aixiao/build
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
build/patch/kernel/archive/rockchip-6.4/01-linux-1002-for-libreelec.patch

689 lines
21 KiB
Diff
Raw Permalink Blame History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Wed, 2 Sep 2020 19:52:02 +0200
Subject: [PATCH] arm64: dts: rockchip: add gpu powerdomain, gpu opp-table and
cooling cell for RK3328
Note: since the regulator that supplies the GPU usually also supplies
other SoC components, we have to make sure voltage is never lower then
1075 mV - also disable 500 MHz for now, since it will crash if rkvdec
is running at the same time (voltage to high)
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
.../arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 4 +++
.../arm64/boot/dts/rockchip/rk3328-rock64.dts | 4 +++
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 35 +++++++++++++++++++
3 files changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index aa22a0c22265..51c7723d6762 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -166,6 +166,10 @@ &gmac2io {
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_logic>;
+};
+
&hdmi {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index f69a38f42d2d..c198a8a7f95a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -162,6 +162,10 @@ &gmac2io {
status = "okay";
};
+&gpu {
+ mali-supply = <&vdd_logic>;
+};
+
&hdmi {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 431c4ec198be..eec03adf0902 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -300,6 +300,11 @@ power: power-controller {
#address-cells = <1>;
#size-cells = <0>;
+ power-domain@RK3328_PD_GPU {
+ reg = <RK3328_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ #power-domain-cells = <0>;
+ };
power-domain@RK3328_PD_HEVC {
reg = <RK3328_PD_HEVC>;
#power-domain-cells = <0>;
@@ -539,6 +544,11 @@ map0 {
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <4096>;
};
+ map1 {
+ trip = <&target>;
+ cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ contribution = <4096>;
+ };
};
};
@@ -620,7 +630,32 @@ gpu: gpu@ff300000 {
"ppmmu1";
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
clock-names = "bus", "core";
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&power RK3328_PD_GPU>;
resets = <&cru SRST_GPU_A>;
+ #cooling-cells = <2>;
+ };
+
+ gpu_opp_table: gpu-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <1075000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1150000>;
+ status = "disabled";
+ };
};
h265e_mmu: iommu@ff330200 {
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Tue, 2 Feb 2021 17:22:21 +0200
Subject: [PATCH] ARM: dts: RK3288 miqi add hdmi sound nodes
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rk3288-miqi.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 713f55e143c6..8d30c49f406e 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -78,6 +78,21 @@ vcc_sys: vsys-regulator {
regulator-always-on;
regulator-boot-on;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "HDMI";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
};
&cpu0 {
@@ -284,6 +299,11 @@ &i2c5 {
status = "okay";
};
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
&io_domains {
status = "okay";
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Fri, 2 Apr 2021 17:54:22 +0200
Subject: [PATCH] ARM/arm64: dts: rockchip: align sound card names
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm/boot/dts/rk3288-tinker.dtsi | 2 +-
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index 09618bb7d872..db9106a3dd22 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -73,7 +73,7 @@ sdio_pwrseq: sdio-pwrseq {
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,name = "HDMI";
simple-audio-card,mclk-fs = <512>;
simple-audio-card,codec {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 093ebe070775..a10fe60b7680 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1893,7 +1893,7 @@ hdmi_sound: hdmi-sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "hdmi-sound";
+ simple-audio-card,name = "HDMI";
status = "disabled";
