aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dc60fd799b
build/patch/kernel/archive/mvebu-5.14/13-net-mvneta.patch

5568 lines
185 KiB
Diff
Raw Normal View History

添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
2023-09-19 11:24:52 +08:00
From b823238b0d4a57a7d1ba73fe52cf668a5a47749e Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Fri, 17 Sep 2021 10:40:04 +0100
Subject: net: phylink: don't call netif_carrier_off() with NULL netdev
Dan Carpenter points out that we have a code path that permits a NULL
netdev pointer to be passed to netif_carrier_off(), which will cause
a kernel oops. In any case, we need to set pl->old_link_state to false
to have the desired effect when there is no netdev present.
Fixes: f97493657c63 ("net: phylink: add suspend/resume support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 42e5a681183f..3f24deea367d 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1332,7 +1332,10 @@ void phylink_suspend(struct phylink *pl, bool mac_wol)
* but one would hope all packets have been sent. This
* also means phylink_resolve() will do nothing.
*/
- netif_carrier_off(pl->netdev);
+ if (pl->netdev)
+ netif_carrier_off(pl->netdev);
+ else
+ pl->old_link_state = false;
/* We do not call mac_link_down() here as we want the
* link to remain up to receive the WoL packets.
--
cgit v1.2.3
From 7e7049505ce1354295c5d543e06dfb417e997583 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 29 Nov 2019 21:41:56 +0000
Subject: net: phy: marvell10g: add downshift tunable support
Add support for the downshift tunable for the Marvell 88x3310 PHY.
Downshift is only usable with firmware 0.3.5.0 and later.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell10g.c | 101 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 100 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 53a433442803..e1ccb2acae84 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -22,6 +22,7 @@
* If both the fiber and copper ports are connected, the first to gain
* link takes priority and the other port is completely locked out.
*/
+#include <linux/bitfield.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/hwmon.h>
@@ -32,6 +33,8 @@
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
+#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d))
+
enum {
MV_PMA_FW_VER0 = 0xc011,
MV_PMA_FW_VER1 = 0xc012,
@@ -61,6 +64,15 @@ enum {
MV_PCS_CSCR1_MDIX_MDIX = 0x0020,
MV_PCS_CSCR1_MDIX_AUTO = 0x0060,
+ MV_PCS_DSC1 = 0x8003,
+ MV_PCS_DSC1_ENABLE = BIT(9),
+ MV_PCS_DSC1_10GBT = 0x01c0,
+ MV_PCS_DSC1_1GBR = 0x0038,
+ MV_PCS_DSC1_100BTX = 0x0007,
+ MV_PCS_DSC2 = 0x8004,
+ MV_PCS_DSC2_2P5G = 0xf000,
+ MV_PCS_DSC2_5G = 0x0f00,
+
MV_PCS_CSSR1 = 0x8008,
MV_PCS_CSSR1_SPD1_MASK = 0xc000,
MV_PCS_CSSR1_SPD1_SPD2 = 0xc000,
@@ -114,6 +126,7 @@ enum {
};
struct mv3310_chip {
+ bool (*has_downshift)(struct phy_device *phydev);
void (*init_supported_interfaces)(unsigned long *mask);
int (*get_mactype)(struct phy_device *phydev);
int (*init_interface)(struct phy_device *phydev, int mactype);
@@ -127,6 +140,7 @@ struct mv3310_priv {
DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX);
u32 firmware_ver;
+ bool has_downshift;
bool rate_match;
phy_interface_t const_interface;
@@ -319,6 +333,65 @@ static int mv3310_reset(struct phy_device *phydev, u32 unit)
5000, 100000, true);
}
+static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ int val;
+
+ if (!priv->has_downshift)
+ return -EOPNOTSUPP;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1);
+ if (val < 0)
+ return val;
+
+ if (val & MV_PCS_DSC1_ENABLE)
+ /* assume that all fields are the same */
+ *ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val);
+ else
+ *ds = DOWNSHIFT_DEV_DISABLE;
+
+ return 0;
+}
+
+static int mv3310_set_downshift(struct phy_device *phydev, u8 ds)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ u16 val;
+ int err;
+
+ if (!priv->has_downshift)
+ return -EOPNOTSUPP;
+
+ if (ds == DOWNSHIFT_DEV_DISABLE)
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
+ MV_PCS_DSC1_ENABLE);
+
+ /* FIXME: The default is disabled, so should we disable? */
+ if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT)
+ ds = 2;
+
+ if (ds > 8)
+ return -E2BIG;
+
+ ds -= 1;
+ val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds);
+ val |= FIELD_PREP(MV_PCS_DSC2_5G, ds);
+ err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2,
+ MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val);
+ if (err < 0)
+ return err;
+
+ val = MV_PCS_DSC1_ENABLE;
+ val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds);
+ val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds);
+ val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds);
+
+ return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
+ MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT |
+ MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val);
+}
+
static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd)
{
int val;
@@ -437,6 +510,9 @@ static int mv3310_probe(struct phy_device *phydev)
priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
(priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
+ if (chip->has_downshift)
+ priv->has_downshift = chip->has_downshift(phydev);
+
/* Powering down the port when not in use saves about 600mW */
ret = mv3310_power_down(phydev);
if (ret)
@@ -605,7 +681,16 @@ static int mv3310_config_init(struct phy_device *phydev)
}
/* Enable EDPD mode - saving 600mW */
- return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+ err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
+ if (err)
+ return err;
+
+ /* Allow downshift */
+ err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT);
+ if (err && err != -EOPNOTSUPP)
+ return err;
+
+ return 0;
}
static int mv3310_get_features(struct phy_device *phydev)
@@ -875,6 +960,8 @@ static int mv3310_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data)
{
switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return mv3310_get_downshift(phydev, data);
case ETHTOOL_PHY_EDPD:
return mv3310_get_edpd(phydev, data);
default:
@@ -886,6 +973,8 @@ static int mv3310_set_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, const void *data)
{
switch (tuna->id) {
+ case ETHTOOL_PHY_DOWNSHIFT:
+ return mv3310_set_downshift(phydev, *(u8 *)data);
case ETHTOOL_PHY_EDPD:
return mv3310_set_edpd(phydev, *(u16 *)data);
default:
@@ -893,6 +982,14 @@ static int mv3310_set_tunable(struct phy_device *phydev,
}
}
+static bool mv3310_has_downshift(struct phy_device *phydev)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+
+ /* Fails to downshift with firmware older than v0.3.5.0 */
+ return priv->firmware_ver >= MV_VERSION(0,3,5,0);
+}
+
static void mv3310_init_supported_interfaces(unsigned long *mask)
{
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
@@ -932,6 +1029,7 @@ static void mv2111_init_supported_interfaces(unsigned long *mask)
}
static const struct mv3310_chip mv3310_type = {
+ .has_downshift = mv3310_has_downshift,
.init_supported_interfaces = mv3310_init_supported_interfaces,
.get_mactype = mv3310_get_mactype,
.init_interface = mv3310_init_interface,
@@ -942,6 +1040,7 @@ static const struct mv3310_chip mv3310_type = {
};
static const struct mv3310_chip mv3340_type = {
+ .has_downshift = mv3310_has_downshift,
.init_supported_interfaces = mv3340_init_supported_interfaces,
.get_mactype = mv3310_get_mactype,
.init_interface = mv3340_init_interface,
--
cgit v1.2.3
From cb91cf67515d694cdbb3253f3a96121d40efe774 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 30 Jan 2020 22:42:38 +0000
Subject: net: dpaa2-mac: add support for more ethtool 10G link modes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Phylink documentation says:
Note that the PHY may be able to transform from one connection
technology to another, so, eg, don't clear 1000BaseX just
because the MAC is unable to BaseX mode. This is more about
clearing unsupported speeds and duplex settings. The port modes
should not be cleared; phylink_set_port_modes() will help with this.
So add the missing 10G modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Marek Behún <kabel@kernel.org>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ae6d382d8735..a882f7e6639a 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct phylink_config *config,
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_USXGMII:
phylink_set(mask, 10000baseT_Full);
+ phylink_set(mask, 10000baseKR_Full);
+ phylink_set(mask, 10000baseCR_Full);
+ phylink_set(mask, 10000baseSR_Full);
+ phylink_set(mask, 10000baseLR_Full);
+ phylink_set(mask, 10000baseLRM_Full);
+ phylink_set(mask, 10000baseER_Full);
if (state->interface == PHY_INTERFACE_MODE_10GBASER)
break;
phylink_set(mask, 5000baseT_Full);
--
cgit v1.2.3
From 382d7f7a824efb3db405f94c55769122622b887f Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 20 Jul 2021 15:15:40 +0100
Subject: net: phylink: add phylink_set_10g_modes() helper
Add a helper for setting 10Gigabit modes, so we have one central
place that sets all appropriate 10G modes for a driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 11 +++++++++++
include/linux/phylink.h | 1 +
2 files changed, 12 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 3f24deea367d..3bf8865e9e82 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -132,6 +132,17 @@ void phylink_set_port_modes(unsigned long *mask)
}
EXPORT_SYMBOL_GPL(phylink_set_port_modes);
+void phylink_set_10g_modes(unsigned long *mask)
+{
+ phylink_set(mask, 10000baseT_Full);
+ phylink_set(mask, 10000baseCR_Full);
+ phylink_set(mask, 10000baseSR_Full);
+ phylink_set(mask, 10000baseLR_Full);
+ phylink_set(mask, 10000baseLRM_Full);
+ phylink_set(mask, 10000baseER_Full);
+}
+EXPORT_SYMBOL_GPL(phylink_set_10g_modes);
+
static int phylink_is_empty_linkmode(const unsigned long *linkmode)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 237291196ce2..f7b5ed06a815 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -484,6 +484,7 @@ int phylink_speed_up(struct phylink *pl);
#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)
void phylink_set_port_modes(unsigned long *bits);
+void phylink_set_10g_modes(unsigned long *mask);
void phylink_helper_basex_speed(struct phylink_link_state *state);
void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
--
cgit v1.2.3
From 4cad7d702c5de9f47243e9cd9975df86fc39f607 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 20 Jul 2021 15:20:28 +0100
Subject: net: ethernet: use phylink_set_10g_modes()
Update three drivers to use the new phylink_set_10g_modes() helper:
Cadence macb, Freescale DPAA2 and Marvell PP2.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/cadence/macb_main.c | 7 +------
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 7 +------
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 7 +------
3 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 7d2fe13a52f8..15b55ade29bc 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -547,13 +547,8 @@ static void macb_validate(struct phylink_config *config,
if (bp->caps & MACB_CAPS_GIGABIT_MODE_AVAILABLE &&
(state->interface == PHY_INTERFACE_MODE_NA ||
state->interface == PHY_INTERFACE_MODE_10GBASER)) {
- phylink_set(mask, 10000baseCR_Full);
- phylink_set(mask, 10000baseER_Full);
+ phylink_set_10g_modes(mask);
phylink_set(mask, 10000baseKR_Full);
- phylink_set(mask, 10000baseLR_Full);
- phylink_set(mask, 10000baseLRM_Full);
- phylink_set(mask, 10000baseSR_Full);
- phylink_set(mask, 10000baseT_Full);
if (state->interface != PHY_INTERFACE_MODE_NA)
goto out;
}
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index a882f7e6639a..3faf45c22c19 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -139,13 +139,8 @@ static void dpaa2_mac_validate(struct phylink_config *config,
case PHY_INTERFACE_MODE_NA:
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_USXGMII:
- phylink_set(mask, 10000baseT_Full);
+ phylink_set_10g_modes(mask);
phylink_set(mask, 10000baseKR_Full);
- phylink_set(mask, 10000baseCR_Full);
- phylink_set(mask, 10000baseSR_Full);
- phylink_set(mask, 10000baseLR_Full);
- phylink_set(mask, 10000baseLRM_Full);
- phylink_set(mask, 10000baseER_Full);
if (state->interface == PHY_INTERFACE_MODE_10GBASER)
break;
phylink_set(mask, 5000baseT_Full);
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 3229bafa2a2c..76753db2be48 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6286,12 +6286,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
case PHY_INTERFACE_MODE_XAUI:
case PHY_INTERFACE_MODE_NA:
if (mvpp2_port_supports_xlg(port)) {
- phylink_set(mask, 10000baseT_Full);
- phylink_set(mask, 10000baseCR_Full);
- phylink_set(mask, 10000baseSR_Full);
- phylink_set(mask, 10000baseLR_Full);
- phylink_set(mask, 10000baseLRM_Full);
- phylink_set(mask, 10000baseER_Full);
+ phylink_set_10g_modes(mask);
phylink_set(mask, 10000baseKR_Full);
}
if (state->interface != PHY_INTERFACE_MODE_NA)
--
cgit v1.2.3
From 3ab4988c8312433944800964545fdaa63bd5ba90 Mon Sep 17 00:00:00 2001
From: Robert Hancock <robert.hancock@calian.com>
Date: Wed, 30 Jun 2021 11:49:27 -0600
Subject: net: phylink: Support disabling autonegotiation for PCS
The auto-negotiation state in the PCS as set by
phylink_mii_c22_pcs_config was previously always enabled when the
driver is configured for in-band autonegotiation, even if
autonegotiation was disabled on the interface with ethtool. Update the
code to set the BMCR_ANENABLE bit based on the interface's
autonegotiation enabled state.
Update phylink_mii_c22_pcs_get_state to not check
autonegotiation-related fields when autonegotiation is disabled.
Update phylink_mac_pcs_get_state to initialize the state based on the
interface's configured speed, duplex and pause parameters rather than
to unknown when autonegotiation is disabled, before calling the
driver's pcs_get_state functions, as they are not likely to provide
meaningful data for these fields when autonegotiation is disabled. In
this case the driver is really just filling in the link state field.
Note that in cases where there is a downstream PHY connected, such as
with SGMII and a copper PHY, the configuration set by ethtool is
handled by phy_ethtool_ksettings_set and not propagated to the PCS.
This is correct since SGMII or 1000Base-X autonegotiation with the PCS
should normally still be used even if the copper side has disabled it.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 3bf8865e9e82..1f3f5ca2e5cf 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -551,9 +551,15 @@ static void phylink_mac_pcs_get_state(struct phylink *pl,
linkmode_zero(state->lp_advertising);
state->interface = pl->link_config.interface;
state->an_enabled = pl->link_config.an_enabled;
- state->speed = SPEED_UNKNOWN;
- state->duplex = DUPLEX_UNKNOWN;
- state->pause = MLO_PAUSE_NONE;
+ if (state->an_enabled) {
+ state->speed = SPEED_UNKNOWN;
+ state->duplex = DUPLEX_UNKNOWN;
+ state->pause = MLO_PAUSE_NONE;
+ } else {
+ state->speed = pl->link_config.speed;
+ state->duplex = pl->link_config.duplex;
+ state->pause = pl->link_config.pause;
+ }
state->an_complete = 0;
state->link = 1;
@@ -2518,7 +2524,10 @@ void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
state->link = !!(bmsr & BMSR_LSTATUS);
state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
- if (!state->link)
+ /* If there is no link or autonegotiation is disabled, the LP advertisement
+ * data is not meaningful, so don't go any further.
+ */
+ if (!state->link || !state->an_enabled)
return;
switch (state->interface) {
@@ -2641,7 +2650,9 @@ int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
changed = ret > 0;
/* Ensure ISOLATE bit is disabled */
- bmcr = mode == MLO_AN_INBAND ? BMCR_ANENABLE : 0;
+ bmcr = (mode == MLO_AN_INBAND &&
+ linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) ?
+ BMCR_ANENABLE : 0;
ret = mdiobus_modify(pcs->bus, pcs->addr, MII_BMCR,
BMCR_ANENABLE | BMCR_ISOLATE, bmcr);
if (ret < 0)
--
cgit v1.2.3
From 1a6300b528fb4507da11af3173e40dcae0d53e76 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 8 Jun 2021 15:53:31 +0100
Subject: net: phylink: add phy change pause mode debug
Augment the phy link debug prints with the pause state.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1f3f5ca2e5cf..876c1a461d6b 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -960,10 +960,11 @@ static void phylink_phy_change(struct phy_device *phydev, bool up)
phylink_run_resolve(pl);
- phylink_dbg(pl, "phy link %s %s/%s/%s\n", up ? "up" : "down",
+ phylink_dbg(pl, "phy link %s %s/%s/%s/%s\n", up ? "up" : "down",
phy_modes(phydev->interface),
phy_speed_to_str(phydev->speed),
- phy_duplex_to_str(phydev->duplex));
+ phy_duplex_to_str(phydev->duplex),
+ phylink_pause_to_str(pl->phy_state.pause));
}
static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
--
cgit v1.2.3
From 2b5d092a5727f4d0931b3c3823e5013f74024180 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 8 Jun 2021 15:57:30 +0100
Subject: net: phylink: cleanup ksettings_set
We only need to fiddle about with the supported mask after we have
validated the user's requested parameters. Simplify and streamline the
code by moving the linkmode copy and update of the autoneg bit after
validating the user's request.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 876c1a461d6b..b5b9342b49d7 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1560,15 +1560,11 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
return phy_ethtool_ksettings_set(pl->phydev, kset);
}
- linkmode_copy(support, pl->supported);
config = pl->link_config;
- config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE;
- /* Mask out unsupported advertisements, and force the autoneg bit */
+ /* Mask out unsupported advertisements */
linkmode_and(config.advertising, kset->link_modes.advertising,
- support);
- linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
- config.an_enabled);
+ pl->supported);
/* FIXME: should we reject autoneg if phy/mac does not support it? */
switch (kset->base.autoneg) {
@@ -1577,7 +1573,7 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
* duplex.
*/
s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
- support, false);
+ pl->supported, false);
if (!s)
return -EINVAL;
@@ -1618,6 +1614,12 @@ int phylink_ethtool_ksettings_set(struct phylink *pl,
/* We have ruled out the case with a PHY attached, and the
* fixed-link cases. All that is left are in-band links.
*/
+ config.an_enabled = kset->base.autoneg == AUTONEG_ENABLE;
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising,
+ config.an_enabled);
+
+ /* Validate without changing the current supported mask. */
+ linkmode_copy(support, pl->supported);
if (phylink_validate(pl, support, &config))
return -EINVAL;
--
cgit v1.2.3
From f1d717845dc84420883e9853a588a5bd60ba93b2 Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Tue, 8 Jun 2021 14:43:54 +0100
Subject: net: phy: add phy_interface_t bitmap support
Add support for a bitmap for phy interface modes, which includes:
- a macro to declare the interface bitmap
- an inline helper to zero the interface bitmap
- an inline helper to detect an empty interface bitmap
- an inline helper to do a bitwise AND operation on two interface
bitmaps
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
include/linux/phy.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3b80dc3ed68b..1472657a8136 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -155,6 +155,26 @@ typedef enum {
PHY_INTERFACE_MODE_MAX,
} phy_interface_t;
+/* PHY interface mode bitmap handling */
+#define DECLARE_PHY_INTERFACE_MASK(name) \
+ DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX)
+
+static inline void phy_interface_zero(unsigned long *intf)
+{
+ bitmap_zero(intf, PHY_INTERFACE_MODE_MAX);
+}
+
+static inline bool phy_interface_empty(const unsigned long *intf)
+{
+ return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX);
+}
+
+static inline void phy_interface_and(unsigned long *dst, const unsigned long *a,
+ const unsigned long *b)
+{
+ bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX);
+}
+
/*
* phy_supported_speeds - return all speeds currently supported by a PHY device
*/
--
cgit v1.2.3
From 7072ef48e86ddb063bf8f509a89c54090d84c1b3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 11:57:39 +0000
Subject: net: sfp: augment SFP parsing with phy_interface_t bitmap
We currently parse the SFP EEPROM to a bitmap of ethtool link modes,
and then attempt to convert the link modes to a PHY interface mode.
While this works at present, there are cases where this is sub-optimal.
For example, where a module can operate with several different PHY
interface modes.
To start addressing this, arrange for the SFP EEPROM parsing to also
provide a bitmap of the possible PHY interface modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell-88x2222.c | 3 +-
drivers/net/phy/marvell10g.c | 3 +-
drivers/net/phy/phylink.c | 4 ++-
drivers/net/phy/sfp-bus.c | 76 +++++++++++++++++++++++++++++----------
include/linux/sfp.h | 5 +--
5 files changed, 67 insertions(+), 24 deletions(-)
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index d8b31d4d2a73..ae285e4225d6 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -478,6 +478,7 @@ static int mv2222_config_init(struct phy_device *phydev)
static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
{
+ DECLARE_PHY_INTERFACE_MASK(interfaces);
struct phy_device *phydev = upstream;
phy_interface_t sfp_interface;
struct mv2222_data *priv;
@@ -489,7 +490,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
priv = (struct mv2222_data *)phydev->priv;
dev = &phydev->mdio.dev;
- sfp_parse_support(phydev->sfp_bus, id, sfp_supported);
+ sfp_parse_support(phydev->sfp_bus, id, sfp_supported, interfaces);
sfp_interface = sfp_select_interface(phydev->sfp_bus, sfp_supported);
dev_info(dev, "%s SFP module inserted\n", phy_modes(sfp_interface));
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index e1ccb2acae84..eff980b94c95 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -449,9 +449,10 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
{
struct phy_device *phydev = upstream;
__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ DECLARE_PHY_INTERFACE_MASK(interfaces);
phy_interface_t iface;
- sfp_parse_support(phydev->sfp_bus, id, support);
+ sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
iface = sfp_select_interface(phydev->sfp_bus, support);
if (iface != PHY_INTERFACE_MODE_10GBASER) {
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index b5b9342b49d7..a0a21cf530f4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -77,6 +77,7 @@ struct phylink {
struct sfp_bus *sfp_bus;
bool sfp_may_have_phy;
+ DECLARE_PHY_INTERFACE_MASK(sfp_interfaces);
__ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
u8 sfp_port;
};
@@ -2242,7 +2243,8 @@ static int phylink_sfp_module_insert(void *upstream,
ASSERT_RTNL();
linkmode_zero(support);
- sfp_parse_support(pl->sfp_bus, id, support);
+ phy_interface_zero(pl->sfp_interfaces);
+ sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces);
pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
/* If this module may have a PHY connecting later, defer until later */
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 7362f8c3271c..21b5f8badfeb 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -13,7 +13,8 @@
struct sfp_quirk {
const char *vendor;
const char *part;
- void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes);
+ void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes,
+ unsigned long *interfaces);
};
/**
@@ -39,13 +40,15 @@ struct sfp_bus {
};
static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
- unsigned long *modes)
+ unsigned long *modes, unsigned long *interfaces)
{
phylink_set(modes, 2500baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
}
static void sfp_quirk_ubnt_uf_instant(const struct sfp_eeprom_id *id,
- unsigned long *modes)
+ unsigned long *modes,
+ unsigned long *interfaces)
{
/* Ubiquiti U-Fiber Instant module claims that support all transceiver
* types including 10G Ethernet which is not truth. So clear all claimed
@@ -226,12 +229,14 @@ EXPORT_SYMBOL_GPL(sfp_may_have_phy);
* @bus: a pointer to the &struct sfp_bus structure for the sfp module
* @id: a pointer to the module's &struct sfp_eeprom_id
* @support: pointer to an array of unsigned long for the ethtool support mask
+ * @interfaces: pointer to an array of unsigned long for phy interface modes
+ * mask
*
* Parse the EEPROM identification information and derive the supported
* ethtool link modes for the module.
