From 737f98368070e95551beabf7fe192fd2ecfe73b1 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Wed, 27 Apr 2022 07:06:10 +0200 Subject: [PATCH 112/391] usb: musb: sunxi: Avoid enabling host side code on SoCs where it's not used For some sunxi SoCs host side code is active but unused, because phy re-routes USB handling to a regular EHCI/OHCI driver. When host side code of musb is left initialized it sometimes interferes with suspend to RAM. Disabling the host side code on SoCs that re-route host mode to a regular *HCI hardware block fixes the issue. Issue: https://gitlab.com/postmarketOS/pmaports/-/issues/1478 Signed-off-by: Ondrej Jirman --- drivers/usb/musb/musb_core.c | 10 ++++++++++ drivers/usb/musb/sunxi.c | 29 ++++++++++++++++++++++------- 2 files changed, 32 insertions(+), 7 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 648bb6021..42f0f9763 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -975,6 +975,16 @@ static void musb_handle_intr_disconnect(struct musb *musb, u8 devctl) case OTG_STATE_B_IDLE: musb_g_disconnect(musb); break; + case OTG_STATE_A_WAIT_VRISE: + /* + * For sunxi use case, where host side of the musb driver + * is not used for host mode, we want to ignore + * OTG_STATE_A_WAIT_VRISE state set in sunxi glue code + * when transitioning to host mode on disconnect, in + * order to not confuse the dmesg reader about possible + * issues. + */ + break; default: WARNING("unhandled DISCONNECT transition (%s)\n", musb_otg_state_string(musb)); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index 7f9a999cd..fcd3159a9 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -345,12 +345,6 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode) if (glue->phy_mode == new_mode) return 0; - if (musb->port_mode != MUSB_OTG) { - dev_err(musb->controller->parent, - "Error changing modes is only supported in dual role mode\n"); - return -EINVAL; - } - if (musb->port1_status & USB_PORT_STAT_ENABLE) musb_root_disconnect(musb); @@ -670,13 +664,21 @@ static struct musb_hdrc_config sunxi_musb_hdrc_config_h3 = { .ram_bits = SUNXI_MUSB_RAM_BITS, }; +static const char * const sunxi_musb_host_rerouted_phys[] = { + "allwinner,sun8i-h3-usb-phy", + "allwinner,sun8i-r40-usb-phy", + "allwinner,sun8i-v3s-usb-phy", + "allwinner,sun50i-a64-usb-phy", + "allwinner,sun50i-h6-usb-phy", + NULL, +}; static int sunxi_musb_probe(struct platform_device *pdev) { struct musb_hdrc_platform_data pdata; struct platform_device_info pinfo; struct sunxi_glue *glue; - struct device_node *np = pdev->dev.of_node; + struct device_node *np = pdev->dev.of_node, *phy_np; int ret; if (!np) { @@ -758,6 +760,19 @@ static int sunxi_musb_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, PTR_ERR(glue->phy), "Error getting phy\n"); + /* + * Host mode is handled outside of the musb driver on some allwinner + * SoCs. We don't need musb host side code to be enabled at all. + * In fact it causes occasional issues with suspend to ram, when + * the host side code is enabled and unused (due to phy being re-routed + * to a different *HCI controller). + */ + phy_np = glue->phy->dev.of_node; + if (of_device_compatible_match(phy_np, sunxi_musb_host_rerouted_phys)) { + dev_info(&pdev->dev, "Disabling musb host side code due to re-routed phy\n"); + pdata.mode = MUSB_PERIPHERAL; + } + glue->usb_phy = usb_phy_generic_register(); if (IS_ERR(glue->usb_phy)) { dev_err(&pdev->dev, "Error registering usb-phy %ld\n", -- 2.35.3