From 6b921f916b560f61c67689196035416e20958c1a Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Sat, 9 Nov 2019 23:55:48 +0100 Subject: [PATCH 016/351] ARM: dts: sun8i-a83t-tbs-a711: Add support for the vibrator motor The board has a vibrator mottor. Hook it to the input subsystem. According to the PMIC specification, LDO needs to be enabled (value 0b11) to achieve the specified max driving current of 150mA. We can't drive the motor with just GPIO mode. In GPIO mode the chip is probably just using the regular CMOS logic output circuitry (typically limited to around 20-35mA, but not specified in this datasheet). Signed-off-by: Ondrej Jirman --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 9029e6ad461b..189e21b80d68 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -99,6 +99,11 @@ panel_input: endpoint { }; }; + vibrator { + compatible = "gpio-vibrator"; + vcc-supply = <®_ldo_io1>; + }; + reg_gps: reg-gps { compatible = "regulator-fixed"; regulator-name = "gps"; -- 2.34.0