477 lines
9.3 KiB
Diff
477 lines
9.3 KiB
Diff
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
|
|
new file mode 100644
|
|
index 000000000..52732643f
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock-pi-e.dts
|
|
@@ -0,0 +1,470 @@
|
|
+/*
|
|
+ * SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
|
+ * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+#include "rk3328.dtsi"
|
|
+#include <dt-bindings/input/input.h>
|
|
+
|
|
+/ {
|
|
+ model = "Radxa ROCK Pi E";
|
|
+ compatible = "radxa,rockpie", "rockchip,rk3328";
|
|
+
|
|
+ fiq_debugger: fiq-debugger {
|
|
+ compatible = "rockchip,fiq-debugger";
|
|
+ rockchip,serial-id = <2>;
|
|
+ rockchip,signal-irq = <159>;
|
|
+ rockchip,wake-irq = <0>;
|
|
+ /* If enable uart uses irq instead of fiq */
|
|
+ rockchip,irq-mode-enable = <0>;
|
|
+ rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
|
|
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gmac_clkin: external-gmac-clock {
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <125000000>;
|
|
+ clock-output-names = "gmac_clkin";
|
|
+ #clock-cells = <0>;
|
|
+ };
|
|
+
|
|
+ sound {
|
|
+ compatible = "simple-audio-card";
|
|
+ simple-audio-card,format = "i2s";
|
|
+ simple-audio-card,mclk-fs = <256>;
|
|
+ simple-audio-card,name = "rockchip,rk3328";
|
|
+ simple-audio-card,cpu {
|
|
+ sound-dai = <&i2s1>;
|
|
+ };
|
|
+ simple-audio-card,codec {
|
|
+ sound-dai = <&codec>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ hdmi-sound {
|
|
+ compatible = "simple-audio-card";
|
|
+ simple-audio-card,format = "i2s";
|
|
+ simple-audio-card,mclk-fs = <128>;
|
|
+ simple-audio-card,name = "rockchip,hdmi";
|
|
+ simple-audio-card,cpu {
|
|
+ sound-dai = <&i2s0>;
|
|
+ };
|
|
+ simple-audio-card,codec {
|
|
+ sound-dai = <&hdmi>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_host_vbus: host-vbus-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&host_vbus_drv>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-name = "vcc_host_vbus";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ };
|
|
+
|
|
+ vcc_phy: vcc-phy-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_phy";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ };
|
|
+
|
|
+ vcc_sd: sdmmc-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0m1_pin>;
|
|
+ regulator-name = "vcc_sd";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ vin-supply = <&vcc_io>;
|
|
+ };
|
|
+
|
|
+ vcc_sys: vcc-sys {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "vcc_sys";
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ };
|
|
+
|
|
+ xin32k: xin32k {
|
|
+ compatible = "fixed-clock";
|
|
+ clock-frequency = <32768>;
|
|
+ clock-output-names = "xin32k";
|
|
+ #clock-cells = <0>;
|
|
+ };
|
|
+
|
|
+ gpio-leds {
|
|
+ compatible = "gpio-leds";
|
|
+ status = "okay";
|
|
+
|
|
+ user-led {
|
|
+ label = "rockpie:user";
|
|
+ gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ default-state = "on";
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&io_domains {
|
|
+ status = "okay";
|
|
+
|
|
+ vccio1-supply = <&vcc_io>;
|
|
+ vccio2-supply = <&vcc_18emmc>;
|
|
+ vccio3-supply = <&vcc_io>;
|
|
+ vccio4-supply = <&vcc_io>;
|
|
+ vccio5-supply = <&vcc_io>;
|
|
+ vccio6-supply = <&vcc_io>;
|
|
+ pmuio-supply = <&vcc_io>;
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_arm>;
|
|
+};
|
|
+
|
|
+&gpu {
|
|
+ status = "okay";
|
|
+ mali-supply = <&vdd_logic>;
|
|
+};
|
|
+
|
|
+&gmac2phy {
|
|
+ phy-supply = <&vcc_phy>;
|
|
+ clock_in_out = "output";
|
|
+ assigned-clocks = <&cru SCLK_MAC2PHY_SRC>;
|
|
+ assigned-clock-rate = <50000000>;
|
|
+ assigned-clocks = <&cru SCLK_MAC2PHY>;
|
|
+ assigned-clock-parents = <&cru SCLK_MAC2PHY_SRC>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&gmac2io {
|
|
+ phy-supply = <&vcc_io>;
|
|
+ phy-mode = "rgmii";
|
|
+ clock_in_out = "input";
|
|
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
+ snps,reset-active-low;
|
|
+ snps,reset-delays-us = <0 10000 50000>;
|
|
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
|
|
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rgmiim1_pins>;
|
|
+ snps,aal;
|
|
+ snps,rxpbl = <0x4>;
|
|
+ snps,txpbl = <0x4>;
|
|
+ tx_delay = <0x26>;
|
|
+ rx_delay = <0x11>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&display_subsystem {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ #sound-dai-cells = <0>;
|
|
+ ddc-i2c-scl-high-time-ns = <9625>;
|
|
+ ddc-i2c-scl-low-time-ns = <10000>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&hdmiphy {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/*&h265e {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&rkvdec {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vepu {
|
|
+ status = "okay";
|
|
+};*/
|
|
+
|
|
