From 8fda047a66f02d2a554b3315bf4dc47688061355 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Tue, 2 Aug 2022 09:37:05 +0200 Subject: [PATCH 315/389] power: supply: rk818-charger: Delay applying input current limit until first BC detection finishes When the phone boots for the first time, we only want to react to changes in charger power supply max current after the USB power supply type detection finishes. This allows us to keep the limit set by the bootloader, until we know better. This is part of the workaround for Pinephone Pro boot loops on low battery. The other part is bootloader raising the input current limit to 2A. Signed-off-by: Ondrej Jirman --- drivers/power/supply/rk818_charger.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/power/supply/rk818_charger.c b/drivers/power/supply/rk818_charger.c index 16bc4686b547..979165c98e5a 100644 --- a/drivers/power/supply/rk818_charger.c +++ b/drivers/power/supply/rk818_charger.c @@ -51,6 +51,8 @@ struct rk818_charger { struct power_supply *usb_psy; struct power_supply *charger_psy; + + bool apply_ilim; }; // {{{ USB supply @@ -72,6 +74,8 @@ static int rk818_usb_set_input_current_max(struct rk818_charger *cg, else reg = 11; + dev_info(cg->dev, "applying input current limit %d mA\n", val / 1000); + ret = regmap_update_bits(cg->regmap, RK818_USB_CTRL_REG, RK818_USB_CTRL_USB_ILIM_MASK, reg); if (ret) @@ -242,6 +246,19 @@ static void rk818_usb_power_external_power_changed(struct power_supply *psy) if (ret) return; + /* + * We only want to start applying input current limit after we get first + * non-0 value from the supplier. Until then, we keep the limit applied + * by the bootloader. If we lower the limit before the charger is properly + * detected, we risk boot failure due to insufficient power. + */ + if (!cg->apply_ilim) { + if (!val.intval) + return; + + cg->apply_ilim = true; + } + if (val.intval < 500000) val.intval = 500000; -- 2.35.3