941 lines
21 KiB
Diff
941 lines
21 KiB
Diff
From fa572db881bc79f8f4bba5f4bf6658e269dca634 Mon Sep 17 00:00:00 2001
|
|
From: Christian Hewitt <christianshewitt@gmail.com>
|
|
Date: Wed, 25 Jan 2023 08:10:48 +0000
|
|
Subject: [PATCH 3/5] arm64: dts: meson: bananapi-m5: convert dts to dtsi
|
|
|
|
Convert the BPI-M5 dts into meson-sm1-bananapi.dtsi to support the
|
|
addition of new boards based on the same design.
|
|
|
|
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
|
|
---
|
|
.../dts/amlogic/meson-sm1-bananapi-m5.dts | 427 +----------------
|
|
.../boot/dts/amlogic/meson-sm1-bananapi.dtsi | 435 ++++++++++++++++++
|
|
2 files changed, 436 insertions(+), 426 deletions(-)
|
|
create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
|
|
|
|
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
|
|
index 86f0afe6491e..f045bf851638 100644
|
|
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
|
|
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
|
|
@@ -6,10 +6,7 @@
|
|
|
|
/dts-v1/;
|
|
|
|
-#include "meson-sm1.dtsi"
|
|
-#include <dt-bindings/leds/common.h>
|
|
-#include <dt-bindings/input/linux-event-codes.h>
|
|
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
|
+#include "meson-sm1-bananapi.dtsi"
|
|
#include <dt-bindings/sound/meson-g12a-toacodec.h>
|
|
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
|
|
|
@@ -17,28 +14,6 @@ / {
|
|
compatible = "bananapi,bpi-m5", "amlogic,sm1";
|
|
model = "Banana Pi BPI-M5";
|
|
|
|
- adc-keys {
|
|
- compatible = "adc-keys";
|
|
- io-channels = <&saradc 2>;
|
|
- io-channel-names = "buttons";
|
|
- keyup-threshold-microvolt = <1800000>;
|
|
-
|
|
- button-sw3 {
|
|
- label = "SW3";
|
|
- linux,code = <BTN_3>;
|
|
- press-threshold-microvolt = <1700000>;
|
|
- };
|
|
- };
|
|
-
|
|
- aliases {
|
|
- serial0 = &uart_AO;
|
|
- ethernet0 = ðmac;
|
|
- };
|
|
-
|
|
- chosen {
|
|
- stdout-path = "serial0:115200n8";
|
|
- };
|
|
-
|
|
/* TOFIX: handle CVBS_DET on SARADC channel 0 */
|
|
cvbs-connector {
|
|
compatible = "composite-video-connector";
|
|
@@ -50,150 +25,6 @@ cvbs_connector_in: endpoint {
|
|
};
|
|
};
|
|
|
|
- emmc_pwrseq: emmc-pwrseq {
|
|
- compatible = "mmc-pwrseq-emmc";
|
|
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
|
- };
|
|
-
|
|
- gpio-keys {
|
|
- compatible = "gpio-keys";
|
|
-
|
|
- key {
|
|
- label = "SW1";
|
|
- linux,code = <BTN_1>;
|
|
- gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
|
|
- interrupt-parent = <&gpio_intc>;
|
|
- interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
|
|
- };
|
|
- };
|
|
-
|
|
- hdmi-connector {
|
|
- compatible = "hdmi-connector";
|
|
- type = "a";
|
|
-
|
|
- port {
|
|
- hdmi_connector_in: endpoint {
|
|
- remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
- };
|
|
- };
|
|
- };
|
|
-
|
|
- leds {
|
|
- compatible = "gpio-leds";
|
|
-
|
|
- green {
|
|
- color = <LED_COLOR_ID_GREEN>;
|
|
- function = LED_FUNCTION_STATUS;
|
|
- gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
|
- };
|
|
-
|
|
- blue {
|
|
- color = <LED_COLOR_ID_BLUE>;
|
|
- function = LED_FUNCTION_STATUS;
|
|
- gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
|
|
- linux,default-trigger = "heartbeat";
|
|
- };
|
|
- };
|
|
-
|
|
- memory@0 {
|
|
- device_type = "memory";
|
|
- reg = <0x0 0x0 0x0 0x40000000>;
|
|
- };
|
|
-
|
|
