build/patch/kernel/archive/sunxi-6.5/patches.megous/arm64-dts-rk3566-pinetab2-Fixup-wifi-DT-description.patch

140 lines
4.0 KiB
Diff
Raw Normal View History

From c818b92a4c00b7540cb24b696c38ac405b896998 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megi@xff.cz>
Date: Sat, 29 Jul 2023 22:09:14 +0200
Subject: [PATCH 401/464] arm64: dts: rk3566-pinetab2: Fixup wifi DT
description
- To enable power, 3 regulators need to be enabled in sequence.
- Add wakeup gpios.
- Reset signal is not connected on board, no need to use it.
Signed-of-by: Ondrej Jirman <megi@xff.cz>
---
.../dts/rockchip/rk3566-pinetab2-v0.1.dts | 2 +-
.../dts/rockchip/rk3566-pinetab2-v2.0.dts | 2 +-
.../boot/dts/rockchip/rk3566-pinetab2.dtsi | 48 +++++++++++++++----
3 files changed, 40 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v0.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v0.1.dts
index ba244545ba26..7dc17a241b2e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v0.1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v0.1.dts
@@ -21,6 +21,6 @@ lcd0_rst_l: lcd0-rst-l {
};
};
-&vcc_wl {
+&w_vbat {
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v2.0.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v2.0.dts
index 79f672123b7f..44f5f2812a7f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v2.0.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2-v2.0.dts
@@ -41,6 +41,6 @@ hall_int_l: hall-int-l {
};
};
-&vcc_wl {
+&w_vbat {
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
index 1ba6e610767a..349071581962 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinetab2.dtsi
@@ -13,6 +13,7 @@ / {
chassis-type = "tablet";
aliases {
+ ethernet0 = &bes2600;
mmc0 = &sdmmc0;
mmc1 = &sdhci;
};
@@ -152,9 +153,6 @@ sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk817 1>;
clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_reset>;
- reset-gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>;
post-power-on-delay-ms = <200>;
};
@@ -259,18 +257,37 @@ vcc_sys: vcc_sys {
vin-supply = <&vcc_bat>;
};
- vcc_wl: vcc_wl {
+ w_vbat: w-vbat-regulator {
compatible = "regulator-fixed";
+ enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwren>;
- regulator-name = "vcc_wl";
+ regulator-name = "w_vbat";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
+ vin-supply = <&vcc_sys>;
+ };
- regulator-state-mem {
- regulator-off-in-suspend;
- };
+ wl_reg: wl-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_reg_on_h>;
+ regulator-name = "wl_reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&w_vbat>;
+ };
+
+ wl_reg2: wl2-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>;
+ regulator-name = "wl_reg2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&wl_reg>;
};
vdd1v2_dvp: vdd1v2_dvp {
@@ -854,6 +871,10 @@ wifi_reset: wifi-reset {
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ wifi_pwrkey: wifi-pwrkey {
+ rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
wifi_wake_host_h: wifi-wake-host-h {
rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
};
@@ -928,9 +949,16 @@ &sdmmc1 {
&sdmmc1_cmd
&sdmmc1_clk>;
sd-uhs-sdr104;
- vmmc-supply = <&vcc_wl>;
+ vmmc-supply = <&wl_reg2>;
vqmmc-supply = <&vcca1v8_pmu>;
status = "okay";
+
+ bes2600: wifi {
+ compatible = "bestechnic,bes2600";
+
+ device-wakeup-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; // wifi chip wakeup
+ host-wakeup-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; // host wakeup
+ };
};
&sfc {
--
2.34.1