Add the rockchip innosilicon usb3 phy driver, supporting devices such as the rk3328. Pulled from: https://github.com/FireflyTeam/kernel/blob/roc-rk3328-cc/drivers/phy/rockchip/phy-rockchip-inno-usb3.c Signed-off-by: Peter Geis --- drivers/phy/rockchip/Kconfig | 9 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-inno-usb3.c | 1107 +++++++++++++++++ 3 files changed, 1117 insertions(+) create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-usb3.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index c454c90cd99e..766407939d4a 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -35,6 +35,15 @@ config PHY_ROCKCHIP_INNO_USB2 help Support for Rockchip USB2.0 PHY with Innosilicon IP block. +config PHY_ROCKCHIP_INNO_USB3 + tristate "Rockchip INNO USB 3.0 PHY Driver" + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Support for Rockchip USB 3.0 PHY with Innosilicon IP block. + config PHY_ROCKCHIP_PCIE tristate "Rockchip PCIe PHY Driver" depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index fd21cbaf40dd..d7b3d16c19ae 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB3) += phy-rockchip-inno-usb3.o obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb3.c b/drivers/phy/rockchip/phy-rockchip-inno-usb3.c new file mode 100644 index 000000000000..31fee8f3a705 --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb3.c @@ -0,0 +1,1107 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Rockchip USB 3.0 PHY with Innosilicon IP block driver + * + * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define U3PHY_PORT_NUM 2 +#define BIT_WRITEABLE_SHIFT 16 +#define SCHEDULE_DELAY (60 * HZ) + +#define U3PHY_APB_RST BIT(0) +#define U3PHY_POR_RST BIT(1) +#define U3PHY_MAC_RST BIT(2) + +struct rockchip_u3phy; +struct rockchip_u3phy_port; + +enum rockchip_u3phy_type { + U3PHY_TYPE_PIPE, + U3PHY_TYPE_UTMI, +}; + +enum rockchip_u3phy_pipe_pwr { + PIPE_PWR_P0 = 0, + PIPE_PWR_P1 = 1, + PIPE_PWR_P2 = 2, + PIPE_PWR_P3 = 3, + PIPE_PWR_MAX = 4, +}; + +enum rockchip_u3phy_rest_req { + U3_POR_RSTN = 0, + U2_POR_RSTN = 1, + PIPE_MAC_RSTN = 2, + UTMI_MAC_RSTN = 3, + PIPE_APB_RSTN = 4, + UTMI_APB_RSTN = 5, + U3PHY_RESET_MAX = 6, +}; + +enum rockchip_u3phy_utmi_state { + PHY_UTMI_HS_ONLINE = 0, + PHY_UTMI_DISCONNECT = 1, + PHY_UTMI_CONNECT = 2, + PHY_UTMI_FS_LS_ONLINE = 4, +}; + +/* + * @rvalue: reset value + * @dvalue: desired value + */ +struct u3phy_reg { + unsigned int offset; + unsigned int bitend; + unsigned int bitstart; + unsigned int rvalue; + unsigned int dvalue; +}; + +struct rockchip_u3phy_grfcfg { + struct u3phy_reg um_suspend; + struct u3phy_reg ls_det_en; + struct u3phy_reg ls_det_st; + struct u3phy_reg um_ls; + struct u3phy_reg um_hstdct; + struct u3phy_reg u2_only_ctrl; + struct u3phy_reg u3_disable; + struct u3phy_reg pp_pwr_st; + struct u3phy_reg pp_pwr_en[PIPE_PWR_MAX]; +}; + +/** + * struct rockchip_u3phy_apbcfg: usb3-phy apb configuration. + * @u2_pre_emp: usb2-phy pre-emphasis tuning. + * @u2_pre_emp_sth: usb2-phy pre-emphasis strength tuning. + * @u2_odt_tuning: usb2-phy odt 45ohm tuning. + */ +struct rockchip_u3phy_apbcfg { + unsigned int u2_pre_emp; + unsigned int u2_pre_emp_sth; + unsigned int u2_odt_tuning; +}; + +struct rockchip_u3phy_cfg { + unsigned int reg; + const struct rockchip_u3phy_grfcfg grfcfg; + + int (*phy_pipe_power)(struct rockchip_u3phy *u3phy, + struct rockchip_u3phy_port *u3phy_port, + bool on); + int (*phy_tuning)(struct rockchip_u3phy *u3phy, + struct rockchip_u3phy_port *u3phy_port, + struct device_node *child_np); +}; + +struct rockchip_u3phy_port { + struct phy *phy; + void __iomem *base; + unsigned int index; + unsigned char type; + bool suspended; + bool refclk_25m_quirk; + struct mutex mutex; /* mutex for updating register */ + struct delayed_work um_sm_work; +}; + +struct rockchip_u3phy { + struct device *dev; + struct regmap *u3phy_grf; + struct regmap *grf; + int um_ls_irq; + struct clk **clks; + int num_clocks; + struct dentry *root; + struct gpio_desc *vbus_drv_gpio; + struct reset_control *rsts[U3PHY_RESET_MAX]; + struct rockchip_u3phy_apbcfg apbcfg; + const struct rockchip_u3phy_cfg *cfgs; + struct rockchip_u3phy_port ports[U3PHY_PORT_NUM]; + struct usb_phy usb_phy; +}; + +static inline int param_write(void __iomem *base, + const struct u3phy_reg *reg, bool desired) +{ + unsigned int val, mask; + unsigned int tmp = desired ? reg->dvalue : reg->rvalue; + int ret = 0; + + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + ret = regmap_write(base, reg->offset, val); + + return ret; +} + +static inline bool param_exped(void __iomem *base, + const struct u3phy_reg *reg, + unsigned int value) +{ + int ret; + unsigned int tmp, orig; + unsigned int mask = GENMASK(reg->bitend, reg->bitstart); + + ret = regmap_read(base, reg->offset, &orig); + if (ret) + return false; + + tmp = (orig & mask) >> reg->bitstart; + return tmp == value; +} + +static int rockchip_u3phy_usb2_only_show(struct seq_file *s, void *unused) +{ + struct rockchip_u3phy *u3phy = s->private; + + if (param_exped(u3phy->u3phy_grf, &u3phy->cfgs->grfcfg.u2_only_ctrl, 1)) + dev_info(u3phy->dev, "u2\n"); + else + dev_info(u3phy->dev, "u3\n"); + + return 0; +} + +static int rockchip_u3phy_usb2_only_open(struct inode *inode, + struct file *file) +{ + return single_open(file, rockchip_u3phy_usb2_only_show, + inode->i_private); +} + +static ssize_t rockchip_u3phy_usb2_only_write(struct file *file, + const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct rockchip_u3phy *u3phy = s->private; + struct rockchip_u3phy_port *u3phy_port; + char buf[32]; + u8 index; + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) + return -EFAULT; + + if (!strncmp(buf, "u3", 2) && + param_exped(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.u2_only_ctrl, 1)) { + dev_info(u3phy->dev, "Set usb3.0 and usb2.0 mode successfully\n"); + + gpiod_set_value_cansleep(u3phy->vbus_drv_gpio, 0); + + param_write(u3phy->grf, + &u3phy->cfgs->grfcfg.u3_disable, false); + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.u2_only_ctrl, false); + + for (index = 0; index < U3PHY_PORT_NUM; index++) { + u3phy_port = &u3phy->ports[index]; + /* enable u3 rx termimation */ + if (u3phy_port->type == U3PHY_TYPE_PIPE) + writel(0x30, u3phy_port->base + 0xd8); + } + + atomic_notifier_call_chain(&u3phy->usb_phy.notifier, 0, NULL); + + gpiod_set_value_cansleep(u3phy->vbus_drv_gpio, 1); + } else if (!strncmp(buf, "u2", 2) && + param_exped(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.u2_only_ctrl, 0)) { + dev_info(u3phy->dev, "Set usb2.0 only mode successfully\n"); + + gpiod_set_value_cansleep(u3phy->vbus_drv_gpio, 0); + + param_write(u3phy->grf, + &u3phy->cfgs->grfcfg.u3_disable, true); + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.u2_only_ctrl, true); + + for (index = 0; index < U3PHY_PORT_NUM; index++) { + u3phy_port = &u3phy->ports[index]; + /* disable u3 rx termimation */ + if (u3phy_port->type == U3PHY_TYPE_PIPE) + writel(0x20, u3phy_port->base + 0xd8); + } + + atomic_notifier_call_chain(&u3phy->usb_phy.notifier, 0, NULL); + + gpiod_set_value_cansleep(u3phy->vbus_drv_gpio, 1); + } else { + dev_info(u3phy->dev, "Same or illegal mode\n"); + } + + return count; +} + +static const struct file_operations rockchip_u3phy_usb2_only_fops = { + .open = rockchip_u3phy_usb2_only_open, + .write = rockchip_u3phy_usb2_only_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +int rockchip_u3phy_debugfs_init(struct rockchip_u3phy *u3phy) +{ + struct dentry *root; + struct dentry *file; + int ret; + + root = debugfs_create_dir(dev_name(u3phy->dev), NULL); + if (!root) { + ret = -ENOMEM; + goto err0; + } + + u3phy->root = root; + + file = debugfs_create_file("u3phy_mode", 0644, root, + u3phy, &rockchip_u3phy_usb2_only_fops); + if (!file) { + ret = -ENOMEM; + goto err1; + } + return 0; + +err1: + debugfs_remove_recursive(root); +err0: + return ret; +} + +static const char *get_rest_name(enum rockchip_u3phy_rest_req rst) +{ + switch (rst) { + case U2_POR_RSTN: + return "u3phy-u2-por"; + case U3_POR_RSTN: + return "u3phy-u3-por"; + case PIPE_MAC_RSTN: + return "u3phy-pipe-mac"; + case UTMI_MAC_RSTN: + return "u3phy-utmi-mac"; + case UTMI_APB_RSTN: + return "u3phy-utmi-apb"; + case PIPE_APB_RSTN: + return "u3phy-pipe-apb"; + default: + return "invalid"; + } +} + +static void rockchip_u3phy_rest_deassert(struct rockchip_u3phy *u3phy, + unsigned int flag) +{ + int rst; + + if (flag & U3PHY_APB_RST) { + dev_dbg(u3phy->dev, "deassert APB bus interface reset\n"); + for (rst = PIPE_APB_RSTN; rst <= UTMI_APB_RSTN; rst++) { + if (u3phy->rsts[rst]) + reset_control_deassert(u3phy->rsts[rst]); + } + } + + if (flag & U3PHY_POR_RST) { + usleep_range(12, 15); + dev_dbg(u3phy->dev, "deassert u2 and u3 phy power on reset\n"); + for (rst = U3_POR_RSTN; rst <= U2_POR_RSTN; rst++) { + if (u3phy->rsts[rst]) + reset_control_deassert(u3phy->rsts[rst]); + } + } + + if (flag & U3PHY_MAC_RST) { + usleep_range(1200, 1500); + dev_dbg(u3phy->dev, "deassert