simple-audio-card,cpu {
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Sun, 25 Mar 2018 22:17:06 +0200
Subject: [PATCH] ASoC: hdmi-codec: fix channel allocation
---
sound/soc/codecs/hdmi-codec.c | 113 ++++++++++++++++------------------
1 file changed, 52 insertions(+), 61 deletions(-)
diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c
index 5679102de91f..f0cd183f7873 100644
--- a/sound/soc/codecs/hdmi-codec.c
+++ b/sound/soc/codecs/hdmi-codec.c
@@ -194,78 +194,69 @@ static const struct snd_pcm_chmap_elem hdmi_codec_8ch_chmaps[] = {
*/
static const struct hdmi_codec_cea_spk_alloc hdmi_codec_channel_alloc[] = {
{ .ca_id = 0x00, .n_ch = 2,
- .mask = FL | FR},
- /* 2.1 */
- { .ca_id = 0x01, .n_ch = 4,
- .mask = FL | FR | LFE},
- /* Dolby Surround */
+ .mask = FL | FR },
+ { .ca_id = 0x03, .n_ch = 4,
+ .mask = FL | FR | LFE | FC },
{ .ca_id = 0x02, .n_ch = 4,
.mask = FL | FR | FC },
- /* surround51 */
+ { .ca_id = 0x01, .n_ch = 4,
+ .mask = FL | FR | LFE },
{ .ca_id = 0x0b, .n_ch = 6,
- .mask = FL | FR | LFE | FC | RL | RR},
- /* surround40 */
- { .ca_id = 0x08, .n_ch = 6,
- .mask = FL | FR | RL | RR },
- /* surround41 */
- { .ca_id = 0x09, .n_ch = 6,
- .mask = FL | FR | LFE | RL | RR },
- /* surround50 */
+ .mask = FL | FR | LFE | FC | RL | RR },
{ .ca_id = 0x0a, .n_ch = 6,
.mask = FL | FR | FC | RL | RR },
- /* 6.1 */
- { .ca_id = 0x0f, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RL | RR | RC },
- /* surround71 */
+ { .ca_id = 0x09, .n_ch = 6,
+ .mask = FL | FR | LFE | RL | RR },
+ { .ca_id = 0x08, .n_ch = 6,
+ .mask = FL | FR | RL | RR },
+ { .ca_id = 0x07, .n_ch = 6,
+ .mask = FL | FR | LFE | FC | RC },
+ { .ca_id = 0x06, .n_ch = 6,
+ .mask = FL | FR | FC | RC },
+ { .ca_id = 0x05, .n_ch = 6,
+ .mask = FL | FR | LFE | RC },
+ { .ca_id = 0x04, .n_ch = 6,
+ .mask = FL | FR | RC },
{ .ca_id = 0x13, .n_ch = 8,
.mask = FL | FR | LFE | FC | RL | RR | RLC | RRC },
- /* others */
- { .ca_id = 0x03, .n_ch = 8,
- .mask = FL | FR | LFE | FC },
- { .ca_id = 0x04, .n_ch = 8,
- .mask = FL | FR | RC},
- { .ca_id = 0x05, .n_ch = 8,
- .mask = FL | FR | LFE | RC },
- { .ca_id = 0x06, .n_ch = 8,
- .mask = FL | FR | FC | RC },
- { .ca_id = 0x07, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RC },
- { .ca_id = 0x0c, .n_ch = 8,
- .mask = FL | FR | RC | RL | RR },
- { .ca_id = 0x0d, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | RC },
- { .ca_id = 0x0e, .n_ch = 8,
- .mask = FL | FR | FC | RL | RR | RC },
- { .ca_id = 0x10, .n_ch = 8,
- .mask = FL | FR | RL | RR | RLC | RRC },
- { .ca_id = 0x11, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | RLC | RRC },
+ { .ca_id = 0x1f, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | RL | RR | FLC | FRC },
{ .ca_id = 0x12, .n_ch = 8,
.mask = FL | FR | FC | RL | RR | RLC | RRC },
- { .ca_id = 0x14, .n_ch = 8,
- .mask = FL | FR | FLC | FRC },
- { .ca_id = 0x15, .n_ch = 8,
- .mask = FL | FR | LFE | FLC | FRC },
- { .ca_id = 0x16, .n_ch = 8,
- .mask = FL | FR | FC | FLC | FRC },
- { .ca_id = 0x17, .n_ch = 8,
- .mask = FL | FR | LFE | FC | FLC | FRC },
- { .ca_id = 0x18, .n_ch = 8,
- .mask = FL | FR | RC | FLC | FRC },
- { .ca_id = 0x19, .n_ch = 8,
- .mask = FL | FR | LFE | RC | FLC | FRC },
- { .ca_id = 0x1a, .n_ch = 8,
- .mask = FL | FR | RC | FC | FLC | FRC },
- { .ca_id = 0x1b, .n_ch = 8,
- .mask = FL | FR | LFE | RC | FC | FLC | FRC },
- { .ca_id = 0x1c, .n_ch = 8,
- .mask = FL | FR | RL | RR | FLC | FRC },
- { .ca_id = 0x1d, .n_ch = 8,
- .mask = FL | FR | LFE | RL | RR | FLC | FRC },
{ .ca_id = 0x1e, .n_ch = 8,
.mask = FL | FR | FC | RL | RR | FLC | FRC },
- { .ca_id = 0x1f, .n_ch = 8,
- .mask = FL | FR | LFE | FC | RL | RR | FLC | FRC },
+ { .ca_id = 0x11, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | RLC | RRC },
+ { .ca_id = 0x1d, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | FLC | FRC },
+ { .ca_id = 0x10, .n_ch = 8,
+ .mask = FL | FR | RL | RR | RLC | RRC },
+ { .ca_id = 0x1c, .n_ch = 8,
+ .mask = FL | FR | RL | RR | FLC | FRC },
+ { .ca_id = 0x0f, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | RL | RR | RC },
