72 lines
1.9 KiB
Diff
72 lines
1.9 KiB
Diff
|
From 4f6975a334c979d5dc27b0b7dbcf2eee947c9f06 Mon Sep 17 00:00:00 2001
|
||
|
|
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
|
||
|
|
Date: Thu, 30 Mar 2017 13:01:10 +0200
|
||
|
|
Subject: [PATCH 006/389] arm64: dts: sun50i-h5-orangepi-pc2: Add CPUX
|
||
|
|
regulator, enable cpufreq
|
||
|
|
|
||
|
|
Orange Pi PC2 features sy8106a regulator just like Orange Pi PC.
|
||
|
|
|
||
|
|
Signed-off-by: Ondrej Jirman <megi@xff.cz>
|
||
|
|
---
|
||
|
|
.../dts/allwinner/sun50i-h5-orangepi-pc2.dts | 30 +++++++++++++++++++
|
||
|
|
1 file changed, 30 insertions(+)
|
||
|
|
|
||
|
|
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
|
||
|
|
index b5c1ff19b4c4..2d041f962681 100644
|
||
|
|
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
|
||
|
|
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
|
||
|
|
@@ -3,6 +3,7 @@
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
#include "sun50i-h5.dtsi"
|
||
|
|
+#include "sun50i-h5-cpu-opp.dtsi"
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
@@ -86,6 +87,10 @@ reg_usb0_vbus: usb0-vbus {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+&cpu0 {
|
||
|
|
+ cpu-supply = <®_vdd_cpux>;
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&codec {
|
||
|
|
allwinner,audio-routing =
|
||
|
|
"Line Out", "LINEOUT",
|
||
|
|
@@ -201,6 +206,31 @@ flash@0 {
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
+&r_i2c {
|
||
|
|
+ status = "okay";
|
||
|
|
+
|
||
|
|
+ reg_vdd_cpux: regulator@65 {
|
||
|
|
+ compatible = "silergy,sy8106a";
|
||
|
|
+ reg = <0x65>;
|
||
|
|
+ regulator-name = "vdd-cpux";
|
||
|
|
+ silergy,fixed-microvolt = <1200000>;
|
||
|
|
+ /*
|
||
|
|
+ * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
|
||
|
|
+ * however both the Armbian DVFS table and the official one
|
||
|
|
+ * have operating points with voltage under 1.1V, and both
|
||
|
|
+ * DVFS table are known to work properly at the lowest
|
||
|
|
+ * operating point.
|
||
|
|
+ *
|
||
|
|
+ * Use 1.0V as the minimum voltage instead.
|
||
|
|
+ */
|
||
|
|
+ regulator-min-microvolt = <1000000>;
|
||
|
|
+ regulator-max-microvolt = <1400000>;
|
||
|
|
+ regulator-ramp-delay = <200>;
|
||
|
|
+ regulator-boot-on;
|
||
|
|
+ regulator-always-on;
|
||
|
|
+ };
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
&uart0 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart0_pa_pins>;
|
||
|
|
--
|
||
|
|
2.35.3
|
||
|
|
|