pipe and utmi MAC reset\n"); + for (rst = PIPE_MAC_RSTN; rst <= UTMI_MAC_RSTN; rst++) + if (u3phy->rsts[rst]) + reset_control_deassert(u3phy->rsts[rst]); + } +} + +static void rockchip_u3phy_rest_assert(struct rockchip_u3phy *u3phy) +{ + int rst; + + dev_dbg(u3phy->dev, "assert u3phy reset\n"); + for (rst = 0; rst < U3PHY_RESET_MAX; rst++) + if (u3phy->rsts[rst]) + reset_control_assert(u3phy->rsts[rst]); +} + +static int rockchip_u3phy_clk_enable(struct rockchip_u3phy *u3phy) +{ + int ret, clk; + + for (clk = 0; clk < u3phy->num_clocks && u3phy->clks[clk]; clk++) { + ret = clk_prepare_enable(u3phy->clks[clk]); + if (ret) + goto err_disable_clks; + } + return 0; + +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(u3phy->clks[clk]); + return ret; +} + +static void rockchip_u3phy_clk_disable(struct rockchip_u3phy *u3phy) +{ + int clk; + + for (clk = u3phy->num_clocks - 1; clk >= 0; clk--) + if (u3phy->clks[clk]) + clk_disable_unprepare(u3phy->clks[clk]); +} + +static int rockchip_u3phy_init(struct phy *phy) +{ + return 0; +} + +static int rockchip_u3phy_exit(struct phy *phy) +{ + return 0; +} + +static int rockchip_u3phy_power_on(struct phy *phy) +{ + struct rockchip_u3phy_port *u3phy_port = phy_get_drvdata(phy); + struct rockchip_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + int ret; + + dev_info(&u3phy_port->phy->dev, "u3phy %s power on\n", + (u3phy_port->type == U3PHY_TYPE_UTMI) ? "u2" : "u3"); + + if (!u3phy_port->suspended) + return 0; + + ret = rockchip_u3phy_clk_enable(u3phy); + if (ret) + return ret; + + if (u3phy_port->type == U3PHY_TYPE_UTMI) { + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.um_suspend, false); + } else { + /* current in p2 ? */ + if (param_exped(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_st, PIPE_PWR_P2)) + goto done; + + if (u3phy->cfgs->phy_pipe_power) { + dev_dbg(u3phy->dev, "do pipe power up\n"); + u3phy->cfgs->phy_pipe_power(u3phy, u3phy_port, true); + } + + /* exit to p0 */ + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_en[PIPE_PWR_P0], true); + usleep_range(90, 100); + + /* enter to p2 from p0 */ + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_en[PIPE_PWR_P2], + false); + udelay(3); + } + +done: + u3phy_port->suspended = false; + return 0; +} + +static int rockchip_u3phy_power_off(struct phy *phy) +{ + struct rockchip_u3phy_port *u3phy_port = phy_get_drvdata(phy); + struct rockchip_u3phy *u3phy = dev_get_drvdata(phy->dev.parent); + + dev_info(&u3phy_port->phy->dev, "u3phy %s power off\n", + (u3phy_port->type == U3PHY_TYPE_UTMI) ? "u2" : "u3"); + + if (u3phy_port->suspended) + return 0; + + if (u3phy_port->type == U3PHY_TYPE_UTMI) { + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.um_suspend, true); + } else { + /* current in p3 ? */ + if (param_exped(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_st, PIPE_PWR_P3)) + goto done; + + /* exit to p0 */ + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_en[PIPE_PWR_P0], true); + udelay(2); + + /* enter to p3 from p0 */ + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.pp_pwr_en[PIPE_PWR_P3], true); + udelay(6); + + if (u3phy->cfgs->phy_pipe_power) { + dev_dbg(u3phy->dev, "do pipe power down\n"); + u3phy->cfgs->phy_pipe_power(u3phy, u3phy_port, false); + } + } + +done: + rockchip_u3phy_clk_disable(u3phy); + u3phy_port->suspended = true; + return 0; +} + +static __maybe_unused +struct phy *rockchip_u3phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct rockchip_u3phy *u3phy = dev_get_drvdata(dev); + struct rockchip_u3phy_port *u3phy_port = NULL; + struct device_node *phy_np = args->np; + int index; + + if (args->args_count != 1) { + dev_err(dev, "invalid number of cells in 'phy' property\n"); + return ERR_PTR(-EINVAL); + } + + for (index = 0; index < U3PHY_PORT_NUM; index++) { + if (phy_np == u3phy->ports[index].phy->dev.of_node) { + u3phy_port = &u3phy->ports[index]; + break; + } + } + + if (!u3phy_port) { + dev_err(dev, "failed to find appropriate phy\n"); + return ERR_PTR(-EINVAL); + } + + return u3phy_port->phy; +} + +static struct phy_ops rockchip_u3phy_ops = { + .init = rockchip_u3phy_init, + .exit = rockchip_u3phy_exit, + .power_on = rockchip_u3phy_power_on, + .power_off = rockchip_u3phy_power_off, + .owner = THIS_MODULE, +}; + +/* + * The function manage host-phy port state and suspend/resume phy port + * to save power automatically. + * + * we rely on utmi_linestate and utmi_hostdisconnect to identify whether + * devices is disconnect or not. Besides, we do not need care it is FS/LS + * disconnected or HS disconnected, actually, we just only need get the + * device is disconnected at last through rearm the delayed work, + * to suspend the phy port in _PHY_STATE_DISCONNECT_ case. + */ +static void rockchip_u3phy_um_sm_work(struct work_struct *work) +{ + struct rockchip_u3phy_port *u3phy_port = + container_of(work, struct rockchip_u3phy_port, um_sm_work.work); + struct rockchip_u3phy *u3phy = + dev_get_drvdata(u3phy_port->phy->dev.parent); + unsigned int sh = u3phy->cfgs->grfcfg.um_hstdct.bitend - + u3phy->cfgs->grfcfg.um_hstdct.bitstart + 1; + unsigned int ul, uhd, state; + unsigned int ul_mask, uhd_mask; + int ret; + + mutex_lock(&u3phy_port->mutex); + + ret = regmap_read(u3phy->u3phy_grf, + u3phy->cfgs->grfcfg.um_ls.offset, &ul); + if (ret < 0) + goto next_schedule; + + ret = regmap_read(u3phy->u3phy_grf, + u3phy->cfgs->grfcfg.um_hstdct.offset, &uhd); + if (ret < 0) + goto next_schedule; + + uhd_mask = GENMASK(u3phy->cfgs->grfcfg.um_hstdct.bitend, + u3phy->cfgs->grfcfg.um_hstdct.bitstart); + ul_mask = GENMASK(u3phy->cfgs->grfcfg.um_ls.bitend, + u3phy->cfgs->grfcfg.um_ls.bitstart); + + /* stitch on um_ls and um_hstdct as phy state */ + state = ((uhd & uhd_mask) >> u3phy->cfgs->grfcfg.um_hstdct.bitstart) | + (((ul & ul_mask) >> u3phy->cfgs->grfcfg.um_ls.bitstart) << sh); + + switch (state) { + case PHY_UTMI_HS_ONLINE: + dev_dbg(&u3phy_port->phy->dev, "HS online\n"); + break; + case PHY_UTMI_FS_LS_ONLINE: + /* + * For FS/LS device, the online state share with connect state + * from um_ls and um_hstdct register, so we distinguish + * them via suspended flag. + * + * Plus, there are two cases, one is D- Line pull-up, and D+ + * line pull-down, the state is 4; another is D+ line pull-up, + * and D- line pull-down, the state is 2. + */ + if (!u3phy_port->suspended) { + /* D- line pull-up, D+ line pull-down */ + dev_dbg(&u3phy_port->phy->dev, "FS/LS online\n"); + break; + } + /* fall through */ + case PHY_UTMI_CONNECT: + if (u3phy_port->suspended) { + dev_dbg(&u3phy_port->phy->dev, "Connected\n"); + rockchip_u3phy_power_on(u3phy_port->phy); + u3phy_port->suspended = false; + } else { + /* D+ line pull-up, D- line pull-down */ + dev_dbg(&u3phy_port->phy->dev, "FS/LS online\n"); + } + break; + case PHY_UTMI_DISCONNECT: + if (!u3phy_port->suspended) { + dev_dbg(&u3phy_port->phy->dev, "Disconnected\n"); + rockchip_u3phy_power_off(u3phy_port->phy); + u3phy_port->suspended = true; + } + + /* + * activate the linestate detection to get the next device + * plug-in irq. + */ + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.ls_det_st, true); + param_write(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.ls_det_en, true); + + /* + * we don't need to rearm the delayed work when the phy port + * is suspended. + */ + mutex_unlock(&u3phy_port->mutex); + return; + default: + dev_dbg(&u3phy_port->phy->dev, "unknown phy state\n"); + break; + } + +next_schedule: + mutex_unlock(&u3phy_port->mutex); + schedule_delayed_work(&u3phy_port->um_sm_work, SCHEDULE_DELAY); +} + +static irqreturn_t rockchip_u3phy_um_ls_irq(int irq, void *data) +{ + struct rockchip_u3phy_port *u3phy_port = data; + struct rockchip_u3phy *u3phy = + dev_get_drvdata(u3phy_port->phy->dev.parent); + + if (!param_exped(u3phy->u3phy_grf, + &u3phy->cfgs->grfcfg.ls_det_st, + u3phy->cfgs->grfcfg.ls_det_st.dvalue)) + return IRQ_NONE; + + dev_dbg(u3phy->dev, "utmi linestate interrupt\n"); + mutex_lock(&u3phy_port->mutex); + + /* disable linestate detect irq and clear its status */ + param_write(u3phy->u3phy_grf, &u3phy->cfgs->grfcfg.ls_det_en, false); + param_write(u3phy->u3phy_grf, &u3phy->cfgs->grfcfg.ls_det_st, true); + + mutex_unlock(&u3phy_port->mutex); + + /* + * In this case for host phy, a new device is plugged in, meanwhile, + * if the phy port is suspended, we need rearm the work to resume it + * and mange its states; otherwise, we just return irq handled. + */ + if (u3phy_port->suspended) { + dev_dbg(u3phy->dev, "schedule utmi sm work\n"); + rockchip_u3phy_um_sm_work(&u3phy_port->um_sm_work.work); + } + + return IRQ_HANDLED; +} + +static int rockchip_u3phy_parse_dt(struct rockchip_u3phy *u3phy, + struct platform_device *pdev) + +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + int ret, i, clk; + + u3phy->um_ls_irq = platform_get_irq_byname(pdev, "linestate"); + if (u3phy->um_ls_irq < 0) { + dev_err(dev, "get utmi linestate irq failed\n"); + return -ENXIO; + } + + u3phy->vbus_drv_gpio = devm_gpiod_get_optional(dev, "vbus-drv", + GPIOD_OUT_HIGH); + + if (!u3phy->vbus_drv_gpio) { + dev_warn(&pdev->dev, "vbus_drv is not assigned\n"); + } else if (IS_ERR(u3phy->vbus_drv_gpio)) { + dev_err(&pdev->dev, "failed to get vbus_drv\n"); + return PTR_ERR(u3phy->vbus_drv_gpio); + } + + u3phy->num_clocks = of_clk_get_parent_count(np); + if (u3phy->num_clocks == 0) + dev_warn(&pdev->dev, "no clks found in dt\n"); + + u3phy->clks = devm_kcalloc(dev, u3phy->num_clocks, + sizeof(struct clk *), GFP_KERNEL); + + for (clk = 0; clk < u3phy->num_clocks; clk++) { + u3phy->clks[clk] = of_clk_get(np, clk); + if (IS_ERR(u3phy->clks[clk])) { + ret = PTR_ERR(u3phy->clks[clk]); + if (ret == -EPROBE_DEFER) + goto err_put_clks; + dev_err(&pdev->dev, "failed to get clks, %i\n", + ret); + u3phy->clks[clk] = NULL; + break; + } + } + + for (i = 0; i < U3PHY_RESET_MAX; i++) { + u3phy->rsts[i] = devm_reset_control_get(dev, get_rest_name(i)); + if (IS_ERR(u3phy->rsts[i])) { + dev_info(dev, "no %s reset control specified\n", + get_rest_name(i)); + u3phy->rsts[i] = NULL; + } + } + + return 0; + +err_put_clks: + while (--clk >= 0) + clk_put(u3phy->clks[clk]); + return ret; +} + +static int rockchip_u3phy_port_init(struct rockchip_u3phy *u3phy, + struct rockchip_u3phy_port *u3phy_port, + struct device_node *child_np) +{ + struct resource res; + struct phy *phy; + int ret; + + dev_dbg(u3phy->dev, "u3phy port initialize\n"); + + mutex_init(&u3phy_port->mutex); + u3phy_port->suspended = true; /* initial status */ + + phy = devm_phy_create(u3phy->dev, child_np, &rockchip_u3phy_ops); + if (IS_ERR(phy)) { + dev_err(u3phy->dev, "failed to create phy\n"); + return PTR_ERR(phy); + } + + u3phy_port->phy = phy; + + ret = of_address_to_resource(child_np, 0, &res); + if (ret) { + dev_err(u3phy->dev, "failed to get address resource(np-%s)\n", + child_np->name); + return ret; + } + + u3phy_port->base = devm_ioremap_resource(&u3phy_port->phy->dev, &res); + if (IS_ERR(u3phy_port->base)) { + dev_err(u3phy->dev, "failed to remap phy regs\n"); + return PTR_ERR(u3phy_port->base); + } + + if (!of_node_cmp(child_np->name, "pipe")) { + u3phy_port->type = U3PHY_TYPE_PIPE; + u3phy_port->refclk_25m_quirk = + of_property_read_bool(child_np, + "rockchip,refclk-25m-quirk"); + } else { + u3phy_port->type = U3PHY_TYPE_UTMI; + INIT_DELAYED_WORK(&u3phy_port->um_sm_work, + rockchip_u3phy_um_sm_work); + + ret = devm_request_threaded_irq(u3phy->dev, u3phy->um_ls_irq, + NULL, rockchip_u3phy_um_ls_irq, + IRQF_ONESHOT, "rockchip_u3phy", + u3phy_port); + if (ret) { + dev_err(u3phy->dev, "failed to request utmi linestate irq handle\n"); + return ret; + } + } + + if (u3phy->cfgs->phy_tuning) { + dev_dbg(u3phy->dev, "do u3phy tuning\n"); + ret = u3phy->cfgs->phy_tuning(u3phy, u3phy_port, child_np); + if (ret) + return ret; + } + + phy_set_drvdata(u3phy_port->phy, u3phy_port); + return 0; +} + +static int rockchip_u3phy_on_init(struct usb_phy *usb_phy) +{ + struct rockchip_u3phy *u3phy = + container_of(usb_phy, struct rockchip_u3phy, usb_phy); + + rockchip_u3phy_rest_deassert(u3phy, U3PHY_POR_RST | U3PHY_MAC_RST); + return 0; +} + +static void rockchip_u3phy_on_shutdown(struct usb_phy *usb_phy) +{ + struct rockchip_u3phy *u3phy = + container_of(usb_phy, struct rockchip_u3phy, usb_phy); + int rst; + + for (rst = 0; rst < U3PHY_RESET_MAX; rst++) + if (u3phy->rsts[rst] && rst != UTMI_APB_RSTN && + rst != PIPE_APB_RSTN) + reset_control_assert(u3phy->rsts[rst]); + udelay(1); +} + +static int rockchip_u3phy_on_disconnect(struct usb_phy *usb_phy, + enum usb_device_speed speed) +{ + struct rockchip_u3phy *u3phy = + container_of(usb_phy, struct rockchip_u3phy, usb_phy); + + dev_info(u3phy->dev, "%s device has disconnected\n", + (speed == USB_SPEED_SUPER) ? "U3" : "UW/U2/U1.1/U1"); + + if (speed == USB_SPEED_SUPER) + atomic_notifier_call_chain(&usb_phy->notifier, 0, NULL); + + return 0; +} + +static int rockchip_u3phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct device_node *child_np; + struct phy_provider *provider; + struct rockchip_u3phy *u3phy; + const struct rockchip_u3phy_cfg *phy_cfgs; + const struct of_device_id *match; + unsigned int reg[2]; + int index, ret; + + match = of_match_device(dev->driver->of_match_table, dev); + if (!match || !match->data) { + dev_err(dev, "phy-cfgs are not assigned!