+ { .ca_id = 0x1b, .n_ch = 8,
+ .mask = FL | FR | LFE | RC | FC | FLC | FRC },
+ { .ca_id = 0x0e, .n_ch = 8,
+ .mask = FL | FR | FC | RL | RR | RC },
+ { .ca_id = 0x1a, .n_ch = 8,
+ .mask = FL | FR | RC | FC | FLC | FRC },
+ { .ca_id = 0x0d, .n_ch = 8,
+ .mask = FL | FR | LFE | RL | RR | RC },
+ { .ca_id = 0x19, .n_ch = 8,
+ .mask = FL | FR | LFE | RC | FLC | FRC },
+ { .ca_id = 0x0c, .n_ch = 8,
+ .mask = FL | FR | RC | RL | RR },
+ { .ca_id = 0x18, .n_ch = 8,
+ .mask = FL | FR | RC | FLC | FRC },
+ { .ca_id = 0x17, .n_ch = 8,
+ .mask = FL | FR | LFE | FC | FLC | FRC },
+ { .ca_id = 0x16, .n_ch = 8,
+ .mask = FL | FR | FC | FLC | FRC },
+ { .ca_id = 0x15, .n_ch = 8,
+ .mask = FL | FR | LFE | FLC | FRC },
+ { .ca_id = 0x14, .n_ch = 8,
+ .mask = FL | FR | FLC | FRC },
};
struct hdmi_codec_priv {
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Sat, 27 Feb 2021 17:52:02 +0100
Subject: [PATCH] arm64: dts: rockchip: add SPDIF nodes for RK3328 A1 board
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 40bf808642b9..27a1799027c2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -57,6 +57,24 @@ ir-receiver {
gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
linux,rc-map-name = "rc-beelink-gs1";
};
+
+ spdif_sound: spdif-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "SPDIF";
+
+ simple-audio-card,cpu {
+ sound-dai = <&spdif>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ spdif_dit: spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ };
};
&analog_sound {
@@ -325,6 +343,11 @@ &sdmmc {
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Sat, 27 Feb 2021 18:01:13 +0100
Subject: [PATCH] arm64: dts: rockchip: Add ir-receiver node for RK3328 ROC CC
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 51c7723d6762..cf321302daec 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -88,6 +88,13 @@ vcc_phy: vcc-phy-regulator {
regulator-boot-on;
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
@@ -312,6 +319,13 @@ &io_domains {
};
&pinctrl {
+
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Mon, 1 Mar 2021 21:24:15 +0100
Subject: [PATCH] ARM: dts: add cec pinctrl for RK3288 miqi board
---
arch/arm/boot/dts/rk3288-miqi.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index 8d30c49f406e..6d90db5a3b75 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -145,6 +145,8 @@ &gpu {
&hdmi {
ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec_c0>;
status = "okay";
};
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Mon, 1 Mar 2021 19:22:15 +0100
Subject: [PATCH] HACK: arm64: dts: enable FE phy for Beelink A1 also
---
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 27a1799027c2..7de9dfa71d89 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -147,6 +147,14 @@ rtl8211f: ethernet-phy@0 {
};
};
+&gmac2phy {
+ clock_in_out = "output";
+ assigned-clock-rate = <50000000>;
+ assigned-clocks = <&cru SCLK_MAC2PHY>;
+ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
+ status = "okay";
+};
+
&gpu {
mali-supply = <&vdd_logic>;
};
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Jonas Karlman <jonas@kwiboo.se>
Date: Tue, 26 Feb 2019 20:45:14 +0000
Subject: [PATCH] WIP: dw-hdmi-cec: sleep 100ms on error
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
index c8f44bcb298a..d4280ce4542c 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-cec.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2015-2017 Russell King.
*/
+#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -129,8 +130,15 @@ static irqreturn_t dw_hdmi_cec_hardirq(int irq, void *data)
dw_hdmi_write(cec, stat, HDMI_IH_CEC_STAT0);
- if (stat & CEC_STAT_ERROR_INIT) {
- cec->tx_status = CEC_TX_STATUS_ERROR;
+ /* Status with both done and error_initiator bits have been seen
+ * on Rockchip RK3328 devices, transmit attempt seems to have failed
+ * when this happens, report as low drive and block cec-framework
+ * 100ms before core retransmits the failed message, this seems to
+ * mitigate the issue with failed transmit attempts.
