From 89e1641a01dc259fb77eb96ca4147be242701877 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= Date: Wed, 8 Apr 2020 14:13:08 +0200 Subject: [PATCH 088/464] arm64: dts: sun50i-a64-pinephone: Add front/back cameras Pinephone has OV5640 back camera and GC2145 front camera. Add support for both. Signed-off-by: Ondrej Jirman --- .../dts/allwinner/sun50i-a64-pinephone.dtsi | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 87847116ab6d..92e77503b591 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -36,6 +36,15 @@ chosen { stdout-path = "serial0:115200n8"; }; + i2c_csi: i2c-csi { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PE13 */ + scl-gpios = <&pio 4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PE12 */ + i2c-gpio,delay-us = <3>; + #address-cells = <1>; + #size-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -124,6 +133,36 @@ &cpu3 { cpu-supply = <®_dcdc2>; }; +&csi { + pinctrl-0 = <&csi_pins>, <&csi_mclk_pin>; + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi_ov5640_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + + csi_gc2145_ep: endpoint@1 { + reg = <1>; + remote-endpoint = <&gc2145_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + pclk-sample = <1>; + }; + }; +}; + &dai { status = "okay"; }; @@ -158,6 +197,56 @@ &ehci1 { status = "okay"; }; +&i2c_csi { + gc2145: front-camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_dldo3>; + DVDD-supply = <®_aldo1>; + IOVDD-supply = <®_eldo3>; + reset-gpios = <&pio 4 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE16 */ + enable-gpios = <&pio 4 17 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE17 */ + + port { + gc2145_ep: endpoint { + remote-endpoint = <&csi_gc2145_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + data-active = <1>; + pclk-sample = <1>; + }; + }; + }; + + ov5640: rear-camera@4c { + compatible = "ovti,ov5640"; + reg = <0x4c>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_dldo3>; + DOVDD-supply = <®_aldo1>; /* shared with AFVCC */ + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 3 3 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PD3 */ + powerdown-gpios = <&pio 2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* PC0 */ + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; +}; + &i2c0 { status = "okay"; -- 2.34.1