build/patch/kernel/archive/rockchip-5.10/1008-ARM-DTS-rk3288-tinker-Setup-the-Bluetooth-UART-pins.patch

63 lines
1.8 KiB
Diff

From 2c2e60256f2cbb2fce50a6317f85b1500efd1a6c Mon Sep 17 00:00:00 2001
From: "Miouyouyou (Myy)" <myy@miouyouyou.fr>
Date: Mon, 5 Nov 2018 22:03:26 +0100
Subject: [PATCH] ARM: DTS: rk3288-tinker: Setup the Bluetooth UART pins
The most essential being the RTS pin, which is clearly needed to
upload the initial configuration into the Realtek Bluetooth
chip, and make the Bluetooth chip work.
Now, the Bluetooth chip also needs 3 other GPIOS to be enabled.
I'll see how I do that through the DTS file in a near future.
The 3 GPIOS being :
Bluetooth Reset : <&gpio4 29 GPIO_ACTIVE_HIGH>
Bluetooth Wake : <&gpio4 26 GPIO_ACTIVE_HIGH>
Bluetooth Wake_Host_IRQ : <&gpio4 31 GPIO_ACTIVE_HIGH>
These are currently setup manually, through scripts. But it seems that
GPIO handling through /sys entries might not be possible in the long
term, the replacement being libgpio.
Anyway, if you're interesting in enabling the Bluetooth GPIO by hand,
here are the commands :
cd /sys/class/gpio &&
echo 146 > export &&
echo 149 > export &&
echo 151 > export &&
echo high > gpio146/direction &&
echo high > gpio149/direction &&
echo high > gpio151/direction
Resetting the chip is done like this :
echo "Resetting the Bluetooth chip"
cd /sys/class/gpio/gpio149 &&
echo 0 > value &&
sleep 1 &&
echo 1 > value &&
sleep 1
Signed-off-by: Miouyouyou (Myy) <myy@miouyouyou.fr>
---
arch/arm/boot/dts/rk3288-tinker.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index d4df13bed..b92e59c1e 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -73,3 +73,9 @@
status = "okay";
supports-sdio;
};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
+};
+
--
2.16.4