*/
void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- unsigned long *support)
+ unsigned long *support, unsigned long *interfaces)
{
unsigned int br_min, br_nom, br_max;
__ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };
@@ -258,27 +263,41 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
}
/* Set ethtool support from the compliance fields. */
- if (id->base.e10g_base_sr)
+ if (id->base.e10g_base_sr) {
phylink_set(modes, 10000baseSR_Full);
- if (id->base.e10g_base_lr)
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
+ if (id->base.e10g_base_lr) {
phylink_set(modes, 10000baseLR_Full);
- if (id->base.e10g_base_lrm)
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
+ if (id->base.e10g_base_lrm) {
phylink_set(modes, 10000baseLRM_Full);
- if (id->base.e10g_base_er)
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
+ if (id->base.e10g_base_er) {
phylink_set(modes, 10000baseER_Full);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
if (id->base.e1000_base_sx ||
id->base.e1000_base_lx ||
- id->base.e1000_base_cx)
+ id->base.e1000_base_cx) {
phylink_set(modes, 1000baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ }
if (id->base.e1000_base_t) {
phylink_set(modes, 1000baseT_Half);
phylink_set(modes, 1000baseT_Full);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, interfaces);
}
/* 1000Base-PX or 1000Base-BX10 */
if ((id->base.e_base_px || id->base.e_base_bx10) &&
- br_min <= 1300 && br_max >= 1200)
+ br_min <= 1300 && br_max >= 1200) {
phylink_set(modes, 1000baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ }
/* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */
if (id->base.e100_base_fx || id->base.e100_base_lx)
@@ -291,21 +310,30 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
*/
if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
/* This may look odd, but some manufacturers use 12000MBd */
- if (br_min <= 12000 && br_max >= 10300)
+ if (br_min <= 12000 && br_max >= 10300) {
phylink_set(modes, 10000baseCR_Full);
- if (br_min <= 3200 && br_max >= 3100)
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
+ if (br_min <= 3200 && br_max >= 3100) {
phylink_set(modes, 2500baseX_Full);
- if (br_min <= 1300 && br_max >= 1200)
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+ }
+ if (br_min <= 1300 && br_max >= 1200) {
phylink_set(modes, 1000baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ }
}
if (id->base.sfp_ct_passive) {
- if (id->base.passive.sff8431_app_e)
+ if (id->base.passive.sff8431_app_e) {
phylink_set(modes, 10000baseCR_Full);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
+ }
}
if (id->base.sfp_ct_active) {
if (id->base.active.sff8431_app_e ||
id->base.active.sff8431_lim) {
phylink_set(modes, 10000baseCR_Full);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
}
}
@@ -330,12 +358,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
case SFF8024_ECC_10GBASE_T_SFI:
case SFF8024_ECC_10GBASE_T_SR:
phylink_set(modes, 10000baseT_Full);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
break;
case SFF8024_ECC_5GBASE_T:
phylink_set(modes, 5000baseT_Full);
break;
case SFF8024_ECC_2_5GBASE_T:
phylink_set(modes, 2500baseT_Full);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
break;
default:
dev_warn(bus->sfp_dev,
@@ -348,10 +378,14 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
if (id->base.fc_speed_100 ||
id->base.fc_speed_200 ||
id->base.fc_speed_400) {
- if (id->base.br_nominal >= 31)
+ if (id->base.br_nominal >= 31) {
phylink_set(modes, 2500baseX_Full);
- if (id->base.br_nominal >= 12)
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+ }
+ if (id->base.br_nominal >= 12) {
phylink_set(modes, 1000baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ }
}
/* If we haven't discovered any modes that this module supports, try
@@ -364,14 +398,18 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
* 2500BASE-X, so we allow some slack here.
*/
if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS) && br_nom) {
- if (br_min <= 1300 && br_max >= 1200)
+ if (br_min <= 1300 && br_max >= 1200) {
phylink_set(modes, 1000baseX_Full);
- if (br_min <= 3200 && br_max >= 2500)
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
+ }
+ if (br_min <= 3200 && br_max >= 2500) {
phylink_set(modes, 2500baseX_Full);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
+ }
}
if (bus->sfp_quirk)
- bus->sfp_quirk->modes(id, modes);
+ bus->sfp_quirk->modes(id, modes, interfaces);
bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index 302094b855fb..d1f343853b6c 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -535,7 +535,7 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
unsigned long *support);
bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- unsigned long *support);
+ unsigned long *support, unsigned long *interfaces);
phy_interface_t sfp_select_interface(struct sfp_bus *bus,
unsigned long *link_modes);
@@ -568,7 +568,8 @@ static inline bool sfp_may_have_phy(struct sfp_bus *bus,
static inline void sfp_parse_support(struct sfp_bus *bus,
const struct sfp_eeprom_id *id,
- unsigned long *support)
+ unsigned long *support,
+ unsigned long *interfaces)
{
}
--
cgit v1.2.3
From 03a6c744372a8682f913dff44a874c2c2d01cfd6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 12:12:43 +0000
Subject: net: phylink: add mac PHY interface bitmap
Add a PHY interface bitmap for the MAC driver to specify which PHY
interfaces are supported to phylink.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
include/linux/phylink.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index f7b5ed06a815..bc4b866cd99b 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -76,6 +76,7 @@ struct phylink_config {
bool ovr_an_inband;
void (*get_fixed_state)(struct phylink_config *config,
struct phylink_link_state *state);
+ DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
};
/**
--
cgit v1.2.3
From b1f7bec7a2c8b3bd05258fd2f8fd739d36f758d2 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 12:12:43 +0000
Subject: net: phylink: use phy interface mode bitmaps for optical modules
Where a MAC provides the PHY interface mode capabilities, use the PHY
interface mode bitmaps to select the operating interface mode for
optical SFP modules, rather than using the linkmode bitmaps.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 56 +++++++++++++++++++++++++++++++++++++++++------
1 file changed, 49 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index a0a21cf530f4..c721ef6dda2e 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2152,6 +2152,41 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
pl->netdev->sfp_bus = NULL;
}
+static const phy_interface_t phylink_sfp_interface_preference[] = {
+ PHY_INTERFACE_MODE_USXGMII,
+ PHY_INTERFACE_MODE_10GBASER,
+ PHY_INTERFACE_MODE_10GKR,
+ PHY_INTERFACE_MODE_2500BASEX,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_1000BASEX,
+};
+
+static phy_interface_t phylink_select_interface(struct phylink *pl,
+ const unsigned long *intf,
+ const char *intf_name)
+{
+ DECLARE_PHY_INTERFACE_MASK(u);
+ phy_interface_t interface;
+ size_t i;
+
+ phy_interface_and(u, intf, pl->config->supported_interfaces);
+
+ interface = PHY_INTERFACE_MODE_NA;
+ for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++)
+ if (test_bit(phylink_sfp_interface_preference[i], u)) {
+ interface = phylink_sfp_interface_preference[i];
+ break;
+ }
+
+ phylink_info(pl, "interfaces=[mac=%*pbl %s=%*pbl] selected %d (%s)\n",
+ (int)PHY_INTERFACE_MODE_MAX,
+ pl->config->supported_interfaces,
+ intf_name, (int)PHY_INTERFACE_MODE_MAX, intf,
+ interface, phy_modes(interface));
+
+ return interface;
+}
+
static int phylink_sfp_config(struct phylink *pl, u8 mode,
const unsigned long *supported,
const unsigned long *advertising)
@@ -2234,25 +2269,33 @@ static int phylink_sfp_config(struct phylink *pl, u8 mode,
return ret;
}
+static int phylink_sfp_config_nophy(struct phylink *pl)
+{
+ if (!phy_interface_empty(pl->config->supported_interfaces))
+ phylink_select_interface(pl, pl->sfp_interfaces, "sfp");
+
+ return phylink_sfp_config(pl, MLO_AN_INBAND,
+ pl->sfp_support, pl->sfp_support);
+}
+
static int phylink_sfp_module_insert(void *upstream,
const struct sfp_eeprom_id *id)
{
struct phylink *pl = upstream;
- unsigned long *support = pl->sfp_support;
ASSERT_RTNL();
- linkmode_zero(support);
+ linkmode_zero(pl->sfp_support);
phy_interface_zero(pl->sfp_interfaces);
- sfp_parse_support(pl->sfp_bus, id, support, pl->sfp_interfaces);
- pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
+ sfp_parse_support(pl->sfp_bus, id, pl->sfp_support, pl->sfp_interfaces);
+ pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, pl->sfp_support);
/* If this module may have a PHY connecting later, defer until later */
pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
if (pl->sfp_may_have_phy)
return 0;
- return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
+ return phylink_sfp_config_nophy(pl);
}
static int phylink_sfp_module_start(void *upstream)
@@ -2271,8 +2314,7 @@ static int phylink_sfp_module_start(void *upstream)
if (!pl->sfp_may_have_phy)
return 0;
- return phylink_sfp_config(pl, MLO_AN_INBAND,
- pl->sfp_support, pl->sfp_support);
+ return phylink_sfp_config_nophy(pl);
}
static void phylink_sfp_module_stop(void *upstream)
--
cgit v1.2.3
From 696b4e39df4792ab9638c87972167fdf8376bdda Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 12:15:38 +0000
Subject: net: mvneta: fill in phy interface mode bitmap
Fill in the phy interface mode bitmap for the Marvell mvneta driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index de32e5b49053..697207b88444 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -5172,6 +5172,22 @@ static int mvneta_probe(struct platform_device *pdev)
pp->phylink_config.dev = &dev->dev;
pp->phylink_config.type = PHYLINK_NETDEV;
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_ID,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_RXID,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_TXID,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_QSGMII,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ pp->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ pp->phylink_config.supported_interfaces);
phylink = phylink_create(&pp->phylink_config, pdev->dev.fwnode,
phy_mode, &mvneta_phylink_ops);
--
cgit v1.2.3
From b096813a94db41df365a1b9a20e4de7176b185ff Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 12:15:38 +0000
Subject: net: mvpp2: fill in phy interface mode bitmap
Fill in the phy interface mode bitmap for the Marvell mvpp2 driver, so
phylink can know which interfaces are supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 76753db2be48..dd7e2c17a5be 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6923,6 +6923,29 @@ static int mvpp2_port_probe(struct platform_device *pdev,
port->phylink_config.dev = &dev->dev;
port->phylink_config.type = PHYLINK_NETDEV;
+ if (mvpp2_port_supports_xlg(port)) {
+ __set_bit(PHY_INTERFACE_MODE_10GBASER,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_XAUI,
+ port->phylink_config.supported_interfaces);
+ }
+ if (mvpp2_port_supports_rgmii(port)) {
+ __set_bit(PHY_INTERFACE_MODE_RGMII,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_ID,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_TXID,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_RXID,
+ port->phylink_config.supported_interfaces);
+ }
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ port->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ port->phylink_config.supported_interfaces);
+
phylink = phylink_create(&port->phylink_config, port_fwnode,
phy_mode, &mvpp2_phylink_ops);
if (IS_ERR(phylink)) {
--
cgit v1.2.3
From e77daa70521c36402efe3f87951852358182bc08 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Tue, 20 Oct 2020 19:09:11 +0200
Subject: net: dsa: fill phylink's config supported_interfaces member
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Add a new DSA switch operation, phylink_get_interfaces, which should
fill in which PHY_INTERFACE_MODE_* are supported by given port.
Use this before phylink_create to fill phylink's config
supported_interfaces member.
This allows for phylink to determine which PHY_INTERFACE_MODE to use
with SFP modules.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
include/net/dsa.h | 2 ++
net/dsa/slave.c | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 33f40c1ec379..07b29d4b4336 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -592,6 +592,8 @@ struct dsa_switch_ops {
/*
* PHYLINK integration
*/
+ void (*phylink_get_interfaces)(struct dsa_switch *ds, int port,
+ unsigned long *supported_interfaces);
void (*phylink_validate)(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state);
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index 23be8e01026b..64005bfecd23 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1773,6 +1773,10 @@ static int dsa_slave_phy_setup(struct net_device *slave_dev)
dp->pl_config.poll_fixed_state = true;
}
+ if (ds->ops->phylink_get_interfaces)
+ ds->ops->phylink_get_interfaces(ds, dp->index,
+ dp->pl_config.supported_interfaces);
+
dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode,
&dsa_port_phylink_mac_ops);
if (IS_ERR(dp->pl)) {
--
cgit v1.2.3
From 58339cd013b7e37739c54d06b2e9f226d99d2f50 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <kabel@kernel.org>
Date: Tue, 20 Oct 2020 19:09:12 +0200
Subject: net: dsa: mv88e6xxx: implement .phylink_get_interfaces operation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Implement the .phylink_get_interfaces method for mv88e6xxx driver.
We are currently only interested in SGMII, 1000base-x and 2500base-x
modes (for the SFP code). USXGMII and 10gbase-r can be added later for
Amethyst. XAUI and RXAUI are irrelevant for SFP (but maybe not for
QSFP?).
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/mv88e6xxx/chip.c | 57 ++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/mv88e6xxx/chip.h | 2 ++
2 files changed, 59 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 272b0535d946..c088915f1feb 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -683,6 +683,50 @@ static void mv88e6xxx_validate(struct dsa_switch *ds, int port,
phylink_helper_basex_speed(state);
}
+static void mv88e6352_phylink_get_interfaces(struct mv88e6xxx_chip *chip,
+ int port,
+ unsigned long *supported)
+{
+ if (mv88e6xxx_serdes_get_lane(chip, port)) {
+ /* FIXME: does code for 6352 family support changing between
+ * SGMII and 1000base-x?
+ */
+ __set_bit(PHY_INTERFACE_MODE_SGMII, supported);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
+ }
+}
+
+static void mv88e6341_phylink_get_interfaces(struct mv88e6xxx_chip *chip,
+ int port,
+ unsigned long *supported)
+{
+ if (port == 5) {
+ __set_bit(PHY_INTERFACE_MODE_SGMII, supported);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
+ }
+}
+
+static void mv88e6390_phylink_get_interfaces(struct mv88e6xxx_chip *chip,
+ int port,
+ unsigned long *supported)
+{
+ if (port == 9 || port == 10) {
+ __set_bit(PHY_INTERFACE_MODE_SGMII, supported);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, supported);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, supported);
+ }
+}
+
+static void mv88e6xxx_get_interfaces(struct dsa_switch *ds, int port,
+ unsigned long *supported)
+{
+ struct mv88e6xxx_chip *chip = ds->priv;
+
+ if (chip->info->ops->phylink_get_interfaces)
+ chip->info->ops->phylink_get_interfaces(chip, port, supported);
+}
+
static void mv88e6xxx_mac_config(struct dsa_switch *ds, int port,
unsigned int mode,
const struct phylink_link_state *state)
@@ -3628,6 +3672,7 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.serdes_get_stats = mv88e6390_serdes_get_stats,
.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
.serdes_get_regs = mv88e6390_serdes_get_regs,
+ .phylink_get_interfaces = mv88e6341_phylink_get_interfaces,
.phylink_validate = mv88e6341_phylink_validate,
};
@@ -3803,6 +3848,7 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
.serdes_get_regs_len = mv88e6352_serdes_get_regs_len,
.serdes_get_regs = mv88e6352_serdes_get_regs,
.gpio_ops = &mv88e6352_gpio_ops,
+ .phylink_get_interfaces = mv88e6352_phylink_get_interfaces,
.phylink_validate = mv88e6352_phylink_validate,
};
@@ -3903,6 +3949,7 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
.serdes_get_regs_len = mv88e6352_serdes_get_regs_len,
.serdes_get_regs = mv88e6352_serdes_get_regs,
.gpio_ops = &mv88e6352_gpio_ops,
+ .phylink_get_interfaces = mv88e6352_phylink_get_interfaces,
.phylink_validate = mv88e6352_phylink_validate,
};
@@ -4004,6 +4051,7 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
.serdes_get_regs = mv88e6390_serdes_get_regs,
.gpio_ops = &mv88e6352_gpio_ops,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390_phylink_validate,
};
@@ -4065,6 +4113,7 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
.serdes_get_regs = mv88e6390_serdes_get_regs,
.gpio_ops = &mv88e6352_gpio_ops,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390x_phylink_validate,
};
@@ -4125,6 +4174,7 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.serdes_get_regs = mv88e6390_serdes_get_regs,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390_phylink_validate,
};
@@ -4185,6 +4235,7 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6352_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
+ .phylink_get_interfaces = mv88e6352_phylink_get_interfaces,
.phylink_validate = mv88e6352_phylink_validate,
};
@@ -4287,6 +4338,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390_phylink_validate,
};
@@ -4439,6 +4491,7 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.serdes_get_stats = mv88e6390_serdes_get_stats,
.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
.serdes_get_regs = mv88e6390_serdes_get_regs,
+ .phylink_get_interfaces = mv88e6341_phylink_get_interfaces,
.phylink_validate = mv88e6341_phylink_validate,
};
@@ -4588,6 +4641,7 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.serdes_get_stats = mv88e6352_serdes_get_stats,
.serdes_get_regs_len = mv88e6352_serdes_get_regs_len,
.serdes_get_regs = mv88e6352_serdes_get_regs,
+ .phylink_get_interfaces = mv88e6352_phylink_get_interfaces,
.phylink_validate = mv88e6352_phylink_validate,
};
@@ -4653,6 +4707,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.serdes_get_stats = mv88e6390_serdes_get_stats,
.serdes_get_regs_len = mv88e6390_serdes_get_regs_len,
.serdes_get_regs = mv88e6390_serdes_get_regs,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390_phylink_validate,
};
@@ -4717,6 +4772,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
+ .phylink_get_interfaces = mv88e6390_phylink_get_interfaces,
.phylink_validate = mv88e6390x_phylink_validate,
};
@@ -6072,6 +6128,7 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
.change_tag_protocol = mv88e6xxx_change_tag_protocol,
.setup = mv88e6xxx_setup,
.teardown = mv88e6xxx_teardown,
+ .phylink_get_interfaces = mv88e6xxx_get_interfaces,
.port_setup = mv88e6xxx_port_setup,
.port_teardown = mv88e6xxx_port_teardown,
.phylink_validate = mv88e6xxx_validate,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 675b1f3e43b7..601c995cf4c7 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -599,6 +599,8 @@ struct mv88e6xxx_ops {
const struct mv88e6xxx_ptp_ops *ptp_ops;
/* Phylink */
+ void (*phylink_get_interfaces)(struct mv88e6xxx_chip *chip, int port,
+ unsigned long *supported);
void (*phylink_validate)(struct mv88e6xxx_chip *chip, int port,
unsigned long *mask,
struct phylink_link_state *state);
--
cgit v1.2.3
From b020661fc4a29c39f0051cd22493e26cc1541b17 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 13 Mar 2020 10:48:32 +0000
Subject: net: mtk_eth_soc: use resolved link config for PCS PHY
The SGMII PCS PHY needs to be updated with the link configuration in
the mac_link_up() call rather than in mac_config(). However,
mtk_sgmii_setup_mode_force() programs the SGMII block during
mac_config() when using 802.3z interface modes with the link
configuration.
Split that functionality from mtk_sgmii_setup_mode_force(), moving it
to a new mtk_sgmii_link_up() function, and call it from mac_link_up().
