build/patch/kernel/archive/sunxi-6.5/patches.armbian/drv-mfd-Add-support-for-AC200.patch

440 lines
13 KiB
Diff
Raw Normal View History

From 945eee6dd75294cd527b1ca6109758afb262a45c Mon Sep 17 00:00:00 2001
From: Jernej Skrabec <jernej.skrabec@siol.net>
Date: Fri, 16 Aug 2019 16:38:21 +0200
Subject: [PATCH 004/153] drv:mfd: Add support for AC200
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
drivers/mfd/Kconfig | 9 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/ac200.c | 170 +++++++++++++++++++++++++++++++
include/linux/mfd/ac200.h | 208 ++++++++++++++++++++++++++++++++++++++
4 files changed, 388 insertions(+)
create mode 100644 drivers/mfd/ac200.c
create mode 100644 include/linux/mfd/ac200.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 30db49f31..473359275 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -190,6 +190,15 @@ config MFD_AC100
This driver include only the core APIs. You have to select individual
components like codecs or RTC under the corresponding menus.
+config MFD_AC200
+ bool "X-Powers AC200"
+ select MFD_CORE
+ depends on I2C
+ help
+ If you say Y here you get support for the X-Powers AC200 IC.
+ This driver include only the core APIs. You have to select individual
+ components like Ethernet PHY or RTC under the corresponding menus.
+
config MFD_AXP20X
tristate
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 457471478..b2e69fbce 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -141,6 +141,7 @@ obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
obj-$(CONFIG_MFD_AC100) += ac100.o
+obj-$(CONFIG_MFD_AC200) += ac200.o
obj-$(CONFIG_MFD_AXP20X) += axp20x.o
obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
diff --git a/drivers/mfd/ac200.c b/drivers/mfd/ac200.c
new file mode 100644
index 000000000..570573790
--- /dev/null
+++ b/drivers/mfd/ac200.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MFD core driver for X-Powers' AC200 IC
+ *
+ * The AC200 is a chip which is co-packaged with Allwinner H6 SoC and
+ * includes analog audio codec, analog TV encoder, ethernet PHY, eFuse
+ * and RTC.
+ *
+ * Copyright (c) 2020 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ac200.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+/* Interrupts */
+#define AC200_IRQ_RTC 0
+#define AC200_IRQ_EPHY 1
+#define AC200_IRQ_TVE 2
+
+/* IRQ enable register */
+#define AC200_SYS_IRQ_ENABLE_OUT_EN BIT(15)
+#define AC200_SYS_IRQ_ENABLE_RTC BIT(12)
+#define AC200_SYS_IRQ_ENABLE_EPHY BIT(8)
+#define AC200_SYS_IRQ_ENABLE_TVE BIT(4)
+
+static const struct regmap_range_cfg ac200_range_cfg[] = {
+ {
+ .range_min = AC200_SYS_VERSION,
+ .range_max = AC200_IC_CHARA1,
+ .selector_reg = AC200_TWI_REG_ADDR_H,
+ .selector_mask = 0xff,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 256,
+ }
+};
+
+static const struct regmap_config ac200_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .ranges = ac200_range_cfg,
+ .num_ranges = ARRAY_SIZE(ac200_range_cfg),
+ .max_register = AC200_IC_CHARA1,
+};
+
+static const struct regmap_irq ac200_regmap_irqs[] = {
+ REGMAP_IRQ_REG(AC200_IRQ_RTC, 0, AC200_SYS_IRQ_ENABLE_RTC),
+ REGMAP_IRQ_REG(AC200_IRQ_EPHY, 0, AC200_SYS_IRQ_ENABLE_EPHY),
+ REGMAP_IRQ_REG(AC200_IRQ_TVE, 0, AC200_SYS_IRQ_ENABLE_TVE),