- emmc_1v8: regulator-emmc_1v8 {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "EMMC_1V8";
|
|
- regulator-min-microvolt = <1800000>;
|
|
- regulator-max-microvolt = <1800000>;
|
|
- vin-supply = <&vddao_3v3>;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- dc_in: regulator-dc_in {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "DC_IN";
|
|
- regulator-min-microvolt = <5000000>;
|
|
- regulator-max-microvolt = <5000000>;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- vddio_c: regulator-vddio_c {
|
|
- compatible = "regulator-gpio";
|
|
- regulator-name = "VDDIO_C";
|
|
- regulator-min-microvolt = <1800000>;
|
|
- regulator-max-microvolt = <3300000>;
|
|
-
|
|
- enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
|
- enable-active-high;
|
|
- regulator-always-on;
|
|
-
|
|
- gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
|
|
- gpios-states = <1>;
|
|
-
|
|
- states = <1800000 0>,
|
|
- <3300000 1>;
|
|
- };
|
|
-
|
|
- tflash_vdd: regulator-tflash_vdd {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "TFLASH_VDD";
|
|
- regulator-min-microvolt = <3300000>;
|
|
- regulator-max-microvolt = <3300000>;
|
|
- vin-supply = <&dc_in>;
|
|
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
|
- enable-active-high;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- vddao_1v8: regulator-vddao_1v8 {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "VDDAO_1V8";
|
|
- regulator-min-microvolt = <1800000>;
|
|
- regulator-max-microvolt = <1800000>;
|
|
- vin-supply = <&vddao_3v3>;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- vddao_3v3: regulator-vddao_3v3 {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "VDDAO_3V3";
|
|
- regulator-min-microvolt = <3300000>;
|
|
- regulator-max-microvolt = <3300000>;
|
|
- vin-supply = <&dc_in>;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- vddcpu: regulator-vddcpu {
|
|
- /*
|
|
- * SY8120B1ABC DC/DC Regulator.
|
|
- */
|
|
- compatible = "pwm-regulator";
|
|
-
|
|
- regulator-name = "VDDCPU";
|
|
- regulator-min-microvolt = <690000>;
|
|
- regulator-max-microvolt = <1050000>;
|
|
-
|
|
- pwm-supply = <&dc_in>;
|
|
-
|
|
- pwms = <&pwm_AO_cd 1 1250 0>;
|
|
- pwm-dutycycle-range = <100 0>;
|
|
-
|
|
- regulator-boot-on;
|
|
- regulator-always-on;
|
|
- };
|
|
-
|
|
- /* USB Hub Power Enable */
|
|
- vl_pwr_en: regulator-vl_pwr_en {
|
|
- compatible = "regulator-fixed";
|
|
- regulator-name = "VL_PWR_EN";
|
|
- regulator-min-microvolt = <5000000>;
|
|
- regulator-max-microvolt = <5000000>;
|
|
- vin-supply = <&dc_in>;
|
|
-
|
|
- gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
|
- enable-active-high;
|
|
- };
|
|
-
|
|
sound {
|
|
compatible = "amlogic,axg-sound-card";
|
|
model = "BPI-M5";
|
|
@@ -318,68 +149,17 @@ &acodec {
|
|
status = "okay";
|
|
};
|
|
|
|
-&arb {
|
|
- status = "okay";
|
|
-};
|
|
|
|
&clkc_audio {
|
|
status = "okay";
|
|
};
|
|
|
|
-&cpu0 {
|
|
- cpu-supply = <&vddcpu>;
|
|
- operating-points-v2 = <&cpu_opp_table>;
|
|
- clocks = <&clkc CLKID_CPU_CLK>;
|
|
- clock-latency = <50000>;
|
|
-};
|
|
-
|
|
-&cpu1 {
|
|
- cpu-supply = <&vddcpu>;
|
|
- operating-points-v2 = <&cpu_opp_table>;
|
|
- clocks = <&clkc CLKID_CPU1_CLK>;
|
|
- clock-latency = <50000>;
|
|
-};
|
|
-
|
|
-&cpu2 {
|
|
- cpu-supply = <&vddcpu>;
|
|
- operating-points-v2 = <&cpu_opp_table>;
|
|
- clocks = <&clkc CLKID_CPU2_CLK>;
|
|
- clock-latency = <50000>;