This does not look correct to me: 802.3z modes operate at a fixed
speed. The contents of mtk_sgmii_link_up() look more appropriate for
SGMII mode, but the original code definitely did not call
mtk_sgmii_setup_mode_force() for SGMII mode but only 802.3z mode.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 ++++++++-
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 3 ++-
drivers/net/ethernet/mediatek/mtk_sgmii.c | 37 ++++++++++++++++++++---------
3 files changed, 38 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 64adfd24e134..82e4e9de3846 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -337,7 +337,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
/* Setup SGMIISYS with the determined property */
if (state->interface != PHY_INTERFACE_MODE_SGMII)
err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
- state);
+ state->interface);
else if (phylink_autoneg_inband(mode))
err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
@@ -434,6 +434,15 @@ static void mtk_mac_link_up(struct phylink_config *config,
phylink_config);
u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+ if (phy_interface_mode_is_8023z(interface)) {
+ struct mtk_eth *eth = mac->hw;
+
+ /* Decide how GMAC and SGMIISYS be mapped */
+ int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
+ 0 : mac->id;
+ mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex);
+ }
+
mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 |
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC |
MAC_MCR_FORCE_RX_FC);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 5ef70dd8b49c..c4771c29312a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -1004,7 +1004,8 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np,
u32 ana_rgc3);
int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id);
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
- const struct phylink_link_state *state);
+ phy_interface_t interface);
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex);
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id);
int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 32d83421226a..372c85c830b5 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -60,7 +60,7 @@ int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id)
}
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
- const struct phylink_link_state *state)
+ phy_interface_t interface)
{
unsigned int val;
@@ -69,7 +69,7 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
regmap_read(ss->regmap[id], ss->ana_rgc3, &val);
val &= ~RG_PHY_SPEED_MASK;
- if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
+ if (interface == PHY_INTERFACE_MODE_2500BASEX)
val |= RG_PHY_SPEED_3_125G;
regmap_write(ss->regmap[id], ss->ana_rgc3, val);
@@ -78,11 +78,33 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
val &= ~SGMII_AN_ENABLE;
regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+ if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_2500BASEX) {
+ /* SGMII force mode setting */
+ regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ val &= ~SGMII_IF_MODE_MASK;
+ val |= SGMII_SPEED_1000;
+ val |= SGMII_DUPLEX_FULL;
+ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+ }
+
+ /* Release PHYA power down state */
+ regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ val &= ~SGMII_PHYA_PWD;
+ regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+
+ return 0;
+}
+
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+{
+ unsigned int val;
+
/* SGMII force mode setting */
regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
val &= ~SGMII_IF_MODE_MASK;
- switch (state->speed) {
+ switch (speed) {
case SPEED_10:
val |= SGMII_SPEED_10;
break;
@@ -95,17 +117,10 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
break;
}
- if (state->duplex == DUPLEX_FULL)
+ if (duplex == DUPLEX_FULL)
val |= SGMII_DUPLEX_FULL;
regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
-
- /* Release PHYA power down state */
- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
- val &= ~SGMII_PHYA_PWD;
- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
-
- return 0;
}
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
--
cgit v1.2.3
From 8312e4eac6092eea69fba34906b972ec1c6927c9 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 21 Jun 2020 14:30:20 +0100
Subject: net: phy: at803x: simplify custom phy id matching
The at803x driver contains a function, at803x_match_phy_id(), which
tests whether the PHY ID matches the value passed, comparing phy_id
with phydev->phy_id and testing all bits that have a "one" in the
mask, phydev->drv->phy_id_mask.
This is the same test that is used to match the driver, with phy_id
replaced with the driver specified ID, phydev->drv->phy_id.
Hence, we already know the value of the bits being tested if we look
at phydev->drv->phy_id directly, and we do not require a complicated
test to check them. Test directly against phydev->drv->phy_id instead.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/at803x.c | 18 ++++++------------
1 file changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5d62b85a4024..bdac087058b2 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -532,12 +532,6 @@ static int at8031_register_regulators(struct phy_device *phydev)
return 0;
}
-static bool at803x_match_phy_id(struct phy_device *phydev, u32 phy_id)
-{
- return (phydev->phy_id & phydev->drv->phy_id_mask)
- == (phy_id & phydev->drv->phy_id_mask);
-}
-
static int at803x_parse_dt(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
@@ -602,8 +596,8 @@ static int at803x_parse_dt(struct phy_device *phydev)
* to the AR8030 so there might be a good chance it works on
* the AR8030 too.
*/
- if (at803x_match_phy_id(phydev, ATH8030_PHY_ID) ||
- at803x_match_phy_id(phydev, ATH8035_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8030_PHY_ID ||
+ phydev->drv->phy_id == ATH8035_PHY_ID) {
priv->clk_25m_reg &= AT8035_CLK_OUT_MASK;
priv->clk_25m_mask &= AT8035_CLK_OUT_MASK;
}
@@ -631,7 +625,7 @@ static int at803x_parse_dt(struct phy_device *phydev)
/* Only supported on AR8031/AR8033, the AR8030/AR8035 use strapping
* options.
*/
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
if (of_property_read_bool(node, "qca,keep-pll-enabled"))
priv->flags |= AT803X_KEEP_PLL_ENABLED;
@@ -676,7 +670,7 @@ static int at803x_probe(struct phy_device *phydev)
* Switch to the copper page, as otherwise we read
* the PHY capabilities from the fiber side.
*/
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
phy_lock_mdio_bus(phydev);
ret = at803x_write_page(phydev, AT803X_PAGE_COPPER);
phy_unlock_mdio_bus(phydev);
@@ -709,7 +703,7 @@ static int at803x_get_features(struct phy_device *phydev)
if (err)
return err;
- if (!at803x_match_phy_id(phydev, ATH8031_PHY_ID))
+ if (phydev->drv->phy_id != ATH8031_PHY_ID)
return 0;
/* AR8031/AR8033 have different status registers
@@ -820,7 +814,7 @@ static int at803x_config_init(struct phy_device *phydev)
if (ret < 0)
return ret;
- if (at803x_match_phy_id(phydev, ATH8031_PHY_ID)) {
+ if (phydev->drv->phy_id == ATH8031_PHY_ID) {
ret = at8031_pll_config(phydev);
if (ret < 0)
return ret;
--
cgit v1.2.3
From 62e364e44a89c28faf0bb8a5500d830b43cec9ae Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 29 Nov 2019 00:31:03 +0000
Subject: net: phy: add helpers for comparing phy IDs
There are several places which open code comparing PHY IDs. Provide a
couple of helpers to assist with this, using a slightly simpler test
than the original:
- phy_id_compare() compares two arbitary PHY IDs and a mask of the
significant bits in the ID.
- phydev_id_compare() compares the bound phydev with the specified
PHY ID, using the bound driver's mask.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phy_device.c | 16 +++++++---------
drivers/net/phy/phylink.c | 4 ++--
include/linux/phy.h | 28 ++++++++++++++++++++++++++++
3 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 5d5f9a9ee768..67593cf47bf0 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -388,8 +388,7 @@ int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
fixup = list_entry(pos, struct phy_fixup, list);
if ((!strcmp(fixup->bus_id, bus_id)) &&
- ((fixup->phy_uid & phy_uid_mask) ==
- (phy_uid & phy_uid_mask))) {
+ phy_id_compare(fixup->phy_uid, phy_uid, phy_uid_mask)) {
list_del(&fixup->list);
kfree(fixup);
ret = 0;
@@ -425,8 +424,8 @@ static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
return 0;
- if ((fixup->phy_uid & fixup->phy_uid_mask) !=
- (phydev->phy_id & fixup->phy_uid_mask))
+ if (!phy_id_compare(phydev->phy_id, fixup->phy_uid,
+ fixup->phy_uid_mask))
if (fixup->phy_uid != PHY_ANY_UID)
return 0;
@@ -473,15 +472,14 @@ static int phy_bus_match(struct device *dev, struct device_driver *drv)
if (phydev->c45_ids.device_ids[i] == 0xffffffff)
continue;
- if ((phydrv->phy_id & phydrv->phy_id_mask) ==
- (phydev->c45_ids.device_ids[i] &
- phydrv->phy_id_mask))
+ if (phy_id_compare(phydev->c45_ids.device_ids[i],
+ phydrv->phy_id, phydrv->phy_id_mask))
return 1;
}
return 0;
} else {
- return (phydrv->phy_id & phydrv->phy_id_mask) ==
- (phydev->phy_id & phydrv->phy_id_mask);
+ return phy_id_compare(phydev->phy_id, phydrv->phy_id,
+ phydrv->phy_id_mask);
}
}
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index c721ef6dda2e..1454e8d199de 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2350,8 +2350,8 @@ static void phylink_sfp_link_up(void *upstream)
*/
static bool phylink_phy_no_inband(struct phy_device *phy)
{
- return phy->is_c45 &&
- (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
+ return phy->is_c45 && phy_id_compare(phy->c45_ids.device_ids[1],
+ 0xae025150, 0xfffffff0);
}
static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 1472657a8136..a9d22716b16b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -928,6 +928,34 @@ struct phy_driver {
#define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4)
#define PHY_ID_MATCH_VENDOR(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 10)
+/**
+ * phy_id_compare - compare @id1 with @id2 taking account of @mask
+ * @id1: first PHY ID
+ * @id2: second PHY ID
+ * @mask: the PHY ID mask, set bits are significant in matching
+ *
+ * Return true if the bits from @id1 and @id2 specified by @mask match.
+ * This uses an equivalent test to (@id & @mask) == (@phy_id & @mask).
+ */
+static inline bool phy_id_compare(u32 id1, u32 id2, u32 mask)
+{
+ return !((id1 ^ id2) & mask);
+}
+
+/**
+ * phydev_id_compare - compare @id with the PHY's Clause 22 ID
+ * @phydev: the PHY device
+ * @id: the PHY ID to be matched
+ *
+ * Compare the @phydev clause 22 ID with the provided @id and return true or
+ * false depending whether it matches, using the bound driver mask. The
+ * @phydev must be bound to a driver.
+ */
+static inline bool phydev_id_compare(struct phy_device *phydev, u32 id)
+{
+ return phy_id_compare(id, phydev->phy_id, phydev->drv->phy_id_mask);
+}
+
/* A Structure for boards to register fixups with the PHY Lib */
struct phy_fixup {
struct list_head list;
--
cgit v1.2.3
From 85cb27e836df0c37ca6e5fab7b20ab1106478956 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 17 Dec 2019 15:21:50 +0000
Subject: dt-bindings: net: add dt bindings for marvell10g driver
Add a DT bindings document for the Marvell 10G driver, which will
augment the generic ethernet PHY binding by having LED mode
configuration.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
.../devicetree/bindings/net/marvell,10g.yaml | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/marvell,10g.yaml
diff --git a/Documentation/devicetree/bindings/net/marvell,10g.yaml b/Documentation/devicetree/bindings/net/marvell,10g.yaml
new file mode 100644
index 000000000000..93d2c8d7e759
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell,10g.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/marvell,10g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Alaska X family Ethernet PHYs
+
+maintainers:
+ - Russell King <rmk+kernel@armlinux.org.uk>
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+properties:
+ marvell,led-mode:
+ description: |
+ An array of one to four 16-bit integers to write to the PHY LED
+ configuration registers.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint16-array
+ - minItems: 1
+ maxItems: 4
+
+examples:
+ - |
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethernet-phy@0 {
+ reg = <0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>;
+ };
+ };
--
cgit v1.2.3
From 9b8ec077ca9d8bbb83c7e4c19f631596433f3cdf Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 1 Dec 2019 15:33:39 +0000
Subject: net: phy: marvell10g: add support for configuring LEDs
Add support for configuring the LEDs. Macchiatobin has an oddity in
that the left LED goes out when the cable is connected, and flashes
when there's link activity. This is because the reset default for
the LED outputs assume that the LED is connected to supply, not to
ground. Add support for configuring the LED modes and polarities.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell10g.c | 62 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 55 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index eff980b94c95..9eece4f5fb4a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -27,6 +27,7 @@
#include <linux/delay.h>
#include <linux/hwmon.h>
#include <linux/marvell_phy.h>
+#include <linux/of.h>
#include <linux/phy.h>
#include <linux/sfp.h>
@@ -146,6 +147,8 @@ struct mv3310_priv {
struct device *hwmon_dev;
char *hwmon_name;
+ u8 num_leds;
+ u16 led_mode[4];
};
static const struct mv3310_chip *to_mv3310_chip(struct phy_device *phydev)
@@ -468,6 +471,43 @@ static const struct sfp_upstream_ops mv3310_sfp_ops = {
.module_insert = mv3310_sfp_insert,
};
+static int mv3310_leds_write(struct phy_device *phydev)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ int i, ret;
+
+ for (i = 0; i < priv->num_leds; i++) {
+ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, 0xf020 + i,
+ priv->led_mode[i]);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mv3310_fw_config(struct phy_device *phydev)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+ struct device_node *node;
+ int ret;
+
+ node = phydev->mdio.dev.of_node;
+ if (!node)
+ return 0;
+
+ ret = of_property_read_variable_u16_array(node, "marvell,led-mode",
+ priv->led_mode, 1, ARRAY_SIZE(priv->led_mode));
+ if (ret == -EINVAL)
+ ret = 0;
+ if (ret < 0)
+ return ret;
+
+ priv->num_leds = ret;
+
+ return 0;
+}
+
static int mv3310_probe(struct phy_device *phydev)
{
const struct mv3310_chip *chip = to_mv3310_chip(phydev);
@@ -479,6 +519,20 @@ static int mv3310_probe(struct phy_device *phydev)
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
return -ENODEV;
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ dev_set_drvdata(&phydev->mdio.dev, priv);
+
+ ret = mv3310_fw_config(phydev);
+ if (ret < 0)
+ return ret;
+
+ ret = mv3310_leds_write(phydev);
+ if (ret < 0)
+ return ret;
+
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_BOOT);
if (ret < 0)
return ret;
@@ -489,12 +543,6 @@ static int mv3310_probe(struct phy_device *phydev)
return -ENODEV;
}
- priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- dev_set_drvdata(&phydev->mdio.dev, priv);
-
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
if (ret < 0)
return ret;
@@ -691,7 +739,7 @@ static int mv3310_config_init(struct phy_device *phydev)
if (err && err != -EOPNOTSUPP)
return err;
- return 0;
+ return mv3310_leds_write(phydev);
}
static int mv3310_get_features(struct phy_device *phydev)
--
cgit v1.2.3
From 6e562bcf785d136cf57cdb996c591a058ca58fd9 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 1 Dec 2019 15:35:08 +0000
Subject: arm64: dts: configure Macchiatobin 10G PHY LED modes
Configure the Macchiatobin 10G PHY LED modes to correct their polarity.
We keep the existing LED behaviours, but switch their polarity to
reflect how they are connected. Tweak the LED modes as well to be:
left: off = no link
solid green = RJ45 link up (not SFP+ cage)
flash green = traffic
right: off = no link
solid green = 10G
solid yellow = 1G
flash green = 100M
flash yellow = 10M
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 1766cf58101b..68c27f22ff57 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -21,12 +21,14 @@
compatible = "ethernet-phy-ieee802.3-c45";
reg = <0>;
sfp = <&sfp_eth0>;
+ marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>;
};
phy8: ethernet-phy@8 {
compatible = "ethernet-phy-ieee802.3-c45";
reg = <8>;
sfp = <&sfp_eth1>;
+ marvell,led-mode = /bits/ 16 <0x0129 0x095d 0x0855>;
};
};
--
cgit v1.2.3
From d9598632d7bbea77eeaa2854f2410e332b1a2845 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 3 Jan 2020 23:13:28 +0000
Subject: net: phy: add resolved pause support
Allow phylib drivers to pass the hardware-resolved pause state to MAC
drivers, rather than using the software-based pause resolution code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phy_device.c | 6 ++++++
include/linux/phy.h | 9 +++++++++
2 files changed, 15 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 67593cf47bf0..7317539a78da 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2785,6 +2785,12 @@ void phy_get_pause(struct phy_device *phydev, bool *tx_pause, bool *rx_pause)
return;
}
+ if (phydev->resolved_pause_valid) {
+ *tx_pause = phydev->resolved_tx_pause;
+ *rx_pause = phydev->resolved_rx_pause;
+ return;
+ }
+
return linkmode_resolve_pause(phydev->advertising,
phydev->lp_advertising,
tx_pause, rx_pause);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index a9d22716b16b..8e5306ce68a1 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -630,6 +630,15 @@ struct phy_device {
u8 master_slave_set;
u8 master_slave_state;
+ /*
+ * private to phylib: the resolved pause state - only valid if
+ * resolved_pause_valid is true. only phy drivers and phylib
+ * should touch this.
+ */
+ bool resolved_pause_valid;
+ bool resolved_tx_pause;
+ bool resolved_rx_pause;
+
/* Union of PHY and Attached devices' supported link modes */
/* See ethtool.h for more info */
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
--
cgit v1.2.3
From f1526441e47d215ab14b594efd60a7f547b93a79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sat, 4 Jan 2020 00:41:35 +0000
Subject: net: phy: marvell*: add support for hw resolved pause modes
Support reporting the hardware resolved pause enablement states via
phylib, overriding our software implementation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell.c | 45 ++++++++++++++++++++++++++++++++++++++------
drivers/net/phy/marvell10g.c | 6 ++++++
2 files changed, 45 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3de93c9f2744..4509b5b3ff91 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -169,6 +169,10 @@
#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_STATUS_LINK 0x0400
+#define MII_M1111_PHY_STATUS_TX_PAUSE 0x0008
+#define MII_M1111_PHY_STATUS_RX_PAUSE 0x0004
+#define MII_88E151X_PHY_STATUS_TX_PAUSE 0x0200
+#define MII_88E151X_PHY_STATUS_RX_PAUSE 0x0100
#define MII_88E3016_PHY_SPEC_CTRL 0x10
#define MII_88E3016_DISABLE_SCRAMBLER 0x0200
@@ -294,6 +298,8 @@ struct marvell_priv {
u32 last;
u32 step;
s8 pair;
+ u16 tx_pause_mask;
+ u16 rx_pause_mask;
};
static int marvell_read_page(struct phy_device *phydev)
@@ -1509,6 +1515,7 @@ static void fiber_lpa_mod_linkmode_lpa_t(unsigned long *advertising, u32 lpa)
static int marvell_read_status_page_an(struct phy_device *phydev,
int fiber, int status)
{
+ struct marvell_priv *priv = phydev->priv;
int lpa;
int err;
@@ -1564,6 +1571,11 @@ static int marvell_read_status_page_an(struct phy_device *phydev,
}
}
+ phydev->resolved_tx_pause = !!(status & priv->tx_pause_mask);
+ phydev->resolved_rx_pause = !!(status & priv->rx_pause_mask);
+ phydev->resolved_pause_valid = !fiber && priv->tx_pause_mask &&
+ priv->rx_pause_mask;
+
return 0;
}
@@ -1607,6 +1619,7 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->port = fiber ? PORT_FIBRE : PORT_TP;
+ phydev->resolved_pause_valid = false;
if (phydev->autoneg == AUTONEG_ENABLE)
err = marvell_read_status_page_an(phydev, fiber, status);
@@ -2688,7 +2701,8 @@ static int marvell_hwmon_probe(struct phy_device *phydev)
}
#endif
-static int marvell_probe(struct phy_device *phydev)
+static int marvell_probe_pause(struct phy_device *phydev, u16 tx_pause_mask,
+ u16 rx_pause_mask)
{
struct marvell_priv *priv;
@@ -2696,11 +2710,30 @@ static int marvell_probe(struct phy_device *phydev)
if (!priv)
return -ENOMEM;
+ priv->tx_pause_mask = tx_pause_mask;
+ priv->rx_pause_mask = rx_pause_mask;
phydev->priv = priv;
return marvell_hwmon_probe(phydev);
}
+static int marvell_probe(struct phy_device *phydev)
+{
+ return marvell_probe_pause(phydev, 0, 0);
+}
+
+static int m88e1111_probe(struct phy_device *phydev)
+{
+ return marvell_probe_pause(phydev, MII_M1111_PHY_STATUS_TX_PAUSE,
+ MII_M1111_PHY_STATUS_RX_PAUSE);
+}
+
+static int m88e1510_probe(struct phy_device *phydev)
+{
+ return marvell_probe_pause(phydev, MII_88E151X_PHY_STATUS_TX_PAUSE,
+ MII_88E151X_PHY_STATUS_RX_PAUSE);
+}
+
static struct phy_driver marvell_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88E1101,
@@ -2745,7 +2778,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
/* PHY_GBIT_FEATURES */
- .probe = marvell_probe,
+ .probe = m88e1111_probe,
.config_init = m88e1111gbe_config_init,
.config_aneg = m88e1111_config_aneg,
.read_status = marvell_read_status,
@@ -2927,7 +2960,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
.features = PHY_GBIT_FIBRE_FEATURES,
.flags = PHY_POLL_CABLE_TEST,
- .probe = marvell_probe,
+ .probe = m88e1510_probe,
.config_init = m88e1510_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -2956,7 +2989,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
- .probe = marvell_probe,
+ .probe = m88e1510_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e1510_config_aneg,
.read_status = marvell_read_status,
@@ -2980,7 +3013,7 @@ static struct phy_driver marvell_drivers[] = {
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1545",
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
- .probe = marvell_probe,
+ .probe = m88e1510_probe,
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
.config_init = marvell_1011gbe_config_init,
@@ -3027,7 +3060,7 @@ static struct phy_driver marvell_drivers[] = {
.driver_data = DEF_MARVELL_HWMON_OPS(m88e1510_hwmon_ops),
/* PHY_GBIT_FEATURES */
.flags = PHY_POLL_CABLE_TEST,
- .probe = marvell_probe,
+ .probe = m88e1510_probe,
.config_init = marvell_1011gbe_config_init,
.config_aneg = m88e6390_config_aneg,
.read_status = marvell_read_status,
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 9eece4f5fb4a..6fd63044daf5 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -82,6 +82,8 @@ enum {
MV_PCS_CSSR1_SPD1_10 = 0x0000,
MV_PCS_CSSR1_DUPLEX_FULL= BIT(13),
MV_PCS_CSSR1_RESOLVED = BIT(11),
+ MV_PCS_CSSR1_TX_PAUSE = BIT(9),
+ MV_PCS_CSSR1_RX_PAUSE = BIT(8),
MV_PCS_CSSR1_MDIX = BIT(6),
MV_PCS_CSSR1_SPD2_MASK = 0x000c,
MV_PCS_CSSR1_SPD2_5000 = 0x0008,
@@ -957,6 +959,10 @@ static int mv3310_read_status_copper(struct phy_device *phydev)
phydev->mdix = cssr1 & MV_PCS_CSSR1_MDIX ?
