build/patch/kernel/archive/sunxi-6.5/patches.megous/ARM-dts-sun8i-a83t-tbs-a711-Add-PN544-NFC-support.patch

67 lines
1.9 KiB
Diff
Raw Normal View History

From 4ef1207788689638f81a889482611b271a87f302 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
Date: Fri, 10 Nov 2017 14:33:28 +0100
Subject: [PATCH 019/464] ARM: dts: sun8i-a83t-tbs-a711: Add PN544 NFC support
Regulators on the schematic are named incorrectly. Both cameras are
is in fact connected to the dvdd-csi-f regulator and dvdd-csi-r is
in reality used for digital pad supply for NFC chip.
At the same time vcc-mipi regulator is not used for MIPI, but for NFC
VBAT power.
Interpreting schematics is an art form! :D
Signed-off-by: Ondrej Jirman <megi@xff.cz>
---
.../boot/dts/allwinner/sun8i-a83t-tbs-a711.dts | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
index 5c82f2617f8e..27fadde82be7 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-a83t-tbs-a711.dts
@@ -195,6 +195,16 @@ accelerometer@18 {
interrupt-parent = <&pio>;
interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
};
+
+ /* NFC (NPC 100) */
+ npc100: nfc@28 {
+ compatible = "nxp,nxp-nci-i2c";
+ reg = <0x28>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; /* PL6 */
+ enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
+ firmware-gpios = <&pio 3 3 GPIO_ACTIVE_HIGH>; /* PD3 */
+ };
};
&mmc0 {
@@ -377,9 +387,10 @@ &reg_dldo1 {
};
&reg_dldo2 {
- regulator-min-microvolt = <2800000>;
+ regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <4200000>;
- regulator-name = "vcc-mipi";
+ regulator-name = "vbat-nfc";
+ regulator-always-on;
};
&reg_dldo3 {
@@ -402,7 +413,8 @@ &reg_drivevbus {
&reg_eldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
- regulator-name = "dvdd-csi-r";
+ regulator-name = "pvdd-nfc";
+ regulator-always-on;
};
&reg_eldo2 {
--
2.34.1