|
|
-};
|
|
-
|
|
-&cpu3 {
|
|
- cpu-supply = <&vddcpu>;
|
|
- operating-points-v2 = <&cpu_opp_table>;
|
|
- clocks = <&clkc CLKID_CPU3_CLK>;
|
|
- clock-latency = <50000>;
|
|
-};
|
|
-
|
|
&cvbs_vdac_port {
|
|
cvbs_vdac_out: endpoint {
|
|
remote-endpoint = <&cvbs_connector_in>;
|
|
};
|
|
};
|
|
|
|
-&ext_mdio {
|
|
- external_phy: ethernet-phy@0 {
|
|
- /* Realtek RTL8211F (0x001cc916) */
|
|
- reg = <0>;
|
|
- max-speed = <1000>;
|
|
-
|
|
- interrupt-parent = <&gpio_intc>;
|
|
- /* MAC_INTR on GPIOZ_14 */
|
|
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
|
- };
|
|
-};
|
|
-
|
|
-ðmac {
|
|
- pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
|
- pinctrl-names = "default";
|
|
- status = "okay";
|
|
- phy-mode = "rgmii-txid";
|
|
- phy-handle = <&external_phy>;
|
|
-};
|
|
-
|
|
&frddr_a {
|
|
status = "okay";
|
|
};
|
|
@@ -392,192 +172,6 @@ &frddr_c {
|
|
status = "okay";
|
|
};
|
|
|
|
-&gpio {
|
|
- gpio-line-names =
|
|
- /* GPIOZ */
|
|
- "ETH_MDIO", /* GPIOZ_0 */
|
|
- "ETH_MDC", /* GPIOZ_1 */
|
|
- "ETH_RXCLK", /* GPIOZ_2 */
|
|
- "ETH_RX_DV", /* GPIOZ_3 */
|
|
- "ETH_RXD0", /* GPIOZ_4 */
|
|
- "ETH_RXD1", /* GPIOZ_5 */
|
|
- "ETH_RXD2", /* GPIOZ_6 */
|
|
- "ETH_RXD3", /* GPIOZ_7 */
|
|
- "ETH_TXCLK", /* GPIOZ_8 */
|
|
- "ETH_TXEN", /* GPIOZ_9 */
|
|
- "ETH_TXD0", /* GPIOZ_10 */
|
|
- "ETH_TXD1", /* GPIOZ_11 */
|
|
- "ETH_TXD2", /* GPIOZ_12 */
|
|
- "ETH_TXD3", /* GPIOZ_13 */
|
|
- "ETH_INTR", /* GPIOZ_14 */
|
|
- "ETH_NRST", /* GPIOZ_15 */
|
|
- /* GPIOH */
|
|
- "HDMI_SDA", /* GPIOH_0 */
|
|
- "HDMI_SCL", /* GPIOH_1 */
|
|
- "HDMI_HPD", /* GPIOH_2 */
|
|
- "HDMI_CEC", /* GPIOH_3 */
|
|
- "VL-RST_N", /* GPIOH_4 */
|
|
- "CON1-P36", /* GPIOH_5 */
|
|
- "VL-PWREN", /* GPIOH_6 */
|
|
- "WiFi_3V3_1V8", /* GPIOH_7 */
|
|
- "TFLASH_VDD_EN", /* GPIOH_8 */
|
|
- /* BOOT */
|
|
- "eMMC_D0", /* BOOT_0 */
|
|
- "eMMC_D1", /* BOOT_1 */
|
|
- "eMMC_D2", /* BOOT_2 */
|
|
- "eMMC_D3", /* BOOT_3 */
|
|
- "eMMC_D4", /* BOOT_4 */
|
|
- "eMMC_D5", /* BOOT_5 */
|
|
- "eMMC_D6", /* BOOT_6 */
|
|
- "eMMC_D7", /* BOOT_7 */
|
|
- "eMMC_CLK", /* BOOT_8 */
|
|
- "",
|
|
- "eMMC_CMD", /* BOOT_10 */
|
|
- "",
|
|
- "eMMC_RST#", /* BOOT_12 */
|
|
- "eMMC_DS", /* BOOT_13 */
|
|
- "", "",
|
|
- /* GPIOC */
|
|
- "SD_D0_B", /* GPIOC_0 */
|
|
- "SD_D1_B", /* GPIOC_1 */
|
|
- "SD_D2_B", /* GPIOC_2 */
|
|
- "SD_D3_B", /* GPIOC_3 */
|
|
- "SD_CLK_B", /* GPIOC_4 */
|
|
- "SD_CMD_B", /* GPIOC_5 */
|
|
- "CARD_EN_DET", /* GPIOC_6 */
|
|
- "",
|
|
- /* GPIOA */
|
|
- "", "", "", "", "", "", "", "",
|
|
- "", "", "", "", "", "",
|
|
- "CON1-P27", /* GPIOA_14 */
|
|
- "CON1-P28", /* GPIOA_15 */
|
|
- /* GPIOX */
|
|
- "CON1-P16", /* GPIOX_0 */
|
|
- "CON1-P18", /* GPIOX_1 */
|
|
- "CON1-P22", /* GPIOX_2 */
|
|
- "CON1-P11", /* GPIOX_3 */
|
|
- "CON1-P13", /* GPIOX_4 */
|
|
- "CON1-P07", /* GPIOX_5 */
|
|
- "CON1-P33", /* GPIOX_6 */
|
|
- "CON1-P15", /* GPIOX_7 */
|
|
- "CON1-P19", /* GPIOX_8 */
|
|
- "CON1-P21", /* GPIOX_9 */
|
|
- "CON1-P24", /* GPIOX_10 */
|
|
- "CON1-P23", /* GPIOX_11 */
|
|
- "CON1-P08", /* GPIOX_12 */
|
|
- "CON1-P10", /* GPIOX_13 */
|
|
- "CON1-P29", /* GPIOX_14 */
|
|
- "CON1-P31", /* GPIOX_15 */
|
|
- "CON1-P26", /* GPIOX_16 */
|
|
- "CON1-P03", /* GPIOX_17 */
|
|
- "CON1-P05", /* GPIOX_18 */
|
|
- "CON1-P32"; /* GPIOX_19 */
|
|
-
|
|
- /*
|
|
- * WARNING: The USB Hub on the BPI-M5 needs a reset signal