ETH_TP_MDI_X : ETH_TP_MDI;
+ phydev->resolved_tx_pause = !!(cssr1 & MV_PCS_CSSR1_TX_PAUSE);
+ phydev->resolved_rx_pause = !!(cssr1 & MV_PCS_CSSR1_RX_PAUSE);
+ phydev->resolved_pause_valid = true;
+
if (val & MDIO_AN_STAT1_COMPLETE) {
val = genphy_c45_read_lpa(phydev);
if (val < 0)
--
cgit v1.2.3
From b6fcbbc99c55ca450563af6d24826d1aaca0fddf Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 26 Aug 2019 12:19:35 +0100
Subject: net: phy: provide phy driver start/stop hooks
Provide phy driver start/stop hooks so that the PHY driver knows when
the network driver is starting or stopping. This will be used for the
Marvell 10G driver so that we can sanely refuse to start if the PHYs
firmware is not present, and also so that we can sanely support SFPs
behind the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phy.c | 5 +++++
include/linux/phy.h | 3 +++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8eeb26d8aeb7..abf58a152fc3 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1024,6 +1024,8 @@ void phy_stop(struct phy_device *phydev)
sfp_upstream_stop(phydev->sfp_bus);
phydev->state = PHY_HALTED;
+ if (phydev->drv->stop)
+ phydev->drv->stop(phydev);
mutex_unlock(&phydev->lock);
@@ -1057,6 +1059,9 @@ void phy_start(struct phy_device *phydev)
goto out;
}
+ if (phydev->drv->start && phydev->drv->start(phydev))
+ goto out;
+
if (phydev->sfp_bus)
sfp_upstream_start(phydev->sfp_bus);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8e5306ce68a1..92e174a35fde 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -788,6 +788,9 @@ struct phy_driver {
/** @resume: Resume the hardware, restoring state if needed */
int (*resume)(struct phy_device *phydev);
+ int (*start)(struct phy_device *phydev);
+ void (*stop)(struct phy_device *phydev);
+
/**
* @config_aneg: Configures the advertisement and resets
* autonegotiation if phydev->autoneg is on,
--
cgit v1.2.3
From f896f17eb7d719e4420d0f9f79a9c091b04e7b46 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 5 Jun 2019 11:44:55 +0100
Subject: net: phy: marvell10g: allow PHY to probe without firmware
Allow the PHY to probe when there is no firmware, but do not allow the
link to come up by forcing the PHY state to PHY_HALTED in a similar way
to phy_error().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell10g.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 6fd63044daf5..57ba639c7a2f 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -146,6 +146,7 @@ struct mv3310_priv {
bool has_downshift;
bool rate_match;
phy_interface_t const_interface;
+ bool firmware_failed;
struct device *hwmon_dev;
char *hwmon_name;
@@ -542,7 +543,7 @@ static int mv3310_probe(struct phy_device *phydev)
if (ret & MV_PMA_BOOT_FATAL) {
dev_warn(&phydev->mdio.dev,
"PHY failed to boot firmware, status=%04x\n", ret);
- return -ENODEV;
+ priv->firmware_failed = true;
}
ret = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MV_PMA_FW_VER0);
@@ -599,6 +600,19 @@ static int mv3310_resume(struct phy_device *phydev)
return mv3310_hwmon_config(phydev, true);
}
+static int mv3310_start(struct phy_device *phydev)
+{
+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
+
+ if (priv->firmware_failed) {
+ dev_warn(&phydev->mdio.dev,
+ "PHY firmware failure: PHY not starting");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* Some PHYs in the Alaska family such as the 88X3310 and the 88E2010
* don't set bit 14 in PMA Extended Abilities (1.11), although they do
* support 2.5GBASET and 5GBASET. For these models, we can still read their
@@ -1205,6 +1219,7 @@ static struct phy_driver mv3310_drivers[] = {
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
+ .start = mv3310_start,
.config_aneg = mv3310_config_aneg,
.aneg_done = mv3310_aneg_done,
.read_status = mv3310_read_status,
@@ -1240,6 +1255,7 @@ static struct phy_driver mv3310_drivers[] = {
.probe = mv3310_probe,
.suspend = mv3310_suspend,
.resume = mv3310_resume,
+ .start = mv3310_start,
.config_init = mv3310_config_init,
.config_aneg = mv3310_config_aneg,
.aneg_done = mv3310_aneg_done,
--
cgit v1.2.3
From a8ba15f31356f0044f264d677d7f2a56b8599f8e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 5 Nov 2019 10:34:39 +0000
Subject: net: phy: make phy_error() report which PHY has failed
phy_error() is called from phy_interrupt() or phy_state_machine(), and
uses WARN_ON() to print a backtrace. The backtrace is not useful when
reporting a PHY error.
However, a system may contain multiple ethernet PHYs, and phy_error()
gives no clue which one caused the problem.
Replace WARN_ON() with a call to phydev_err() so that we can see which
PHY had an error, and also inform the user that we are halting the PHY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index abf58a152fc3..db42a330f099 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -912,7 +912,7 @@ void phy_stop_machine(struct phy_device *phydev)
*/
void phy_error(struct phy_device *phydev)
{
- WARN_ON(1);
+ phydev_err(phydev, "Error detected, halting PHY\n");
mutex_lock(&phydev->lock);
phydev->state = PHY_HALTED;
--
cgit v1.2.3
From 135897c1f6ce9b35bb564036f6741313976ddd8f Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 18 Oct 2019 10:37:44 +0100
Subject: net: sfp: add support for cooled SFP+ transceivers
Cooled SFP+ transceivers need a longer initialisation (startup) time.
Select the initialisation time depending on the cooled option bit.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp.c | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 34e90216bd2c..21aefefd19a1 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -168,6 +168,7 @@ static const enum gpiod_flags gpio_flags[] = {
#define T_WAIT msecs_to_jiffies(50)
#define T_START_UP msecs_to_jiffies(300)
#define T_START_UP_BAD_GPON msecs_to_jiffies(60000)
+#define T_START_UP_COOLED msecs_to_jiffies(90000)
/* t_reset is the time required to assert the TX_DISABLE signal to reset
* an indicated TX_FAULT.
@@ -1925,6 +1926,8 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) &&
!memcmp(id.base.vendor_pn, "3FE46541AA ", 16))
sfp->module_t_start_up = T_START_UP_BAD_GPON;
+ else if (id.ext.options & cpu_to_be16(SFP_OPTIONS_COOLED_XCVR))
+ sfp->module_t_start_up = T_START_UP_COOLED;
else
sfp->module_t_start_up = T_START_UP;
@@ -2131,10 +2134,10 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
break;
if (sfp->state & SFP_F_TX_FAULT) {
- /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431)
- * from the TX_DISABLE deassertion for the module to
- * initialise, which is indicated by TX_FAULT
- * deasserting.
+ /* Wait up to t_init (SFF-8472), t_start_up (SFF-8431),
+ * or t_start_up_cooled (SFF-8431) from the TX_DISABLE
+ * deassertion for the module to initialise, which is
+ * indicated by TX_FAULT deasserting.
*/
timeout = sfp->module_t_start_up;
if (timeout > T_WAIT)
@@ -2153,8 +2156,8 @@ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
case SFP_S_INIT:
if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
- /* TX_FAULT is still asserted after t_init
- * or t_start_up, so assume there is a fault.
+ /* TX_FAULT is still asserted after t_init, t_start_up
+ * or t_start_up_cooled, so assume there is a fault.
*/
sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
sfp->sm_fault_retries == N_FAULT_INIT);
--
cgit v1.2.3
From 1fa01bc40869fae288b98ed21ec4cf25e9d70e87 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 14 Apr 2017 20:17:13 +0100
Subject: net: sfp: add sfp+ compatible [*not for mainline*]
Add a compatible for SFP+ cages. SFP+ cages are backwards compatible,
but the ethernet device behind them may not support the slower speeds
of SFP modules.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/sfp.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 21aefefd19a1..f2484197cbbd 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -304,6 +304,7 @@ static const struct sff_data sfp_data = {
static const struct of_device_id sfp_of_match[] = {
{ .compatible = "sff,sff", .data = &sff_data, },
{ .compatible = "sff,sfp", .data = &sfp_data, },
+ { .compatible = "sff,sfp+", .data = &sfp_data, },
{ },
};
MODULE_DEVICE_TABLE(of, sfp_of_match);
--
cgit v1.2.3
From 74505eaba6278e9e554e9d7fd42e7bd720477b35 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 13 Sep 2015 01:06:31 +0100
Subject: net: sfp: display SFP module information [*not for mainline*]
Display SFP module information verbosely, splitting the generic parts
into a separate file.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/sff.c | 114 ++++++++++++++++++++++++
drivers/net/phy/sff.h | 16 ++++
drivers/net/phy/sfp.c | 228 ++++++++++++++++++++++++++++++++++++++++++++---
4 files changed, 349 insertions(+), 11 deletions(-)
create mode 100644 drivers/net/phy/sff.c
create mode 100644 drivers/net/phy/sff.h
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 172bb193ae6a..93428ab6d5f3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -26,7 +26,7 @@ obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o
-obj-$(CONFIG_SFP) += sfp.o
+obj-$(CONFIG_SFP) += sff.o sfp.o
sfp-obj-$(CONFIG_SFP) += sfp-bus.o
obj-y += $(sfp-obj-y) $(sfp-obj-m)
diff --git a/drivers/net/phy/sff.c b/drivers/net/phy/sff.c
new file mode 100644
index 000000000000..a2eb56118dd4
--- /dev/null
+++ b/drivers/net/phy/sff.c
@@ -0,0 +1,114 @@
+#include <linux/kernel.h>
+#include <linux/sfp.h>
+#include "sff.h"
+
+const char *sff_link_len(char *buf, size_t size, unsigned int length,
+ unsigned int multiplier)
+{
+ if (length == 0)
+ return "unsupported/unspecified";
+
+ if (length == 255) {
+ *buf++ = '>';
+ size -= 1;
+ length -= 1;
+ }
+
+ length *= multiplier;
+
+ if (length >= 1000)
+ snprintf(buf, size, "%u.%0*ukm",
+ length / 1000,
+ multiplier > 100 ? 1 :
+ multiplier > 10 ? 2 : 3,
+ length % 1000);
+ else
+ snprintf(buf, size, "%um", length);
+
+ return buf;
+}
+EXPORT_SYMBOL_GPL(sff_link_len);
+
+const char *sff_bitfield(char *buf, size_t size,
+ const struct sff_bitfield *bits, unsigned int val)
+{
+ char *p = buf;
+ int n;
+
+ *p = '\0';
+ while (bits->mask) {
+ if ((val & bits->mask) == bits->val) {
+ n = snprintf(p, size, "%s%s",
+ buf != p ? ", " : "",
+ bits->str);
+ if (n == size)
+ break;
+ p += n;
+ size -= n;
+ }
+ bits++;
+ }
+
+ return buf;
+}
+EXPORT_SYMBOL_GPL(sff_bitfield);
+
+const char *sff_connector(unsigned int connector)
+{
+ switch (connector) {
+ case SFF8024_CONNECTOR_UNSPEC:
+ return "unknown/unspecified";
+ case SFF8024_CONNECTOR_SC:
+ return "SC";
+ case SFF8024_CONNECTOR_FIBERJACK:
+ return "Fiberjack";
+ case SFF8024_CONNECTOR_LC:
+ return "LC";
+ case SFF8024_CONNECTOR_MT_RJ:
+ return "MT-RJ";
+ case SFF8024_CONNECTOR_MU:
+ return "MU";
+ case SFF8024_CONNECTOR_SG:
+ return "SG";
+ case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
+ return "Optical pigtail";
+ case SFF8024_CONNECTOR_MPO_1X12:
+ return "MPO 1X12";
+ case SFF8024_CONNECTOR_MPO_2X16:
+ return "MPO 2X16";
+ case SFF8024_CONNECTOR_HSSDC_II:
+ return "HSSDC II";
+ case SFF8024_CONNECTOR_COPPER_PIGTAIL:
+ return "Copper pigtail";
+ case SFF8024_CONNECTOR_RJ45:
+ return "RJ45";
+ case SFF8024_CONNECTOR_MXC_2X16:
+ return "MXC 2X16";
+ default:
+ return "unknown";
+ }
+}
+EXPORT_SYMBOL_GPL(sff_connector);
+
+const char *sff_encoding(unsigned int encoding)
+{
+ switch (encoding) {
+ case SFF8024_ENCODING_UNSPEC:
+ return "unspecified";
+ case SFF8024_ENCODING_8472_64B66B:
+ return "64b66b";
+ case SFF8024_ENCODING_8B10B:
+ return "8b10b";
+ case SFF8024_ENCODING_4B5B:
+ return "4b5b";
+ case SFF8024_ENCODING_NRZ:
+ return "NRZ";
+ case SFF8024_ENCODING_8472_MANCHESTER:
+ return "MANCHESTER";
+ default:
+ return "unknown";
+ }
+}
+EXPORT_SYMBOL_GPL(sff_encoding);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/sff.h b/drivers/net/phy/sff.h
new file mode 100644
index 000000000000..cd7bb7c7ae4a
--- /dev/null
+++ b/drivers/net/phy/sff.h
@@ -0,0 +1,16 @@
+#ifndef SFF_H
+#define SFF_H
+
+struct sff_bitfield {
+ unsigned int mask;
+ unsigned int val;
+ const char *str;
+};
+
+const char *sff_link_len(char *buf, size_t size, unsigned int length,
+ unsigned int multiplier);
+const char *sff_bitfield(char *buf, size_t size,
+ const struct sff_bitfield *bits, unsigned int val);
+const char *sff_connector(unsigned int connector);
+const char *sff_encoding(unsigned int encoding);
+#endif
diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index f2484197cbbd..4637e3769ab2 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/workqueue.h>
+#include "sff.h"
#include "sfp.h"
#include "swphy.h"
@@ -1398,6 +1399,114 @@ static void sfp_hwmon_exit(struct sfp *sfp)
}
#endif
+static const struct sff_bitfield sfp_options[] = {
+ {
+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL,
+ .str = "hpl",
+ }, {
+ .mask = SFP_OPTIONS_PAGING_A2,
+ .val = SFP_OPTIONS_PAGING_A2,
+ .str = "paginga2",
+ }, {
+ .mask = SFP_OPTIONS_RETIMER,
+ .val = SFP_OPTIONS_RETIMER,
+ .str = "retimer",
+ }, {
+ .mask = SFP_OPTIONS_COOLED_XCVR,
+ .val = SFP_OPTIONS_COOLED_XCVR,
+ .str = "cooled",
+ }, {
+ .mask = SFP_OPTIONS_POWER_DECL,
+ .val = SFP_OPTIONS_POWER_DECL,
+ .str = "powerdecl",
+ }, {
+ .mask = SFP_OPTIONS_RX_LINEAR_OUT,
+ .val = SFP_OPTIONS_RX_LINEAR_OUT,
+ .str = "rxlinear",
+ }, {
+ .mask = SFP_OPTIONS_RX_DECISION_THRESH,
+ .val = SFP_OPTIONS_RX_DECISION_THRESH,
+ .str = "rxthresh",
+ }, {
+ .mask = SFP_OPTIONS_TUNABLE_TX,
+ .val = SFP_OPTIONS_TUNABLE_TX,
+ .str = "tunabletx",
+ }, {
+ .mask = SFP_OPTIONS_RATE_SELECT,
+ .val = SFP_OPTIONS_RATE_SELECT,
+ .str = "ratesel",
+ }, {
+ .mask = SFP_OPTIONS_TX_DISABLE,
+ .val = SFP_OPTIONS_TX_DISABLE,
+ .str = "txdisable",
+ }, {
+ .mask = SFP_OPTIONS_TX_FAULT,
+ .val = SFP_OPTIONS_TX_FAULT,
+ .str = "txfault",
+ }, {
+ .mask = SFP_OPTIONS_LOS_INVERTED,
+ .val = SFP_OPTIONS_LOS_INVERTED,
+ .str = "los-",
+ }, {
+ .mask = SFP_OPTIONS_LOS_NORMAL,
+ .val = SFP_OPTIONS_LOS_NORMAL,
+ .str = "los+",
+ }, { }
+};
+
+static const struct sff_bitfield diagmon[] = {
+ {
+ .mask = SFP_DIAGMON_DDM,
+ .val = SFP_DIAGMON_DDM,
+ .str = "ddm",
+ }, {
+ .mask = SFP_DIAGMON_INT_CAL,
+ .val = SFP_DIAGMON_INT_CAL,
+ .str = "intcal",
+ }, {
+ .mask = SFP_DIAGMON_EXT_CAL,
+ .val = SFP_DIAGMON_EXT_CAL,
+ .str = "extcal",
+ }, {
+ .mask = SFP_DIAGMON_RXPWR_AVG,
+ .val = SFP_DIAGMON_RXPWR_AVG,
+ .str = "rxpwravg",
+ }, { }
+};
+
+static const struct sff_bitfield sfp_enhopts[] = {
+ {
+ .mask = SFP_ENHOPTS_ALARMWARN,
+ .val = SFP_ENHOPTS_ALARMWARN,
+ .str = "alarmwarn",
+ }, {
+ .mask = SFP_ENHOPTS_SOFT_TX_DISABLE,
+ .val = SFP_ENHOPTS_SOFT_TX_DISABLE,
+ .str = "soft_tx_dis",
+ }, {
+ .mask = SFP_ENHOPTS_SOFT_TX_FAULT,
+ .val = SFP_ENHOPTS_SOFT_TX_FAULT,
+ .str = "soft_tx_fault",
+ }, {
+ .mask = SFP_ENHOPTS_SOFT_RX_LOS,
+ .val = SFP_ENHOPTS_SOFT_RX_LOS,
+ .str = "soft_rx_los",
+ }, {
+ .mask = SFP_ENHOPTS_SOFT_RATE_SELECT,
+ .val = SFP_ENHOPTS_SOFT_RATE_SELECT,
+ .str = "soft_rs",
+ }, {
+ .mask = SFP_ENHOPTS_APP_SELECT_SFF8079,
+ .val = SFP_ENHOPTS_APP_SELECT_SFF8079,
+ .str = "app_sel",
+ }, {
+ .mask = SFP_ENHOPTS_SOFT_RATE_SFF8431,
+ .val = SFP_ENHOPTS_SOFT_RATE_SFF8431,
+ .str = "soft_r8431",
+ }, { }
+};
+
/* Helpers */
static void sfp_module_tx_disable(struct sfp *sfp)
{
@@ -1781,6 +1890,110 @@ static int sfp_cotsworks_fixup_check(struct sfp *sfp, struct sfp_eeprom_id *id)
return 0;
}
+static void sfp_print_module_info(struct sfp *sfp, const struct sfp_eeprom_id *id, bool cotsworks)
+{
+ unsigned int br_nom, br_min, br_max;
+ char date[9];
+ char options[80];
+
+ /* Cotsworks also gets the date code wrong. */
+ date[0] = id->ext.datecode[4 - 2 * cotsworks];
+ date[1] = id->ext.datecode[5 - 2 * cotsworks];
+ date[2] = '-';
+ date[3] = id->ext.datecode[2 + 2 * cotsworks];
+ date[4] = id->ext.datecode[3 + 2 * cotsworks];
+ date[5] = '-';
+ date[6] = id->ext.datecode[0];
+ date[7] = id->ext.datecode[1];
+ date[8] = '\0';
+
+ if (id->base.br_nominal == 0) {
+ br_min = br_nom = br_max = 0;
+ } else if (id->base.br_nominal == 255) {
+ br_nom = 250 * id->ext.br_max;
+ br_max = br_nom + br_nom * id->ext.br_min / 100;
+ br_min = br_nom - br_nom * id->ext.br_min / 100;
+ } else {
+ br_nom = id->base.br_nominal * 100;
+ br_min = br_nom - id->base.br_nominal * id->ext.br_min;
+ br_max = br_nom + id->base.br_nominal * id->ext.br_max;
+ }
+
+ dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %s\n",
+ (int)sizeof(id->base.vendor_name), id->base.vendor_name,
+ (int)sizeof(id->base.vendor_pn), id->base.vendor_pn,
+ (int)sizeof(id->base.vendor_rev), id->base.vendor_rev,
+ (int)sizeof(id->ext.vendor_sn), id->ext.vendor_sn, date);
+ dev_info(sfp->dev, " %s connector, encoding %s, bitrate %u.%03u (%u.%03u-%u.%03u) Gbps\n",
+ sff_connector(id->base.connector),
+ sff_encoding(id->base.encoding),
+ br_nom / 1000, br_nom % 1000,
+ br_min / 1000, br_min % 1000, br_max / 1000, br_max % 1000);
+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseLX%c 100BaseFX%c BaseBX10%c BasePX%c\n",
+ id->base.e1000_base_sx ? '+' : '-',
+ id->base.e1000_base_lx ? '+' : '-',
+ id->base.e1000_base_cx ? '+' : '-',
+ id->base.e1000_base_t ? '+' : '-',
+ id->base.e100_base_lx ? '+' : '-',
+ id->base.e100_base_fx ? '+' : '-',
+ id->base.e_base_bx10 ? '+' : '-',
+ id->base.e_base_px ? '+' : '-');
+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n",
+ id->base.e10g_base_sr ? '+' : '-',
+ id->base.e10g_base_lr ? '+' : '-',
+ id->base.e10g_base_lrm ? '+' : '-',
+ id->base.e10g_base_er ? '+' : '-');
+
+ if (!id->base.sfp_ct_passive && !id->base.sfp_ct_active &&
+ !id->base.e1000_base_t) {
+ char len_9um[16], len_om[16];
+
+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n",
+ be16_to_cpup(&id->base.optical_wavelength));
+
+ if (id->base.link_len[0] == 255)
+ strcpy(len_9um, ">254km");
+ else if (id->base.link_len[1] && id->base.link_len[1] != 255)
+ sprintf(len_9um, "%um",
+ id->base.link_len[1] * 100);
+ else if (id->base.link_len[0])
+ sprintf(len_9um, "%ukm", id->base.link_len[0]);
+ else if (id->base.link_len[1] == 255)
+ strcpy(len_9um, ">25.4km");
+ else
+ strcpy(len_9um, "unsupported");
+
+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um);
+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
+ sff_link_len(len_om, sizeof(len_om),
+ id->base.link_len[3], 10));
+ dev_info(sfp->dev, " 50µm MM OM2: %s\n",
+ sff_link_len(len_om, sizeof(len_om),
+ id->base.link_len[2], 10));
+ dev_info(sfp->dev, " 50µm MM OM3: %s\n",
+ sff_link_len(len_om, sizeof(len_om),
+ id->base.link_len[5], 10));
+ dev_info(sfp->dev, " 50µm MM OM4: %s\n",
+ sff_link_len(len_om, sizeof(len_om),
+ id->base.link_len[4], 10));
+ } else {
+ char len[16];
+ dev_info(sfp->dev, " Copper length: %s\n",
+ sff_link_len(len, sizeof(len),
+ id->base.link_len[4], 1));
+ }
+
+ dev_info(sfp->dev, " Options: %s\n",
+ sff_bitfield(options, sizeof(options), sfp_options,
+ be16_to_cpu(id->ext.options)));
+ dev_info(sfp->dev, " Diagnostics: %s\n",
+ sff_bitfield(options, sizeof(options), diagmon,
+ id->ext.diagmon));
+ dev_info(sfp->dev, " EnhOpts: %s\n",
+ sff_bitfield(options, sizeof(options), sfp_enhopts,
+ id->ext.enhopts));
+}
+
static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
{
/* SFP module inserted - read I2C data */
@@ -1835,9 +2048,9 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
}
}
- /* Cotsworks do not seem to update the checksums when they
- * do the final programming with the final module part number,
- * serial number and date code.