+ */
+ if ((stat & (CEC_STAT_DONE|CEC_STAT_ERROR_INIT)) == (CEC_STAT_DONE|CEC_STAT_ERROR_INIT)) {
+ pr_debug("dw_hdmi_cec_hardirq: stat=%02x LOW_DRIVE\n", stat);
+ cec->tx_status = CEC_TX_STATUS_LOW_DRIVE;
cec->tx_done = true;
ret = IRQ_WAKE_THREAD;
} else if (stat & CEC_STAT_DONE) {
@@ -141,6 +149,10 @@ static irqreturn_t dw_hdmi_cec_hardirq(int irq, void *data)
cec->tx_status = CEC_TX_STATUS_NACK;
cec->tx_done = true;
ret = IRQ_WAKE_THREAD;
+ } else if (stat & CEC_STAT_ERROR_INIT) {
+ cec->tx_status = CEC_TX_STATUS_ERROR;
+ cec->tx_done = true;
+ ret = IRQ_WAKE_THREAD;
}
if (stat & CEC_STAT_EOM) {
@@ -173,6 +185,8 @@ static irqreturn_t dw_hdmi_cec_thread(int irq, void *data)
if (cec->tx_done) {
cec->tx_done = false;
+ if (cec->tx_status == CEC_TX_STATUS_LOW_DRIVE)
+ msleep(100);
cec_transmit_attempt_done(adap, cec->tx_status);
}
if (cec->rx_done) {
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Wed, 5 May 2021 19:11:12 +0200
Subject: [PATCH] arm64: boot: dts: Increase ACLK_PERILP0 clock rate for RK3399
As per vendor kernel. Leaving this clock at the lower rate will
result in poor DMA controller performance
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index a10fe60b7680..dbe6a9cb98a5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1477,7 +1477,7 @@ cru: clock-controller@ff760000 {
<1000000000>,
<150000000>, <75000000>,
<37500000>,
- <100000000>, <100000000>,
+ <300000000>, <100000000>,
<50000000>, <600000000>,
<100000000>, <50000000>,
<400000000>, <400000000>,
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Sat, 21 Aug 2021 17:04:46 +0200
Subject: [PATCH] arm64: dts: rockchip: Enable USB3 for rk3328 Beelink A1
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index 7de9dfa71d89..e857e5a727f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -389,6 +389,11 @@ &usb_host0_ehci {
status = "okay";
};
+&usbdrd3 {
+ dr_mode = "host";
+ status = "okay";
+};
+
&vop {
status = "okay";
};
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Sat, 30 Oct 2021 12:19:19 +0200
Subject: [PATCH] WIP: drm: bridge: dw-hdmi: switch from .hw_parmas to .prepare
for i2s
Seems to be the only way to get AES bits correctly as set by
userspace.
TODO: check other consequences.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
index a2f0860b20bb..8961f9c7885d 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
@@ -34,9 +34,9 @@ static inline u8 hdmi_read(struct dw_hdmi_i2s_audio_data *audio, int offset)
return audio->read(hdmi, offset);
}
-static int dw_hdmi_i2s_hw_params(struct device *dev, void *data,
- struct hdmi_codec_daifmt *fmt,
- struct hdmi_codec_params *hparms)
+static int dw_hdmi_i2s_prepare(struct device *dev, void *data,
+ struct hdmi_codec_daifmt *fmt,
+ struct hdmi_codec_params *hparms)
{
struct dw_hdmi_i2s_audio_data *audio = data;
struct dw_hdmi *hdmi = audio->hdmi;
@@ -178,7 +178,7 @@ static int dw_hdmi_i2s_hook_plugged_cb(struct device *dev, void *data,
}
static const struct hdmi_codec_ops dw_hdmi_i2s_ops = {
- .hw_params = dw_hdmi_i2s_hw_params,
+ .prepare = dw_hdmi_i2s_prepare,
.audio_startup = dw_hdmi_i2s_audio_startup,
.audio_shutdown = dw_hdmi_i2s_audio_shutdown,
.get_eld = dw_hdmi_i2s_get_eld,
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Alex Bee <knaerzche@gmail.com>
Date: Sun, 18 Sep 2022 10:35:52 +0200
Subject: [PATCH] arm64: dts: rockchip: Disbake fusb for rk3399-roc-pc
As it will lead to an unbootable device in case one if those ports
is used to power up the device.
See https://lkml.org/lkml/2022/6/20/413
---
arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 2f4b1b2e3ac7..7217ead94d39 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -215,7 +215,7 @@ vdd_log: vdd-log {
regulator-name = "vdd_log";
regulator-always-on;
regulator-boot-on;
- regulator-min-microvolt = <450000>;
+ regulator-min-microvolt = <430000>;
regulator-max-microvolt = <1400000>;
pwm-supply = <&vcc3v3_sys>;
};
@@ -536,7 +536,7 @@ fusb1: usb-typec@22 {
pinctrl-names = "default";
pinctrl-0 = <&fusb1_int>;
vbus-supply = <&vcc_vbus_typec1>;
- status = "okay";
+ status = "disabled";
};
};
@@ -553,7 +553,7 @@ fusb0: usb-typec@22 {
pinctrl-names = "default";
pinctrl-0 = <&fusb0_int>;
vbus-supply = <&vcc_vbus_typec0>;
- status = "okay";
+ status = "disabled";
};
mp8859: regulator@66 {
Reference in New Issue View Git Blame Copy Permalink