113 lines
4.2 KiB
Diff
113 lines
4.2 KiB
Diff
From 5930289661aebfe173b41fb231b812eb1d04387e Mon Sep 17 00:00:00 2001
|
|
From: Roman Beranek <roman.beranek@prusa3d.com>
|
|
Date: Wed, 25 Nov 2020 13:07:35 +0100
|
|
Subject: [PATCH 193/388] drm/sun4i: decouple TCON_DCLK_DIV value from
|
|
pll_mipi/dotclock ratio
|
|
|
|
Observations showed that an actual refresh rate differs from the intended.
|
|
Specifically, in case of 4-lane panels it was reduced by 1/3, and in case of
|
|
2-lane panels by 2/3.
|
|
|
|
BSP code apparently distinguishes between a `dsi_div` and a 'tcon inner div'.
|
|
While this 'inner' divider is under DSI always 4, the `dsi_div` is defined
|
|
as a number of bits per pixel over a number of DSI lanes. This value is then
|
|
involved in setting the rate of PLL_MIPI.
|
|
|
|
I couldn't really figure out how to fit this into the dotclock driver,
|
|
so I opted for this hack where the requested rate is adjusted in such a way
|
|
that the sun4i_dotclock driver can remain untouched.
|
|
---
|
|
drivers/gpu/drm/sun4i/sun4i_tcon.c | 44 +++++++++++++++++-------------
|
|
1 file changed, 25 insertions(+), 19 deletions(-)
|
|
|
|
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
|
|
index 0d06c45ef..f305df947 100644
|
|
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
|
|
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
|
|
@@ -291,18 +291,6 @@ static int sun4i_tcon_get_clk_delay(const struct drm_display_mode *mode,
|
|
return delay;
|
|
}
|
|
|
|
-static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
|
|
- const struct drm_display_mode *mode)
|
|
-{
|
|
- /* Configure the dot clock */
|
|
- clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
|
|
-
|
|
- /* Set the resolution */
|
|
- regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
|
|
- SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
|
|
- SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
|
|
-}
|
|
-
|
|
static void sun4i_tcon0_mode_set_dithering(struct sun4i_tcon *tcon,
|
|
const struct drm_connector *connector)
|
|
{
|
|
@@ -365,12 +353,18 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
|
|
u8 bpp = mipi_dsi_pixel_format_to_bpp(device->format);
|
|
u8 lanes = device->lanes;
|
|
u32 block_space, start_delay;
|
|
- u32 tcon_div;
|
|
|
|
tcon->dclk_min_div = SUN6I_DSI_TCON_DIV;
|
|
tcon->dclk_max_div = SUN6I_DSI_TCON_DIV;
|
|
|
|
- sun4i_tcon0_mode_set_common(tcon, mode);
|
|
+ /* Configure the dot clock */
|
|
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000
|
|
+ * bpp / (lanes * SUN6I_DSI_TCON_DIV));
|
|
+
|
|
+ /* Set the resolution */
|
|
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
|
|
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
|
|
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
|
|
|
|
/* Set dithering if needed */
|
|
sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
|
|
@@ -394,9 +388,7 @@ static void sun4i_tcon0_mode_set_cpu(struct sun4i_tcon *tcon,
|
|
* The datasheet says that this should be set higher than 20 *
|
|
* pixel cycle, but it's not clear what a pixel cycle is.
|
|
*/
|
|
- regmap_read(tcon->regs, SUN4I_TCON0_DCLK_REG, &tcon_div);
|
|
- tcon_div &= GENMASK(6, 0);
|
|
- block_space = mode->htotal * bpp / (tcon_div * lanes);
|
|
+ block_space = mode->htotal * bpp / (SUN6I_DSI_TCON_DIV * lanes);
|
|
block_space -= mode->hdisplay + 40;
|
|
|
|
regmap_write(tcon->regs, SUN4I_TCON0_CPU_TRI0_REG,
|
|
@@ -438,7 +430,14 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
|
|
|
|
tcon->dclk_min_div = 7;
|
|
tcon->dclk_max_div = 7;
|
|
- sun4i_tcon0_mode_set_common(tcon, mode);
|
|
+
|
|
+ /* Configure the dot clock */
|
|
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
|
|
+
|
|
+ /* Set the resolution */
|
|
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
|
|
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
|
|
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
|
|
|
|
/* Set dithering if needed */
|
|
sun4i_tcon0_mode_set_dithering(tcon, sun4i_tcon_get_connector(encoder));
|
|
@@ -517,7 +516,14 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
|
|
|
|
tcon->dclk_min_div = tcon->quirks->dclk_min_div;
|
|
tcon->dclk_max_div = 127;
|
|
- sun4i_tcon0_mode_set_common(tcon, mode);
|
|
+
|
|
+ /* Configure the dot clock */
|
|
+ clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
|
|
+
|
|
+ /* Set the resolution */
|
|
+ regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
|
|
+ SUN4I_TCON0_BASIC0_X(mode->crtc_hdisplay) |
|
|
+ SUN4I_TCON0_BASIC0_Y(mode->crtc_vdisplay));
|
|
|
|
/* Set dithering if needed */
|
|
sun4i_tcon0_mode_set_dithering(tcon, connector);
|
|
--
|
|
2.35.3
|
|
|