+ /* Cotsworks do not seem to update the checksums when they update the
+ * module part number, serial number and date code. They also format
+ * the date code incorrectly.
*/
cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16);
cotsworks_sfbg = !memcmp(id.base.vendor_pn, "SFBG", 4);
@@ -1897,14 +2110,9 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
}
}
- sfp->id = id;
+ sfp_print_module_info(sfp, &id, cotsworks);
- dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
- (int)sizeof(id.base.vendor_name), id.base.vendor_name,
- (int)sizeof(id.base.vendor_pn), id.base.vendor_pn,
- (int)sizeof(id.base.vendor_rev), id.base.vendor_rev,
- (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn,
- (int)sizeof(id.ext.datecode), id.ext.datecode);
+ sfp->id = id;
/* Check whether we support this module */
if (!sfp->type->module_supported(&id)) {
--
cgit v1.2.3
From e16986770e91289be92da37245e9a4bf668f24bd Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 16 Aug 2020 09:32:18 +0100
Subject: net: phy: pass supported PHY interface types to phylib
Pass the supported PHY interface types to phylib so that PHY drivers
can select an appropriate host configuration mode for their interface
according to the host capabilities.
This is only done for SFP modules presently.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 18 ++++++++++++++++++
include/linux/phy.h | 3 +++
2 files changed, 21 insertions(+)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1454e8d199de..7479040ce98a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2152,6 +2152,8 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
pl->netdev->sfp_bus = NULL;
}
+static DECLARE_PHY_INTERFACE_MASK(phylink_sfp_interfaces);
+
static const phy_interface_t phylink_sfp_interface_preference[] = {
PHY_INTERFACE_MODE_USXGMII,
PHY_INTERFACE_MODE_10GBASER,
@@ -2375,6 +2377,10 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
else
mode = MLO_AN_INBAND;
+ /* Set the PHY's host supported interfaces */
+ phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces,
+ pl->config->supported_interfaces);
+
/* Do the initial configuration */
ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
if (ret < 0)
@@ -2763,4 +2769,16 @@ void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,
}
EXPORT_SYMBOL_GPL(phylink_mii_c45_pcs_get_state);
+static int __init phylink_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(phylink_sfp_interface_preference); i++)
+ set_bit(phylink_sfp_interface_preference[i],
+ phylink_sfp_interfaces);
+
+ return 0;
+}
+module_init(phylink_init);
+
MODULE_LICENSE("GPL v2");
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 92e174a35fde..ef3d16e91ae1 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -647,6 +647,9 @@ struct phy_device {
/* used with phy_speed_down */
__ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old);
+ /* supported PHY interface types */
+ DECLARE_PHY_INTERFACE_MASK(host_interfaces);
+
/* Energy efficient ethernet modes which should be prohibited */
u32 eee_broken_modes;
--
cgit v1.2.3
From 5f39ed83ac1970d7c644cd7d31dba77315b30d38 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 16 Aug 2020 09:32:18 +0100
Subject: net: phy: marvell10g: select host interface configuration
Select the host interface configuration according to the capabilities
of the host; this allows the kernel to support SFP modules using the
88x3310.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell10g.c | 52 +++++++++++++++++++++++++++++++++++++++-----
1 file changed, 47 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 57ba639c7a2f..e476cd33ee30 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -718,15 +718,41 @@ static int mv3340_init_interface(struct phy_device *phydev, int mactype)
return err;
}
+static int mv3310_select_mode(struct phy_device *phydev,
+ unsigned long *host_interfaces)
+{
+ int mac_type = -1;
+
+ if (test_bit(PHY_INTERFACE_MODE_USXGMII, host_interfaces))
+ mac_type = 7;
+ else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces) &&
+ test_bit(PHY_INTERFACE_MODE_10GBASER, host_interfaces))
+ mac_type = 4;
+ else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces) &&
+ test_bit(PHY_INTERFACE_MODE_RXAUI, host_interfaces))
+ mac_type = 0;
+ else if (test_bit(PHY_INTERFACE_MODE_10GBASER, host_interfaces))
+ mac_type = 6;
+ else if (test_bit(PHY_INTERFACE_MODE_RXAUI, host_interfaces))
+ mac_type = 2;
+ else if (test_bit(PHY_INTERFACE_MODE_SGMII, host_interfaces))
+ mac_type = 4;
+
+ return mac_type;
+}
+
static int mv3310_config_init(struct phy_device *phydev)
{
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
const struct mv3310_chip *chip = to_mv3310_chip(phydev);
- int err, mactype;
+ int ret, err, mactype = -1;
/* Check that the PHY interface type is compatible */
- if (!test_bit(phydev->interface, priv->supported_interfaces))
+ if (!phy_interface_empty(phydev->host_interfaces)) {
+ mactype = mv3310_select_mode(phydev, phydev->host_interfaces);
+ } else if (!test_bit(phydev->interface, priv->supported_interfaces)) {
return -ENODEV;
+ }
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -735,9 +761,25 @@ static int mv3310_config_init(struct phy_device *phydev)
if (err)
return err;
- mactype = chip->get_mactype(phydev);
- if (mactype < 0)
- return mactype;
+ if (mactype == -1) {
+ mactype = chip->get_mactype(phydev);
+ if (mactype < 0)
+ return mactype;
+ } else {
+ /* FIXME For 88x2210 */
+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2,
+ MV_V2_PORT_CTRL,
+ MV_V2_33X0_PORT_CTRL_MACTYPE_MASK,
+ mactype);
+ if (ret > 0)
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2,
+ MV_V2_PORT_CTRL,
+ MV_V2_33X0_PORT_CTRL_SWRST,
+ MV_V2_33X0_PORT_CTRL_SWRST);
+
+ if (ret < 0)
+ return ret;
+ }
err = chip->init_interface(phydev, mactype);
if (err) {
--
cgit v1.2.3
From 896c0894fd55f5c8f4953e9968329418fb073e12 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 23 Dec 2019 23:24:17 +0000
Subject: net: phy: add supported_interfaces to phylib
Add a supported_interfaces member to phylib so we know which
interfaces a PHY supports. Currently, set any unconverted driver
to indicate all interfaces are supported.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
include/linux/phy.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ef3d16e91ae1..66c062a8e69d 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -649,6 +649,7 @@ struct phy_device {
/* supported PHY interface types */
DECLARE_PHY_INTERFACE_MASK(host_interfaces);
+ DECLARE_PHY_INTERFACE_MASK(supported_interfaces);
/* Energy efficient ethernet modes which should be prohibited */
u32 eee_broken_modes;
--
cgit v1.2.3
From 7ed98071c97472d39b9dd0c3b995098948262050 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 23 Dec 2019 23:25:35 +0000
Subject: net: phy: add supported_interfaces to bcm84881
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/bcm84881.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index 9717a1626f3f..cba3ffc0708f 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -51,6 +51,10 @@ static int bcm84881_probe(struct phy_device *phydev)
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
return -ENODEV;
+ __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, phydev->supported_interfaces);
+
return 0;
}
--
cgit v1.2.3
From 387177f36f60556f41939fd43552f1c0189c9e96 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 23 Dec 2019 23:25:49 +0000
Subject: net: phy: add supported_interfaces to marvell PHYs
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4509b5b3ff91..568f6f48463f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2706,6 +2706,15 @@ static int marvell_probe_pause(struct phy_device *phydev, u16 tx_pause_mask,
{
struct marvell_priv *priv;
+ __set_bit(PHY_INTERFACE_MODE_GMII, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_TBI, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_ID, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RTBI, phydev->supported_interfaces);
+
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
--
cgit v1.2.3
From c2c3b299a410ad0c21b9eb2a7c3d50d1210354b0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 23 Dec 2019 23:26:04 +0000
Subject: net: phy: add supported_interfaces to marvell10g PHYs
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/marvell10g.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index e476cd33ee30..f88f7fcfcc48 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -522,6 +522,10 @@ static int mv3310_probe(struct phy_device *phydev)
(phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
return -ENODEV;
+ __set_bit(PHY_INTERFACE_MODE_SGMII, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, phydev->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, phydev->supported_interfaces);
+
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
--
cgit v1.2.3
From 230e9094761227dbf3ea50f49f2182b39ee25e2e Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 3 Mar 2020 12:12:43 +0000
Subject: net: phylink: use phy interface mode bitmaps
Use the phy interface mode bitmaps for SFP modules and PHYs to select
the operating interface for SFPs and PHYs with SFPs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/phy/phylink.c | 57 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 46 insertions(+), 11 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 7479040ce98a..a2859dd7bde0 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2381,19 +2381,54 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
phy_interface_and(phy->host_interfaces, phylink_sfp_interfaces,
pl->config->supported_interfaces);
- /* Do the initial configuration */
- ret = phylink_sfp_config(pl, mode, phy->supported, phy->advertising);
- if (ret < 0)
- return ret;
+ if (!phy_interface_empty(phy->supported_interfaces) &&
+ !phy_interface_empty(pl->config->supported_interfaces)) {
+ interface = phylink_select_interface(pl,
+ phy->supported_interfaces,
+ "phy");
+ if (interface == PHY_INTERFACE_MODE_NA) {
+ phylink_err(pl,
+ "selection of interface for PHY failed\n");
+ return -EINVAL;
+ }
- interface = pl->link_config.interface;
- ret = phylink_attach_phy(pl, phy, interface);
- if (ret < 0)
- return ret;
+ if (pl->cur_link_an_mode != mode ||
+ pl->link_config.interface != interface) {
+ pl->link_config.interface = interface;
+ pl->cur_link_an_mode = mode;
- ret = phylink_bringup_phy(pl, phy, interface);
- if (ret)
- phy_detach(phy);
+ phylink_info(pl, "switched to %s/%s link mode\n",
+ phylink_an_mode_str(mode),
+ phy_modes(interface));
+ }
+
+ ret = phylink_attach_phy(pl, phy, interface);
+ if (ret < 0)
+ return ret;
+
+ ret = phylink_bringup_phy(pl, phy, interface);
+ if (ret)
+ phy_detach(phy);
+
+ if (!test_bit(PHYLINK_DISABLE_STOPPED,
+ &pl->phylink_disable_state))
+ phylink_mac_initial_config(pl, false);
+ } else {
+ /* Do the initial configuration */
+ ret = phylink_sfp_config(pl, mode, phy->supported,
+ phy->advertising);
+ if (ret < 0)
+ return ret;
+
+ interface = pl->link_config.interface;
+ ret = phylink_attach_phy(pl, phy, interface);
+ if (ret < 0)
+ return ret;
+
+ ret = phylink_bringup_phy(pl, phy, interface);
+ if (ret)
+ phy_detach(phy);
+ }
return ret;
}
--
cgit v1.2.3
From 8e691e5bcf4ad1b789fbe84afe15b213469587b7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 22 Jun 2020 01:05:59 +0100
Subject: net: dsa/bcm_sf2: fix pause mode validation
The implementation appears not to support pause modes on anything
but RGMII, RGMII_TXID, MII and REVMII interface modes. Let phylink
know that detail.
(This may not be correct; particularly see the FIXMEs in this patch.)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/bcm_sf2.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 3b018fcf4412..08a723729fce 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -677,6 +677,7 @@ static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ /* FIXME: Are RGMII_RXID and RGMII_ID actually supported? */
if (!phy_interface_mode_is_rgmii(state->interface) &&
state->interface != PHY_INTERFACE_MODE_MII &&
state->interface != PHY_INTERFACE_MODE_REVMII &&
@@ -694,8 +695,13 @@ static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
/* Allow all the expected bits */
phylink_set(mask, Autoneg);
phylink_set_port_modes(mask);
- phylink_set(mask, Pause);
- phylink_set(mask, Asym_Pause);
+ if (state->interface == PHY_INTERFACE_MODE_RGMII ||
+ state->interface == PHY_INTERFACE_MODE_RGMII_TXID ||
+ state->interface == PHY_INTERFACE_MODE_MII ||
+ state->interface == PHY_INTERFACE_MODE_REVMII) {
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+ }
/* With the exclusion of MII and Reverse MII, we support Gigabit,
* including Half duplex
@@ -730,6 +736,7 @@ static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
return;
switch (state->interface) {
+ /* FIXME: Are RGMII_RXID and RGMII_ID actually supported? */
case PHY_INTERFACE_MODE_RGMII:
id_mode_dis = 1;
fallthrough;
@@ -830,6 +837,7 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
else
offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+ /* FIXME: Are RGMII_RXID and RGMII_ID actually supported? */
if (interface == PHY_INTERFACE_MODE_RGMII ||
interface == PHY_INTERFACE_MODE_RGMII_TXID ||
interface == PHY_INTERFACE_MODE_MII ||
--
cgit v1.2.3
From e591f03bc0d6e177cbe48893d3983dc7e64af892 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 29 Jun 2020 23:16:21 +0100
Subject: phy: armada-38x: further augmentation of setup
Further augmentation of the comphy setup.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm/boot/dts/armada-38x.dtsi | 5 +-
drivers/phy/marvell/phy-armada38x-comphy.c | 147 +++++++++++++++++++++++++----
2 files changed, 132 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 9b1a24cc5e91..404943b5cdac 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -342,8 +342,9 @@
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
- reg-names = "comphy", "conf";
- reg = <0x18300 0x100>, <0x18460 4>;
+ reg-names = "comphy", "pipe", "conf";
+ reg = <0x18300 0x100>, <0xa0000 0x3000>,
+ <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 0fe408964334..0e86f484269c 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -15,32 +15,49 @@
#define MAX_A38X_COMPHY 6
#define MAX_A38X_PORTS 3
+/* Common PHY registers */
+#define COMPHY_REG_SIZE 0x28
#define COMPHY_CFG1 0x00
+#define COMPHY_CFG1_RX_INIT BIT(30)
#define COMPHY_CFG1_GEN_TX(x) ((x) << 26)
#define COMPHY_CFG1_GEN_TX_MSK COMPHY_CFG1_GEN_TX(15)
#define COMPHY_CFG1_GEN_RX(x) ((x) << 22)
#define COMPHY_CFG1_GEN_RX_MSK COMPHY_CFG1_GEN_RX(15)
+#define COMPHY_CFG1_POWER_UP_TX BIT(18)
+#define COMPHY_CFG1_POWER_UP_RX BIT(17)
+#define COMPHY_CFG1_POWER_UP_PLL BIT(16)
#define GEN_SGMII_1_25GBPS 6
#define GEN_SGMII_3_125GBPS 8
#define COMPHY_STAT1 0x18
#define COMPHY_STAT1_PLL_RDY_TX BIT(3)
#define COMPHY_STAT1_PLL_RDY_RX BIT(2)
+#define COMPHY_STAT1_RX_INIT_DONE BIT(0)
#define COMPHY_SELECTOR 0xfc
+/* Common PHY and Pipe Registers */
+#define PIPE_REG_SIZE 0x800
+#define PIPE_POWER_CTRL 0x148
+#define PIPE_POWER_CTRL_SFT_RST_NO_REG BIT(10)
+/* u-boot sets bit 0 during comphy initialisation, but it is undocumented */
+#define PIPE_POWER_CTRL_BIT0 BIT(0)
+
struct a38x_comphy;
struct a38x_comphy_lane {
void __iomem *base;
+ void __iomem *pipe;
struct a38x_comphy *priv;
unsigned int n;
int port;
+ u8 gen;
};
struct a38x_comphy {
void __iomem *base;
+ void __iomem *pipe;
void __iomem *conf;
struct device *dev;
struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
@@ -88,6 +105,7 @@ static void a38x_comphy_set_speed(struct a38x_comphy_lane *lane,
COMPHY_CFG1_GEN_RX(gen_rx));
}
+/* Poll every 1ms for 150ms for a status */
static int a38x_comphy_poll(struct a38x_comphy_lane *lane,
unsigned int offset, u32 mask, u32 value)
{
@@ -105,6 +123,97 @@ static int a38x_comphy_poll(struct a38x_comphy_lane *lane,
return ret;
}
+static int a38x_comphy_power_up(struct a38x_comphy_lane *lane)
+{
+ /* Power up TX, RX and PLL */
+ a38x_comphy_set_reg(lane, COMPHY_CFG1, 0,
+ COMPHY_CFG1_POWER_UP_TX | COMPHY_CFG1_POWER_UP_RX |
+ COMPHY_CFG1_POWER_UP_PLL);
+
+ /* Wait for power up */
+ return a38x_comphy_poll(lane, COMPHY_STAT1,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX);
+}
+
+static int a38x_comphy_rx_init(struct a38x_comphy_lane *lane)
+{
+ int ret;
+
+ /* Perform RX init */
+ a38x_comphy_set_reg(lane, COMPHY_CFG1, 0, COMPHY_CFG1_RX_INIT);
+
+ /* Wait for RX init done */
+ ret = a38x_comphy_poll(lane, COMPHY_STAT1, COMPHY_STAT1_RX_INIT_DONE,
+ COMPHY_STAT1_RX_INIT_DONE);
+
+ /* Clear RX init */
+ a38x_comphy_set_reg(lane, COMPHY_CFG1, COMPHY_CFG1_RX_INIT, 0);
+
+ return ret;
+}
+
+static int a38x_comphy_power_off(struct phy *phy)
+{
+ struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
+
+ a38x_set_conf(lane, false);
+
+ /* Soft reset */
+ if (lane->pipe) {
+ u32 rst = PIPE_POWER_CTRL_SFT_RST_NO_REG | PIPE_POWER_CTRL_BIT0;
+ u32 val;
+
+ val = readl_relaxed(lane->pipe + PIPE_POWER_CTRL);
+ writel(val | rst, lane->pipe + PIPE_POWER_CTRL);
+ }
+
+ a38x_comphy_set_reg(lane, COMPHY_CFG1,
+ COMPHY_CFG1_POWER_UP_TX | COMPHY_CFG1_POWER_UP_RX |
+ COMPHY_CFG1_POWER_UP_PLL, 0);
+
+ return 0;
+}
+
+static int a38x_comphy_power_on(struct phy *phy)
+{
+ struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
+ int ret;
+
+ /* Program the GEN settings */
+ a38x_comphy_set_speed(lane, lane->gen, lane->gen);
+
+ /* Soft reset */
+ if (lane->pipe) {
+ u32 rst = PIPE_POWER_CTRL_SFT_RST_NO_REG | PIPE_POWER_CTRL_BIT0;
+ u32 val;
+
+ val = readl_relaxed(lane->pipe + PIPE_POWER_CTRL);
+ writel(val | rst, lane->pipe + PIPE_POWER_CTRL);
+ writel(val & ~rst, lane->pipe + PIPE_POWER_CTRL);
+ }
+
+ /* Power up TX, RX and PLL and wait */
+ ret = a38x_comphy_power_up(lane);
+ if (ret)
+ goto fail;
+
+ /* Perform RX init */
+ ret = a38x_comphy_rx_init(lane);
+ if (ret)
+ goto fail;
+
+ a38x_set_conf(lane, true);
+
+ return 0;
+
+fail:
+ a38x_comphy_power_off(phy);
+ return ret;
+}
+
/*
* We only support changing the speed for comphys configured for GBE.
* Since that is all we do, we only poll for PLL ready status.
