build/patch/kernel/archive/sunxi-5.15/patches.megous/ARM-dts-sun8i-a83t-tbs-a711-Add-sound-support-via-AC100-codec.patch

133 lines
3.3 KiB
Diff

From 80b13b390540107e7bbd93cd4cc89406ce776484 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Sat, 22 Feb 2020 23:40:29 +0100
Subject: [PATCH 132/478] ARM: dts: sun8i-a83t-tbs-a711: Add sound support via
AC100 codec
...
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 85 +++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
index 36a72c001969..603918c625e2 100644
--- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
@@ -150,6 +150,74 @@ modem {
reset-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
wakeup-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */
};
+
+ bt_sco_codec: bt-sco-codec {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ sound-name-prefix = "Bluetooth";
+ };
+
+ speaker_amp: audio-amplifier {
+ compatible = "simple-audio-amplifier";
+ enable-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ sound-name-prefix = "Speaker Amp";
+ };
+
+ sound: sound {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ac100-audio";
+ simple-audio-card,aux-devs = <&ac100_codec_analog>, <&speaker_amp>;
+ simple-audio-card,widgets = "Microphone", "Headset Microphone",
+ "Microphone", "Internal Microphone",
+ "Headphone", "Headphone Jack",
+ "Speaker", "Internal Speaker";
+ simple-audio-card,routing =
+ "Headphone Jack", "HP",
+ "Internal Speaker", "Speaker Amp OUTL",
+ "Speaker Amp INL", "SPKOUTL",
+ "Left DAC", "DACL",
+ "Right DAC", "DACR",
+ "ADCL", "Left ADC",
+ "ADCR", "Right ADC",
+ "Internal Microphone", "MBIAS",
+ "MIC1", "Internal Microphone",
+ "Headset Microphone", "HBIAS",
+ "MIC2", "Headset Microphone";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ frame-master = <&link0_cpu>;
+ bitclock-master = <&link0_cpu>;
+ mclk-fs = <512>;
+
+ link0_cpu: cpu {
+ sound-dai = <&i2s0>;
+ };
+
+ link0_codec: codec {
+ sound-dai = <&ac100_codec 0>;
+ };
+ };
+
+ simple-audio-card,dai-link@2 {
+ format = "dsp_a";
+ frame-master = <&link2_codec>;
+ bitclock-master = <&link2_codec>;
+ bitclock-inversion;
+
+ link2_cpu: cpu {
+ sound-dai = <&bt_sco_codec 0>;
+ };
+
+ link2_codec: codec {
+ sound-dai = <&ac100_codec 2>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+ };
+ };
};
&cpu0 {
@@ -218,6 +286,12 @@ npc100: nfc@28 {
};
};
+&i2s0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_pins>;
+};
+
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
pinctrl-names = "default";
@@ -298,12 +372,23 @@ ac100: codec@e89 {
compatible = "x-powers,ac100";
reg = <0xe89>;
+ ac100_codec_analog: codec-analog {
+ compatible = "x-powers,ac100-codec-analog";
+ cpvdd-supply = <&reg_aldo2>;
+ };
+
ac100_codec: codec {
+ #sound-dai-cells = <1>;
compatible = "x-powers,ac100-codec";
interrupt-parent = <&r_pio>;
interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
#clock-cells = <0>;
clock-output-names = "4M_adda";
+
+ LDOIN-supply = <&reg_aldo2>;
+ AVCC-supply = <&reg_aldo3>;
+ VDDIO1-supply = <&reg_dcdc1>;
+ VDDIO2-supply = <&reg_dldo1>;
};
ac100_rtc: rtc {
--
2.35.3