|
|
- * to be turned high in order to be detected by the USB Controller
|
|
- * This signal should be handled by a USB specific power sequence
|
|
- * in order to reset the Hub when USB bus is powered down.
|
|
- */
|
|
- usb-hub {
|
|
- gpio-hog;
|
|
- gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
|
- output-high;
|
|
- line-name = "usb-hub-reset";
|
|
- };
|
|
-};
|
|
-
|
|
-&gpio_ao {
|
|
- gpio-line-names =
|
|
- /* GPIOAO */
|
|
- "DEBUG TX", /* GPIOAO_0 */
|
|
- "DEBUG RX", /* GPIOAO_1 */
|
|
- "SYS_LED2", /* GPIOAO_2 */
|
|
- "UPDATE_KEY", /* GPIOAO_3 */
|
|
- "CON1-P40", /* GPIOAO_4 */
|
|
- "IR_IN", /* GPIOAO_5 */
|
|
- "TF_3V3N_1V8_EN", /* GPIOAO_6 */
|
|
- "CON1-P35", /* GPIOAO_7 */
|
|
- "CON1-P12", /* GPIOAO_8 */
|
|
- "CON1-P37", /* GPIOAO_9 */
|
|
- "CON1-P38", /* GPIOAO_10 */
|
|
- "SYS_LED", /* GPIOAO_11 */
|
|
- /* GPIOE */
|
|
- "VDDEE_PWM", /* GPIOE_0 */
|
|
- "VDDCPU_PWM", /* GPIOE_1 */
|
|
- "TF_PWR_EN"; /* GPIOE_2 */
|
|
-};
|
|
-
|
|
-&hdmi_tx {
|
|
- status = "okay";
|
|
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
|
- pinctrl-names = "default";
|
|
- hdmi-supply = <&dc_in>;
|
|
-};
|
|
-
|
|
-&hdmi_tx_tmds_port {
|
|
- hdmi_tx_tmds_out: endpoint {
|
|
- remote-endpoint = <&hdmi_connector_in>;
|
|
- };
|
|
-};
|
|
-
|
|
-&ir {
|
|
- status = "okay";
|
|
- pinctrl-0 = <&remote_input_ao_pins>;
|
|
- pinctrl-names = "default";
|
|
-};
|
|
-
|
|
-&pwm_AO_cd {
|
|
- pinctrl-0 = <&pwm_ao_d_e_pins>;
|
|
- pinctrl-names = "default";
|
|
- clocks = <&xtal>;
|
|
- clock-names = "clkin1";
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&saradc {
|
|
- status = "okay";
|
|
- vref-supply = <&vddao_1v8>;
|
|
-};
|
|
-
|
|
-/* SD card */
|
|
-&sd_emmc_b {
|
|
- status = "okay";
|
|
- pinctrl-0 = <&sdcard_c_pins>;
|
|
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
|
- pinctrl-names = "default", "clk-gate";
|
|
-
|
|
- bus-width = <4>;
|
|
- cap-sd-highspeed;
|
|
- max-frequency = <50000000>;
|
|
- disable-wp;
|
|
-
|
|
- /* TOFIX: SD card is barely usable in SDR modes */
|
|
-
|
|
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
|
- vmmc-supply = <&tflash_vdd>;
|
|
- vqmmc-supply = <&vddio_c>;
|
|
-};
|
|
-
|
|
-/* eMMC */
|
|
-&sd_emmc_c {
|
|
- status = "okay";
|
|
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
|
- pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
- pinctrl-names = "default", "clk-gate";
|
|
-
|
|
- bus-width = <8>;
|
|
- cap-mmc-highspeed;
|
|
- mmc-ddr-1_8v;
|
|
- mmc-hs200-1_8v;
|
|
- max-frequency = <200000000>;
|
|
- disable-wp;
|
|
-
|
|
- mmc-pwrseq = <&emmc_pwrseq>;
|
|
- vmmc-supply = <&vddao_3v3>;
|
|
- vqmmc-supply = <&emmc_1v8>;
|
|
-};
|
|
-
|
|
&tdmif_b {
|
|
status = "okay";
|
|
};
|
|
@@ -625,22 +219,3 @@ &toddr_b {
|
|
&toddr_c {
|
|
status = "okay";
|
|
};
|
|
-
|
|
-&uart_AO {
|
|
- status = "okay";
|
|
- pinctrl-0 = <&uart_ao_a_pins>;
|
|
- pinctrl-names = "default";
|
|
-};
|
|
-
|
|
-&usb {
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&usb2_phy0 {
|
|
- phy-supply = <&dc_in>;
|
|
-};
|
|
-
|
|
-&usb2_phy1 {
|
|
- /* Enable the hub which is connected to this port */
|
|
- phy-supply = <&vl_pwr_en>;
|
|
-};
|
|
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
|
|
new file mode 100644
|
|
index 000000000000..c914f1148185
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