+};
+
+static const struct regmap_irq_chip ac200_regmap_irq_chip = {
+ .name = "ac200_irq_chip",
+ .status_base = AC200_SYS_IRQ_STATUS,
+ .mask_base = AC200_SYS_IRQ_ENABLE,
+ .mask_invert = true,
+ .irqs = ac200_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(ac200_regmap_irqs),
+ .num_regs = 1,
+};
+
+static const struct resource ephy_resource[] = {
+ DEFINE_RES_IRQ(AC200_IRQ_EPHY),
+};
+
+static const struct mfd_cell ac200_cells[] = {
+ {
+ .name = "ac200-ephy",
+ .num_resources = ARRAY_SIZE(ephy_resource),
+ .resources = ephy_resource,
+ .of_compatible = "x-powers,ac200-ephy",
+ },
+};
+
+static int ac200_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct ac200_dev *ac200;
+ int ret;
+
+ ac200 = devm_kzalloc(dev, sizeof(*ac200), GFP_KERNEL);
+ if (!ac200)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, ac200);
+
+ ac200->regmap = devm_regmap_init_i2c(i2c, &ac200_regmap_config);
+ if (IS_ERR(ac200->regmap)) {
+ ret = PTR_ERR(ac200->regmap);
+ dev_err(dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ /* do a reset to put chip in a known state */
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_CONTROL, 1);
+ if (ret)
+ return ret;
+
+ /* enable interrupt pin */
+
+ ret = regmap_write(ac200->regmap, AC200_SYS_IRQ_ENABLE,
+ AC200_SYS_IRQ_ENABLE_OUT_EN);
+ if (ret)
+ return ret;
+
+ ret = regmap_add_irq_chip(ac200->regmap, i2c->irq, IRQF_ONESHOT, 0,
+ &ac200_regmap_irq_chip, &ac200->regmap_irqc);
+ if (ret)
+ return ret;
+
+ ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, ac200_cells,
+ ARRAY_SIZE(ac200_cells), NULL, 0, NULL);
+ if (ret) {
+ dev_err(dev, "failed to add MFD devices: %d\n", ret);
+ regmap_del_irq_chip(i2c->irq, ac200->regmap_irqc);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ac200_i2c_remove(struct i2c_client *i2c)
+{
+ struct ac200_dev *ac200 = i2c_get_clientdata(i2c);
+
+ regmap_write(ac200->regmap, AC200_SYS_CONTROL, 0);
+
+ mfd_remove_devices(&i2c->dev);
+ regmap_del_irq_chip(i2c->irq, ac200->regmap_irqc);
+
+ return 0;
+}
+
+static const struct i2c_device_id ac200_ids[] = {
+ { "ac200", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, ac200_ids);
+
+static const struct of_device_id ac200_of_match[] = {
+ { .compatible = "x-powers,ac200" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ac200_of_match);
+
+static struct i2c_driver ac200_i2c_driver = {
+ .driver = {
+ .name = "ac200",
+ .of_match_table = of_match_ptr(ac200_of_match),
+ },
+ .probe = ac200_i2c_probe,
+ .remove = ac200_i2c_remove,
+ .id_table = ac200_ids,
+};
+module_i2c_driver(ac200_i2c_driver);
+
+MODULE_DESCRIPTION("MFD core driver for AC200");
+MODULE_AUTHOR("Jernej Skrabec <jernej.skrabec@siol.net>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/ac200.h b/include/linux/mfd/ac200.h
new file mode 100644
index 000000000..0c677094a
--- /dev/null
+++ b/include/linux/mfd/ac200.h
@@ -0,0 +1,208 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AC200 register list
+ *
+ * Copyright (C) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
+ */
+
+#ifndef __LINUX_MFD_AC200_H
+#define __LINUX_MFD_AC200_H
+
+#include <linux/regmap.h>
+
+/* interface registers (can be accessed from any page) */
+#define AC200_TWI_CHANGE_TO_RSB 0x3E
