# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

# default values
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "display"
setenv bootlogo "false"
setenv disp_mode "1920x1080m60"
setenv earlycon "off"
if test -z "${bootfstype}"; then setenv rootfstype "ext4"; else setenv rootfstype "${bootfstype}"; fi

if test "${board}" = mx6cuboxi; then 
  setenv ramdisk_addr_r "0x14800000"
  if test -z "${fdtfile}"; then setenv fdtfile "imx6q-cubox-i.dtb"; fi
  if test -z "${cons}"; then setenv cons "ttymxc0,115200"; fi
fi

if load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} ${prefix}armbianEnv.txt ; then
	env import -t ${loadaddr} ${filesize}
fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=${cons}"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
if test "${bootlogo}" = "true"; then
	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
else
	setenv consoleargs "splash=verbose ${consoleargs}"
fi

setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} consoleblank=0 video=mxcfb0:dev=hdmi,${disp_mode},if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}zImage

bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr