From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 11 Jan 2021 15:53:55 +0100 Subject: arm64: dts: meson: g12b: odroid-n2: add fan as cooling device Add the GPIO fan as a cooling device for the CPU thermal zone. Since we have only full fan speed available with this, set the tripping point to 30 degrees Celsius. Signed-off-by: Stefan Agner --- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 38 ++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index e896bac3c5c1..2db95373261c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -385,6 +385,44 @@ &clkc_audio { status = "okay"; }; +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + hysteresis = <5000>; + temperature = <30000>; + type = "active"; + }; + }; + + cooling-maps { + map0 { + cooling-device = + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + trip = <&cpu_warm>; + }; + map1 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &cpu0 { cpu-supply = <&vddcpu_b>; operating-points-v2 = <&cpu_opp_table_0>; -- Armbian