|
|
@@ -0,0 +1,435 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+/*
|
|
+ * Copyright (c) 2021 BayLibre SAS
|
|
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
+ */
|
|
+
|
|
+#include "meson-sm1.dtsi"
|
|
+#include <dt-bindings/leds/common.h>
|
|
+#include <dt-bindings/input/linux-event-codes.h>
|
|
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
|
+
|
|
+/ {
|
|
+ adc_keys {
|
|
+ compatible = "adc-keys";
|
|
+ io-channels = <&saradc 2>;
|
|
+ io-channel-names = "buttons";
|
|
+ keyup-threshold-microvolt = <1800000>;
|
|
+
|
|
+ key {
|
|
+ label = "SW3";
|
|
+ linux,code = <BTN_3>;
|
|
+ press-threshold-microvolt = <1700000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart_AO;
|
|
+ ethernet0 = ðmac;
|
|
+ };
|
|
+
|
|
+ chosen {
|
|
+ stdout-path = "serial0:115200n8";
|
|
+ };
|
|
+
|
|
+ emmc_pwrseq: emmc-pwrseq {
|
|
+ compatible = "mmc-pwrseq-emmc";
|
|
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ key {
|
|
+ label = "SW1";
|
|
+ linux,code = <BTN_1>;
|
|
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
|
|
+ interrupt-parent = <&gpio_intc>;
|
|
+ interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ hdmi-connector {
|
|
+ compatible = "hdmi-connector";
|
|
+ type = "a";
|
|
+
|
|
+ port {
|
|
+ hdmi_connector_in: endpoint {
|
|
+ remote-endpoint = <&hdmi_tx_tmds_out>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ led-green {
|
|
+ color = <LED_COLOR_ID_GREEN>;
|
|
+ function = LED_FUNCTION_STATUS;
|
|
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
|
+ };
|
|
+
|
|
+ led-blue {
|
|
+ color = <LED_COLOR_ID_BLUE>;
|
|
+ function = LED_FUNCTION_STATUS;
|
|
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ memory@0 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x0 0x0 0x0 0x40000000>;
|
|
+ };
|
|
+
|
|
+ emmc_1v8: regulator-emmc_1v8 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "EMMC_1V8";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ vin-supply = <&vddao_3v3>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ dc_in: regulator-dc_in {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "DC_IN";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ vddio_c: regulator-vddio_c {
|
|
+ compatible = "regulator-gpio";
|
|
+ regulator-name = "VDDIO_C";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+
|
|
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+
|
|
+ gpios = <&gpio_ao GPIOAO_6 GPIO_OPEN_DRAIN>;
|
|
+ gpios-states = <1>;
|
|
+
|
|
+ states = <1800000 0>,
|
|
+ <3300000 1>;
|
|
+ };
|
|
+
|
|
+ tflash_vdd: regulator-tflash_vdd {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "TFLASH_VDD";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&dc_in>;
|
|
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
|
|
+ enable-active-high;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ vddao_1v8: regulator-vddao_1v8 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "VDDAO_1V8";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ vin-supply = <&vddao_3v3>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ vddao_3v3: regulator-vddao_3v3 {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "VDDAO_3V3";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&dc_in>;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ vddcpu: regulator-vddcpu {
|
|
+ /*
|
|
+ * SY8120B1ABC DC/DC Regulator.
