添加构建Allwinner H616四核2GB RAM SoC WiFi（蓝莓）
This commit is contained in:
root
736
patch/kernel/archive/rockchip64-6.5/dt/rk3318-box.dts
Normal file
736
patch/kernel/archive/rockchip64-6.5/dt/rk3318-box.dts
Normal file
@@ -0,0 +1,736 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2020 Paolo Sabatino
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "dt-bindings/pwm/pwm.h"
|
||||
#include "dt-bindings/input/input.h"
|
||||
#include "rk3328.dtsi"
|
||||
#include "rk3318-dram-default-timing.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3318 BOX";
|
||||
compatible = "rockchip,rk3318-box", "rockchip,rk3328-box", "rockchip,rk3328";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc;
|
||||
mmc1 = &sdio;
|
||||
mmc2 = &emmc;
|
||||
mmc3 = &sdmmc_ext;
|
||||
mmc4 = &sdio_ext;
|
||||
};
|
||||
|
||||
/delete-node/ opp-table-0;
|
||||
/delete-node/ gpu-opp-table;
|
||||
|
||||
cpu0_opp_table: opp_table0 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp-600000000 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <950000>;
|
||||
clock-latency-ns = <40000>;
|
||||
opp-suspend;
|
||||
};
|
||||
opp-816000000 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <1000000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp-1008000000 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <1100000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp-1200000000 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <1200000>;
|
||||
clock-latency-ns = <40000>;
|
||||
status = "disabled";
|
||||
};
|
||||
opp-1296000000 {
|
||||
opp-hz = /bits/ 64 <1296000000>;
|
||||
opp-microvolt = <1275000>;
|
||||
clock-latency-ns = <40000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
gpu_opp_table: gpu-opp-table {
|
||||
compatible = "operating-points-v2";
|
||||
|
||||
opp-200000000 {
|
||||
opp-hz = /bits/ 64 <200000000>;
|
||||
opp-microvolt = <1000000 950000 1200000>;
|
||||
};
|
||||
|
||||
opp-300000000 {
|
||||
opp-hz = /bits/ 64 <300000000>;
|
||||
opp-microvolt = <1050000 950000 1200000>;
|
||||
};
|
||||
|
||||
opp-400000000 {
|
||||
opp-hz = /bits/ 64 <400000000>;
|
||||
opp-microvolt = <1050000 950000 1200000>;
|
||||
};
|
||||
|
||||
opp-500000000 {
|
||||
opp-hz = /bits/ 64 <500000000>;
|
||||
opp-microvolt = <1100000 950000 1200000>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
adc_keys: adc-keys {
|
||||
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
recovery {
|
||||
label = "recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <17000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
xin32k: xin32k {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
gmac_clkin: gmac-clkin {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "gmac_clkin";
|
||||
#clock-cells = <0x00>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <0x01>;
|
||||
#size-cells = <0x00>;
|
||||
|
||||
vcc_18: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_io: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_sd: sdmmc-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0m1_pin>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
/*
|
||||
* USB3 vbus
|
||||
*/
|
||||
vcc_host_vbus: vcc-host-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb30_host_drv>;
|
||||
regulator-name = "vcc_host_vbus";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
/*
|
||||
* USB2 OTG vbus
|
||||
*/
|
||||
vcc_otg_vbus: vcc-otg-vbus {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb20_host_drv>;
|
||||
regulator-name = "vcc_otg_vbus";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vdd_arm: vdd-arm {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm0 0 5000 PWM_POLARITY_INVERTED>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vdd_logic: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
|
||||
pwm-supply = <&vcc_sys>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-settling-time-up-us = <250>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio_led: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&working_led>;
|
||||
|
||||
working {
|
||||
gpios = <&gpio2 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "timer";
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
ir-receiver {
|
||||
compatible = "gpio-ir-receiver";
|
||||
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&ir_int>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/*
|
||||
wireless-bluetooth {
|
||||
compatible = "bluetooth-platdata";
|
||||
uart_rts_gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default", "rts_gpio";
|
||||
pinctrl-0 = <&uart0_rts>;
|
||||
pinctrl-1 = <&uart0_rts_gpio>;
|
||||
BT,power_gpio = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
BT,wake_host_irq = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
compatible = "wlan-platdata";
|
||||
rockchip,grf = <&grf>;
|
||||
wifi_chip_type = "ap6330";
|
||||
sdio_vref = <1800>;
|
||||
WIFI,host_wake_irq = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
*/
|
||||
|
||||
fd628_dev {
|
||||
compatible = "fd628_dev";
|
||||
fd628_gpio_clk = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
fd628_gpio_dat = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
analog-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "ANALOG";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&codec>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <128>;
|
||||
simple-audio-card,name = "HDMI";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* This node is a duplicate of sdmmc_ext: most common board do not use sdmmc_ext
|
||||
* controller, so it is left unused. Some other boards use it as sdio controller
|
||||
* for wifi and some others use it as sdcard controller.
|
||||
* To handle the most critical situation, the controller will be configured as
|
||||
* sdcard controller by default. An overlay can be set to disable the sdmmc_ext
|
||||
* node and enable this sdio_ext in case wifi chips are attached to this.
