build/patch/kernel/archive/sunxi-6.5/patches.megous/hm5065-yaml-bindings-wip.patch

From 158fbf2449a6fcebf8378794686cbd4be590a69c Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
Date: Mon, 20 May 2019 17:58:05 +0200
Subject: [PATCH 034/464] hm5065: yaml bindings (wip)

---
 .../devicetree/bindings/media/i2c/hm5065.yaml | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/hm5065.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/hm5065.yaml b/Documentation/devicetree/bindings/media/i2c/hm5065.yaml
new file mode 100644
index 000000000000..df7a4f514b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hm5065.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hm5065.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HM5065 CSI camera sensor
+
+description: |+
+  At least one of reset-gpios and enable-gpios must be configured.
+
+  The device node must contain one 'port' child node for its digital output
+  video port, in accordance with the video interface bindings defined in
+  
+  Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+maintainers:
+  - Ondrej Jirman <megi@xff.cz>
+
+properties:
+  compatible:
+    const: himax,hm5065
+
+  reg:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: reference to the GPIO connected to the reset pin, if any. This is an active low signal to the HM5065.
+
+  enable-gpios:
+    maxItems: 1
+    description: reference to the GPIO connected to the CE pin, if any. This is an active high signal to the HM5065.
+
+  IOVDD-supply:
+    description: Digital I/O voltage supply, 2.8 volts
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8 volts
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.8 volts
+
+  AFVDD-supply:
+    description: Auto focus voltage supply, 2.8 volts
+
+  clocks:
+    minItems: 1
+    maxItems: 1
+    description: reference to the external input clock for the sensor.
+
+- clock-names: should be "xclk".
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - IOVDD-supply
+  - AVDD-supply
+  - DVDD-supply
+  - AFVDD-supply
+
+Example:
+
+&i2c1 {
+	hm5065: camera@1f {
+		compatible = "himax,hm5065";
+		reg = <0x1f>;
+		clocks = <&ccu CLK_CSI_MCLK>;
+		clock-names = "xclk";
+		IOVDD-supply = <&reg_dldo3>;
+		AVDD-supply = <&reg_dldo4>;
+		DVDD-supply = <&reg_eldo3>;
+		AFVDD-supply = <&reg_dldo3>;
+		reset-gpios = <&pio 4 18 GPIO_ACTIVE_LOW>; /* PE18 */
+		enable-gpios = <&pio 4 19 GPIO_ACTIVE_HIGH>; /* PE19 */
+
+		port {
+			hm5065_ep: endpoint {
+				remote-endpoint = <&csi0_hm5065_ep>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+				pclk-sample = <1>;
+			};
+		};
+	};
+};
-- 
2.34.1