74 lines
2.2 KiB
Diff
74 lines
2.2 KiB
Diff
From 26d94bbe66813ea5762915dba8500053fb94a5ba Mon Sep 17 00:00:00 2001
|
|
From: Ondrej Jirman <megous@megous.com>
|
|
Date: Sun, 5 Jul 2020 16:00:16 +0200
|
|
Subject: [PATCH 297/478] drm/panel: st7703: Improve the power up sequence of
|
|
the panel
|
|
|
|
The datasheet specifies that it's better to keep reset asserted
|
|
while powering up the supplies, and that IOVCC should be enabled
|
|
first.
|
|
|
|
There also needs to be a delay after enabling the supplies and
|
|
before deasserting the reset. The datasheet specifies 1ms after
|
|
the supplies reach the required voltage. Use 10-20ms to give the
|
|
power supplies some time to reach the required voltage, too.
|
|
|
|
This fixes panel initialization failures during resume from sleep
|
|
on PinePhone.
|
|
|
|
Signed-off-by: Ondrej Jirman <megous@megous.com>
|
|
---
|
|
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 25 ++++++++++---------
|
|
1 file changed, 13 insertions(+), 12 deletions(-)
|
|
|
|
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
index 9a34368f1851..832c9aec0ce1 100644
|
|
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
|
|
@@ -425,29 +425,30 @@ static int st7703_prepare(struct drm_panel *panel)
|
|
return 0;
|
|
|
|
dev_dbg(ctx->dev, "Resetting the panel\n");
|
|
- ret = regulator_enable(ctx->vcc);
|
|
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
+
|
|
+ ret = regulator_enable(ctx->iovcc);
|
|
if (ret < 0) {
|
|
- dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
|
|
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
- ret = regulator_enable(ctx->iovcc);
|
|
+
|
|
+ ret = regulator_enable(ctx->vcc);
|
|
if (ret < 0) {
|
|
- dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
|
|
- goto disable_vcc;
|
|
+ dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
|
|
+ regulator_disable(ctx->iovcc);
|
|
+ return ret;
|
|
}
|
|
|
|
- gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
- usleep_range(20, 40);
|
|
+ /* Give power supplies time to stabilize before deasserting reset. */
|
|
+ usleep_range(10000, 20000);
|
|
+
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
- msleep(20);
|
|
+ usleep_range(15000, 20000);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
-
|
|
-disable_vcc:
|
|
- regulator_disable(ctx->vcc);
|
|
- return ret;
|
|
}
|
|
|
|
static int st7703_get_modes(struct drm_panel *panel,
|
|
--
|
|
2.35.3
|
|
|