|
|
+ */
|
|
+ compatible = "pwm-regulator";
|
|
+
|
|
+ regulator-name = "VDDCPU";
|
|
+ regulator-min-microvolt = <690000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+
|
|
+ pwm-supply = <&dc_in>;
|
|
+
|
|
+ pwms = <&pwm_AO_cd 1 1250 0>;
|
|
+ pwm-dutycycle-range = <100 0>;
|
|
+
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ };
|
|
+
|
|
+ /* USB Hub Power Enable */
|
|
+ vl_pwr_en: regulator-vl_pwr_en {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "VL_PWR_EN";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ vin-supply = <&dc_in>;
|
|
+
|
|
+ gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
|
|
+ enable-active-high;
|
|
+ };
|
|
+};
|
|
+
|
|
+&arb {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vddcpu>;
|
|
+ operating-points-v2 = <&cpu_opp_table>;
|
|
+ clocks = <&clkc CLKID_CPU_CLK>;
|
|
+ clock-latency = <50000>;
|
|
+};
|
|
+
|
|
+&cpu1 {
|
|
+ cpu-supply = <&vddcpu>;
|
|
+ operating-points-v2 = <&cpu_opp_table>;
|
|
+ clocks = <&clkc CLKID_CPU1_CLK>;
|
|
+ clock-latency = <50000>;
|
|
+};
|
|
+
|
|
+&cpu2 {
|
|
+ cpu-supply = <&vddcpu>;
|
|
+ operating-points-v2 = <&cpu_opp_table>;
|
|
+ clocks = <&clkc CLKID_CPU2_CLK>;
|
|
+ clock-latency = <50000>;
|
|
+};
|
|
+
|
|
+&cpu3 {
|
|
+ cpu-supply = <&vddcpu>;
|
|
+ operating-points-v2 = <&cpu_opp_table>;
|
|
+ clocks = <&clkc CLKID_CPU3_CLK>;
|
|
+ clock-latency = <50000>;
|
|
+};
|
|
+
|
|
+&ext_mdio {
|
|
+ external_phy: ethernet-phy@0 {
|
|
+ /* Realtek RTL8211F (0x001cc916) */
|
|
+ reg = <0>;
|
|
+ max-speed = <1000>;
|
|
+
|
|
+ interrupt-parent = <&gpio_intc>;
|
|
+ /* MAC_INTR on GPIOZ_14 */
|
|
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
|
|
+ };
|
|
+};
|
|
+
|
|
+ðmac {
|
|
+ pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ status = "okay";
|
|
+ phy-mode = "rgmii-txid";
|
|
+ phy-handle = <&external_phy>;
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ gpio-line-names =
|
|
+ /* GPIOZ */
|
|
+ "ETH_MDIO", /* GPIOZ_0 */
|
|
+ "ETH_MDC", /* GPIOZ_1 */
|
|
+ "ETH_RXCLK", /* GPIOZ_2 */
|
|
+ "ETH_RX_DV", /* GPIOZ_3 */
|
|
+ "ETH_RXD0", /* GPIOZ_4 */
|
|
+ "ETH_RXD1", /* GPIOZ_5 */
|
|
+ "ETH_RXD2", /* GPIOZ_6 */
|
|
+ "ETH_RXD3", /* GPIOZ_7 */
|
|
+ "ETH_TXCLK", /* GPIOZ_8 */
|
|
+ "ETH_TXEN", /* GPIOZ_9 */
