# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

# default values

setenv load_addr "0x12000000"
setenv ramdisk_addr "0x14800000"
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv console "both"
setenv bootlogo "false"
setenv disp_mode "1920x1080M60"
setenv rootfstype "ext4"
setenv earlycon "off"

# Print boot source
echo "Booting from SD"

if ext4load mmc 0 ${load_addr} /boot/armbianEnv.txt || fatload mmc 0 ${load_addr} armbianEnv.txt; then
	env import -t ${load_addr} ${filesize}
fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttymxc1,115200 console=tty1"; fi
if test "${console}" = "serial"; then setenv consoleargs "console=ttymxc1,115200"; fi
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
if test "${bootlogo}" = "true"; then
	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
else
	setenv consoleargs "splash=verbose ${consoleargs}"
fi

setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} video=mxcfb0:dev=hdmi,${disp_mode},if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 vt.global_cursor_default=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
run findfdt
ext4load mmc 0 ${ramdisk_addr} /boot/uInitrd || fatload mmc 0 ${ramdisk_addr} uInitrd || ext4load mmc 0 ${ramdisk_addr} uInitrd
ext4load mmc 0 ${loadaddr} /boot/zImage || fatload mmc 0 ${loadaddr} zImage
ext4load mmc 0 ${fdt_addr} /boot/dtb/${fdt_file} || fatload mmc 0 ${fdt_addr} dtb/${fdt_file}
bootz ${loadaddr} ${ramdisk_addr} ${fdt_addr}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr