aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
build/patch/kernel/archive/rk322x-6.3/board-rk322x-box.patch

773 lines
15 KiB
Diff
Raw Permalink Blame History

diff --git a/arch/arm/boot/dts/rk322x-box.dts b/arch/arm/boot/dts/rk322x-box.dts
new file mode 100644
index 00000000000..a498bad3a4f
--- /dev/null
+++ b/arch/arm/boot/dts/rk322x-box.dts
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk322x.dtsi"
+
+/ {
+
+ model = "Generic RK322x Tv Box board";
+ compatible = "rockchip,rk3229";
+
+ /*
+ * No need to reserve memory manually as long as u-boot v2020.10 and
+ * OPTEE autoconfigure the reserved zones
+ */
+ /delete-node/ reserved-memory;
+
+ /*
+ * We rebuild the cpu-opp-table by ourselves
+ */
+ /delete-node/ opp-table-0;
+
+ /*
+ * Rebuild the thermal zones and cooling maps ourselved
+ */
+ /delete-node/ thermal-zones;
+
+ /*
+ * Include the mmc devices into aliases table
+ */
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdio;
+ mmc2 = &emmc;
+ };
+
+ analog-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,name = "analog";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&codec>;
+ };
+ };
+
+ chosen {
+ bootargs = "earlyprintk=uart8250,mmio32,0x11030000";
+ };
+
+ cpu0_opp_table: opp-table-0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1000000>;
+ };
+
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1175000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1275000>;
+ };
+
+ };
+
+ gpio_leds: gpio-leds {
+
+ compatible = "gpio-leds";
+
+ /*
+ * Working led, available on all boards
+ */
+ working {
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+ label = "working";
+ default-state = "on";
+ linux,default-trigger = "timer";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_working>;
+ };
+
+ };
+
+ gpio_keys: gpio-keys {
+
+ compatible = "gpio-keys";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ };
+
+ ir_receiver: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ status = "okay";
+ linux,rc-map-name = "rc-rk322x-tvbox";
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ reset-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_LOW>;
+ };
+
+
+ spdif_out: spdif-out {
+ status = "okay";
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif-sound {
+ status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ vcc_sys: vcc-sys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vcc_host: vcc-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vccio_1v8: vccio-1v8-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vccio_3v3: vccio-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vccio_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_otg: vcc-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&otg_vbus_drv>;
+ regulator-name = "vcc_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vccio_1v8>;
+ };
+
+ vdd_arm: vdd-arm-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_log: vdd-log-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc_sys>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <95000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+
+ cpu_throttle_low: map-cpu-throttle-low {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 1>,
+ <&cpu1 THERMAL_NO_LIMIT 1>,
+ <&cpu2 THERMAL_NO_LIMIT 1>,
+ <&cpu3 THERMAL_NO_LIMIT 1>;
+ };
+
+ cpu_throttle_high: map-cpu-throttle-high {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ gpu_throttle_low: map-gpu-throttle-low {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT 1>;
+ };
+
+ gpu_throttle_high: map-gpu-throttle-high {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ dmc_throttle_low: map-dmc-throttle-low {
+ trip = <&cpu_alert0>;
+ cooling-device = <&dmc THERMAL_NO_LIMIT 1>;
+ };
+
+ dmc_throttle_high: map-dmc-throttle-high {
+ trip = <&cpu_alert1>;
+ cooling-device = <&dmc THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+
+ };
+ };
+ };
+
+};
+
+&codec {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cru {
+ assigned-clocks = <&cru PLL_GPLL>, <&cru ARMCLK>,
+ <&cru PLL_CPLL>, <&cru ACLK_PERI>,
+ <&cru HCLK_PERI>, <&cru PCLK_PERI>,
+ <&cru ACLK_CPU>, <&cru HCLK_CPU>,
+ <&cru PCLK_CPU>, <&cru ACLK_VOP>;
+
+ assigned-clock-rates = <1200000000>, <816000000>,
+ <500000000>, <150000000>,
+ <150000000>, <75000000>,
+ <150000000>, <150000000>,
+ <75000000>, <400000000>;
+};
+
+&dmc {
+ logic-supply = <&vdd_log>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ status = "okay";
+ /delete-property/ mmc-ddr-1_8v;
+ /delete-property/ pinctrl-names;
+ /delete-property/ pinctrl-0;
+ /delete-property/ rockchip,default-sample-phase;
+ rockchip,default-sample-phase = <90>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_SRC>;
+ assigned-clock-rates = <50000000>;
+ clock_in_out = "output";
+ phy-handle = <&phy>;
+ phy-mode = "rmii";
+ phy-supply = <&vcc_phy>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy: phy@0 {
+ compatible = "ethernet-phy-id1234.d400",
+ "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ clocks = <&cru SCLK_MAC_PHY>;
+ phy-is-integrated;
+ resets = <&cru SRST_MACPHY>;
+ };
+ };
+};
+
+&gpu {
+ assigned-clocks = <&cru ACLK_GPU>;
+ assigned-clock-rates = <300000000>;
+ mali-supply = <&vdd_log>;
+};
+
+&gpu_opp_table {
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1100000 1000000 1200000>;
+ };
+};
+