@@ -113,7 +222,6 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
{
struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
unsigned int gen;
- int ret;
if (mode != PHY_MODE_ETHERNET)
return -EINVAL;
@@ -132,23 +240,14 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
return -EINVAL;
}
- a38x_set_conf(lane, false);
-
- a38x_comphy_set_speed(lane, gen, gen);
-
- ret = a38x_comphy_poll(lane, COMPHY_STAT1,
- COMPHY_STAT1_PLL_RDY_TX |
- COMPHY_STAT1_PLL_RDY_RX,
- COMPHY_STAT1_PLL_RDY_TX |
- COMPHY_STAT1_PLL_RDY_RX);
-
- if (ret == 0)
- a38x_set_conf(lane, true);
+ lane->gen = gen;
- return ret;
+ return 0;
}
static const struct phy_ops a38x_comphy_ops = {
+ .power_on = a38x_comphy_power_on,
+ .power_off = a38x_comphy_power_off,
.set_mode = a38x_comphy_set_mode,
.owner = THIS_MODULE,
};
@@ -193,6 +292,7 @@ static int a38x_comphy_probe(struct platform_device *pdev)
struct a38x_comphy *priv;
struct resource *res;
void __iomem *base;
+ void __iomem *pipe = NULL;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -202,8 +302,16 @@ static int a38x_comphy_probe(struct platform_device *pdev)
if (IS_ERR(base))
return PTR_ERR(base);
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pipe");
+ if (res) {
+ pipe = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+ }
+
priv->dev = &pdev->dev;
priv->base = base;
+ priv->pipe = pipe;
/* Optional */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf");
@@ -230,16 +338,19 @@ static int a38x_comphy_probe(struct platform_device *pdev)
continue;
}
+ priv->lane[val].base = base + COMPHY_REG_SIZE * val;
+ if (pipe)
+ priv->lane[val].pipe = pipe + PIPE_REG_SIZE * val;
+ priv->lane[val].priv = priv;
+ priv->lane[val].n = val;
+ priv->lane[val].port = -1;
+
phy = devm_phy_create(&pdev->dev, child, &a38x_comphy_ops);
if (IS_ERR(phy)) {
of_node_put(child);
return PTR_ERR(phy);
}
- priv->lane[val].base = base + 0x28 * val;
- priv->lane[val].priv = priv;
- priv->lane[val].n = val;
- priv->lane[val].port = -1;
phy_set_drvdata(phy, &priv->lane[val]);
}
--
cgit v1.2.3
From cb633af31a0858f6e801f92a67d3929a2f1989e0 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 8 Jul 2020 11:37:25 +0100
Subject: net: mvneta: program 1ms autonegotiation clock divisor
Program the 1ms autonegotiation clock divisor according to the clocking
rate of neta - without this, the 1ms clock ticks at about 660us on
Armada 38x configured for 250MHz. Bring this into correct specification.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 697207b88444..c9a95c10392d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3962,7 +3962,7 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
MVNETA_GMAC_FORCE_LINK_PASS |
MVNETA_GMAC_CONFIG_MII_SPEED |
@@ -3974,7 +3974,7 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
} else {
/* 802.3z negotiation - only 1000base-X */
new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
- new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
MVNETA_GMAC_FORCE_LINK_PASS |
MVNETA_GMAC_CONFIG_MII_SPEED)) |
@@ -3987,6 +3987,10 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
}
+ /* Set the 1ms clock divisor */
+ if (new_clk == MVNETA_GMAC_1MS_CLOCK_ENABLE)
+ new_clk |= clk_get_rate(pp->clk) / 1000;
+
/* Armada 370 documentation says we can only change the port mode
* and in-band enable when the link is down, so force it down
* while making these changes. We also do this for GMAC_CTRL2
--
cgit v1.2.3
From 76bebe694b25b49f7f1369efbafdb77456f2c4d8 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Sun, 28 Jun 2020 13:03:47 +0100
Subject: net: mvneta: convert to use mac_prepare()/mac_finish()
Convert mvneta to use the mac_prepare() and mac_finish() methods in
preparation to converting mvneta to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 78 ++++++++++++++++++++++++-----------
1 file changed, 53 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index c9a95c10392d..7a1aca759ff2 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3919,6 +3919,32 @@ static void mvneta_mac_an_restart(struct phylink_config *config)
gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
}
+static int mvneta_mac_prepare(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct net_device *ndev = to_net_dev(config->dev);
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 val;
+
+ if (pp->phy_interface != interface ||
+ phylink_autoneg_inband(mode)) {
+ /* Force the link down when changing the interface or if in
+ * in-band mode. According to Armada 370 documentation, we
+ * can only change the port mode and in-band enable when the
+ * link is down.
+ */
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
+ val |= MVNETA_GMAC_FORCE_LINK_DOWN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ if (pp->phy_interface != interface)
+ WARN_ON(phy_power_off(pp->comphy));
+
+ return 0;
+}
+
static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state)
{
@@ -3963,9 +3989,7 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
- new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_CONFIG_MII_SPEED |
+ new_an = (new_an & ~(MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_CONFIG_FULL_DUPLEX)) |
MVNETA_GMAC_INBAND_AN_ENABLE |
@@ -3975,9 +3999,7 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
/* 802.3z negotiation - only 1000base-X */
new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
- new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_FORCE_LINK_PASS |
- MVNETA_GMAC_CONFIG_MII_SPEED)) |
+ new_an = (new_an & ~MVNETA_GMAC_CONFIG_MII_SPEED) |
MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_CONFIG_GMII_SPEED |
/* The MAC only supports FD mode */
@@ -3991,31 +4013,12 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
if (new_clk == MVNETA_GMAC_1MS_CLOCK_ENABLE)
new_clk |= clk_get_rate(pp->clk) / 1000;
- /* Armada 370 documentation says we can only change the port mode
- * and in-band enable when the link is down, so force it down
- * while making these changes. We also do this for GMAC_CTRL2
- */
- if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X ||
- (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
- (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
- MVNETA_GMAC_FORCE_LINK_DOWN);
- }
-
-
/* When at 2.5G, the link partner can send frames with shortened
* preambles.
*/
if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
- if (pp->phy_interface != state->interface) {
- if (pp->comphy)
- WARN_ON(phy_power_off(pp->comphy));
- WARN_ON(mvneta_config_interface(pp, state->interface));
- }
-
if (new_ctrl0 != gmac_ctrl0)
mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
if (new_ctrl2 != gmac_ctrl2)
@@ -4034,6 +4037,29 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
}
}
+static int mvneta_mac_finish(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct net_device *ndev = to_net_dev(config->dev);
+ struct mvneta_port *pp = netdev_priv(ndev);
+ u32 val;
+
+ if (pp->phy_interface != interface)
+ /* Enable the Serdes PHY */
+ WARN_ON(mvneta_config_interface(pp, interface));
+
+ /* Allow the link to come up if in in-band mode, otherwise the
+ * link is forced via mac_link_down()/mac_link_up()
+ */
+ if (phylink_autoneg_inband(mode)) {
+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ }
+
+ return 0;
+}
+
static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
{
u32 lpi_ctl1;
@@ -4123,7 +4149,9 @@ static const struct phylink_mac_ops mvneta_phylink_ops = {
.validate = mvneta_validate,
.mac_pcs_get_state = mvneta_mac_pcs_get_state,
.mac_an_restart = mvneta_mac_an_restart,
+ .mac_prepare = mvneta_mac_prepare,
.mac_config = mvneta_mac_config,
+ .mac_finish = mvneta_mac_finish,
.mac_link_down = mvneta_mac_link_down,
.mac_link_up = mvneta_mac_link_up,
};
--
cgit v1.2.3
From d987a2494717ac88fbdc6695fd6c669ac70206b7 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 8 Jul 2020 11:44:36 +0100
Subject: net: mvneta: move 1ms clock control into mac_prepare/mac_finish
Move the 1ms clock control out of mac_config() into mac_prepare() and
mac_finish(), which simplifies the mac_config() code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 7a1aca759ff2..341fbec93bdb 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3942,6 +3942,14 @@ static int mvneta_mac_prepare(struct phylink_config *config, unsigned int mode,
if (pp->phy_interface != interface)
WARN_ON(phy_power_off(pp->comphy));
+ /* Enable the 1ms clock */
+ if (phylink_autoneg_inband(mode)) {
+ unsigned long rate = clk_get_rate(pp->clk);
+
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER,
+ MVNETA_GMAC_1MS_CLOCK_ENABLE | (rate / 1000));
+ }
+
return 0;
}
@@ -3953,14 +3961,12 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
u32 new_ctrl4, gmac_ctrl4 = mvreg_read(pp, MVNETA_GMAC_CTRL_4);
- u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
MVNETA_GMAC2_PORT_RESET);
new_ctrl4 = gmac_ctrl4 & ~(MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE);
- new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_INBAND_RESTART_AN |
MVNETA_GMAC_AN_SPEED_EN |
@@ -3988,7 +3994,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = (new_an & ~(MVNETA_GMAC_CONFIG_MII_SPEED |
MVNETA_GMAC_CONFIG_GMII_SPEED |
MVNETA_GMAC_CONFIG_FULL_DUPLEX)) |
@@ -3998,7 +4003,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
} else {
/* 802.3z negotiation - only 1000base-X */
new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
- new_clk = MVNETA_GMAC_1MS_CLOCK_ENABLE;
new_an = (new_an & ~MVNETA_GMAC_CONFIG_MII_SPEED) |
MVNETA_GMAC_INBAND_AN_ENABLE |
MVNETA_GMAC_CONFIG_GMII_SPEED |
@@ -4009,10 +4013,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
}
- /* Set the 1ms clock divisor */
- if (new_clk == MVNETA_GMAC_1MS_CLOCK_ENABLE)
- new_clk |= clk_get_rate(pp->clk) / 1000;
-
/* When at 2.5G, the link partner can send frames with shortened
* preambles.
*/
@@ -4025,8 +4025,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
if (new_ctrl4 != gmac_ctrl4)
mvreg_write(pp, MVNETA_GMAC_CTRL_4, new_ctrl4);
- if (new_clk != gmac_clk)
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
if (new_an != gmac_an)
mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
@@ -4042,7 +4040,14 @@ static int mvneta_mac_finish(struct phylink_config *config, unsigned int mode,
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 val;
+ u32 val, clk;
+
+ /* Disable 1ms clock if not in in-band mode */
+ if (!phylink_autoneg_inband(mode)) {
+ clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
+ clk &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, clk);
+ }
if (pp->phy_interface != interface)
/* Enable the Serdes PHY */
--
cgit v1.2.3
From c8eb55edd9e8b00863f2dd8cafb7937b0b3dea02 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Mon, 22 Jun 2020 17:21:43 +0100
Subject: net: mvneta: convert to phylink pcs operations
An initial stab at converting mvneta to PCS operations. There's a few
FIXMEs to be solved.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvneta.c | 178 +++++++++++++++++++++-------------
1 file changed, 109 insertions(+), 69 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 341fbec93bdb..c9bad557f8f9 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -499,6 +499,7 @@ struct mvneta_port {
unsigned int tx_csum_limit;
struct phylink *phylink;
struct phylink_config phylink_config;
+ struct phylink_pcs phylink_pcs;
struct phy *comphy;
struct mvneta_bm *bm_priv;
@@ -3824,6 +3825,111 @@ static int mvneta_set_mac_addr(struct net_device *dev, void *addr)
return 0;
}
+static struct mvneta_port *mvneta_pcs_to_port(struct phylink_pcs *pcs)
+{
+ return container_of(pcs, struct mvneta_port, phylink_pcs);
+}
+
+static void mvneta_pcs_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
+ u32 gmac_stat;
+
+ gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
+
+ if (gmac_stat & MVNETA_GMAC_SPEED_1000)
+ state->speed =
+ state->interface == PHY_INTERFACE_MODE_2500BASEX ?
+ SPEED_2500 : SPEED_1000;
+ else if (gmac_stat & MVNETA_GMAC_SPEED_100)
+ state->speed = SPEED_100;
+ else
+ state->speed = SPEED_10;
+
+ state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
+ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
+ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
+
+ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_RX;
+ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_TX;
+}
+
+static int mvneta_pcs_config(struct phylink_pcs *pcs,
+ unsigned int mode, phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
+ u32 mask, val, an, old_an, changed;
+
+ mask = MVNETA_GMAC_INBAND_AN_ENABLE |
+ MVNETA_GMAC_INBAND_RESTART_AN |
+ MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_FLOW_CTRL_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+
+ if (phylink_autoneg_inband(mode)) {
+ mask |= MVNETA_GMAC_CONFIG_MII_SPEED |
+ MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+ val = MVNETA_GMAC_INBAND_AN_ENABLE;
+
+ if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ /* SGMII mode receives the speed and duplex from PHY */
+ val |= MVNETA_GMAC_AN_SPEED_EN |
+ MVNETA_GMAC_AN_DUPLEX_EN;
+ } else {
+ /* 802.3z mode has fixed speed and duplex */
+ val |= MVNETA_GMAC_CONFIG_GMII_SPEED |
+ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
+
+ /* The FLOW_CTRL_EN bit selects either the hardware
+ * automatically or the CONFIG_FLOW_CTRL manually
+ * controls the GMAC pause mode.
+ */
+ if (permit_pause_to_mac)
+ val |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
+
+ /* Update the advertisement bits */
+ mask |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+ if (phylink_test(advertising, Pause))
+ val |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
+ }
+ } else {
+ /* Phy or fixed speed - disable in-band AN modes */
+ val = 0;
+ }
+
+ old_an = an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+ an = (an & ~mask) | val;
+ changed = old_an ^ an;
+ if (changed)
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, an);
+
+ /* We are only interested in the advertisement bits changing */
+ return !!(changed & MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL);
+}
+
+static void mvneta_pcs_an_restart(struct phylink_pcs *pcs)
+{
+ struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
+ u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
+
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+ gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
+ gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
+}
+
+static const struct phylink_pcs_ops mvneta_phylink_pcs_ops = {
+ .pcs_get_state = mvneta_pcs_get_state,
+ .pcs_config = mvneta_pcs_config,
+ .pcs_an_restart = mvneta_pcs_an_restart,
+};
+
static void mvneta_validate(struct phylink_config *config,
unsigned long *supported,
struct phylink_link_state *state)
@@ -3878,47 +3984,6 @@ static void mvneta_validate(struct phylink_config *config,
phylink_helper_basex_speed(state);
}
-static void mvneta_mac_pcs_get_state(struct phylink_config *config,
- struct phylink_link_state *state)
-{
- struct net_device *ndev = to_net_dev(config->dev);
- struct mvneta_port *pp = netdev_priv(ndev);
- u32 gmac_stat;
-
- gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
-
- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
- state->speed =
- state->interface == PHY_INTERFACE_MODE_2500BASEX ?
- SPEED_2500 : SPEED_1000;
- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
- state->speed = SPEED_100;
- else
- state->speed = SPEED_10;
-
- state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
- state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
- state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
-
- state->pause = 0;
- if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
- state->pause |= MLO_PAUSE_RX;
- if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
- state->pause |= MLO_PAUSE_TX;
-}
-
-static void mvneta_mac_an_restart(struct phylink_config *config)
-{
- struct net_device *ndev = to_net_dev(config->dev);
- struct mvneta_port *pp = netdev_priv(ndev);
- u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
-}
-
static int mvneta_mac_prepare(struct phylink_config *config, unsigned int mode,
phy_interface_t interface)
{
@@ -3961,18 +4026,11 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
u32 new_ctrl4, gmac_ctrl4 = mvreg_read(pp, MVNETA_GMAC_CTRL_4);
- u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
MVNETA_GMAC2_PORT_RESET);
new_ctrl4 = gmac_ctrl4 & ~(MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE);
- new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_INBAND_RESTART_AN |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
- MVNETA_GMAC_AN_FLOW_CTRL_EN |
- MVNETA_GMAC_AN_DUPLEX_EN);
/* Even though it might look weird, when we're configured in
* SGMII or QSGMII mode, the RGMII bit needs to be set.
@@ -3984,9 +4042,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
phy_interface_mode_is_8023z(state->interface))
new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
- if (phylink_test(state->advertising, Pause))
- new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
-
if (!phylink_autoneg_inband(mode)) {
/* Phy or fixed speed - nothing to do, leave the
* configured speed, duplex and flow control as-is.
@@ -3994,23 +4049,9 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
/* SGMII mode receives the state from the PHY */
new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- new_an = (new_an & ~(MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX)) |
- MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
} else {
/* 802.3z negotiation - only 1000base-X */
new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
- new_an = (new_an & ~MVNETA_GMAC_CONFIG_MII_SPEED) |
- MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- /* The MAC only supports FD mode */
- MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
- if (state->pause & MLO_PAUSE_AN && state->an_enabled)
- new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
}
/* When at 2.5G, the link partner can send frames with shortened
@@ -4025,8 +4066,6 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
if (new_ctrl4 != gmac_ctrl4)
mvreg_write(pp, MVNETA_GMAC_CTRL_4, new_ctrl4);
- if (new_an != gmac_an)
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
if (gmac_ctrl2 & MVNETA_GMAC2_PORT_RESET) {
while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
@@ -4152,8 +4191,6 @@ static void mvneta_mac_link_up(struct phylink_config *config,
static const struct phylink_mac_ops mvneta_phylink_ops = {
.validate = mvneta_validate,
- .mac_pcs_get_state = mvneta_mac_pcs_get_state,
- .mac_an_restart = mvneta_mac_an_restart,
.mac_prepare = mvneta_mac_prepare,
.mac_config = mvneta_mac_config,
.mac_finish = mvneta_mac_finish,
@@ -5233,6 +5270,9 @@ static int mvneta_probe(struct platform_device *pdev)
goto err_free_irq;
}
+ pp->phylink_pcs.ops = &mvneta_phylink_pcs_ops;
+ phylink_set_pcs(phylink, &pp->phylink_pcs);
+
dev->tx_queue_len = MVNETA_MAX_TXD;
dev->watchdog_timeo = 5 * HZ;
dev->netdev_ops = &mvneta_netdev_ops;
--
cgit v1.2.3
From 72c827679c96ef310428ee26600366ae50896022 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Thu, 22 Dec 2016 16:03:15 +0000
Subject: net: mvneta: split out GMAC
Split out the code handling the GMAC from the rest of the driver. This
block appears to be shared amongst several revisions of the IP.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/Kconfig | 4 +
drivers/net/ethernet/marvell/Makefile | 1 +
drivers/net/ethernet/marvell/mvgmac.c | 356 ++++++++++++++++++++++++++++++++++
drivers/net/ethernet/marvell/mvgmac.h | 43 ++++
drivers/net/ethernet/marvell/mvneta.c | 305 ++++-------------------------
5 files changed, 438 insertions(+), 271 deletions(-)
create mode 100644 drivers/net/ethernet/marvell/mvgmac.c
create mode 100644 drivers/net/ethernet/marvell/mvgmac.h
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig
index fe0989c0fc25..e9149e6fab10 100644
--- a/drivers/net/ethernet/marvell/Kconfig
+++ b/drivers/net/ethernet/marvell/Kconfig
@@ -59,6 +59,7 @@ config MVNETA_BM_ENABLE
config MVNETA
tristate "Marvell Armada 370/38x/XP/37xx network interface support"
depends on ARCH_MVEBU || COMPILE_TEST
+ select MVGMAC
select MVMDIO
select PHYLINK
select PAGE_POOL
@@ -71,6 +72,9 @@ config MVNETA
driver, which should be used for the older Marvell SoCs
(Dove, Orion, Discovery, Kirkwood).
