From 2f87910200f6cef67540ccb01da8510ddb41051b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= Date: Sun, 30 Jan 2022 23:44:42 +0100 Subject: [PATCH 344/464] phy: phy-rockchip-inno-usb2: Decrease delay between port init and charger detection When used on systems with TCPM, the charger detection via USB2.0 PHY will take too much time during boot, so the fusb302 driver will not be able to get the result, and will set incorrect current_max on its power supply device. This will lead to failure to charge when the device is powered up while connected to non-PD charger. Decreasing delay of otg_sm_work from 6s to 500ms ensures that port type detection via the PHY will finish well in time for TCPM to be able to use its result when Rp=default is detected via CC pins. Signed-off-by: Ondrej Jirman --- drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c index a0bc10aa7961..490cce6e1d40 100644 --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c @@ -443,7 +443,7 @@ static int rockchip_usb2phy_init(struct phy *phy) goto out; schedule_delayed_work(&rport->otg_sm_work, - OTG_SCHEDULE_DELAY * 3); + msecs_to_jiffies(500)); } else { /* If OTG works in host only mode, do nothing. */ dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); -- 2.34.1