|
||||
*/
|
||||
sdio_ext: mmc@ff5f0000 {
|
||||
compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc";
|
||||
reg = <0x0 0xff5f0000 0x0 0x4000>;
|
||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru HCLK_SDMMC_EXT>, <&cru SCLK_SDMMC_EXT>,
|
||||
<&cru SCLK_SDMMC_EXT_DRV>, <&cru SCLK_SDMMC_EXT_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <150000000>;
|
||||
resets = <&cru SRST_SDMMCEXT>;
|
||||
reset-names = "reset";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-0 = <&sdmmc0ext_cmd &sdmmc0ext_clk &sdmmc0ext_bus4>;
|
||||
pinctrl-names = "default";
|
||||
supports-sdio;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&dfi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dmc {
|
||||
center-supply = <&vdd_logic>;
|
||||
ddr_timing = <&ddr_timing>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_arm>;
|
||||
};
|
||||
|
||||
&display_subsystem {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&emmc {
|
||||
|
||||
supports-emmc;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
bus-width = <8>;
|
||||
num-slots = <0x01>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
|
||||
vmmc-supply = <&vcc_io>;
|
||||
vqmmc-supply = <&vcc_18>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <500>;
|
||||
cd-gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
||||
supports-sd;
|
||||
status = "okay";
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
};
|
||||
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
num-slots = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
|
||||
supports-sdio;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* sdmmc_ext is configured as sdcard controller and enabled by default.
|
||||
* In this way boards which have the sdcard attached to sdmmc_ext will work
|
||||
* by default. In case the controller is not attached to anything, the
|
||||
* kernel will just autodetect and give up.
|
||||
*/
|
||||
&sdmmc_ext {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
card-detect-delay = <500>;
|
||||
cd-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0ext_clk &sdmmc0ext_cmd &sdmmc0ext_dectn &sdmmc0ext_bus4>;
|
||||
supports-sd;
|
||||
status = "okay";
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
};
|
||||
|
||||
&gmac2phy {
|
||||
phy-supply = <&vcc_phy>;
|
||||
|
||||
phy-mode = "rmii";
|
||||
|
||||
clock_in_out = "output";
|
||||
assigned-clocks = <&cru SCLK_MAC2PHY>;
|
||||
assigned-clock-rate = <50000000>;
|
||||
assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
mali-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
/*
|
||||
&h265e {
|
||||
status = "okay";
|
||||
};
|
||||
*/
|
||||
|
||||
&h265e_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-0 = <&spdifm0_tx>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif_out {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spdif_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmiphy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
vccio1-supply = <&vcc_io>;
|
||||
vccio2-supply = <&vcc_18>;
|
||||
vccio3-supply = <&vcc_io>;
|
||||
vccio4-supply = <&vcc_18>;
|
||||
vccio5-supply = <&vcc_io>;
|
||||
vccio6-supply = <&vcc_io>;
|
||||
pmuio-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clk_32k_out>;
|
||||
|
||||
clk_32k {
|
||||
clk_32k_out: clk-32k-out {
|
||||
rockchip,pins = <1 RK_PD4 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
working_led: working-led {
|
||||
rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none_2ma>;
|
||||
};
|
||||
};
|
||||
|
||||
ir {
|
||||
ir_int: ir-int {
|
||||
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none_4ma>;/*,
|
||||
<1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none_4ma>;*/
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
usb20_host_drv: usb20-host-drv {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb3 {
|
||||
usb30_host_drv: usb30-host-drv {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-wlan {
|
||||
|
||||
/*
|
||||
* SDIO host wake interrupt on YX_RK3328 board (sdio is attached to
|
||||
* regular mmc controller mmc@ff510000)
|
||||
*/
|
||||
sdio_host_wake: sdio-host-wake {
|
||||
rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/*
|
||||
* SDIO host wake interrupt on X88_PRO_B board (sdio is attached to
|
||||
* alternative mmc controller mmc@ff5f0000)
|
||||
*/
|
||||
sdio_host_wake_ext: sdio-host-wake-ext {
|
||||
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/*
|
||||
&vdec {
|
||||
status = "okay";
|
||||
vcodec-supply = <&vdd_logic>;
|
||||
};
|
||||
*/
|
||||
|
||||
&vdec_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&threshold {
|
||||
temperature = <80000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&target {
|
||||
temperature = <95000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&soc_crit {
|
||||
temperature = <100000>; /* millicelsius */
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <0>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
||||
status = "okay";
|
||||
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
/delete-property/ dmas;
|
||||
/delete-property/ dma-names;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy {
|
||||
status = "okay";
|
||||
|
||||
u2phy_host: host-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usb20_otg {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vpu {
|
||||
status = "okay";
|
||||
vcodec-supply = <&vdd_logic>;
|
||||
};
|
||||
|
||||
&vpu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
&vepu {
|
||||
status = "okay";
|
||||
};
|
||||
*/
|
||||
|
||||
&vepu_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_18>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
&rga {
|
||||
status = "okay";
|
||||
};
|
||||
*/
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&analog_sound {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user