72 lines
2.6 KiB
Batchfile
72 lines
2.6 KiB
Batchfile
# DO NOT EDIT THIS FILE
|
|
#
|
|
# Please edit /boot/armbianEnv.txt to set supported parameters
|
|
#
|
|
|
|
# default values
|
|
setenv load_addr "0x45000000"
|
|
setenv rootdev "/dev/mmcblk0p1"
|
|
setenv verbosity "1"
|
|
setenv rootfstype "ext4"
|
|
setenv console "both"
|
|
setenv docker_optimizations "off"
|
|
setenv bootlogo "false"
|
|
|
|
# Print boot source
|
|
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
|
|
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
|
|
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"
|
|
|
|
echo "Boot script loaded from ${devtype}"
|
|
|
|
if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
|
|
load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
|
|
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
|
|
if test "${bootlogo}" = "true"; then
|
|
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
|
else
|
|
setenv consoleargs "splash=verbose ${consoleargs}"
|
|
fi
|
|
|
|
# get PARTUUID of first partition on SD/eMMC it was loaded from
|
|
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
|
|
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi
|
|
|
|
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} disp_reserve=${disp_reserve} ${extraargs} ${extraboardargs}"
|
|
|
|
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi
|
|
|
|
#load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
#fdt addr -c ${fdt_addr_r}
|
|
#fdt addr ${fdt_addr_r}
|
|
#fdt resize 65536
|
|
|
|
fdt set disp boot_fb0 ${boot_fb0}
|
|
fdt set disp boot_disp <${boot_disp}>
|
|
fdt set disp boot_disp1 <${boot_disp1}>
|
|
fdt set disp boot_disp2 <${boot_disp2}>
|
|
fdt set disp tv_vdid <${tv_vdid}>
|
|
|
|
fdt set disp fb0_width <${fb0_width}>
|
|
fdt set disp fb0_height <${fb0_height}>
|
|
|
|
for overlay_file in ${user_overlays}; do
|
|
if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
|
|
echo "Applying user provided DT overlay ${overlay_file}.dtbo"
|
|
fdt apply ${load_addr} || setenv overlay_error "true"
|
|
fi
|
|
done
|
|
|
|
# Legacy uboot, requires uImage - see pre_package_kernel_image__orangepi_legacy_uImage_manual_conversion()
|
|
load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
|
|
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}uImage
|
|
|
|
bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|