From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 6 Mar 2023 09:31:38 +0100 Subject: dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected The BPI-CM4 module with an Amlogic A311D SoC is a module compatible with the Raspberry Pi CM4 specifications. Document the boards using this module, by specifying the BananaPi CM4 compatible in addition to the baseboard compatible. Acked-by: Krzysztof Kozlowski Reviewed-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-1-2ecfde76fc4d@linaro.org Signed-off-by: Neil Armstrong --- Documentation/devicetree/bindings/arm/amlogic.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml index e16b5fa55847..30b27917a8be 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.yaml +++ b/Documentation/devicetree/bindings/arm/amlogic.yaml @@ -157,6 +157,14 @@ properties: - const: amlogic,a311d - const: amlogic,g12b + - description: Boards using the BPI-CM4 module with Amlogic Meson G12B A311D SoC + items: + - enum: + - bananapi,bpi-cm4io + - const: bananapi,bpi-cm4 + - const: amlogic,a311d + - const: amlogic,g12b + - description: Boards with the Amlogic Meson G12B S922X SoC items: - enum: -- Armbian From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Mon, 6 Mar 2023 09:31:39 +0100 Subject: arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard Add support for both the BananaPi BPI-CM4 module and the BananaPi baseboard which is comnpatible with the RaspberryPi CM4IO baseboard. The BananaPi BPI-CM4 module follows the CM4 specifications at [1], but with a single HDMI port and a since DSI output. The current CM4IO baseboard DT should work fine on the Raspberry CM4 baseboard and other derivatives baseboards, but proper DT should be written for other baseboards. The split is done so it's easy to describe a new CM4 baseboard, enabling only the necessary HW used on the baseboard. [1] https://datasheets.raspberrypi.com/cm4io/cm4io-datasheet.pdf Tested-by: Christian Hewitt Reviewed-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20230303-topic-amlogic-upstream-bpi-cm4-v2-2-2ecfde76fc4d@linaro.org Signed-off-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 165 ++++ arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 388 ++++++++++ 3 files changed, 554 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 97b42e2100e0..d4b315a05ef9 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb --- /dev/null 2023-05-21 09:58:01.101444638 -0400 +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts 2023-05-29 07:19:26.254573254 -0400 @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong + */ + +/dts-v1/; + +#include "meson-g12b-bananapi-cm4.dtsi" +#include +#include +#include + +/ { + compatible = "bananapi,bpi-cm4io", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b"; + model = "BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module"; + + aliases { + ethernet0 = ðmac; + i2c0 = &i2c1; + i2c1 = &i2c3; + }; + + reboot: meson64-reboot { + compatible = "meson64,reboot"; + sys_reset = <0x84000009>; + sys_poweroff = <0x84000008>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = ; + press-threshold-microvolt = <10000>; + }; + }; + + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led-green { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "BPI-CM4IO"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&cecb_AO { + status = "okay"; +}; + +ðmac { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +/* CSI port */ +&i2c1 { + status = "okay"; +}; + +/* DSI port for touchscreen */ +&i2c3 { + status = "okay"; +}; + +/* miniPCIe port with USB + SIM slot */ +&pcie { + status = "okay"; +}; + +&sd_emmc_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +/* Peripheral Only USB-C port */ +&usb { + dr_mode = "peripheral"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi new file mode 100644 index 000000000000..97e522921b06 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2023 Neil Armstrong + */ + +#include "meson-g12b-a311d.dtsi" +#include + +/ { + aliases { + serial0 = &uart_AO; + rtc1 = &vrtc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOAO_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + emmc_1v8: regulator-emmc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + dc_in: regulator-dc-in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddio_c: regulator-vddio-c { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_C"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + enable-gpio = <&gpio_ao GPIOAO_3 GPIO_OPEN_DRAIN>; + enable-active-high; + regulator-always-on; + + gpios = <&gpio_ao GPIOAO_9 GPIO_OPEN_DRAIN>; + gpios-states = <1>; + + states = <1800000 0>, + <3300000 1>; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1040000>; + + pwm-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +/* Ethernet to be enabled in baseboard DT */ +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-mode = "rgmii-txid"; + phy-handle = <&external_phy>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +/* HDMI to be enabled in baseboard DT */ +&hdmi_tx { + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&dc_in>; +}; + +/* "Camera" I2C bus */ +&i2c1 { + pinctrl-0 = <&i2c1_sda_h6_pins>, <&i2c1_sck_h7_pins>; + pinctrl-names = "default"; +}; + +/* Main I2C bus */ +&i2c2 { + pinctrl-0 = <&i2c2_sda_x_pins>, <&i2c2_sck_x_pins>; + pinctrl-names = "default"; +}; + +/* "ID" I2C bus */ +&i2c3 { + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pcie { + reset-gpios = <&gpio GPIOA_8 GPIO_ACTIVE_LOW>; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + + status = "okay"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + + status = "okay"; +}; + +&saradc { + vref-supply = <&vddao_1v8>; + + status = "okay"; +}; + +/* on-module SDIO WiFi */ +&sd_emmc_a { + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + sd-uhs-sdr104; + max-frequency = <50000000>; + + non-removable; + disable-wp; + + /* WiFi firmware requires power in suspend */ + keep-power-in-suspend; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; + + status = "okay"; + + rtl8822cs: wifi@1 { + reg = <1>; + }; +}; + +/* SD card to be enabled in baseboard DT */ +&sd_emmc_b { + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_c>; +}; + +/* on-module eMMC */ +&sd_emmc_c { + pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +/* on-module UART BT */ +&uart_A { + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8822cs-bt"; + enable-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + //host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>; + device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; + }; +}; + +&uart_AO { + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb { + phys = <&usb2_phy0>, <&usb2_phy1>; + phy-names = "usb2-phy0", "usb2-phy1"; +}; -- Armbian