+config MVGMAC
+ tristate
+
config MVNETA_BM
tristate
depends on !64BIT
diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile
index 9f88fe822555..b1442ff46abf 100644
--- a/drivers/net/ethernet/marvell/Makefile
+++ b/drivers/net/ethernet/marvell/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_MVMDIO) += mvmdio.o
obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
obj-$(CONFIG_MVNETA_BM) += mvneta_bm.o
obj-$(CONFIG_MVNETA) += mvneta.o
+obj-$(CONFIG_MVGMAC) += mvgmac.o
obj-$(CONFIG_MVPP2) += mvpp2/
obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o
obj-$(CONFIG_SKGE) += skge.o
diff --git a/drivers/net/ethernet/marvell/mvgmac.c b/drivers/net/ethernet/marvell/mvgmac.c
new file mode 100644
index 000000000000..6c0b7c5c0b24
--- /dev/null
+++ b/drivers/net/ethernet/marvell/mvgmac.c
@@ -0,0 +1,356 @@
+/*
+ * GMAC driver for Marvell network interfaces on Armada SoCs.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Rami Rosen <rosenr@marvell.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * Split from mvneta and mvpp2 by Russell King.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/phylink.h>
+
+#include "mvgmac.h"
+
+enum {
+ GMAC_CTRL0_REG = 0x00,
+ GMAC_CTRL0_PORT_ENABLE = BIT(0),
+ GMAC_CTRL0_PORT_1000BASE_X = BIT(1),
+ GMAC_CTRL0_MAX_RX_SIZE_SHIFT = 2,
+ GMAC_CTRL0_MAX_RX_SIZE_MASK = 0x1fff << GMAC_CTRL0_MAX_RX_SIZE_SHIFT,
+ GMAC_CTRL0_MIB_CNTR_ENABLE = BIT(15),
+
+ GMAC_CTRL2_REG = 0x08,
+ GMAC_CTRL2_INBAND_AN_SGMII = BIT(0),
+ GMAC_CTRL2_PCS_ENABLE = BIT(3),
+ GMAC_CTRL2_PORT_RGMII = BIT(4),
+ GMAC_CTRL2_PORT_RESET = BIT(6),
+
+ GMAC_ANEG_REG = 0x0c,
+ GMAC_ANEG_FORCE_LINK_DOWN = BIT(0),
+ GMAC_ANEG_FORCE_LINK_PASS = BIT(1),
+ GMAC_ANEG_INBAND_AN_ENABLE = BIT(2),
+ GMAC_ANEG_AN_BYPASS_ENABLE = BIT(3),
+ GMAC_ANEG_INBAND_RESTART_AN = BIT(4),
+ GMAC_ANEG_MII_SPEED = BIT(5),
+ GMAC_ANEG_GMII_SPEED = BIT(6),
+ GMAC_ANEG_AN_SPEED_ENABLE = BIT(7),
+ GMAC_ANEG_CONFIG_FLOW_CTRL = BIT(8),
+ GMAC_ANEG_ADVERT_SYM_FLOW_CTRL = BIT(9),
+ GMAC_ANEG_AN_FLOW_CTRL_ENABLE = BIT(11),
+ GMAC_ANEG_FULL_DUPLEX = BIT(12),
+ GMAC_ANEG_AN_DUPLEX_ENABLE = BIT(13),
+
+ GMAC_STATUS_REG = 0x10,
+ MVGMAC_LINK_UP = BIT(0),
+ MVGMAC_SPEED_1000 = BIT(1),
+ MVGMAC_SPEED_100 = BIT(2),
+ MVGMAC_FULL_DUPLEX = BIT(3),
+ MVGMAC_RX_FLOW_CTRL_ENABLE = BIT(4),
+ MVGMAC_TX_FLOW_CTRL_ENABLE = BIT(5),
+ MVGMAC_RX_FLOW_CTRL_ACTIVE = BIT(6),
+ MVGMAC_TX_FLOW_CTRL_ACTIVE = BIT(7),
+ MVGMAC_AN_COMPLETE = BIT(11),
+ MVGMAC_SYNC_OK = BIT(14),
+
+ GMAC_CTRL4_REG = 0x90,
+ GMAC_CTRL4_SHORT_PREAMBLE_ENABLE = BIT(1),
+
+ GMAC_LPI_CTRL0_REG = 0xc0,
+ GMAC_LPI_CTRL0_TS = 0xff << 8,
+ GMAC_LPI_CTRL1_REG = 0xc4,
+ GMAC_LPI_CTRL1_REQ_EN = BIT(0),
+ GMAC_LPI_CTRL2_REG = 0xc8,
+ GMAC_LPI_STATUS_REG = 0xcc,
+ GMAC_LPI_CNTR_REG = 0xd0,
+};
+
+#define insert(var, mask, val) ({ \
+ u32 __mask = mask; \
+ ((var) & ~(__mask)) | (((val) << __ffs(__mask)) & (__mask)); \
+})
+
+/* Change maximum receive size of the port. */
+void mvgmac_set_max_rx_size(struct mvgmac *gmac, size_t max_rx_size)
+{
+ int size = (max_rx_size - MARVELL_HEADER_SIZE) / 2;
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_CTRL0_REG);
+ val = insert(val, GMAC_CTRL0_MAX_RX_SIZE_MASK, size);
+ writel_relaxed(val, gmac->base + GMAC_CTRL0_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_set_max_rx_size);
+
+/* Enable the port by setting the port enable bit of the MAC control register */
+void mvgmac_enable(struct mvgmac *gmac)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_CTRL0_REG);
+ val |= GMAC_CTRL0_PORT_ENABLE;
+ val |= GMAC_CTRL0_MIB_CNTR_ENABLE;
+ writel_relaxed(val, gmac->base + GMAC_CTRL0_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_enable);
+
+/* Disable the port */
+void mvgmac_disable(struct mvgmac *gmac)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_CTRL0_REG);
+ val &= ~GMAC_CTRL0_PORT_ENABLE;
+ writel_relaxed(val, gmac->base + GMAC_CTRL0_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_disable);
+
+void mvgmac_link_unforce(struct mvgmac *gmac)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_ANEG_REG);
+ val &= ~(GMAC_ANEG_FORCE_LINK_PASS | GMAC_ANEG_FORCE_LINK_DOWN);
+ writel_relaxed(val, gmac->base + GMAC_ANEG_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_link_unforce);
+
+void mvgmac_link_force_down(struct mvgmac *gmac)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_ANEG_REG);
+ val &= ~GMAC_ANEG_FORCE_LINK_PASS;
+ val |= GMAC_ANEG_FORCE_LINK_DOWN;
+ writel_relaxed(val, gmac->base + GMAC_ANEG_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_link_force_down);
+
+void mvgmac_link_down(struct mvgmac *gmac, int mode)
+{
+ if (!phylink_autoneg_inband(mode))
+ mvgmac_link_force_down(gmac);
+}
+EXPORT_SYMBOL_GPL(mvgmac_link_down);
+
+void mvgmac_link_up(struct mvgmac *gmac, int mode, int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_ANEG_REG);
+ val &= ~GMAC_ANEG_CONFIG_FLOW_CTRL;
+
+ if (!phylink_autoneg_inband(mode)) {
+ val &= ~(GMAC_ANEG_FORCE_LINK_DOWN |
+ GMAC_ANEG_MII_SPEED |
+ GMAC_ANEG_GMII_SPEED |
+ GMAC_ANEG_FULL_DUPLEX);
+ val |= GMAC_ANEG_FORCE_LINK_PASS;
+
+ if (speed == SPEED_1000 || speed == SPEED_2500)
+ val |= GMAC_ANEG_GMII_SPEED;
+ else if (speed == SPEED_100)
+ val |= GMAC_ANEG_MII_SPEED;
+
+ if (duplex == DUPLEX_FULL)
+ val |= GMAC_ANEG_FULL_DUPLEX;
+ }
+
+ if (tx_pause || rx_pause)
+ val |= GMAC_ANEG_CONFIG_FLOW_CTRL;
+
+ writel_relaxed(val, gmac->base + GMAC_ANEG_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_link_up);
+
+bool mvgmac_link_is_up(struct mvgmac *gmac)
+{
+ u32 gmac_stat = readl_relaxed(gmac->base + GMAC_STATUS_REG);
+
+ return !!(gmac_stat & MVGMAC_LINK_UP);
+}
+EXPORT_SYMBOL_GPL(mvgmac_link_is_up);
+
+void mvgmac_pcs_get_state(struct mvgmac *gmac, struct phylink_link_state *state)
+{
+ u32 gmac_stat = readl_relaxed(gmac->base + GMAC_STATUS_REG);
+
+ if (gmac_stat & MVGMAC_SPEED_1000)
+ state->speed =
+ state->interface == PHY_INTERFACE_MODE_2500BASEX ?
+ SPEED_2500 : SPEED_1000;
+ else if (gmac_stat & MVGMAC_SPEED_100)
+ state->speed = SPEED_100;
+ else
+ state->speed = SPEED_10;
+
+ state->an_complete = !!(gmac_stat & MVGMAC_AN_COMPLETE);
+ state->link = !!(gmac_stat & MVGMAC_LINK_UP);
+ state->duplex = !!(gmac_stat & MVGMAC_FULL_DUPLEX);
+
+ if (gmac_stat & MVGMAC_RX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_RX;
+ if (gmac_stat & MVGMAC_TX_FLOW_CTRL_ENABLE)
+ state->pause |= MLO_PAUSE_TX;
+}
+EXPORT_SYMBOL_GPL(mvgmac_pcs_get_state);
+
+void mvgmac_pcs_an_restart(struct mvgmac *gmac)
+{
+ u32 gmac_an = readl_relaxed(gmac->base + GMAC_ANEG_REG);
+
+ writel_relaxed(gmac_an | GMAC_ANEG_INBAND_RESTART_AN,
+ gmac->base + GMAC_ANEG_REG);
+ writel_relaxed(gmac_an & ~GMAC_ANEG_INBAND_RESTART_AN,
+ gmac->base + GMAC_ANEG_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_pcs_an_restart);
+
+int mvgmac_pcs_config(struct mvgmac *gmac, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ u32 mask, val, an, old_an, changed;
+
+ mask = GMAC_ANEG_INBAND_AN_ENABLE |
+ GMAC_ANEG_INBAND_RESTART_AN |
+ GMAC_ANEG_AN_SPEED_ENABLE |
+ GMAC_ANEG_AN_FLOW_CTRL_ENABLE |
+ GMAC_ANEG_AN_DUPLEX_ENABLE;
+
+ if (phylink_autoneg_inband(mode)) {
+ mask |= GMAC_ANEG_MII_SPEED |
+ GMAC_ANEG_GMII_SPEED |
+ GMAC_ANEG_FULL_DUPLEX;
+ val = GMAC_ANEG_INBAND_AN_ENABLE;
+
+ if (interface == PHY_INTERFACE_MODE_SGMII) {
+ /* SGMII mode receives the speed and duplex from PHY */
+ val |= GMAC_ANEG_AN_SPEED_ENABLE |
+ GMAC_ANEG_AN_DUPLEX_ENABLE;
+ } else {
+ /* 802.3z mode has fixed speed and duplex */
+ val |= GMAC_ANEG_GMII_SPEED |
+ GMAC_ANEG_FULL_DUPLEX;
+
+ /* The FLOW_CTRL_ENABLE bit selects either the hardware
+ * automatically or the GMAC_ANEG_FLOW_CTRL manually
+ * controls the GMAC pause mode.
+ */
+ if (permit_pause_to_mac)
+ val |= GMAC_ANEG_AN_FLOW_CTRL_ENABLE;
+
+ /* Update the advertisement bits */
+ mask |= GMAC_ANEG_ADVERT_SYM_FLOW_CTRL;
+ if (phylink_test(advertising, Pause))
+ val |= GMAC_ANEG_ADVERT_SYM_FLOW_CTRL;
+ }
+ } else {
+ /* Phy or fixed speed - disable in-band AN modes */
+ val = 0;
+ }
+
+ old_an = an = readl_relaxed(gmac->base + GMAC_ANEG_REG);
+ an = (an & ~mask) | val;
+ changed = old_an ^ an;
+ if (changed)
+ writel_relaxed(an, gmac->base + GMAC_ANEG_REG);
+
+ /* We are only interested in the advertisement bits changing */
+ return !!(changed & GMAC_ANEG_ADVERT_SYM_FLOW_CTRL);
+}
+EXPORT_SYMBOL_GPL(mvgmac_pcs_config);
+
+void mvgmac_config_mac(struct mvgmac *gmac, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ u32 new_ctrl0, gmac_ctrl0 = readl_relaxed(gmac->base + GMAC_CTRL0_REG);
+ u32 new_ctrl2, gmac_ctrl2 = readl_relaxed(gmac->base + GMAC_CTRL2_REG);
+ u32 new_ctrl4, gmac_ctrl4 = readl_relaxed(gmac->base + GMAC_CTRL4_REG);
+
+ new_ctrl0 = gmac_ctrl0 & ~GMAC_CTRL0_PORT_1000BASE_X;
+ new_ctrl2 = gmac_ctrl2 & ~(GMAC_CTRL2_INBAND_AN_SGMII |
+ GMAC_CTRL2_PORT_RESET);
+ new_ctrl4 = gmac_ctrl4 & ~GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+
+ /* Even though it might look weird, when we're configured in
+ * SGMII or QSGMII mode, the RGMII bit needs to be set.
+ */
+ new_ctrl2 |= GMAC_CTRL2_PORT_RGMII;
+
+ if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
+ state->interface == PHY_INTERFACE_MODE_SGMII ||
+ phy_interface_mode_is_8023z(state->interface))
+ new_ctrl2 |= GMAC_CTRL2_PCS_ENABLE;
+
+ if (!phylink_autoneg_inband(mode)) {
+ /* Phy or fixed speed - nothing to do, leave the
+ * configured speed, duplex and flow control as-is.
+ */
+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ /* SGMII mode receives the state from the PHY */
+ new_ctrl2 |= GMAC_CTRL2_INBAND_AN_SGMII;
+ } else {
+ /* 802.3z negotiation - 1000BaseX */
+ new_ctrl0 |= GMAC_CTRL0_PORT_1000BASE_X;
+ }
+
+ /* When at 2.5G, the link partner can send frames with shortened
+ * preambles.
+ */
+ if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
+ new_ctrl4 |= GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+
+ if (new_ctrl0 != gmac_ctrl0)
+ writel_relaxed(new_ctrl0, gmac->base + GMAC_CTRL0_REG);
+ if (new_ctrl2 != gmac_ctrl2)
+ writel_relaxed(new_ctrl2, gmac->base + GMAC_CTRL2_REG);
+ if (new_ctrl4 != gmac_ctrl4)
+ writel_relaxed(new_ctrl4, gmac->base + GMAC_CTRL4_REG);
+
+ if (gmac_ctrl2 & GMAC_CTRL2_PORT_RESET) {
+ while ((readl_relaxed(gmac->base + GMAC_CTRL2_REG) &
+ GMAC_CTRL2_PORT_RESET) != 0)
+ continue;
+ }
+}
+EXPORT_SYMBOL_GPL(mvgmac_config_mac);
+
+int mvgmac_set_lpi_ts(struct mvgmac *gmac, unsigned int ts)
+{
+ u32 val;
+
+ if (!(readl_relaxed(gmac->base + GMAC_STATUS_REG) & MVGMAC_SPEED_1000))
+ ts = DIV_ROUND_UP(ts, 10);
+
+ if (ts > 255)
+ ts = 255;
+
+ val = readl_relaxed(gmac->base + GMAC_LPI_CTRL0_REG);
+ val = insert(val, GMAC_LPI_CTRL0_TS, ts);
+ writel_relaxed(val, gmac->base + GMAC_LPI_CTRL0_REG);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mvgmac_set_lpi_ts);
+
+void mvgmac_set_eee(struct mvgmac *gmac, bool enable)
+{
+ u32 val;
+
+ val = readl_relaxed(gmac->base + GMAC_LPI_CTRL1_REG);
+ val = insert(val, GMAC_LPI_CTRL1_REQ_EN, enable);
+ writel_relaxed(val, gmac->base + GMAC_LPI_CTRL1_REG);
+}
+EXPORT_SYMBOL_GPL(mvgmac_set_eee);
+
+MODULE_DESCRIPTION("Marvell GMAC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/ethernet/marvell/mvgmac.h b/drivers/net/ethernet/marvell/mvgmac.h
new file mode 100644
index 000000000000..ceccc6777237
--- /dev/null
+++ b/drivers/net/ethernet/marvell/mvgmac.h
@@ -0,0 +1,43 @@
+#ifndef MVGMAC_H
+#define MVGMAC_H
+
+#include <linux/phy.h>
+
+struct phylink_link_state;
+
+/* The two bytes Marvell header. Either contains a special value used by
+ * Marvell switches when a specific hardware mode is enabled (not supported
+ * by this driver) or is filled automatically by zeroes on the RX side.
+ * Those two bytes being at the front of the Ethernet header, they allow
+ * to have the IP header aligned on a 4 bytes boundary automatically: the
+ * hardware skips those two bytes on its own.
+ */
+#define MARVELL_HEADER_SIZE 2
+
+struct mvgmac {
+ void __iomem *base;
+};
+
+void mvgmac_set_max_rx_size(struct mvgmac *gmac, size_t max_rx_size);
+void mvgmac_enable(struct mvgmac *gmac);
+void mvgmac_disable(struct mvgmac *gmac);
+void mvgmac_link_unforce(struct mvgmac *gmac);
+void mvgmac_link_force_down(struct mvgmac *gmac);
+void mvgmac_link_down(struct mvgmac *gmac, int mode);
+void mvgmac_link_up(struct mvgmac *gmac, int mode, int speed, int duplex,
+ bool tx_pause, bool rx_pause);
+bool mvgmac_link_is_up(struct mvgmac *gmac);
+void mvgmac_pcs_get_state(struct mvgmac *gmac,
+ struct phylink_link_state *state);
+void mvgmac_pcs_an_restart(struct mvgmac *gmac);
+int mvgmac_pcs_config(struct mvgmac *gmac, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac);
+void mvgmac_config_mac(struct mvgmac *gmac, unsigned int mode,
+ const struct phylink_link_state *state);
+
+int mvgmac_set_lpi_ts(struct mvgmac *gmac, unsigned int ts);
+void mvgmac_set_eee(struct mvgmac *gmac, bool enable);
+
+#endif
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index c9bad557f8f9..750915bb2b28 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -34,6 +34,7 @@
#include <linux/skbuff.h>
#include <net/hwbm.h>
#include "mvneta_bm.h"
+#include "mvgmac.h"
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/tso.h>
@@ -193,43 +194,7 @@
#define MVNETA_RXQ_ENABLE_MASK 0x000000ff
#define MVETH_TXQ_TOKEN_COUNT_REG(q) (0x2700 + ((q) << 4))
#define MVETH_TXQ_TOKEN_CFG_REG(q) (0x2704 + ((q) << 4))
-#define MVNETA_GMAC_CTRL_0 0x2c00
-#define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
-#define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
-#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1)
-#define MVNETA_GMAC0_PORT_ENABLE BIT(0)
-#define MVNETA_GMAC_CTRL_2 0x2c08
-#define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
-#define MVNETA_GMAC2_PCS_ENABLE BIT(3)
-#define MVNETA_GMAC2_PORT_RGMII BIT(4)
-#define MVNETA_GMAC2_PORT_RESET BIT(6)
-#define MVNETA_GMAC_STATUS 0x2c10
-#define MVNETA_GMAC_LINK_UP BIT(0)
-#define MVNETA_GMAC_SPEED_1000 BIT(1)
-#define MVNETA_GMAC_SPEED_100 BIT(2)
-#define MVNETA_GMAC_FULL_DUPLEX BIT(3)
-#define MVNETA_GMAC_RX_FLOW_CTRL_ENABLE BIT(4)
-#define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
-#define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
-#define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
-#define MVNETA_GMAC_AN_COMPLETE BIT(11)
-#define MVNETA_GMAC_SYNC_OK BIT(14)
-#define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
-#define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
-#define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
-#define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
-#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3)
-#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4)
-#define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
-#define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
-#define MVNETA_GMAC_AN_SPEED_EN BIT(7)
-#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8)
-#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9)
-#define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
-#define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
-#define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
-#define MVNETA_GMAC_CTRL_4 0x2c90
-#define MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE BIT(1)
+#define MVNETA_GMAC_BASE 0x2c00
#define MVNETA_MIB_COUNTERS_BASE 0x3000
#define MVNETA_MIB_LATE_COLLISION 0x7c
#define MVNETA_DA_FILT_SPEC_MCAST 0x3400
@@ -253,12 +218,6 @@
#define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
#define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
-#define MVNETA_LPI_CTRL_0 0x2cc0
-#define MVNETA_LPI_CTRL_1 0x2cc4
-#define MVNETA_LPI_REQUEST_ENABLE BIT(0)
-#define MVNETA_LPI_CTRL_2 0x2cc8
-#define MVNETA_LPI_STATUS 0x2ccc
-
#define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff
/* Descriptor ring Macros */
@@ -280,7 +239,7 @@
* boundary automatically: the hardware skips those two bytes on its
* own.
*/
-#define MVNETA_MH_SIZE 2
+#define MVNETA_MH_SIZE MARVELL_HEADER_SIZE
#define MVNETA_VLAN_TAG_LEN 4
@@ -502,6 +461,7 @@ struct mvneta_port {
struct phylink_pcs phylink_pcs;
struct phy *comphy;
+ struct mvgmac gmac;
struct mvneta_bm *bm_priv;
struct mvneta_bm_pool *pool_long;
struct mvneta_bm_pool *pool_short;
@@ -510,6 +470,7 @@ struct mvneta_port {
bool eee_enabled;
bool eee_active;
bool tx_lpi_enabled;
+ u32 tx_lpi_timer;
u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
@@ -892,19 +853,6 @@ mvneta_rxq_next_desc_get(struct mvneta_rx_queue *rxq)
return rxq->descs + rx_desc;
}
-/* Change maximum receive size of the port. */
-static void mvneta_max_rx_size_set(struct mvneta_port *pp, int max_rx_size)
-{
- u32 val;
-
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
- val &= ~MVNETA_GMAC_MAX_RX_SIZE_MASK;
- val |= ((max_rx_size - MVNETA_MH_SIZE) / 2) <<
- MVNETA_GMAC_MAX_RX_SIZE_SHIFT;
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
-}
-
-
/* Set rx queue offset */
static void mvneta_rxq_offset_set(struct mvneta_port *pp,
struct mvneta_rx_queue *rxq,
@@ -1312,23 +1260,13 @@ static void mvneta_port_down(struct mvneta_port *pp)
/* Enable the port by setting the port enable bit of the MAC control register */
static void mvneta_port_enable(struct mvneta_port *pp)
{
- u32 val;
-
- /* Enable port */
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
- val |= MVNETA_GMAC0_PORT_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+ mvgmac_enable(&pp->gmac);
}
/* Disable the port and wait for about 200 usec before retuning */
static void mvneta_port_disable(struct mvneta_port *pp)
{
- u32 val;
-
- /* Reset the Enable bit in the Serial Control Register */
- val = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
- val &= ~MVNETA_GMAC0_PORT_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
+ mvgmac_disable(&pp->gmac);
udelay(200);
}
@@ -3129,9 +3067,9 @@ static irqreturn_t mvneta_percpu_isr(int irq, void *dev_id)
static void mvneta_link_change(struct mvneta_port *pp)
{
- u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
+ bool link_is_up = mvgmac_link_is_up(&pp->gmac);
- phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP));
+ phylink_mac_change(pp->phylink, link_is_up);
}
/* NAPI handler
@@ -3623,7 +3561,7 @@ static void mvneta_start_dev(struct mvneta_port *pp)
WARN_ON(mvneta_config_interface(pp, pp->phy_interface));
- mvneta_max_rx_size_set(pp, pp->pkt_size);
+ mvgmac_set_max_rx_size(&pp->gmac, pp->pkt_size);
mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
/* start the Rx/Tx activity */
@@ -3834,27 +3772,8 @@ static void mvneta_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
- u32 gmac_stat;
-
- gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
- state->speed =
- state->interface == PHY_INTERFACE_MODE_2500BASEX ?
- SPEED_2500 : SPEED_1000;
- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
- state->speed = SPEED_100;
- else
- state->speed = SPEED_10;
-
- state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
- state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
- state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
-
- if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
- state->pause |= MLO_PAUSE_RX;
- if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
- state->pause |= MLO_PAUSE_TX;
+ mvgmac_pcs_get_state(&pp->gmac, state);
}
static int mvneta_pcs_config(struct phylink_pcs *pcs,
@@ -3863,65 +3782,19 @@ static int mvneta_pcs_config(struct phylink_pcs *pcs,
bool permit_pause_to_mac)
{
struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
- u32 mask, val, an, old_an, changed;
- mask = MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_INBAND_RESTART_AN |
- MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_FLOW_CTRL_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
+ /* We should never see Asym_Pause set */
+ WARN_ON(phylink_test(advertising, Asym_Pause));
- if (phylink_autoneg_inband(mode)) {
- mask |= MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX;
- val = MVNETA_GMAC_INBAND_AN_ENABLE;
-
- if (state->interface == PHY_INTERFACE_MODE_SGMII) {
- /* SGMII mode receives the speed and duplex from PHY */
- val |= MVNETA_GMAC_AN_SPEED_EN |
- MVNETA_GMAC_AN_DUPLEX_EN;
- } else {
- /* 802.3z mode has fixed speed and duplex */
- val |= MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
- /* The FLOW_CTRL_EN bit selects either the hardware
- * automatically or the CONFIG_FLOW_CTRL manually
- * controls the GMAC pause mode.
