	config.of_node = dev->of_node;
+	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
+						      &tp65185x_reg);
+	if (!config.init_data)
+		return -ENOMEM;
+
+	rdev = devm_regulator_register(&i2c->dev, &tp65185x_reg, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&i2c->dev, "Failed to register egulator (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id tp65185x_i2c_id[] = {
+	{ "tp65185x", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, tp65185x_i2c_id);
+
+static struct i2c_driver tp65185x_regulator_driver = {
+	.driver = {
+		.name = "tp65185x",
+	},
+	.probe = tp65185x_i2c_probe,
+	.id_table = tp65185x_i2c_id,
+};
+
+module_i2c_driver(tp65185x_regulator_driver);
+
+MODULE_AUTHOR("Ondřej Jirman <megi@xff.cz>");
+MODULE_DESCRIPTION("Regulator device driver for tp65185x");
+MODULE_LICENSE("GPL");
-- 
2.35.3