+&vop {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&vop_mmu {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+/*&vpu_service {
|
|
+ status = "okay";
|
|
+};*/
|
|
+
|
|
+&i2s0 {
|
|
+ #sound-dai-cells = <0>;
|
|
+ rockchip,bclk-fs = <128>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&i2s1 {
|
|
+ #sound-dai-cells = <0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&codec {
|
|
+ #sound-dai-cells = <0>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&emmc {
|
|
+ bus-width = <8>;
|
|
+ cap-mmc-highspeed;
|
|
+ mmc-hs200-1_8v;
|
|
+ supports-emmc;
|
|
+ disable-wp;
|
|
+ non-removable;
|
|
+ num-slots = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&sdmmc {
|
|
+ bus-width = <4>;
|
|
+ cap-mmc-highspeed;
|
|
+ cap-sd-highspeed;
|
|
+ disable-wp;
|
|
+ max-frequency = <150000000>;
|
|
+ num-slots = <1>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
|
|
+ supports-sd;
|
|
+ status = "okay";
|
|
+ vmmc-supply = <&vcc_sd>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ status = "okay";
|
|
+
|
|
+ rk805: rk805@18 {
|
|
+ compatible = "rockchip,rk805";
|
|
+ status = "okay";
|
|
+ reg = <0x18>;
|
|
+ interrupt-parent = <&gpio2>;
|
|
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pmic_int_l>;
|
|
+ rockchip,system-power-controller;
|
|
+ wakeup-source;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ #clock-cells = <1>;
|
|
+ clock-output-names = "rk805-clkout1", "rk805-clkout2";
|
|
+
|
|
+ vcc1-supply = <&vcc_sys>;
|
|
+ vcc2-supply = <&vcc_sys>;
|
|
+ vcc3-supply = <&vcc_sys>;
|
|
+ vcc4-supply = <&vcc_sys>;
|
|
+ vcc5-supply = <&vcc_io>;
|
|
+ vcc6-supply = <&vcc_io>;
|
|
+
|
|
+ rtc {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ pwrkey {
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ gpio {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ regulators {
|
|
+ compatible = "rk805-regulator";
|
|
+ status = "okay";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ vdd_logic: DCDC_REG1 {
|
|
+ regulator-name = "vdd_logic";
|
|
+ regulator-min-microvolt = <712500>;
|
|
+ regulator-max-microvolt = <1450000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1000000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_arm: DCDC_REG2 {
|
|
+ regulator-name = "vdd_arm";
|
|
+ regulator-min-microvolt = <712500>;
|
|
+ regulator-max-microvolt = <1450000>;
|
|
+ regulator-ramp-delay = <12500>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <950000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_ddr: DCDC_REG3 {
|
|
+ regulator-name = "vcc_ddr";
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_io: DCDC_REG4 {
|
|
+ regulator-name = "vcc_io";
|
|
+ regulator-min-microvolt = <3300000>;
|
|
+ regulator-max-microvolt = <3300000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <3300000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_18: LDO_REG1 {
|
|
+ regulator-name = "vdd_18";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vcc_18emmc: LDO_REG2 {
|
|
+ regulator-name = "vcc_18emmc";
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1800000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_11: LDO_REG3 {
|
|
+ regulator-name = "vdd_11";
|
|
+ regulator-min-microvolt = <1100000>;
|
|
+ regulator-max-microvolt = <1100000>;
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-state-mem {
|
|
+ regulator-on-in-suspend;
|
|
+ regulator-suspend-microvolt = <1100000>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pinctrl {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&wifi_enable>;
|
|
+
|
|
+ wifi {
|
|
+ wifi_enable: wifi-enable {
|
|
+ rockchip,pins =
|
|
+ <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pmic {
|
|
+ pmic_int_l: pmic-int-l {
|
|
+ rockchip,pins =
|
|
+ <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio2_a6 */
|
|
+ };
|
|
+ };
|
|
+
|
|
+ usb {
|
|
+ host_vbus_drv: host-vbus-drv {
|
|
+ rockchip,pins =
|
|
+ <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&u2phy {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy_host {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&u2phy_otg {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+&uart2 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb20_otg {
|
|
+ dr_mode = "host";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ehci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usb_host0_ohci {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+
|
|
+&usbdrd3 {
|
|
+ dr_mode = "host";
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&wdt {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&saradc {
|
|
+ status = "okay";
|
|
+ vref-supply = <&vdd_18>;
|
|
+};
|
|
+
|
|
+&tsadc {
|
|
+ status = "okay";
|
|
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
|
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
|
+};
|