build/patch/kernel/archive/sunxi-5.15/patches.megous/clk-sunxi-ng-Set-maximum-P-and-M-factors-to-1-for-H3-pll-cpux-c.patch

61 lines
1.8 KiB
Diff

From 20c09cf5906df369c2eaeed41d48b6c1bf2cedf0 Mon Sep 17 00:00:00 2001
From: Ondrej Jirman <megous@megous.com>
Date: Thu, 12 Jan 2017 16:34:57 +0100
Subject: [PATCH 113/478] clk: sunxi-ng: Set maximum P and M factors to 1 for
H3 pll-cpux clock
When using M factor greater than 1 system is experiencing
occasional lockups. P factor should only be used for clock
speeds below 288MHz. We don't use such speeds in the mainline
kernel.
This change was verified to fix lockups with PLL stress
tester available at https://xff.cz/git/arisc-firmware/.
Note that M factor must not be used outside the kernel either,
so for example u-boot needs a similar patch.
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
index 7e629a4493af..ec4c92bca173 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
@@ -23,15 +23,21 @@
#include "ccu-sun8i-h3.h"
-static SUNXI_CCU_NKMP_WITH_GATE_LOCK(pll_cpux_clk, "pll-cpux",
- "osc24M", 0x000,
- 8, 5, /* N */
- 4, 2, /* K */
- 0, 2, /* M */
- 16, 2, /* P */
- BIT(31), /* gate */
- BIT(28), /* lock */
- CLK_SET_RATE_UNGATE);
+static struct ccu_nkmp pll_cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT(8, 5),
+ .k = _SUNXI_CCU_MULT(4, 2),
+ .m = _SUNXI_CCU_DIV_MAX(0, 2, 1),
+ .p = _SUNXI_CCU_DIV_MAX(16, 2, 1),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-cpux",
+ "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
/*
* The Audio PLL is supposed to have 4 outputs: 3 fixed factors from
--
2.35.3