diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index de19e68eb..e1514bb68 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -4,6 +4,7 @@
 /dts-v1/;
 
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 
@@ -30,33 +31,55 @@ hdmi_con_in: endpoint {
 		};
 	};
 
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+		post-power-on-delay-ms = <200>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
 		pwr {
 			label = "orangepi:green:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			linux,default-trigger = "default-on";
 		};
 
 		status {
 			label = "orangepi:red:status";
-			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	reg_vcc3v3: vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
+	reg_vdd_cpux: gpio-regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-cpux";
+		regulator-type = "voltage";
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1307810>;
+		regulator-ramp-delay = <50>; /* 4ms */
+//		enable-gpios =  <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+		gpios = <&r_pio 0 6 0>; /* PL6 */
+		enable-active-high;
+		gpios-states = <0x1>;
+		states = <1108475 0x0
+			  1307810 0x1>;
 	};
+};
 
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
-		post-power-on-delay-ms = <200>;
-	};
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
 };
 
 &de {
@@ -141,3 +164,12 @@ &usb_otg {
 &usbphy {
 	status = "okay";
 };
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};