+#define AC200_TWI_PAD_DELAY 0xC4
+#define AC200_TWI_REG_ADDR_H 0xFE
+
+/* General registers */
+#define AC200_SYS_VERSION 0x0000
+#define AC200_SYS_CONTROL 0x0002
+#define AC200_SYS_IRQ_ENABLE 0x0004
+#define AC200_SYS_IRQ_STATUS 0x0006
+#define AC200_SYS_CLK_CTL 0x0008
+#define AC200_SYS_DLDO_OSC_CTL 0x000A
+#define AC200_SYS_PLL_CTL0 0x000C
+#define AC200_SYS_PLL_CTL1 0x000E
+#define AC200_SYS_AUDIO_CTL0 0x0010
+#define AC200_SYS_AUDIO_CTL1 0x0012
+#define AC200_SYS_EPHY_CTL0 0x0014
+#define AC200_SYS_EPHY_CTL1 0x0016
+#define AC200_SYS_TVE_CTL0 0x0018
+#define AC200_SYS_TVE_CTL1 0x001A
+
+/* Audio Codec registers */
+#define AC200_AC_SYS_CLK_CTL 0x2000
+#define AC200_SYS_MOD_RST 0x2002
+#define AC200_SYS_SAMP_CTL 0x2004
+#define AC200_I2S_CTL 0x2100
+#define AC200_I2S_CLK 0x2102
+#define AC200_I2S_FMT0 0x2104
+#define AC200_I2S_FMT1 0x2108
+#define AC200_I2S_MIX_SRC 0x2114
+#define AC200_I2S_MIX_GAIN 0x2116
+#define AC200_I2S_DACDAT_DVC 0x2118
+#define AC200_I2S_ADCDAT_DVC 0x211A
+#define AC200_AC_DAC_DPC 0x2200
+#define AC200_AC_DAC_MIX_SRC 0x2202
+#define AC200_AC_DAC_MIX_GAIN 0x2204
+#define AC200_DACA_OMIXER_CTRL 0x2220
+#define AC200_OMIXER_SR 0x2222
+#define AC200_LINEOUT_CTRL 0x2224
+#define AC200_AC_ADC_DPC 0x2300
+#define AC200_MBIAS_CTRL 0x2310
+#define AC200_ADC_MIC_CTRL 0x2320
+#define AC200_ADCMIXER_SR 0x2322
+#define AC200_ANALOG_TUNING0 0x232A
+#define AC200_ANALOG_TUNING1 0x232C
+#define AC200_AC_AGC_SEL 0x2480
+#define AC200_ADC_DAPLCTRL 0x2500
+#define AC200_ADC_DAPRCTRL 0x2502
+#define AC200_ADC_DAPLSTA 0x2504
+#define AC200_ADC_DAPRSTA 0x2506
+#define AC200_ADC_DAPLTL 0x2508
+#define AC200_ADC_DAPRTL 0x250A
+#define AC200_ADC_DAPLHAC 0x250C
+#define AC200_ADC_DAPLLAC 0x250E
+#define AC200_ADC_DAPRHAC 0x2510
+#define AC200_ADC_DAPRLAC 0x2512
+#define AC200_ADC_DAPLDT 0x2514
+#define AC200_ADC_DAPLAT 0x2516
+#define AC200_ADC_DAPRDT 0x2518
+#define AC200_ADC_DAPRAT 0x251A
+#define AC200_ADC_DAPNTH 0x251C
+#define AC200_ADC_DAPLHNAC 0x251E
+#define AC200_ADC_DAPLLNAC 0x2520
+#define AC200_ADC_DAPRHNAC 0x2522
+#define AC200_ADC_DAPRLNAC 0x2524
+#define AC200_AC_DAPHHPFC 0x2526
+#define AC200_AC_DAPLHPFC 0x2528
+#define AC200_AC_DAPOPT 0x252A
+#define AC200_AC_DAC_DAPCTRL 0x3000
+#define AC200_AC_DRC_HHPFC 0x3002
+#define AC200_AC_DRC_LHPFC 0x3004
+#define AC200_AC_DRC_CTRL 0x3006
+#define AC200_AC_DRC_LPFHAT 0x3008
+#define AC200_AC_DRC_LPFLAT 0x300A
+#define AC200_AC_DRC_RPFHAT 0x300C
+#define AC200_AC_DRC_RPFLAT 0x300E
+#define AC200_AC_DRC_LPFHRT 0x3010
+#define AC200_AC_DRC_LPFLRT 0x3012
+#define AC200_AC_DRC_RPFHRT 0x3014
+#define AC200_AC_DRC_RPFLRT 0x3016
+#define AC200_AC_DRC_LRMSHAT 0x3018
+#define AC200_AC_DRC_LRMSLAT 0x301A
+#define AC200_AC_DRC_RRMSHAT 0x301C
+#define AC200_AC_DRC_RRMSLAT 0x301E
+#define AC200_AC_DRC_HCT 0x3020
+#define AC200_AC_DRC_LCT 0x3022
+#define AC200_AC_DRC_HKC 0x3024
+#define AC200_AC_DRC_LKC 0x3026
+#define AC200_AC_DRC_HOPC 0x3028
+#define AC200_AC_DRC_LOPC 0x302A
+#define AC200_AC_DRC_HLT 0x302C
+#define AC200_AC_DRC_LLT 0x302E
+#define AC200_AC_DRC_HKI 0x3030
+#define AC200_AC_DRC_LKI 0x3032
+#define AC200_AC_DRC_HOPL 0x3034
+#define AC200_AC_DRC_LOPL 0x3036
+#define AC200_AC_DRC_HET 0x3038
+#define AC200_AC_DRC_LET 0x303A