|
|
+ "ETH_TXD0", /* GPIOZ_10 */
|
|
+ "ETH_TXD1", /* GPIOZ_11 */
|
|
+ "ETH_TXD2", /* GPIOZ_12 */
|
|
+ "ETH_TXD3", /* GPIOZ_13 */
|
|
+ "ETH_INTR", /* GPIOZ_14 */
|
|
+ "ETH_NRST", /* GPIOZ_15 */
|
|
+ /* GPIOH */
|
|
+ "HDMI_SDA", /* GPIOH_0 */
|
|
+ "HDMI_SCL", /* GPIOH_1 */
|
|
+ "HDMI_HPD", /* GPIOH_2 */
|
|
+ "HDMI_CEC", /* GPIOH_3 */
|
|
+ "VL-RST_N", /* GPIOH_4 */
|
|
+ "CON1-P36", /* GPIOH_5 */
|
|
+ "VL-PWREN", /* GPIOH_6 */
|
|
+ "WiFi_3V3_1V8", /* GPIOH_7 */
|
|
+ "TFLASH_VDD_EN", /* GPIOH_8 */
|
|
+ /* BOOT */
|
|
+ "eMMC_D0", /* BOOT_0 */
|
|
+ "eMMC_D1", /* BOOT_1 */
|
|
+ "eMMC_D2", /* BOOT_2 */
|
|
+ "eMMC_D3", /* BOOT_3 */
|
|
+ "eMMC_D4", /* BOOT_4 */
|
|
+ "eMMC_D5", /* BOOT_5 */
|
|
+ "eMMC_D6", /* BOOT_6 */
|
|
+ "eMMC_D7", /* BOOT_7 */
|
|
+ "eMMC_CLK", /* BOOT_8 */
|
|
+ "",
|
|
+ "eMMC_CMD", /* BOOT_10 */
|
|
+ "",
|
|
+ "eMMC_RST#", /* BOOT_12 */
|
|
+ "eMMC_DS", /* BOOT_13 */
|
|
+ "", "",
|
|
+ /* GPIOC */
|
|
+ "SD_D0_B", /* GPIOC_0 */
|
|
+ "SD_D1_B", /* GPIOC_1 */
|
|
+ "SD_D2_B", /* GPIOC_2 */
|
|
+ "SD_D3_B", /* GPIOC_3 */
|
|
+ "SD_CLK_B", /* GPIOC_4 */
|
|
+ "SD_CMD_B", /* GPIOC_5 */
|
|
+ "CARD_EN_DET", /* GPIOC_6 */
|
|
+ "",
|
|
+ /* GPIOA */
|
|
+ "", "", "", "", "", "", "", "",
|
|
+ "", "", "", "", "", "",
|
|
+ "CON1-P27", /* GPIOA_14 */
|
|
+ "CON1-P28", /* GPIOA_15 */
|
|
+ /* GPIOX */
|
|
+ "CON1-P16", /* GPIOX_0 */
|
|
+ "CON1-P18", /* GPIOX_1 */
|
|
+ "CON1-P22", /* GPIOX_2 */
|
|
+ "CON1-P11", /* GPIOX_3 */
|
|
+ "CON1-P13", /* GPIOX_4 */
|
|
+ "CON1-P07", /* GPIOX_5 */
|
|
+ "CON1-P33", /* GPIOX_6 */
|
|
+ "CON1-P15", /* GPIOX_7 */
|
|
+ "CON1-P19", /* GPIOX_8 */
|
|
+ "CON1-P21", /* GPIOX_9 */
|
|
+ "CON1-P24", /* GPIOX_10 */
|
|
+ "CON1-P23", /* GPIOX_11 */
|
|
+ "CON1-P08", /* GPIOX_12 */
|
|
+ "CON1-P10", /* GPIOX_13 */
|
|
+ "CON1-P29", /* GPIOX_14 */
|
|
+ "CON1-P31", /* GPIOX_15 */
|
|
+ "CON1-P26", /* GPIOX_16 */
|
|
+ "CON1-P03", /* GPIOX_17 */
|
|
+ "CON1-P05", /* GPIOX_18 */
|
|
+ "CON1-P32"; /* GPIOX_19 */
|
|
+
|
|
+ /*
|
|
+ * WARNING: The USB Hub needs a reset signal to be turned high in
|
|
+ * order to be detected by the USB Controller. This signal should
|
|
+ * be handled by a USB specific power sequence to reset the Hub
|
|
+ * when the USB bus is powered down.
