From 95aaaed863b32bcbd4463d1c8df7e51e514bbda6 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Sun, 4 Sep 2022 23:11:02 +0200 Subject: [PATCH 278/391] arm64: dts: rk3399-pinephone-pro: Add internal display support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The phone's display is using Hannstar LCD panel, and Goodix based touchscreen. Support it. Signed-off-by: Martijn Braam Co-developed-by: Kamil Trzciński Signed-off-by: Ondrej Jirman --- .../dts/rockchip/rk3399-pinephone-pro.dts | 124 ++++++++++++++++++ 1 file changed, 124 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index fc69aa9dd..f6f82fd92 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -51,6 +51,12 @@ button-down { }; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 1000000 0>; + pwm-delay-us = <10000>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -154,6 +160,32 @@ wifi_pwrseq: sdio-wifi-pwrseq { /* WL_REG_ON on module */ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; }; + + /* MIPI DSI panel 1.8v supply */ + vcc1v8_lcd: vcc1v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&display_pwren1>; + }; + + /* MIPI DSI panel 2.8v supply */ + vcc2v8_lcd: vcc2v8-lcd { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc2v8_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <&vcc3v3_sys>; + gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&display_pwren>; + }; }; &cpu_alert0 { @@ -191,6 +223,11 @@ &emmc_phy { status = "okay"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -273,6 +310,9 @@ vcc3v0_touch: LDO_REG2 { regulator-name = "vcc3v0_touch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; }; vcca1v8_codec: LDO_REG3 { @@ -406,6 +446,27 @@ opp07 { }; }; +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt917s"; + reg = <0x14>; + interrupt-parent = <&gpio3>; + interrupts = ; + use-dt-irq-flags; + irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vcc3v0_touch>; + VDDIO-supply = <&vcc3v0_touch>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + poweroff-in-suspend; + }; +}; + &io_domains { bt656-supply = <&vcc1v8_dvp>; audio-supply = <&vcca1v8_codec>; @@ -414,6 +475,40 @@ &io_domains { status = "okay"; }; +&mipi_dsi { + status = "okay"; + clock-master; + + ports { + mipi_out: port@1 { + #address-cells = <0>; + #size-cells = <0>; + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "hannstar,hsd060bhw4"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>; + vcc-supply = <&vcc2v8_lcd>; // 2v8 + iovcc-supply = <&vcc1v8_lcd>; // 1v8 + pinctrl-names = "default"; + pinctrl-0 = <&display_rst_l>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_1v8>; status = "okay"; @@ -426,6 +521,20 @@ pwrbtn_pin: pwrbtn-pin { }; }; + dsi { + display_rst_l: display-rst-l { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + display_pwren: display-pwren { + rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + display_pwren1: display-pwren1 { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + leds { red_led_pin: red-led-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -495,6 +604,10 @@ &sdio0 { status = "okay"; }; +&pwm0 { + status = "okay"; +}; + &saradc { vref-supply = <&vcca1v8_s3>; status = "okay"; @@ -560,3 +673,14 @@ bluetooth { &uart2 { status = "okay"; }; + +&vopb { + status = "okay"; + assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>, <&cru ACLK_VOP0>, <&cru HCLK_VOP0>; + assigned-clock-rates = <0>, <0>, <400000000>, <100000000>; + assigned-clock-parents = <&cru PLL_CPLL>, <&cru DCLK_VOP0_FRAC>; +}; + +&vopb_mmu { + status = "okay"; +}; -- 2.35.3