+#define AC200_AC_DRC_HKE 0x303C
+#define AC200_AC_DRC_LKE 0x303E
+#define AC200_AC_DRC_HOPE 0x3040
+#define AC200_AC_DRC_LOPE 0x3042
+#define AC200_AC_DRC_HKN 0x3044
+#define AC200_AC_DRC_LKN 0x3046
+#define AC200_AC_DRC_SFHAT 0x3048
+#define AC200_AC_DRC_SFLAT 0x304A
+#define AC200_AC_DRC_SFHRT 0x304C
+#define AC200_AC_DRC_SFLRT 0x304E
+#define AC200_AC_DRC_MXGHS 0x3050
+#define AC200_AC_DRC_MXGLS 0x3052
+#define AC200_AC_DRC_MNGHS 0x3054
+#define AC200_AC_DRC_MNGLS 0x3056
+#define AC200_AC_DRC_EPSHC 0x3058
+#define AC200_AC_DRC_EPSLC 0x305A
+#define AC200_AC_DRC_HPFHGAIN 0x305E
+#define AC200_AC_DRC_HPFLGAIN 0x3060
+#define AC200_AC_DRC_BISTCR 0x3100
+#define AC200_AC_DRC_BISTST 0x3102
+
+/* TVE registers */
+#define AC200_TVE_CTL0 0x4000
+#define AC200_TVE_CTL1 0x4002
+#define AC200_TVE_MOD0 0x4004
+#define AC200_TVE_MOD1 0x4006
+#define AC200_TVE_DAC_CFG0 0x4008
+#define AC200_TVE_DAC_CFG1 0x400A
+#define AC200_TVE_YC_DELAY 0x400C
+#define AC200_TVE_YC_FILTER 0x400E
+#define AC200_TVE_BURST_FRQ0 0x4010
+#define AC200_TVE_BURST_FRQ1 0x4012
+#define AC200_TVE_FRONT_PORCH 0x4014
+#define AC200_TVE_BACK_PORCH 0x4016
+#define AC200_TVE_TOTAL_LINE 0x401C
+#define AC200_TVE_FIRST_ACTIVE 0x401E
+#define AC200_TVE_BLACK_LEVEL 0x4020
+#define AC200_TVE_BLANK_LEVEL 0x4022
+#define AC200_TVE_PLUG_EN 0x4030
+#define AC200_TVE_PLUG_IRQ_EN 0x4032
+#define AC200_TVE_PLUG_IRQ_STA 0x4034
+#define AC200_TVE_PLUG_STA 0x4038
+#define AC200_TVE_PLUG_DEBOUNCE 0x4040
+#define AC200_TVE_DAC_TEST 0x4042
+#define AC200_TVE_PLUG_PULSE_LEVEL 0x40F4
+#define AC200_TVE_PLUG_PULSE_START 0x40F8
+#define AC200_TVE_PLUG_PULSE_PERIOD 0x40FA
+#define AC200_TVE_IF_CTL 0x5000
+#define AC200_TVE_IF_TIM0 0x5008
+#define AC200_TVE_IF_TIM1 0x500A
+#define AC200_TVE_IF_TIM2 0x500C
+#define AC200_TVE_IF_TIM3 0x500E
+#define AC200_TVE_IF_SYNC0 0x5010
+#define AC200_TVE_IF_SYNC1 0x5012
+#define AC200_TVE_IF_SYNC2 0x5014
+#define AC200_TVE_IF_TIM4 0x5016
+#define AC200_TVE_IF_STATUS 0x5018
+
+/* EPHY registers */
+#define AC200_EPHY_CTL 0x6000
+#define AC200_EPHY_BIST 0x6002
+
+/* eFuse registers (0x8000 - 0x9FFF, layout unknown) */
+
+/* RTC registers */
+#define AC200_LOSC_CTRL0 0xA000
+#define AC200_LOSC_CTRL1 0xA002
+#define AC200_LOSC_AUTO_SWT_STA 0xA004
+#define AC200_INTOSC_CLK_PRESCAL 0xA008
+#define AC200_RTC_YY_MM_DD0 0xA010
+#define AC200_RTC_YY_MM_DD1 0xA012
+#define AC200_RTC_HH_MM_SS0 0xA014
+#define AC200_RTC_HH_MM_SS1 0xA016
+#define AC200_ALARM0_CUR_VLU0 0xA024
+#define AC200_ALARM0_CUR_VLU1 0xA026
+#define AC200_ALARM0_ENABLE 0xA028
+#define AC200_ALARM0_IRQ_EN 0xA02C
+#define AC200_ALARM0_IRQ_STA 0xA030
+#define AC200_ALARM1_WK_HH_MM_SS0 0xA040
+#define AC200_ALARM1_WK_HH_MM_SS1 0xA042
+#define AC200_ALARM1_ENABLE 0xA044
+#define AC200_ALARM1_IRQ_EN 0xA048
+#define AC200_ALARM1_IRQ_STA 0xA04C
+#define AC200_ALARM_CONFIG 0xA050
+#define AC200_LOSC_OUT_GATING 0xA060
+#define AC200_GP_DATA(x) (0xA100 + (x) * 2)
+#define AC200_RTC_DEB 0xA170
+#define AC200_GPL_HOLD_OUTPUT 0xA180
+#define AC200_VDD_RTC 0xA190
+#define AC200_IC_CHARA0 0xA1F0
+#define AC200_IC_CHARA1 0xA1F2
+
+struct ac200_dev {
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+};
+
+#endif /* __LINUX_MFD_AC200_H */
--
2.35.3