|
|
+ */
|
|
+ usb-hub {
|
|
+ gpio-hog;
|
|
+ gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
|
|
+ output-high;
|
|
+ line-name = "usb-hub-reset";
|
|
+ };
|
|
+};
|
|
+
|
|
+&gpio_ao {
|
|
+ gpio-line-names =
|
|
+ /* GPIOAO */
|
|
+ "DEBUG TX", /* GPIOAO_0 */
|
|
+ "DEBUG RX", /* GPIOAO_1 */
|
|
+ "SYS_LED2", /* GPIOAO_2 */
|
|
+ "UPDATE_KEY", /* GPIOAO_3 */
|
|
+ "CON1-P40", /* GPIOAO_4 */
|
|
+ "IR_IN", /* GPIOAO_5 */
|
|
+ "TF_3V3N_1V8_EN", /* GPIOAO_6 */
|
|
+ "CON1-P35", /* GPIOAO_7 */
|
|
+ "CON1-P12", /* GPIOAO_8 */
|
|
+ "CON1-P37", /* GPIOAO_9 */
|
|
+ "CON1-P38", /* GPIOAO_10 */
|
|
+ "SYS_LED", /* GPIOAO_11 */
|
|
+ /* GPIOE */
|
|
+ "VDDEE_PWM", /* GPIOE_0 */
|
|
+ "VDDCPU_PWM", /* GPIOE_1 */
|
|
+ "TF_PWR_EN"; /* GPIOE_2 */
|
|
+};
|
|
+
|
|
+&hdmi_tx {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ hdmi-supply = <&dc_in>;
|
|
+};
|
|
+
|
|
+&hdmi_tx_tmds_port {
|
|
+ hdmi_tx_tmds_out: endpoint {
|
|
+ remote-endpoint = <&hdmi_connector_in>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&ir {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&remote_input_ao_pins>;
|
|
+ pinctrl-names = "default";
|
|
+};
|
|
+
|
|
+&pwm_AO_cd {
|
|
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ clocks = <&xtal>;
|
|
+ clock-names = "clkin1";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ status = "okay";
|
|
+ vref-supply = <&vddao_1v8>;
|
|
+};
|
|
+
|
|
+/* SD card */
|
|
+&sd_emmc_b {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&sdcard_c_pins>;
|
|
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
|
+ pinctrl-names = "default", "clk-gate";
|
|
+
|
|
+ bus-width = <4>;
|
|
+ cap-sd-highspeed;
|
|
+ max-frequency = <50000000>;
|
|
+ disable-wp;
|
|
+
|
|
+ /* TOFIX: SD card is barely usable in SDR modes */
|
|
+
|
|
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
|
+ vmmc-supply = <&tflash_vdd>;
|
|
+ vqmmc-supply = <&vddio_c>;
|
|
+};
|
|
+
|
|
+/* eMMC */
|
|
+&sd_emmc_c {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
|
+ pinctrl-1 = <&emmc_clk_gate_pins>;
|
|
+ pinctrl-names = "default", "clk-gate";
|
|
+
|
|
+ bus-width = <8>;
|
|
+ cap-mmc-highspeed;
|
|
+ mmc-ddr-1_8v;
|
|
+ mmc-hs200-1_8v;
|
|
+ max-frequency = <200000000>;
|
|
+ disable-wp;
|
|
+
|
|
+ mmc-pwrseq = <&emmc_pwrseq>;
|
|
+ vmmc-supply = <&vddao_3v3>;
|
|
+ vqmmc-supply = <&emmc_1v8>;
|
|
+};
|
|
+
|
|
+&uart_AO {
|
|
+ status = "okay";
|
|
+ pinctrl-0 = <&uart_ao_a_pins>;
|
|
+ pinctrl-names = "default";
|
|
+};
|
|
+
|
|
+&usb {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb2_phy0 {
|
|
+ phy-supply = <&dc_in>;
|
|
+};
|
|
+
|
|
+&usb2_phy1 {
|
|
+ /* Enable the hub which is connected to this port */
|
|
+ phy-supply = <&vl_pwr_en>;
|
|
+};
|
|
--
|
|
2.34.1
|
|
|