+&io_domains {
+ vccio1-supply = <&vccio_3v3>;
+ vccio2-supply = <&vccio_1v8>;
+ vccio4-supply = <&vccio_3v3>;
+ status = "okay";
+};
+
+&nfc {
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ pinctrl-names;
+ /delete-property/ pinctrl-0;
+
+ nand@0 {
+ reg = <0>;
+ label = "rk-nand";
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <60>;
+ nand-is-boot-medium;
+ rockchip,boot-blks = <8>;
+ rockchip,boot-ecc-strength = <60>;
+ };
+
+};
+
+&iep {
+ status = "okay";
+};
+
+&iep_mmu {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&hdmi_phy {
+ status = "okay";
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&i2s1 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+/** Integration to pin controller */
+&pinctrl {
+
+ pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+ drive-strength = <12>;
+ bias-pull-up;
+ };
+
+ pcfg_pull_down_12ma: pcfg-pull-down-12ma {
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ pcfg_pull_down_8ma: pcfg-pull-down-8ma {
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ pcfg_pull_down_2ma: pcfg-pull-down-2ma {
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ /*
+ * Some rk322x electrical schemes report this kind of pull-up/down
+ * pin configurations. We set them here, but we don't use it in this
+ * device tree. These instead are useful for overlays, because they seem
+ * to increase stability on at least one board I got here
+ */
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <1 16 1 &pcfg_pull_down>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <1 15 1 &pcfg_pull_up>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <1 18 1 &pcfg_pull_up>,
+ <1 19 1 &pcfg_pull_up>,
+ <1 20 1 &pcfg_pull_up>,
+ <1 21 1 &pcfg_pull_up>;
+ };
+ };
+
+ /*
+ * Same as above, decreasing strength of SDIO pins seems to be benefical
+ * to stability
+ */
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins = <3 0 1 &pcfg_pull_down_2ma>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins = <3 1 1 &pcfg_pull_up_2ma>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins = <3 2 1 &pcfg_pull_up_2ma>,
+ <3 3 1 &pcfg_pull_up_2ma>,
+ <3 4 1 &pcfg_pull_up_2ma>,
+ <3 5 1 &pcfg_pull_up_2ma>;
+ };
+ };
+
+ /*
+ * Same drill as above, electrical schemes also report this pull-up/down
+ * configurations.
+ */
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 7 2 &pcfg_pull_up>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <1 22 2 &pcfg_pull_up>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 2 &pcfg_pull_up>,
+ <1 25 2 &pcfg_pull_up>,
+ <1 26 2 &pcfg_pull_up>,
+ <1 27 2 &pcfg_pull_up>,
+ <1 28 2 &pcfg_pull_up>,
+ <1 29 2 &pcfg_pull_up>,
+ <1 30 2 &pcfg_pull_up>,
+ <1 31 2 &pcfg_pull_up>;
+ };
+
+ emmc_pwr: emmc-pwr {
+ rockchip,pins = <2 RK_PA5 2 &pcfg_pull_down>;
+ };
+
+ emmc_rst: emmc-rst {
+ rockchip,pins = <1 RK_PC7 2 &pcfg_pull_up>;
+ };
+
+ };
+
+ gpio {
+ gpio_led_working: gpio-led-working {
+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin_pull_down: pwm1-pin-pull-down {
+ rockchip,pins = <0 RK_PD6 2 &pcfg_pull_down>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin_pull_up: pwm2-pin-pull-up {
+ rockchip,pins = <1 RK_PB4 2 &pcfg_pull_up>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart11_xfer &uart11_rts &uart11_cts>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+ u2phy0_host: host-port {
+ phy-supply = <&vcc_host>;
+ };
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_otg>;
+ };
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy0_host {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+ u2phy1_host: host-port {
+ phy-supply = <&vcc_host>;
+ };
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc_otg>;
+ };
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&u2phy1_host {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usb_host2_ehci {
+ status = "okay";
+};
+
+&usb_host2_ohci {
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&sdio {
+ mmc-pwrseq = <&sdio_pwrseq>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ non-removable;
+ no-sd;
+ status = "okay";
+};
+
+&sdmmc {
+ cd-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
+ cd-debounce-delay-ms = <500>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ no-sdio;
+ status = "okay";
+};
+
+&spdif {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,grf = <&grf>;
+ rockchip,hw-tshut-mode = <0>;
+ rockchip,hw-tshut-polarity = <1>;
+ rockchip,hw-tshut-temp = <110000>;
+
+ /* delete the pinctrl-* properties because, on mainline kernel, they (in particular "default")
+ change the GPIO configuration of the associated PIN. On most boards that pin is not connected
+ so it does not do anything, but some other boards (X96-Mini) have that pin connected to
+ a reset pin of the soc or whatever, thus changing the configuration of the pin at boot
+ causes them to bootloop.
+ We don't really need these ones though, because since hw-tshut-mode is set to 0, the CRU
+ unit of the SoC does the reboot*/
+ /delete-property/ pinctrl-names;
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-1;
+ /delete-property/ pinctrl-2;
+
+ status = "okay";
+};
+
+&vop {
+ assigned-clocks = <&cru DCLK_VOP>;
+ assigned-clock-parents = <&cru SCLK_HDMI_PHY>;
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
Reference in New Issue View Git Blame Copy Permalink