- */
- if (permit_pause_to_mac)
- val |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
-
- /* Update the advertisement bits */
- mask |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
- if (phylink_test(advertising, Pause))
- val |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
- }
- } else {
- /* Phy or fixed speed - disable in-band AN modes */
- val = 0;
- }
-
- old_an = an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- an = (an & ~mask) | val;
- changed = old_an ^ an;
- if (changed)
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, an);
-
- /* We are only interested in the advertisement bits changing */
- return !!(changed & MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL);
+ return mvgmac_pcs_config(&pp->gmac, mode, interface, advertising,
+ permit_pause_to_mac);
}
static void mvneta_pcs_an_restart(struct phylink_pcs *pcs)
{
struct mvneta_port *pp = mvneta_pcs_to_port(pcs);
- u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
- gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
+ mvgmac_pcs_an_restart(&pp->gmac);
}
static const struct phylink_pcs_ops mvneta_phylink_pcs_ops = {
@@ -3989,7 +3862,6 @@ static int mvneta_mac_prepare(struct phylink_config *config, unsigned int mode,
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 val;
if (pp->phy_interface != interface ||
phylink_autoneg_inband(mode)) {
@@ -3998,10 +3870,7 @@ static int mvneta_mac_prepare(struct phylink_config *config, unsigned int mode,
* can only change the port mode and in-band enable when the
* link is down.
*/
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
- val |= MVNETA_GMAC_FORCE_LINK_DOWN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
+ mvgmac_link_force_down(&pp->gmac);
}
if (pp->phy_interface != interface)
@@ -4023,55 +3892,8 @@ static void mvneta_mac_config(struct phylink_config *config, unsigned int mode,
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
- u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
- u32 new_ctrl4, gmac_ctrl4 = mvreg_read(pp, MVNETA_GMAC_CTRL_4);
-
- new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
- new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
- MVNETA_GMAC2_PORT_RESET);
- new_ctrl4 = gmac_ctrl4 & ~(MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE);
-
- /* Even though it might look weird, when we're configured in
- * SGMII or QSGMII mode, the RGMII bit needs to be set.
- */
- new_ctrl2 |= MVNETA_GMAC2_PORT_RGMII;
-
- if (state->interface == PHY_INTERFACE_MODE_QSGMII ||
- state->interface == PHY_INTERFACE_MODE_SGMII ||
- phy_interface_mode_is_8023z(state->interface))
- new_ctrl2 |= MVNETA_GMAC2_PCS_ENABLE;
- if (!phylink_autoneg_inband(mode)) {
- /* Phy or fixed speed - nothing to do, leave the
- * configured speed, duplex and flow control as-is.
- */
- } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
- /* SGMII mode receives the state from the PHY */
- new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
- } else {
- /* 802.3z negotiation - only 1000base-X */
- new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
- }
-
- /* When at 2.5G, the link partner can send frames with shortened
- * preambles.
- */
- if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
- new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
-
- if (new_ctrl0 != gmac_ctrl0)
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
- if (new_ctrl2 != gmac_ctrl2)
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
- if (new_ctrl4 != gmac_ctrl4)
- mvreg_write(pp, MVNETA_GMAC_CTRL_4, new_ctrl4);
-
- if (gmac_ctrl2 & MVNETA_GMAC2_PORT_RESET) {
- while ((mvreg_read(pp, MVNETA_GMAC_CTRL_2) &
- MVNETA_GMAC2_PORT_RESET) != 0)
- continue;
- }
+ mvgmac_config_mac(&pp->gmac, mode, state);
}
static int mvneta_mac_finish(struct phylink_config *config, unsigned int mode,
@@ -4079,7 +3901,7 @@ static int mvneta_mac_finish(struct phylink_config *config, unsigned int mode,
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 val, clk;
+ u32 clk;
/* Disable 1ms clock if not in in-band mode */
if (!phylink_autoneg_inband(mode)) {
@@ -4095,45 +3917,23 @@ static int mvneta_mac_finish(struct phylink_config *config, unsigned int mode,
/* Allow the link to come up if in in-band mode, otherwise the
* link is forced via mac_link_down()/mac_link_up()
*/
- if (phylink_autoneg_inband(mode)) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
+ if (phylink_autoneg_inband(mode))
+ mvgmac_link_unforce(&pp->gmac);
return 0;
}
-static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
-{
- u32 lpi_ctl1;
-
- lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1);
- if (enable)
- lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE;
- else
- lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE;
- mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
-}
-
static void mvneta_mac_link_down(struct phylink_config *config,
unsigned int mode, phy_interface_t interface)
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 val;
mvneta_port_down(pp);
-
- if (!phylink_autoneg_inband(mode)) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
- val |= MVNETA_GMAC_FORCE_LINK_DOWN;
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
+ mvgmac_link_down(&pp->gmac, mode);
pp->eee_active = false;
- mvneta_set_eee(pp, false);
+ mvgmac_set_eee(&pp->gmac, false);
}
static void mvneta_mac_link_up(struct phylink_config *config,
@@ -4144,48 +3944,14 @@ static void mvneta_mac_link_up(struct phylink_config *config,
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
- u32 val;
-
- if (!phylink_autoneg_inband(mode)) {
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~(MVNETA_GMAC_FORCE_LINK_DOWN |
- MVNETA_GMAC_CONFIG_MII_SPEED |
- MVNETA_GMAC_CONFIG_GMII_SPEED |
- MVNETA_GMAC_CONFIG_FLOW_CTRL |
- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
- val |= MVNETA_GMAC_FORCE_LINK_PASS;
-
- if (speed == SPEED_1000 || speed == SPEED_2500)
- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else if (speed == SPEED_100)
- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
-
- if (duplex == DUPLEX_FULL)
- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
- if (tx_pause || rx_pause)
- val |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
-
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- } else {
- /* When inband doesn't cover flow control or flow control is
- * disabled, we need to manually configure it. This bit will
- * only have effect if MVNETA_GMAC_AN_FLOW_CTRL_EN is unset.
- */
- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
- val &= ~MVNETA_GMAC_CONFIG_FLOW_CTRL;
-
- if (tx_pause || rx_pause)
- val |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
-
- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
+ mvgmac_link_up(&pp->gmac, mode, speed, duplex, tx_pause, rx_pause);
mvneta_port_up(pp);
if (phy && pp->eee_enabled) {
pp->eee_active = phy_init_eee(phy, 0) >= 0;
- mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
+ mvgmac_set_lpi_ts(&pp->gmac, pp->tx_lpi_timer);
+ mvgmac_set_eee(&pp->gmac, pp->eee_active && pp->tx_lpi_enabled);
}
}
@@ -4957,14 +4723,11 @@ static int mvneta_ethtool_get_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
struct mvneta_port *pp = netdev_priv(dev);
- u32 lpi_ctl0;
-
- lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
eee->eee_enabled = pp->eee_enabled;
eee->eee_active = pp->eee_active;
eee->tx_lpi_enabled = pp->tx_lpi_enabled;
- eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale;
+ eee->tx_lpi_timer = pp->tx_lpi_timer;
return phylink_ethtool_get_eee(pp->phylink, eee);
}
@@ -4973,7 +4736,6 @@ static int mvneta_ethtool_set_eee(struct net_device *dev,
struct ethtool_eee *eee)
{
struct mvneta_port *pp = netdev_priv(dev);
- u32 lpi_ctl0;
/* The Armada 37x documents do not give limits for this other than
* it being an 8-bit register.
@@ -4981,15 +4743,13 @@ static int mvneta_ethtool_set_eee(struct net_device *dev,
if (eee->tx_lpi_enabled && eee->tx_lpi_timer > 255)
return -EINVAL;
- lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
- lpi_ctl0 &= ~(0xff << 8);
- lpi_ctl0 |= eee->tx_lpi_timer << 8;
- mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0);
-
pp->eee_enabled = eee->eee_enabled;
pp->tx_lpi_enabled = eee->tx_lpi_enabled;
+ pp->tx_lpi_timer = eee->tx_lpi_timer;
- mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled);
+ mvgmac_set_eee(&pp->gmac, false);
+ mvgmac_set_lpi_ts(&pp->gmac, eee->tx_lpi_timer);
+ mvgmac_set_eee(&pp->gmac, pp->eee_active && pp->tx_lpi_enabled);
return phylink_ethtool_set_eee(pp->phylink, eee);
}
@@ -5311,6 +5071,9 @@ static int mvneta_probe(struct platform_device *pdev)
goto err_clk;
}
+ pp->gmac.base = pp->base + MVNETA_GMAC_BASE;
+ pp->tx_lpi_timer = 16;
+
/* Alloc per-cpu port structure */
pp->ports = alloc_percpu(struct mvneta_pcpu_port);
if (!pp->ports) {
--
cgit v1.2.3
From d4888ddce77f3cc2717dcf0f69e07514313b3ac3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Fri, 23 Dec 2016 01:09:44 +0000
Subject: net: mvgmac: support different hw versions
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvgmac.c | 108 ++++++++++++++++++++++++++++++----
drivers/net/ethernet/marvell/mvgmac.h | 9 +++
drivers/net/ethernet/marvell/mvneta.c | 1 +
3 files changed, 108 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvgmac.c b/drivers/net/ethernet/marvell/mvgmac.c
index 6c0b7c5c0b24..e776d4e85d3f 100644
--- a/drivers/net/ethernet/marvell/mvgmac.c
+++ b/drivers/net/ethernet/marvell/mvgmac.c
@@ -19,6 +19,8 @@
#include "mvgmac.h"
enum {
+ /* N = Neta, 21 = PPV2.1, 22 = PPV2.2 */
+ /* N: 0-14 21: 0,2-15 22: 0-14 */
GMAC_CTRL0_REG = 0x00,
GMAC_CTRL0_PORT_ENABLE = BIT(0),
GMAC_CTRL0_PORT_1000BASE_X = BIT(1),
@@ -26,12 +28,21 @@ enum {
GMAC_CTRL0_MAX_RX_SIZE_MASK = 0x1fff << GMAC_CTRL0_MAX_RX_SIZE_SHIFT,
GMAC_CTRL0_MIB_CNTR_ENABLE = BIT(15),
+ /* N: 21: 1,5,6 22: */
+ GMAC_CTRL1_REG = 0x04,
+ GMAC_CTRL1_PERIODIC_XON_ENABLE = BIT(1),
+ GMAC_CTRL1_GMII_LB_ENABLE = BIT(5),
+ GMAC_CTRL1_PCS_LB_ENABLE = BIT(6),
+
+ /* ALL: 0,3,4,6 */
GMAC_CTRL2_REG = 0x08,
GMAC_CTRL2_INBAND_AN_SGMII = BIT(0),
GMAC_CTRL2_PCS_ENABLE = BIT(3),
GMAC_CTRL2_PORT_RGMII = BIT(4),
GMAC_CTRL2_PORT_RESET = BIT(6),
+ /* N:0-9,11-13 21:0,1,5-7,9,12,13 22:0-7,9-15 */
+ /* 22 bit 2 - EN_PCS_AN */
GMAC_ANEG_REG = 0x0c,
GMAC_ANEG_FORCE_LINK_DOWN = BIT(0),
GMAC_ANEG_FORCE_LINK_PASS = BIT(1),
@@ -43,9 +54,12 @@ enum {
GMAC_ANEG_AN_SPEED_ENABLE = BIT(7),
GMAC_ANEG_CONFIG_FLOW_CTRL = BIT(8),
GMAC_ANEG_ADVERT_SYM_FLOW_CTRL = BIT(9),
+ GMAC_ANEG_ADVERT_ASYM_FLOW_CTRL = BIT(10),
GMAC_ANEG_AN_FLOW_CTRL_ENABLE = BIT(11),
GMAC_ANEG_FULL_DUPLEX = BIT(12),
GMAC_ANEG_AN_DUPLEX_ENABLE = BIT(13),
+ /* pp22: bit 14 - phy mode */
+ /* pp22: bit 15 - choose sample tx config */
GMAC_STATUS_REG = 0x10,
MVGMAC_LINK_UP = BIT(0),
@@ -59,8 +73,21 @@ enum {
MVGMAC_AN_COMPLETE = BIT(11),
MVGMAC_SYNC_OK = BIT(14),
+ /* N: 21:6-13 22: */
+ GMAC_FIFO_CFG1_REG = 0x1c,
+ GMAC_FIFO_CFG1_TX_MIN_TH_SHIFT = 6,
+ GMAC_FIFO_CFG1_TX_MIN_TH_MASK = 0x7f <<
+ GMAC_FIFO_CFG1_TX_MIN_TH_SHIFT,
+
+ /* N:1 21: 22:0,3-7 */
GMAC_CTRL4_REG = 0x90,
+ GMAC_CTRL4_EXT_PIN_GMII_SEL = BIT(0),
GMAC_CTRL4_SHORT_PREAMBLE_ENABLE = BIT(1),
+ GMAC_CTRL4_FC_RX_ENABLE = BIT(3),
+ GMAC_CTRL4_FC_TX_ENABLE = BIT(4),
+ GMAC_CTRL4_DP_CLK_SEL = BIT(5),
+ GMAC_CTRL4_SYNC_BYPASS = BIT(6),
+ GMAC_CTRL4_QSGMII_BYPASS = BIT(7),
GMAC_LPI_CTRL0_REG = 0xc0,
GMAC_LPI_CTRL0_TS = 0xff << 8,
@@ -111,6 +138,47 @@ void mvgmac_disable(struct mvgmac *gmac)
}
EXPORT_SYMBOL_GPL(mvgmac_disable);
+int mvgmac_configure(struct mvgmac *gmac, phy_interface_t phy_mode)
+{
+ bool ext_pin_gmii;
+ u32 val;
+
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_QSGMII:
+ case PHY_INTERFACE_MODE_SGMII:
+ ext_pin_gmii = false;
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ ext_pin_gmii = true;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (gmac->version == MVGMAC_PP21) {
+ /* Min. TX threshold must be less than minimum packet length */
+ val = readl_relaxed(gmac->base + GMAC_FIFO_CFG1_REG);
+ val = insert(val, GMAC_FIFO_CFG1_TX_MIN_TH_MASK, 64 - 4 - 2);
+ writel_relaxed(val, gmac->base + GMAC_FIFO_CFG1_REG);
+ } else if (gmac->version == MVGMAC_PP22) {
+ val = readl_relaxed(gmac->base + GMAC_CTRL4_REG);
+ val &= ~GMAC_CTRL4_DP_CLK_SEL;
+ val |= GMAC_CTRL4_SYNC_BYPASS;
+ val = insert(val, GMAC_CTRL4_QSGMII_BYPASS,
+ phy_mode != PHY_INTERFACE_MODE_QSGMII);
+ val = insert(val, GMAC_CTRL4_EXT_PIN_GMII_SEL, ext_pin_gmii);
+ writel_relaxed(val, gmac->base + GMAC_CTRL4_REG);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mvgmac_configure);
+
void mvgmac_link_unforce(struct mvgmac *gmac)
{
u32 val;
@@ -142,7 +210,7 @@ EXPORT_SYMBOL_GPL(mvgmac_link_down);
void mvgmac_link_up(struct mvgmac *gmac, int mode, int speed, int duplex,
bool tx_pause, bool rx_pause)
{
- u32 val;
+ u32 val, ctrl4;
val = readl_relaxed(gmac->base + GMAC_ANEG_REG);
val &= ~GMAC_ANEG_CONFIG_FLOW_CTRL;
@@ -163,8 +231,19 @@ void mvgmac_link_up(struct mvgmac *gmac, int mode, int speed, int duplex,
val |= GMAC_ANEG_FULL_DUPLEX;
}
- if (tx_pause || rx_pause)
- val |= GMAC_ANEG_CONFIG_FLOW_CTRL;
+ switch (gmac->version) {
+ case MVGMAC_NETA:
+ val = insert(val, GMAC_ANEG_CONFIG_FLOW_CTRL,
+ tx_pause || rx_pause);
+ break;
+
+ case MVGMAC_PP22:
+ ctrl4 = readl_relaxed(gmac->base + GMAC_CTRL4_REG);
+ ctrl4 = insert(ctrl4, GMAC_CTRL4_FC_TX_ENABLE, tx_pause);
+ ctrl4 = insert(ctrl4, GMAC_CTRL4_FC_RX_ENABLE, rx_pause);
+ writel_relaxed(ctrl4, gmac->base + GMAC_CTRL4_REG);
+ break;
+ }
writel_relaxed(val, gmac->base + GMAC_ANEG_REG);
}
@@ -252,6 +331,11 @@ int mvgmac_pcs_config(struct mvgmac *gmac, unsigned int mode,
mask |= GMAC_ANEG_ADVERT_SYM_FLOW_CTRL;
if (phylink_test(advertising, Pause))
val |= GMAC_ANEG_ADVERT_SYM_FLOW_CTRL;
+ if (gmac->version == MVGMAC_PP22) {
+ mask |= GMAC_ANEG_ADVERT_ASYM_FLOW_CTRL;
+ if (phylink_test(advertising, Asym_Pause))
+ val |= GMAC_ANEG_ADVERT_ASYM_FLOW_CTRL;
+ }
}
} else {
/* Phy or fixed speed - disable in-band AN modes */
@@ -265,7 +349,8 @@ int mvgmac_pcs_config(struct mvgmac *gmac, unsigned int mode,
writel_relaxed(an, gmac->base + GMAC_ANEG_REG);
/* We are only interested in the advertisement bits changing */
- return !!(changed & GMAC_ANEG_ADVERT_SYM_FLOW_CTRL);
+ return !!(changed & (GMAC_ANEG_ADVERT_SYM_FLOW_CTRL |
+ GMAC_ANEG_ADVERT_ASYM_FLOW_CTRL));
}
EXPORT_SYMBOL_GPL(mvgmac_pcs_config);
@@ -279,7 +364,7 @@ void mvgmac_config_mac(struct mvgmac *gmac, unsigned int mode,
new_ctrl0 = gmac_ctrl0 & ~GMAC_CTRL0_PORT_1000BASE_X;
new_ctrl2 = gmac_ctrl2 & ~(GMAC_CTRL2_INBAND_AN_SGMII |
GMAC_CTRL2_PORT_RESET);
- new_ctrl4 = gmac_ctrl4 & ~GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+ new_ctrl4 = gmac_ctrl4;
/* Even though it might look weird, when we're configured in
* SGMII or QSGMII mode, the RGMII bit needs to be set.
@@ -303,11 +388,14 @@ void mvgmac_config_mac(struct mvgmac *gmac, unsigned int mode,
new_ctrl0 |= GMAC_CTRL0_PORT_1000BASE_X;
}
- /* When at 2.5G, the link partner can send frames with shortened
- * preambles.
- */
- if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
- new_ctrl4 |= GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+ if (gmac->version == MVGMAC_NETA) {
+ /* When at 2.5G, the link partner can send frames with
+ * shortened preambles.
+ */
+ new_ctrl4 &= ~GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+ if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
+ new_ctrl4 |= GMAC_CTRL4_SHORT_PREAMBLE_ENABLE;
+ }
if (new_ctrl0 != gmac_ctrl0)
writel_relaxed(new_ctrl0, gmac->base + GMAC_CTRL0_REG);
diff --git a/drivers/net/ethernet/marvell/mvgmac.h b/drivers/net/ethernet/marvell/mvgmac.h
index ceccc6777237..f4111fba7258 100644
--- a/drivers/net/ethernet/marvell/mvgmac.h
+++ b/drivers/net/ethernet/marvell/mvgmac.h
@@ -14,13 +14,22 @@ struct phylink_link_state;
*/
#define MARVELL_HEADER_SIZE 2
+enum {
+ /* GMAC version */
+ MVGMAC_NETA,
+ MVGMAC_PP21,
+ MVGMAC_PP22,
+};
+
struct mvgmac {
void __iomem *base;
+ unsigned int version;
};
void mvgmac_set_max_rx_size(struct mvgmac *gmac, size_t max_rx_size);
void mvgmac_enable(struct mvgmac *gmac);
void mvgmac_disable(struct mvgmac *gmac);
+int mvgmac_configure(struct mvgmac *gmac, phy_interface_t phy_mode);
void mvgmac_link_unforce(struct mvgmac *gmac);
void mvgmac_link_force_down(struct mvgmac *gmac);
void mvgmac_link_down(struct mvgmac *gmac, int mode);
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 750915bb2b28..968005a27553 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -5072,6 +5072,7 @@ static int mvneta_probe(struct platform_device *pdev)
}
pp->gmac.base = pp->base + MVNETA_GMAC_BASE;
+ pp->gmac.version = MVGMAC_NETA;
pp->tx_lpi_timer = 16;
/* Alloc per-cpu port structure */
--
cgit v1.2.3
From 9092b4d7a5b31489cabf279759771ad85e450a2d Mon Sep 17 00:00:00 2001
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Date: Thu, 1 Jul 2021 17:10:11 +0100
Subject: net: mvneta: deny disabling autoneg for 802.3z modes
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
The documentation for Armada 38x says:
Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
When <PortType> = 1 (1000BASE-X) this field must be set to 1.
We presently ignore whether userspace requests autonegotiation or not
through the ethtool ksettings interface. However, we have some network
interfaces that wish to do this. To offer a consistent API across
network interfaces, deny the ability to disable autonegotiation on
mvneta hardware when in 1000BASE-X and 2500BASE-X.
This means the only way to switch between 2500BASE-X and 1000BASE-X
on SFPs that support this will be:
# ethtool -s ethX advertise 0x20000002000 # 1000BASE-X Pause
# ethtool -s ethX advertise 0xa000 # 2500BASE-X Pause
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Marek Behún <kabel@kernel.org>
---
drivers/net/ethernet/marvell/mvneta.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 968005a27553..0703c2e796a6 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3811,12 +3811,20 @@ static void mvneta_validate(struct phylink_config *config,
struct mvneta_port *pp = netdev_priv(ndev);
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_QSGMII &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
- !phy_interface_mode_is_8023z(state->interface) &&
- !phy_interface_mode_is_rgmii(state->interface)) {
+ /* We only support QSGMII, SGMII, 802.3z and RGMII modes.
+ * When in 802.3z mode, we must have AN enabled:
+ * "Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
+ * When <PortType> = 1 (1000BASE-X) this field must be set to 1."
+ */
+ if (phy_interface_mode_is_8023z(state->interface)) {
+ if (!phylink_test(state->advertising, Autoneg)) {
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ return;
+ }
+ } else if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_QSGMII &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ !phy_interface_mode_is_rgmii(state->interface)) {
bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
return;
}
--
cgit v1.2.3
Reference in New Issue Copy Permalink