diff --git a/arch/arm/dts/rk322x-box.dts b/arch/arm/dts/rk322x-box.dts
new file mode 100755
index 00000000..eb47f976
--- /dev/null
+++ b/arch/arm/dts/rk322x-box.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk322x-generic-tvbox.dtsi"
+
+/ {
+	model = "Generic Rockchip rk322x TV Box board";
+	compatible = "rockchip,rk322x-box";
+
+};
+
+&leds {
+
+	/*
+		Alternative led: some boards which have main led wired
+		as ACTIVE_LOW will not show anything during boot, thus
+		we put this gpio led as ACTIVE_HIGH, so at least one
+		may give some hint during boot.
+		Schematics say that this pin is connected to I2C0 data
+		bus, which is usually unused on rk322x boards
+	*/
+
+	alt {
+		label = "alternative";
+		gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		default-state = "on";
+        };
+
+};
+
+&gmac {
+
+	tx_delay = < 0x26 >; // Default is 0x30, but original dts proposes 0x26
+	rx_delay = < 0x11 >; // Default is 0x10, but original dts proposes 0x11
+	status = "okay";
+
+};
+
+&emmc {
+
+	status = "okay";
+
+};
+
+&sdmmc {
+	cd-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+};
+
+&pinctrl {
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio_leds>;
+
+	gpio {
+		gpio_leds: gpio-leds {
+			rockchip,pins = <3 21 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+
+};