\n"); + return -EINVAL; + } + + u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL); + if (!u3phy) + return -ENOMEM; + + u3phy->u3phy_grf = + syscon_regmap_lookup_by_phandle(np, "rockchip,u3phygrf"); + if (IS_ERR(u3phy->u3phy_grf)) + return PTR_ERR(u3phy->u3phy_grf); + + u3phy->grf = + syscon_regmap_lookup_by_phandle(np, "rockchip,grf"); + if (IS_ERR(u3phy->grf)) { + dev_err(dev, "Missing rockchip,grf property\n"); + return PTR_ERR(u3phy->grf); + } + + if (of_property_read_u32_array(np, "reg", reg, 2)) { + dev_err(dev, "the reg property is not assigned in %s node\n", + np->name); + return -EINVAL; + } + + u3phy->dev = dev; + phy_cfgs = match->data; + platform_set_drvdata(pdev, u3phy); + + /* find out a proper config which can be matched with dt. */ + index = 0; + while (phy_cfgs[index].reg) { + if (phy_cfgs[index].reg == reg[1]) { + u3phy->cfgs = &phy_cfgs[index]; + break; + } + + ++index; + } + + if (!u3phy->cfgs) { + dev_err(dev, "no phy-cfgs can be matched with %s node\n", + np->name); + return -EINVAL; + } + + ret = rockchip_u3phy_parse_dt(u3phy, pdev); + if (ret) { + dev_err(dev, "parse dt failed, ret(%d)\n", ret); + return ret; + } + + ret = rockchip_u3phy_clk_enable(u3phy); + if (ret) { + dev_err(dev, "clk enable failed, ret(%d)\n", ret); + return ret; + } + + rockchip_u3phy_rest_assert(u3phy); + rockchip_u3phy_rest_deassert(u3phy, U3PHY_APB_RST | U3PHY_POR_RST); + + index = 0; + for_each_available_child_of_node(np, child_np) { + struct rockchip_u3phy_port *u3phy_port = &u3phy->ports[index]; + + u3phy_port->index = index; + ret = rockchip_u3phy_port_init(u3phy, u3phy_port, child_np); + if (ret) { + dev_err(dev, "u3phy port init failed,ret(%d)\n", ret); + goto put_child; + } + + /* to prevent out of boundary */ + if (++index >= U3PHY_PORT_NUM) + break; + } + + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR_OR_NULL(provider)) + goto put_child; + + rockchip_u3phy_rest_deassert(u3phy, U3PHY_MAC_RST); + rockchip_u3phy_clk_disable(u3phy); + + u3phy->usb_phy.dev = dev; + u3phy->usb_phy.init = rockchip_u3phy_on_init; + u3phy->usb_phy.shutdown = rockchip_u3phy_on_shutdown; + u3phy->usb_phy.notify_disconnect = rockchip_u3phy_on_disconnect; + usb_add_phy(&u3phy->usb_phy, USB_PHY_TYPE_USB3); + ATOMIC_INIT_NOTIFIER_HEAD(&u3phy->usb_phy.notifier); + + rockchip_u3phy_debugfs_init(u3phy); + + dev_info(dev, "Rockchip u3phy initialized successfully\n"); + return 0; + +put_child: + of_node_put(child_np); + return ret; +} + +static int rk3328_u3phy_pipe_power(struct rockchip_u3phy *u3phy, + struct rockchip_u3phy_port *u3phy_port, + bool on) +{ + unsigned int reg; + + if (on) { + reg = readl(u3phy_port->base + 0x1a8); + reg &= ~BIT(4); /* ldo power up */ + writel(reg, u3phy_port->base + 0x1a8); + + reg = readl(u3phy_port->base + 0x044); + reg &= ~BIT(4); /* bg power on */ + writel(reg, u3phy_port->base + 0x044); + + reg = readl(u3phy_port->base + 0x150); + reg |= BIT(6); /* tx bias enable */ + writel(reg, u3phy_port->base + 0x150); + + reg = readl(u3phy_port->base + 0x080); + reg &= ~BIT(2); /* tx cm power up */ + writel(reg, u3phy_port->base + 0x080); + + reg = readl(u3phy_port->base + 0x0c0); + /* tx obs enable and rx cm enable */ + reg |= (BIT(3) | BIT(4)); + writel(reg, u3phy_port->base + 0x0c0); + + udelay(1); + } else { + reg = readl(u3phy_port->base + 0x1a8); + reg |= BIT(4); /* ldo power down */ + writel(reg, u3phy_port->base + 0x1a8); + + reg = readl(u3phy_port->base + 0x044); + reg |= BIT(4); /* bg power down */ + writel(reg, u3phy_port->base + 0x044); + + reg = readl(u3phy_port->base + 0x150); + reg &= ~BIT(6); /* tx bias disable */ + writel(reg, u3phy_port->base + 0x150); + + reg = readl(u3phy_port->base + 0x080); + reg |= BIT(2); /* tx cm power down */ + writel(reg, u3phy_port->base + 0x080); + + reg = readl(u3phy_port->base + 0x0c0); + /* tx obs disable and rx cm disable */ + reg &= ~(BIT(3) | BIT(4)); + writel(reg, u3phy_port->base + 0x0c0); + } + + return 0; +} + +static int rk3328_u3phy_tuning(struct rockchip_u3phy *u3phy, + struct rockchip_u3phy_port *u3phy_port, + struct device_node *child_np) +{ + if (u3phy_port->type == U3PHY_TYPE_UTMI) { + /* + * For rk3328 SoC, pre-emphasis and pre-emphasis strength must + * be written as one fixed value as below. + * + * Dissimilarly, the odt 45ohm value should be flexibly tuninged + * for the different boards to adjust HS eye height, so its + * value can be assigned in DT in code design. + */ + + /* {bits[2:0]=111}: always enable pre-emphasis */ + u3phy->apbcfg.u2_pre_emp = 0x0f; + + /* {bits[5:3]=000}: pre-emphasis strength as the weakest */ + u3phy->apbcfg.u2_pre_emp_sth = 0x41; + + /* {bits[4:0]=10101}: odt 45ohm tuning */ + u3phy->apbcfg.u2_odt_tuning = 0xb5; + /* optional override of the odt 45ohm tuning */ + of_property_read_u32(child_np, "rockchip,odt-val-tuning", + &u3phy->apbcfg.u2_odt_tuning); + + writel(u3phy->apbcfg.u2_pre_emp, u3phy_port->base + 0x030); + writel(u3phy->apbcfg.u2_pre_emp_sth, u3phy_port->base + 0x040); + writel(u3phy->apbcfg.u2_odt_tuning, u3phy_port->base + 0x11c); + } else if (u3phy_port->type == U3PHY_TYPE_PIPE) { + if (u3phy_port->refclk_25m_quirk) { + dev_dbg(u3phy->dev, "switch to 25m refclk\n"); + /* ref clk switch to 25M */ + writel(0x64, u3phy_port->base + 0x11c); + writel(0x64, u3phy_port->base + 0x028); + writel(0x01, u3phy_port->base + 0x020); + writel(0x21, u3phy_port->base + 0x030); + writel(0x06, u3phy_port->base + 0x108); + writel(0x00, u3phy_port->base + 0x118); + } else { + /* configure for 24M ref clk */ + writel(0x80, u3phy_port->base + 0x10c); + writel(0x01, u3phy_port->base + 0x118); + writel(0x38, u3phy_port->base + 0x11c); + writel(0x83, u3phy_port->base + 0x020); + writel(0x02, u3phy_port->base + 0x108); + } + + /* Enable SSC */ + udelay(3); + writel(0x08, u3phy_port->base + 0x000); + writel(0x0c, u3phy_port->base + 0x120); + + /* Tuning Rx for compliance RJTL test */ + writel(0x70, u3phy_port->base + 0x150); + writel(0x12, u3phy_port->base + 0x0c8); + writel(0x05, u3phy_port->base + 0x148); + writel(0x08, u3phy_port->base + 0x068); + writel(0xf0, u3phy_port->base + 0x1c4); + writel(0xff, u3phy_port->base + 0x070); + writel(0x0f, u3phy_port->base + 0x06c); + writel(0xe0, u3phy_port->base + 0x060); + + /* + * Tuning Tx to increase the bias current + * used in TX driver and RX EQ, it can + * also increase the voltage of LFPS. + */ + writel(0x08, u3phy_port->base + 0x180); + } else { + dev_err(u3phy->dev, "invalid u3phy port type\n"); + return -EINVAL; + } + + return 0; +} + +static const struct rockchip_u3phy_cfg rk3328_u3phy_cfgs[] = { + { + .reg = 0xff470000, + .grfcfg = { + .um_suspend = { 0x0004, 15, 0, 0x1452, 0x15d1 }, + .u2_only_ctrl = { 0x0020, 15, 15, 0, 1 }, + .um_ls = { 0x0030, 5, 4, 0, 1 }, + .um_hstdct = { 0x0030, 7, 7, 0, 1 }, + .ls_det_en = { 0x0040, 0, 0, 0, 1 }, + .ls_det_st = { 0x0044, 0, 0, 0, 1 }, + .pp_pwr_st = { 0x0034, 14, 13, 0, 0}, + .pp_pwr_en = { {0x0020, 14, 0, 0x0014, 0x0005}, + {0x0020, 14, 0, 0x0014, 0x000d}, + {0x0020, 14, 0, 0x0014, 0x0015}, + {0x0020, 14, 0, 0x0014, 0x001d} }, + .u3_disable = { 0x04c4, 15, 0, 0x1100, 0x101}, + }, + .phy_pipe_power = rk3328_u3phy_pipe_power, + .phy_tuning = rk3328_u3phy_tuning, + }, + { /* sentinel */ } +}; + +static const struct of_device_id rockchip_u3phy_dt_match[] = { + { .compatible = "rockchip,rk3328-u3phy", .data = &rk3328_u3phy_cfgs }, + {} +}; +MODULE_DEVICE_TABLE(of, rockchip_u3phy_dt_match); + +static struct platform_driver rockchip_u3phy_driver = { + .probe = rockchip_u3phy_probe, + .driver = { + .name = "rockchip-u3phy", + .of_match_table = rockchip_u3phy_dt_match, + }, +}; +module_platform_driver(rockchip_u3phy_driver); + +MODULE_AUTHOR("Frank Wang "); +MODULE_AUTHOR("William Wu "); +MODULE_DESCRIPTION("Rockchip USB 3.0 PHY driver"); +MODULE_LICENSE("GPL v2"); diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb3.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb3.yaml new file mode 100644 index 000000000000..f4f28625173a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb3.yaml @@ -0,0 +1,157 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/phy/phy-rockchip-inno-usb3.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ROCKCHIP USB 3.0 PHY WITH INNO IP BLOCK + +maintainers: + +properties: + compatible: + enum: + - rockchip,rk3328-u3phy + + reg: + - description: the base address of the USB 3.0 PHY + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: linestate + description: host/otg linestate interrupt + + clocks: + maxItems: 2 + + clock-names: + items: + - const: u3phy-otg + description: USB 3.0 PHY UTMI + - const: u3phy-pipe + description: USB 3.0 PHY Pipe + + resets: + maxItems: 6 + + reset-names: + items: + - const: u3phy-u2-por + description: USB 2.0 logic of USB 3.0 PHY + - const: u3phy-u3-por + description: USB 3.0 logic of USB 3.0 PHY + - const: u3phy-pipe-mac + description: USB 3.0 PHY pipe MAC + - const: u3phy-utmi-mac + description: USB 3.0 PHY utmi MAC + - const: u3phy-utmi-apb + description: USB 3.0 PHY utmi apb + - const: u3phy-pipe-apb + description: USB 3.0 PHY pipe apb + + "#phy-cells": + const: 1 + + rockchip,u3phygrf: + $ref: /schemas/types.yaml#/definitions/phandle-array + type: array + - description: phandle to the syscon managing the + "USB 3.0 PHY general register files". + + vbus-drv-gpios: + $ref: /schemas/types.yaml#/definitions/phandle-array + type: array + - description: phandle for gpio vbus supply + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - resets + - reset-names + - "#phy-cells" + - rockchip,u3phygrf + +patternProperties: + "^u3phy_utmi@[0-9a-f]+$": + type: object + + properties: + - description: USB 2.0 utmi phy. + + rockchip,odt-val-tuning: + type: boolean + - description: specify 45ohm ODT tuning value. + + "phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +patternProperties: + "^u3phy_pipe@[0-9a-f]+$": + type: object + + properties: + - description: USB 3.0 pipe phy. + + rockchip,refclk-25m-quirk : + + - description: phy reference clock changed to 25m quirk. + + "phy-cells": + const: 0 + + required: + - reg + - "#phy-cells" + +examples: + +usb3phy_grf: syscon@ff460000 { + compatible = "rockchip,usb3phy-grf", "syscon"; + reg = <0x0 0xff460000 0x0 0x1000>; +}; + +... + +u3phy: usb3-phy@ff470000 { + compatible = "rockchip,rk3328-u3phy"; + reg = <0x0 0xff470000 0x0 0x0>; + rockchip,u3phygrf = <&usb3phy_grf>; + interrupts = ; + interrupt-names = "linestate"; + clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>; + clock-names = "u3phy-otg", "u3phy-pipe"; + resets = <&cru SRST_USB3PHY_U2>, + <&cru SRST_USB3PHY_U3>, + <&cru SRST_USB3PHY_PIPE>, + <&cru SRST_USB3OTG_UTMI>, + <&cru SRST_USB3PHY_OTG_P>, + <&cru SRST_USB3PHY_PIPE_P>; + reset-names = "u3phy-u2-por", "u3phy-u3-por", + "u3phy-pipe-mac", "u3phy-utmi-mac", + "u3phy-utmi-apb", "u3phy-pipe-apb"; + vbus-drv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + u3phy_utmi: utmi@ff470000 { + reg = <0x0 0xff470000 0x0 0x8000>; + #phy-cells = <0>; + }; + + u3phy_pipe: pipe@ff478000 { + reg = <0x0 0xff478000 0x0 0x8000>; + #phy-cells = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml index ada5435ce2c3..5f2f19344cc7 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml @@ -34,6 +34,7 @@ - rockchip,rk3308-usb2phy-grf - rockchip,rk3328-grf - rockchip,rk3328-usb2phy-grf + - rockchip,rk3328-u3phy-grf - rockchip,rk3368-grf - rockchip,rk3368-pmugrf - rockchip,rk3399-grf diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 31cc1541f1f5..072e988ad655 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -805,6 +805,47 @@ }; }; + usb3phy_grf: syscon@ff460000 { + compatible = "rockchip,usb3phy-grf", "syscon"; + reg = <0x0 0xff460000 0x0 0x1000>; + }; + + u3phy: usb3-phy@ff470000 { + compatible = "rockchip,rk3328-u3phy"; + reg = <0x0 0xff470000 0x0 0x0>; + rockchip,u3phygrf = <&usb3phy_grf>; + rockchip,grf = <&grf>; + interrupts = ; + interrupt-names = "linestate"; + clocks = <&cru PCLK_USB3PHY_OTG>, <&cru PCLK_USB3PHY_PIPE>; + clock-names = "u3phy-otg", "u3phy-pipe"; + resets = <&cru SRST_USB3PHY_U2>, + <&cru SRST_USB3PHY_U3>, + <&cru SRST_USB3PHY_PIPE>, + <&cru SRST_USB3OTG_UTMI>, + <&cru SRST_USB3PHY_OTG_P>, + <&cru SRST_USB3PHY_PIPE_P>; + reset-names = "u3phy-u2-por", "u3phy-u3-por", + "u3phy-pipe-mac", "u3phy-utmi-mac", + "u3phy-utmi-apb", "u3phy-pipe-apb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u3phy_utmi: utmi@ff470000 { + reg = <0x0 0xff470000 0x0 0x8000>; + #phy-cells = <0>; + status = "disabled"; + }; + + u3phy_pipe: pipe@ff478000 { + reg = <0x0 0xff478000 0x0 0x8000>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + sdmmc: mmc@ff500000 { compatible = "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff500000 0x0 0x4000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts index bb40c163b05d..f300f3d0f02e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts @@ -328,6 +328,18 @@ status = "okay"; }; +&u3phy { + status = "okay"; +}; + +&u3phy_utmi { + status = "okay"; +}; + +&u3phy_pipe { + status = "okay"; +}; + &uart2 { status = "okay"; }; @@ -344,6 +356,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &vop { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 62936b432..f97446924 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -383,6 +383,18 @@ status = "okay"; }; +&u3phy { + status = "okay"; +}; + +&u3phy_utmi { + status = "okay"; +}; + +&u3phy_pipe { + status = "okay"; +}; + &usb_host0_ehci { status = "okay"; }; @@ -391,6 +403,11 @@ status = "okay"; }; +&usbdrd3 { + dr_mode = "host"; + status = "okay"; +}; + &vop { status = "okay"; };